arch/powerpc/platforms/cell/spufs/inode.c:201:22:
warning: variable ctx set but not used [-Wunused-but-set-variable]
It is not used since commit 67cba9fd64 ("move
spu_forget() into spufs_rmdir()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191023134423.15052-1-yuehaibing@huawei.com
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190711141818.18044-1-yuehaibing@huawei.com
Fix sparse warnings:
arch/powerpc/platforms/powernv/opal-psr.c:20:1:
warning: symbol 'psr_mutex' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-psr.c:27:3:
warning: symbol 'psr_attrs' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-powercap.c:20:1:
warning: symbol 'powercap_mutex' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-sensor-groups.c:20:1:
warning: symbol 'sg_mutex' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190702131733.44100-1-yuehaibing@huawei.com
These Kconfig options has been removed in commit 4c145dce26 ("xfrm:
make xfrm modes builtin") So there is no point to keep it in
defconfigs any longer.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[mpe: Extract from cross arch patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190218133950.95225-1-yuehaibing@huawei.com
There is no need to have the 'struct dentry *vpa_dir' variable static
since new value always be assigned before use it.
Fixes: c6c26fb55e ("powerpc/pseries: Export raw per-CPU VPA data via debugfs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190218125644.87448-1-yuehaibing@huawei.com
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1545705876-63132-1-git-send-email-yuehaibing@huawei.com
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1543498518-107601-1-git-send-email-yuehaibing@huawei.com
rtas_parse_epow_errlog() should pass 'modifier' to
handle_system_shutdown, because event modifier only use
bottom 4 bits.
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191023134838.21280-1-yuehaibing@huawei.com
On the 8xx, signals are generated after executing the instruction. So
no need to manually single-step on 8xx. Also, 8xx __set_dabr()
currently ignores length and hardcodes the length to 8 bytes. So all
unaligned and 512 byte testcase will fail on 8xx. Ignore those
testcases on 8xx.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-8-ravi.bangoria@linux.ibm.com
So far we used to ignore exception if DAR points outside of user
specified range. But now we are ignoring it only if actual load/store
range does not overlap with user specified range. Include selftests
for the same:
# ./tools/testing/selftests/powerpc/ptrace/perf-hwbreak
...
TESTED: No overlap
TESTED: Partial overlap
TESTED: Partial overlap
TESTED: No overlap
TESTED: Full overlap
success: perf_hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-7-ravi.bangoria@linux.ibm.com
ptrace-hwbreak.c selftest is logically broken. On powerpc, when
watchpoint is created with ptrace, signals are generated before
executing the instruction and user has to manually singlestep the
instruction with watchpoint disabled, which selftest never does and
thus it keeps on getting the signal at the same instruction. If we fix
it, selftest fails because the logical connection between
tracer(parent) and tracee(child) is also broken. Rewrite the selftest
and add new tests for unaligned access.
With patch:
$ ./tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak
test: ptrace-hwbreak
tags: git_version:powerpc-5.3-4-224-g218b868240c7-dirty
PTRACE_SET_DEBUGREG, WO, len: 1: Ok
PTRACE_SET_DEBUGREG, WO, len: 2: Ok
PTRACE_SET_DEBUGREG, WO, len: 4: Ok
PTRACE_SET_DEBUGREG, WO, len: 8: Ok
PTRACE_SET_DEBUGREG, RO, len: 1: Ok
PTRACE_SET_DEBUGREG, RO, len: 2: Ok
PTRACE_SET_DEBUGREG, RO, len: 4: Ok
PTRACE_SET_DEBUGREG, RO, len: 8: Ok
PTRACE_SET_DEBUGREG, RW, len: 1: Ok
PTRACE_SET_DEBUGREG, RW, len: 2: Ok
PTRACE_SET_DEBUGREG, RW, len: 4: Ok
PTRACE_SET_DEBUGREG, RW, len: 8: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, WO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RW, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, DAR OUTSIDE, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, DAWR_MAX_LEN, RW, len: 512: Ok
success: ptrace-hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-6-ravi.bangoria@linux.ibm.com
On powerpc, watchpoint match range is double-word granular. On a
watchpoint hit, DAR is set to the first byte of overlap between actual
access and watched range. And thus it's quite possible that DAR does
not point inside user specified range. Ex, say user creates a
watchpoint with address range 0x1004 to 0x1007. So hw would be
configured to watch from 0x1000 to 0x1007. If there is a 4 byte access
from 0x1002 to 0x1005, DAR will point to 0x1002 and thus interrupt
handler considers it as extraneous, but it's actually not, because
part of the access belongs to what user has asked.
