With fourth pin added for iDisp for skl_dai, update SOF_SKL_DAI_NUM to
account for the change. Without this, dais from the bottom of the list
are skipped. In current state that's the case for 'Alt Analog CPU DAI'.
Fixes: ac42b142cd76 ("ASoC: SOF: Intel: hda: Add iDisp4 DAI")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113114054.9716-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correctly link both channels on the DAC if an output muxed between a
stereo and mono output. Without this one channel of the DAC may be
erroneously powered down whilst in mono mode.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200114161841.451-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recently added API that exposes firmware mixer controls to the
kernel is missing cache handling and all writes bypass the cache, this
obviously causes the cache to get out of sync with the hardware. Factor
out the cache handling into two new helper functions and call those from
both the normal ALSA control handlers and the new kernel API.
Fixes: eb65ccdb08 ("ASoC: wm_adsp: Expose mixer control API")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200114161841.451-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for NULL port data in the modem- and line-status handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe).
Note that the other (stubbed) event handlers qt2_process_xmit_empty()
and qt2_process_flush() would need similar sanity checks in case they
are ever implemented.
Fixes: f7a33e608d ("USB: serial: add quatech2 usb to serial driver")
Cc: stable <stable@vger.kernel.org> # 3.5
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Check for NULL port data in the control URB completion handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe()).
Fixes: 0ca1268e10 ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver receives the active port number from the device, but never
made sure that the port number was valid. This could lead to a
NULL-pointer dereference or memory corruption in case a device sends
data for an invalid port.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Check for NULL port data in the shared interrupt and bulk completion
callbacks to avoid dereferencing a NULL pointer in case a device sends
data for a port device which isn't bound to a driver (e.g. due to a
malicious device having unexpected endpoints or after an allocation
failure on port probe).
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Check for NULL port data in reset_resume() to avoid dereferencing a NULL
pointer in case the port device isn't bound to a driver (e.g. after a
failed control request at port probe).
Fixes: 1ded7ea47b ("USB: ch341 serial: fix port number changed after resume")
Cc: stable <stable@vger.kernel.org> # 2.6.30
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The low resolution parts of the VDSO, i.e.:
clock_gettime(CLOCK_*_COARSE), clock_getres(), time()
can be used even if there is no VDSO capable clocksource.
But if an architecture opts out of the VDSO data update then this
information becomes stale. This affects ARM when there is no architected
timer available. The lack of update causes userspace to use stale data
forever.
Make the update of the low resolution parts unconditional and only skip
the update of the high resolution parts if the architecture requests it.
Fixes: 44f57d788e ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.765577901@linutronix.de
The function name suggests that this is a boolean checking whether the
architecture asks for an update of the VDSO data, but it works the other
way round. To spare further confusion invert the logic.
Fixes: 44f57d788e ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.656652824@linutronix.de
The counters obj_pool_free, and obj_nr_tofree, and the flag obj_freeing are
read locklessly outside the pool_lock critical sections. If read with plain
accesses, this would result in data races.
This is addressed as follows:
* reads outside critical sections become READ_ONCE()s (pairing with
WRITE_ONCE()s added);
* writes become WRITE_ONCE()s (pairing with READ_ONCE()s added); since
writes happen inside critical sections, only the write and not the read
of RMWs needs to be atomic, thus WRITE_ONCE(var, var +/- X) is
sufficient.
The data races were reported by KCSAN:
BUG: KCSAN: data-race in __free_object / fill_pool
write to 0xffffffff8beb04f8 of 4 bytes by interrupt on cpu 1:
__free_object+0x1ee/0x8e0 lib/debugobjects.c:404
__debug_check_no_obj_freed+0x199/0x330 lib/debugobjects.c:969
debug_check_no_obj_freed+0x3c/0x44 lib/debugobjects.c:994
slab_free_hook mm/slub.c:1422 [inline]
read to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 2:
fill_pool+0x3d/0x520 lib/debugobjects.c:135
__debug_object_init+0x3c/0x810 lib/debugobjects.c:536
debug_object_init lib/debugobjects.c:591 [inline]
debug_object_activate+0x228/0x320 lib/debugobjects.c:677
debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]
BUG: KCSAN: data-race in __debug_object_init / fill_pool
read to 0xffffffff8beb04f8 of 4 bytes by task 10 on cpu 6:
fill_pool+0x3d/0x520 lib/debugobjects.c:135
__debug_object_init+0x3c/0x810 lib/debugobjects.c:536
debug_object_init_on_stack+0x39/0x50 lib/debugobjects.c:606
init_timer_on_stack_key kernel/time/timer.c:742 [inline]
write to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 3:
alloc_object lib/debugobjects.c:258 [inline]
__debug_object_init+0x717/0x810 lib/debugobjects.c:544
debug_object_init lib/debugobjects.c:591 [inline]
debug_object_activate+0x228/0x320 lib/debugobjects.c:677
debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]
BUG: KCSAN: data-race in free_obj_work / free_object
read to 0xffffffff9140c190 of 4 bytes by task 10 on cpu 6:
free_object+0x4b/0xd0 lib/debugobjects.c:426
debug_object_free+0x190/0x210 lib/debugobjects.c:824
destroy_timer_on_stack kernel/time/timer.c:749 [inline]
write to 0xffffffff9140c190 of 4 bytes by task 93 on cpu 1:
free_obj_work+0x24f/0x480 lib/debugobjects.c:313
process_one_work+0x454/0x8d0 kernel/workqueue.c:2264
worker_thread+0x9a/0x780 kernel/workqueue.c:2410
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200116185529.11026-1-elver@google.com
The fstest btrfs/154 reports
[ 8675.381709] BTRFS: Transaction aborted (error -28)
[ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935
[ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.402672] RSP: 0018:ffffb2090888fb00 EFLAGS: 00010286
[ 8675.404413] RAX: 0000000000000000 RBX: ffff92026dfa91c8 RCX: 0000000000000001
[ 8675.406609] RDX: 0000000000000000 RSI: ffffffff8e100899 RDI: ffffffff8e100971
[ 8675.408775] RBP: ffff920247c61660 R08: 0000000000000000 R09: 0000000000000000
[ 8675.410978] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffe4
[ 8675.412647] R13: ffff92026db74000 R14: ffff920247c616b8 R15: ffff92026dfbc000
[ 8675.413994] FS: 00007fd5e57248c0(0000) GS:ffff92027d800000(0000) knlGS:0000000000000000
[ 8675.416146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8675.417833] CR2: 0000564aa51682d8 CR3: 000000006dcbc004 CR4: 0000000000160ee0
[ 8675.419801] Call Trace:
[ 8675.420742] btrfs_start_dirty_block_groups+0x355/0x480 [btrfs]
[ 8675.422600] btrfs_commit_transaction+0xc8/0xaf0 [btrfs]
[ 8675.424335] reset_balance_state+0x14a/0x190 [btrfs]
[ 8675.425824] btrfs_balance.cold+0xe7/0x154 [btrfs]
[ 8675.427313] ? kmem_cache_alloc_trace+0x235/0x2c0
[ 8675.428663] btrfs_ioctl_balance+0x298/0x350 [btrfs]
[ 8675.430285] btrfs_ioctl+0x466/0x2550 [btrfs]
[ 8675.431788] ? mem_cgroup_charge_statistics+0x51/0xf0
[ 8675.433487] ? mem_cgroup_commit_charge+0x56/0x400
[ 8675.435122] ? do_raw_spin_unlock+0x4b/0xc0
[ 8675.436618] ? _raw_spin_unlock+0x1f/0x30
[ 8675.438093] ? __handle_mm_fault+0x499/0x740
[ 8675.439619] ? do_vfs_ioctl+0x56e/0x770
[ 8675.441034] do_vfs_ioctl+0x56e/0x770
[ 8675.442411] ksys_ioctl+0x3a/0x70
[ 8675.443718] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 8675.445333] __x64_sys_ioctl+0x16/0x20
[ 8675.446705] do_syscall_64+0x50/0x210
[ 8675.448059] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left
We now use btrfs_can_overcommit() to see if we can flip a block group
read only. Before this would fail because we weren't taking into
account the usable un-allocated space for allocating chunks. With my
patches we were allowed to do the balance, which is technically correct.