Instead of blindly ignoring the exception, get actual address range by
analysing an instruction, and ignore only if actual range does not
overlap with user specified range.
Note: The behavior is unchanged for 8xx.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-5-ravi.bangoria@linux.ibm.com
ptrace_set_debugreg() does not consider new length while overwriting
the watchpoint. Fix that. ppc_set_hwdebug() aligns watchpoint address
to doubleword boundary but does not change the length. If address
range is crossing doubleword boundary and length is less then 8, we
will lose samples from second doubleword. So fix that as well.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-4-ravi.bangoria@linux.ibm.com
Watchpoint match range is always doubleword(8 bytes) aligned on
powerpc. If the given range is crossing doubleword boundary, we need
to increase the length such that next doubleword also get
covered. Ex,
address len = 6 bytes
|=========.
|------------v--|------v--------|
| | | | | | | | | | | | | | | | |
|---------------|---------------|
<---8 bytes--->
In such case, current code configures hw as:
start_addr = address & ~HW_BREAKPOINT_ALIGN
len = 8 bytes
And thus read/write in last 4 bytes of the given range is ignored.
Fix this by including next doubleword in the length.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-3-ravi.bangoria@linux.ibm.com
The issue was showing "Mitigation" message via sysfs whatever the
state of "RFI Flush", but it should show "Vulnerable" when it is
disabled.
If you have "L1D private" feature enabled and not "RFI Flush" you are
vulnerable to meltdown attacks.
"RFI Flush" is the key feature to mitigate the meltdown whatever the
"L1D private" state.
SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.
So the message should be as the truth table shows:
CPU | L1D private | RFI Flush | sysfs
----|-------------|-----------|-------------------------------------
P9 | False | False | Vulnerable
P9 | False | True | Mitigation: RFI Flush
P9 | True | False | Vulnerable: L1D private per thread
P9 | True | True | Mitigation: RFI Flush, L1D private per thread
P8 | False | False | Vulnerable
P8 | False | True | Mitigation: RFI Flush
Output before this fix:
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: RFI Flush, L1D private per thread
# echo 0 > /sys/kernel/debug/powerpc/rfi_flush
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: L1D private per thread
Output after fix:
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: RFI Flush, L1D private per thread
# echo 0 > /sys/kernel/debug/powerpc/rfi_flush
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Vulnerable: L1D private per thread
Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
The stress test for vpmsum implementations executes a long for loop in
the kernel. This blocks the scheduler, which prevents other tasks from
running, resulting in a warning.
This fix adds a call to cond_reshed() at the end of each loop, which
allows the scheduler to run other tasks as required.
Signed-off-by: Chris Smart <chris.smart@humanservices.gov.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191103233356.5472-1-chris.smart@humanservices.gov.au
Let's allow to test the implementation without needing HW support.
When "simulate=1" is specified when loading the module, we bypass all
HW checks and HW calls. The sysfs file "simulate_loan_target_kb" can
be used to simulate HW requests.
The simualtion mode can be activated using:
modprobe cmm debug=1 simulate=1
And the requested loan target can be changed using:
echo X > /sys/devices/system/cmm/cmm0/simulate_loan_target_kb
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-11-david@redhat.com
balloon_page_alloc() will use GFP_HIGHUSER_MOVABLE in case we have
CONFIG_BALLOON_COMPACTION. This is now possible, as balloon pages are
movable with CONFIG_BALLOON_COMPACTION. Without
CONFIG_BALLOON_COMPACTION, GFP_HIGHUSER is used.