The test is trying to start balance on degraded mount. So now we're
trying to allocate a chunk and cannot because we want to allocate a
RAID1 chunk, but there's only 1 device that's available for usage. This
results in an ENOSPC.
But we shouldn't even be making it this far, we don't have enough
devices to restripe. The problem is we're using btrfs_num_devices(),
that also includes missing devices. That's not actually what we want, we
need to use rw_devices.
The chunk_mutex is not needed here, rw_devices changes only in device
add, remove or replace, all are excluded by EXCL_OP mechanism.
Fixes: e4d8ec0f65 ("Btrfs: implement online profile changing")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add stacktrace, update changelog, drop chunk_mutex ]
Signed-off-by: David Sterba <dsterba@suse.com>
If scrub returns an error we are not copying back the scrub arguments
structure to user space. This prevents user space to know how much
progress scrub has done if an error happened - this includes -ECANCELED
which is returned when users ask for scrub to stop. A particular use
case, which is used in btrfs-progs, is to resume scrub after it is
canceled, in that case it relies on checking the progress from the scrub
arguments structure and then use that progress in a call to resume
scrub.
So fix this by always copying the scrub arguments structure to user
space, overwriting the value returned to user space with -EFAULT only if
copying the structure failed to let user space know that either that
copying did not happen, and therefore the structure is stale, or it
happened partially and the structure is probably not valid and corrupt
due to the partial copy.
Reported-by: Graham Cobb <g.btrfs@cobb.uk.net>
Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/
Fixes: 06fe39ab15 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Graham Cobb <g.btrfs@cobb.uk.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the kernel is configured with CONFIG_NR_CPUS smaller than the
number of CPU nodes in the device tree(DT), all the CPU nodes parsing
done to fetch topology information will fail. This is not reasonable
as it is legal to have all the physical CPUs in the system in the DT.
Let us just skip such CPU DT nodes that are not used in the kernel
rather than returning an error.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1579225973-32423-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Don't send the PPAG command when PPAG is disabled, since it can
cause problems;
* A few fixes for a HW bug;
* A fix for RS offload;
* A fix for 3168 devices where the NVM tables where the wrong tables
were being read.
* Fix a couple of potential memory leaks in TXQ code;
* Disable L0S states in all hardware since our hardware doesn't
officially support them anymore (and older versions of the hardware
had instability in these states);
* Remove lar_disable parameter since it has been causing issues for
some people who erroneously disable it;
* Force the debug monitor HW to stop also when debug is disabled,
since it sometimes stays on and prevents low system power states;
-----BEGIN PGP SIGNATURE-----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=8Wqs
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-for-kalle-2020-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
First batch of fixes intended for v5.5
* Don't send the PPAG command when PPAG is disabled, since it can
cause problems;
* A few fixes for a HW bug;
* A fix for RS offload;
* A fix for 3168 devices where the NVM tables where the wrong tables
were being read.
* Fix a couple of potential memory leaks in TXQ code;
* Disable L0S states in all hardware since our hardware doesn't
officially support them anymore (and older versions of the hardware
had instability in these states);
* Remove lar_disable parameter since it has been causing issues for
some people who erroneously disable it;
* Force the debug monitor HW to stop also when debug is disabled,
since it sometimes stays on and prevents low system power states;
This reverts the GPIOLIB_IRQCHIP in the ThunderX driver.