Note that apart from that, balloon_page_alloc() uses the following
flags:
__GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN
And current code used:
GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC
GFP_HIGHUSER/GFP_HIGHUSER_MOVABLE include
__GFP_RECLAIM | __GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM
GFP_NOIO is __GFP_RECLAIM.
With CONFIG_BALLOON_COMPACTION, we essentially add:
__GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM | __GFP_MOVABLE
Without CONFIG_BALLOON_COMPACTION, we essentially add:
__GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM
I assume this is fine, as this is what all other balloon compaction
users use. If it turns out to be a problem, we could add __GFP_MOVABLE
manually if we have CONFIG_BALLOON_COMPACTION.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-10-david@redhat.com
We can now get rid of the cmm_lock and completely rely on the balloon
compaction internals, which now also manage the page list and the
lock.
Inflated/"loaned" pages are now movable. Memory blocks that contain
such pages can get offlined. Also, all such pages will be marked
PageOffline() and can therefore be excluded in memory dumps using
recent versions of makedumpfile.
Don't switch to balloon_page_alloc() yet (due to the GFP_NOIO). Will
do that separately to discuss this change in detail.
Signed-off-by: David Hildenbrand <david@redhat.com>
[mpe: Add isolated_pages-- in cmm_migratepage() as suggested by David]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-9-david@redhat.com
When switching to balloon compaction, we want to drop the cmm_lock and
completely rely on the balloon compaction list lock internally.
loaned_pages is currently protected under the cmm_lock.
Note: Right now cmm_alloc_pages() and cmm_free_pages() can be called
at the same time, e.g., via the thread and a concurrent OOM notifier.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-8-david@redhat.com
The memory isolate notifier was added to allow to offline memory
blocks that contain inflated/"loaned" pages. We can achieve the same
using the balloon compaction framework.
Get rid of the memory isolate notifier. Also, we can get rid of
cmm_mem_going_offline(), as we will never reach that code path now
when we have allocated memory in the balloon (allocated pages are
unmovable and will no longer be special-cased using the memory
isolation notifier).
Leave the memory notifier in place, so we can still back off in case
memory gets offlined.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-7-david@redhat.com
adjust_managed_page_count() performs a totalram_pages_add(), but also
adjusts the managed pages of the zone. Let's use that instead, similar
to virtio-balloon. Use it before freeing a page.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-6-david@redhat.com
We can simply store the pages in a list (page->lru), no need for a
separate data structure (+ complicated handling). This is how most
other balloon drivers store allocated pages without additional
tracking data.
For the notifiers, use page_to_pfn() to check if a page is in the
applicable range. Use page_to_phys() in plpar_page_set_loaned() and
plpar_page_set_active() (I assume due to the __pa() that's the right
thing to do).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-5-david@redhat.com
When unloading the module, one gets
------------[ cut here ]------------
Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
...
We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
Advertise client support for the PAPR architected ibm,drc-info device
tree property during CAS handshake.
Fixes: c7a3275e0f ("powerpc/pseries: Revert support for ibm,drc-info devtree property")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-11-git-send-email-tyreld@linux.ibm.com
The newer ibm,drc-info property is a condensed description of the old
ibm,drc-* properties (ie. names, types, indexes, and power-domains).
When matching a drc-index to a drc-name we need to verify that the
index is within the start and last drc-index range and map it to a
drc-name using the drc-name-prefix and logical index.
Fix the mapping by checking that the index is within the range of the
current drc-info entry, and build the name from the drc-name-prefix
concatenated with the starting drc-name-suffix value and the sequential
index obtained by subtracting ibm,my-drc-index from this entries
drc-start-index.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-10-git-send-email-tyreld@linux.ibm.com
The device tree is in big endian format and any properties directly
retrieved using OF helpers that don't explicitly byte swap should
be annotated. In particular there are several places where we grab
the opaque property value for the old ibm,drc-* properties and the
ibm,my-drc-index property.
Fix this for better static checking by annotating values we know to
explicitly big endian, and byte swap where appropriate.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-9-git-send-email-tyreld@linux.ibm.com
Split physical PCI slot registration scanning into separate routines
that support the old ibm,drc-* properties and one that supports the
new compressed ibm,drc-info property.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-7-git-send-email-tyreld@linux.ibm.com
In the event that the partition is migrated to a platform with older
firmware that doesn't support the ibm,drc-info property the device
tree is modified to remove the ibm,drc-info property and replace it
with the older style ibm,drc-* properties for types, names, indexes,
and power-domains. One of the requirements of the drc-info firmware
feature is that the client is able to handle both the new property,
and old style properties at runtime. Therefore we can't rely on the
firmware feature alone to dictate which property is currently
present in the device tree.
Fix this short coming by checking explicitly for the ibm,drc-info
property, and falling back to the older ibm,drc-* properties if it
doesn't exist.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-6-git-send-email-tyreld@linux.ibm.com
The first entry of the ibm,drc-info property is an int encoded count
of the number of drc-info entries that follow. The "value" pointer
returned by of_prop_next_u32() is still pointing at the this value
when we call of_read_drc_info_cell(), but the helper function
expects that value to be pointing at the first element of an entry.
Fix up by incrementing the "value" pointer to point at the first
element of the first drc-info entry prior.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-5-git-send-email-tyreld@linux.ibm.com
Older firmwares provided information about Dynamic Reconfig
Connectors (DRC) through several device tree properties, namely
ibm,drc-types, ibm,drc-indexes, ibm,drc-names, and
ibm,drc-power-domains. New firmwares have the ability to present this
same information in a much condensed format through a device tree
property called ibm,drc-info.
The existing cpu DLPAR hotplug code only understands the older DRC
property format when validating the drc-index of a cpu during a
hotplug add. This updates those code paths to use the ibm,drc-info
property, when present, instead for validation.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-4-git-send-email-tyreld@linux.ibm.com
There are a couple subtle errors in the mapping between cpu-ids and a
cpus associated drc-index when using the new ibm,drc-info property.
The first is that while drc-info may have been a supported firmware
feature at boot it is possible we have migrated to a CEC with older
firmware that doesn't support the ibm,drc-info property. In that case
the device tree would have been updated after migration to remove the
ibm,drc-info property and replace it with the older style ibm,drc-*
properties for types, indexes, names, and power-domains. PAPR even
goes as far as dictating that if we advertise support for drc-info
that we are capable of supporting either property type at runtime.
The second is that the first value of the ibm,drc-info property is
the int encoded count of drc-info entries. As such "value" returned
by of_prop_next_u32() is pointing at that count, and not the first
element of the first drc-info entry as is expected by the
of_read_drc_info_cell() helper.
Fix the first by ignoring DRC-INFO firmware feature and instead
testing directly for ibm,drc-info, and then falling back to the
old style ibm,drc-indexes in the case it doesn't exit.
Fix the second by incrementing value to the next element prior to
parsing drc-info entries.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-3-git-send-email-tyreld@linux.ibm.com
The ibm,drc-info property is an array property that contains drc-info
entries such that each entry is made up of 2 string encoded elements
followed by 5 int encoded elements. The of_read_drc_info_cell()
helper contains comments that correctly name the expected elements
and their encoding. However, the usage of of_prop_next_string() and
of_prop_next_u32() introduced a subtle skippage of the first u32.
This is a result of of_prop_next_string() returning a pointer to the
next property value which is not a string, but actually a (__be32 *).
As, a result the following call to of_prop_next_u32() passes over the
current int encoded value and actually stores the next one wrongly.
Simply endian swap the current value in place after reading the first
two string values. The remaining int encoded values can then be read
correctly using of_prop_next_u32().
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-2-git-send-email-tyreld@linux.ibm.com
Merge the secureboot support, as well as the IMA changes needed to
support it.