ThunderX is a piece of Arm-based server chip. I converted the driver to
hierarchical gpiochip without access to real silicon and failed miserably
since I didn't take MSI's into account.
Kevin Hao helpfully stepped in and fixed it properly, let's revert it for
v5.5 and put the proper conversion into v5.6.
-----BEGIN PGP SIGNATURE-----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=nDpR
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This reverts the GPIOLIB_IRQCHIP in the ThunderX driver.
ThunderX is a piece of Arm-based server chip. I converted the driver
to hierarchical gpiochip without access to real silicon and failed
miserably since I didn't take MSI's into account.
Kevin Hao helpfully stepped in and fixed it properly, let's revert it
for v5.5 and put the proper conversion into v5.6"
* tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
As we now have "ct" available almost in all functions we can
start using dev variants of logs also for debug.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-6-michal.wajdeczko@intel.com
As we now have "ct" available in ct_read function we can switch
from generic DRM_ERROR to our custom CT_ERROR.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-5-michal.wajdeczko@intel.com
Since we only have one RECV buffer we don't need to explicitly pass
it to the read function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-4-michal.wajdeczko@intel.com
Since we only have one SEND buffer we don't need to explicitly pass
it to the write function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-3-michal.wajdeczko@intel.com
We should never BUG_ON on any corruption in CTB descriptor as
data there can be also modified by the GuC. Instead we can
use flag "is_in_error" to indicate that we will not process
any further messages over this CTB (until reset). While here
move descriptor error reporting to the function that actually
touches that descriptor.
Note that unexpected content of the specific CT messages, that
still complies with generic CT message format, shall not trigger
disabling whole CTB, as that might just indicate new unsupported
message types.
v2: drop redundant message (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-2-michal.wajdeczko@intel.com
-----BEGIN PGP SIGNATURE-----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=f1JW
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this release:
- The 32-bit segment size fix that I mentioned last week (Ming)
- Use uint for the block size (Mikulas)
- A null_blk zone write handling fix (Damien)"
* tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
block: fix an integer overflow in logical block size
null_blk: Fix zone write handling
block: fix get_max_segment_size() overflow on 32bit arch
That bit is documented in TLFS 5.0c as follows:
Setting the polling bit will have the effect of unmasking an
interrupt source, except that an actual interrupt is not generated.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20191222233404.1629-1-wei.liu@kernel.org
When CONFIG_PROC_FS is disabled, the compiler warns about an unused
variable:
arch/x86/kernel/apic/x2apic_uv_x.c: In function 'uv_setup_proc_files':
arch/x86/kernel/apic/x2apic_uv_x.c:1546:8: error: unused variable 'name' [-Werror=unused-variable]
char *name = hubless ? "hubless" : "hubbed";
Simplify the code so this variable is no longer needed.
Fixes: 8785968bce ("x86/platform/uv: Add UV Hubbed/Hubless Proc FS Files")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191212140419.315264-1-arnd@arndb.de
Smatch worries that the engine->mask may be 0 leading to the loop being
shortcircuited leaving the next pointer unset,
drivers/gpu/drm/i915/i915_active.c:667 i915_active_acquire_preallocate_barrier() error: uninitialized symbol 'next'.
Assert that mask is not 0 and smatch can then verify that next must be
initialised before use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117110603.2982286-1-chris@chris-wilson.co.uk
The kernel stashes the current task struct in sp_el0 so that this can be
acquired consistently/cheaply when required. When we take an exception
from EL0 we have to:
1) stash the original sp_el0 value
2) find the current task
3) update sp_el0 with the current task pointer
Currently steps #1 and #2 occur in one place, and step #3 a while later.
As the value of sp_el0 is immaterial between these points, let's move
them together to make the code clearer and minimize ifdeffery. This
necessitates moving the comment for MDSCR_EL1.SS.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
For most of the exception entry code, <foo>_handler() is the first C
function called from the entry assembly in entry-common.c, and external
functions handling the bulk of the logic are called do_<foo>().
For consistency, apply this scheme to el0_svc_handler and
el0_svc_compat_handler, renaming them to do_el0_svc and
do_el0_svc_compat respectively.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Almost all functions in entry-common.c are marked notrace, with
el1_undef and el1_inv being the only exceptions. We appear to have done
this on the assumption that there were no exception registers that we
needed to snapshot, and thus it was safe to run trace code that might
result in further exceptions and clobber those registers.
However, until we inherit the DAIF flags, our irq flag tracing is stale,
and this discrepancy could set off warnings in some configurations. For
example if CONFIG_DEBUG_LOCKDEP is selected and a trace function calls
into any flag-checking locking routines. Given we don't expect to
trigger el1_undef or el1_inv unless something is already wrong, any
irqflag warnigns are liable to mask the information we'd actually care
about.
Let's keep things simple and mark el1_undef and el1_inv as notrace.
Developers can trace do_undefinstr and bad_mode if they really want to
monitor these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
These days arm64 kernels are always SMP, and thus smp_dmb is an
overly-long way of writing dmb. Naturally, no-one uses it.
Remove the unused macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
We haven't needed the inherit_daif macro since commit:
ed3768db58 ("arm64: entry: convert el1_sync to C")
... which converted all callers to C and the local_daif_inherit
function.
Remove the unused macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
A forgetful copy'n'paste left the name of the old function intact, and
did not introduce the new function 'i915_request_is_ready'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117101639.2908469-1-chris@chris-wilson.co.uk
Since commit 742379c0c4 ("drm/i915: Start chopping up the GPU error
capture"), function 'i915_error_state_store' was defined and used with
only one parameter.
But if no 'CONFIG_DRM_I915_CAPTURE_ERROR', this function was defined
with two parameter.
This may lead compile error. This patch fix it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117073436.6507-1-zhangxiaoxu5@huawei.com
drivers/gpu/drm/i915/i915_debugfs_params.c:228:15: warning: symbol 'i915_debugfs_params' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_debugfs_params.c:228:16: error: no previous prototype for ‘i915_debugfs_params’ [-Werror=missing-prototypes]
228 | struct dentry *i915_debugfs_params(struct drm_i915_private *i915)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: c43c5a8818 ("drm/i915/params: add i915 parameters to debugfs")
Link: https://patchwork.freedesktop.org/patch/msgid/20200117102145.2948244-1-chris@chris-wilson.co.uk
The IORT specification [0] (Section 3, table 4, page 9) defines the
'Number of IDs' as 'The number of IDs in the range minus one'.
However, the IORT ID mapping function iort_id_map() treats the 'Number
of IDs' field as if it were the full IDs mapping count, with the
following check in place to detect out of boundary input IDs:
InputID >= Input base + Number of IDs
This check is flawed in that it considers the 'Number of IDs' field as
the full number of IDs mapping and disregards the 'minus one' from
the IDs count.
The correct check in iort_id_map() should be implemented as:
InputID > Input base + Number of IDs
this implements the specification correctly but unfortunately it breaks
existing firmwares that erroneously set the 'Number of IDs' as the full
IDs mapping count rather than IDs mapping count minus one.
e.g.
PCI hostbridge mapping entry 1:
Input base: 0x1000
ID Count: 0x100
Output base: 0x1000
Output reference: 0xC4 //ITS reference
PCI hostbridge mapping entry 2:
Input base: 0x1100
ID Count: 0x100
Output base: 0x2000
Output reference: 0xD4 //ITS reference
Two mapping entries which the second entry's Input base = the first
entry's Input base + ID count, so for InputID 0x1100 and with the
correct InputID check in place in iort_id_map() the kernel would map
the InputID to ITS 0xC4 not 0xD4 as it would be expected.
Therefore, to keep supporting existing flawed firmwares, introduce a
workaround that instructs the kernel to use the old InputID range check
logic in iort_id_map(), so that we can support both firmwares written
with the flawed 'Number of IDs' logic and the correct one as defined in
the specifications.