From Nayna's cover letter:
In order to verify the OS kernel on PowerNV systems, secure boot
requires X.509 certificates trusted by the platform. These are
stored in secure variables controlled by OPAL, called OPAL secure
variables. In order to enable users to manage the keys, the secure
variables need to be exposed to userspace.
OPAL provides the runtime services for the kernel to be able to
access the secure variables. This patchset defines the kernel
interface for the OPAL APIs. These APIs are used by the hooks, which
load these variables to the keyring and expose them to the userspace
for reading/writing.
Overall, this patchset adds the following support:
* expose secure variables to the kernel via OPAL Runtime API interface
* expose secure variables to the userspace via kernel sysfs interface
* load kernel verification and revocation keys to .platform and
.blacklist keyring respectively.
The secure variables can be read/written using simple linux
utilities cat/hexdump.
For example:
Path to the secure variables is: /sys/firmware/secvar/vars
Each secure variable is listed as directory.
$ ls -l
total 0
drwxr-xr-x. 2 root root 0 Aug 20 21:20 db
drwxr-xr-x. 2 root root 0 Aug 20 21:20 KEK
drwxr-xr-x. 2 root root 0 Aug 20 21:20 PK
The attributes of each of the secure variables are (for example: PK):
$ ls -l
total 0
-r--r--r--. 1 root root 4096 Oct 1 15:10 data
-r--r--r--. 1 root root 65536 Oct 1 15:10 size
--w-------. 1 root root 4096 Oct 1 15:12 update
The "data" is used to read the existing variable value using
hexdump. The data is stored in ESL format. The "update" is used to
write a new value using cat. The update is to be submitted as AUTH
file.
Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig
can run on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run
on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR.
Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400
systems.
The remaining changes are cleanups from regenerating the defconfig.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
These are recently merged drivers for ASPEED systems.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This driver option is used by the AST2600 A0 boards to work around a
hardware issue.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Stefan Wahren says:
====================
ARM: Enable GENET support for RPi 4
Raspberry Pi 4 uses the broadcom genet chip in version five.
This chip has a dma controller integrated. Up to now the maximal
burst size was hard-coded to 0x10. But it turns out that Raspberry Pi 4
does only work with the smaller maximal burst size of 0x8.
Additionally the patch series has some IRQ retrieval improvements and
adds support for a missing PHY mode.
This series based on Matthias Brugger's V1 series [1].
[1] - https://patchwork.kernel.org/cover/11186193/
Changes in V5:
- address Doug's comment
Changes in V4:
- rebased on current net-next
- remove RGMII_ID support
- remove fixes tag from patch 1
- add Florian's suggestions to patch 5
Changes in V3:
- introduce SoC-specific compatibles for GENET (incl. dt-binding)
- use platform_get_irq_optional for optional IRQ
- remove Fixes tag from IRQ error handling change
- move most of MDIO stuff to bcm2711.dtsi
Changes in V2:
- add 2 fixes for IRQ retrieval
- add support for missing PHY modes
- declare PHY mode RGMII RXID based on the default settings
- add alias to allow firmware append the MAC address
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the missing support for the PHY mode RGMII_RXID.
It's necessary for the Raspberry Pi 4.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The register access in bcmgenet_mii_config() is a little bit opaque and
not easy to extend. In preparation for the missing RGMII PHY modes
move all the phy name assignments into the switch statement and the
register access to the end of the function. This make the code easier
to read and extend.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BCM2711 needs a different maximum DMA burst length. If not set
accordingly a timeout in the transmit queue happens and no package
can be sent. So use the new compatible to derive this value.
Until now the GENET HW version was used as the platform identifier.
This doesn't work with SoC-specific modifications, so introduce a proper
platform data structure.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BCM2711 has some modifications to the GENET v5. So add this SoC
specific compatible.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the error handling for the mandatory IRQs. There is no need
for the error message anymore, this is now handled by platform_get_irq.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As platform_get_irq() now prints an error when the interrupt does not
exist, we are getting a confusing error message in case the optional
WOL IRQ is not defined:
bcmgenet fd58000.ethernet: IRQ index 2 not found
Fix this by using the platform_get_irq_optional().
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