[0]: http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf
Reported-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Link: https://lore.kernel.org/linux-acpi/20191215203303.29811-1-pankaj.bansal@nxp.com/
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The asm-generic/mman.h definitions are used by a few architectures that
also define arch-specific PROT flags with value 0x10 and 0x20. This
currently applies to sparc and powerpc for 0x10, while arm64 will soon
join with 0x10 and 0x20.
To help future maintainers, document the use of this flag in the
asm-generic header too.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
[catalin.marinas@arm.com: reserve 0x20 as well]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the arm64 __cpu_setup has hard-coded constants for the memory
attributes that go into the MAIR_EL1 register. Define proper macros in
asm/sysreg.h and make use of them in proc.S.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The "silver" KRYO3XX and KRYO4XX CPU cores are not affected by Spectre
variant 2. Add them to spectre_v2 safe list to correct the spurious
ARM_SMCCC_ARCH_WORKAROUND_1 warning and vulnerability status reported
under sysfs.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
[will: tweaked commit message to remove stale mention of "gold" cores]
Signed-off-by: Will Deacon <will@kernel.org>
We would not be transmitting using the correct SYSTEMPORT transmit queue
during ndo_select_queue() which looks up the internal TX ring map
because while establishing the mapping we would be off by 4, so for
instance, when we populate switch port mappings we would be doing:
switch port 0, queue 0 -> ring index #0
switch port 0, queue 1 -> ring index #1
...
switch port 0, queue 3 -> ring index #3
switch port 1, queue 0 -> ring index #8 (4 + 4 * 1)
...
instead of using ring index #4. This would cause our ndo_select_queue()
to use the fallback queue mechanism which would pick up an incorrect
ring for that switch port. Fix this by using the correct switch queue
number instead of SYSTEMPORT queue number.
Fixes: 25c4407046 ("net: systemport: Simplify queue mapping logic")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the implementation of the system reset controller we lost a setting
that is currently applied by the bootloader and which configures the IMP
port for 2Gb/sec, the default is 1Gb/sec. This is needed given the
number of ports and applications we expect to run so bring back that
setting.
Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark function parameters as 'const' where possible.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sja1105_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.
Fixes: 8aa9ebccae ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The felix_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.
Fixes: bdeced75b1 ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some PHYs like VSC8234 don't like it when AN restarts on their system side
and they restart line side AN too, going into an endless link up/down loop.
Don't restart PCS AN if link is up already.
Although in theory this feedback loop should be possible with the other
in-band AN modes too, for some reason it was not seen with the VSC8514
QSGMII and AQR412 USXGMII PHYs. So keep this logic only for SGMII where
the problem was found.
Fixes: bdeced75b1 ("net: dsa: felix: Add PCS operations for PHYLINK")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At least some PHYs (AQR412) don't advertise copper-side link status
during system side AN.
So remove this duplicate assignment to pcs->link and rely on the
previous one for link state: the local indication from the MAC PCS.
Fixes: bdeced75b1 ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver is named "mlxsw", not "mlx5".
Fixes: d4255d7585 ("devlink: document info versions for each driver")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On machines which do not populate all nodes with DIMMs, the driver
doesn't initialize an instance there. However, the instance removal
remove_one_instance() path will warn unconditionally, which is wrong.
Remove the WARN_ON() even if the warning is innocent because it causes a
splat in dmesg.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200117115939.5524-1-bp@alien8.de
Turns out we actually already have some companies, such as Lenovo,
shipping machines with AMOLED screens that don't allow controlling the
backlight through the usual PWM interface and only allow controlling it
through the standard EDP DPCD interface. One example of one of these
laptops is the X1 Extreme 2nd Generation.
Since we've got systems that need this turned on by default now to have
backlight controls working out of the box, let's start auto-detecting it
for systems by default based on what the VBT tells us. We do this by
changing the default value for the enable_dpcd_backlight module param
from 0 to -1.
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-6-lyude@redhat.com
For eDP panels, it appears it's expected that so long as the panel is in
DPCD control mode that the brightness value is never set to 0. Instead,
if the desired effect is to set the panel's backlight to 0 we're
expected to simply turn off the backlight through the
DP_EDP_DISPLAY_CONTROL_REGISTER.
We already do the latter correctly in intel_dp_aux_disable_backlight().
But, we make the mistake of writing the DPCD registers in the wrong
order when enabling the backlight in intel_dp_aux_enable_backlight()
since we currently enable the backlight through
DP_EDP_DISPLAY_CONTROL_REGISTER before writing the brightness level. On
the X1 Extreme 2nd Generation, this appears to have the potential of
confusing the panel in such a way that further attempts to set the
brightness don't actually change the backlight as expected and leave it
off. Presumably, this happens because the incorrect register writing
order briefly leaves the panel with DPCD mode enabled and a 0 brightness
level set.
So, reverse the order we write the DPCD registers when enabling the
panel backlight so that we write the brightness value first, and enable
the backlight second. This fix appears to be the final bit needed to get
the backlight on the ThinkPad X1 Extreme 2nd Generation's AMOLED screen
working.
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-4-lyude@redhat.com
Currently we always determine the initial panel brightness level by
simply reading the value from DP_EDP_BACKLIGHT_BRIGHTNESS_MSB/LSB. This
seems wrong though, because if the panel is not currently in DPCD
control mode there's not really any reason why there would be any
brightness value programmed in the first place.
This appears to be the case on the Lenovo ThinkPad X1 Extreme 2nd
Generation, where the default value in these registers is always 0 on
boot despite the fact the panel runs at max brightness by default.
Getting the initial brightness value correct here is important as well,
since the panel on this laptop doesn't behave well if it's ever put into
DPCD control mode while the brightness level is programmed to 0.
So, let's fix this by checking what the current backlight control mode
is before reading the brightness level. If it's in DPCD control mode, we
return the programmed brightness level. Otherwise we assume 100%
brightness and return the highest possible brightness level. This also
prevents us from accidentally programming a brightness level of 0.
This is one of the many fixes that gets backlight controls working on
the ThinkPad X1 Extreme 2nd Generation with optional 4K AMOLED screen.
Changes since v1:
* s/DP_EDP_DISPLAY_CONTROL_REGISTER/DP_EDP_BACKLIGHT_MODE_SET_REGISTER/
- Jani
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-3-lyude@redhat.com
Max backlight value for the panel was being calculated using byte
count i.e. 0xffff if 2 bytes are supported for backlight brightness
and 0xff if 1 byte is supported. However, EDP_PWMGEN_BIT_COUNT
determines the number of active control bits used for the brightness
setting. Thus, even if the panel uses 2 byte setting, it might not use
all the control bits. Thus, max backlight should be set based on the
value of EDP_PWMGEN_BIT_COUNT instead of assuming 65535 or 255.
Additionally, EDP_PWMGEN_BIT_COUNT was being updated based on the VBT
frequency which results in a different max backlight value. Thus,
setting of EDP_PWMGEN_BIT_COUNT is moved to setup phase instead of
enable so that max backlight can be calculated correctly. Only the
frequency divider is set during the enable phase using the value of
EDP_PWMGEN_BIT_COUNT.
This is based off the original patch series from Furquan Shaikh
<furquan@google.com>:
https://patchwork.freedesktop.org/patch/317255/?series=62326&rev=3
Changes since original patch:
* Remove unused intel_dp variable in intel_dp_aux_setup_backlight()
* Fix checkpatch issues
* Make sure that we rewrite the pwmgen bit count whenever we bring the
panel out of D3 mode
v2 by Jani:
* rebase
* fix readb return value check
Cc: Furquan Shaikh <furquan@google.com>
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-2-lyude@redhat.com
