If a hardware-specific driver does not provide a name, the timer-of core
falls back to device_node.name. Due to generic DT node naming policies,
that name is almost always "timer", and thus doesn't identify the actual
timer used.
Fix this by using device_node.full_name instead, which includes the unit
addrees.
Example impact on /proc/timer_list:
-Clock Event Device: timer
+Clock Event Device: timer@fcfec400
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-3-geert+renesas@glider.be
Commit 469869d18a ("clocksource: Convert to using %pOF instead of
full_name") converted all but the one just added before by commit
32f2fea6e7 ("clocksource/drivers/timer-of: Handle
of_irq_get_byname() result correctly").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-2-geert+renesas@glider.be
Now dquot_enable() has only two internal callers and both of them just
need to update quota flags and don't need most of checks. Just drop
dquot_enable() and fold necessary functionality into the two calling
places.
Signed-off-by: Jan Kara <jack@suse.cz>
Use dquot_load_quota_inode from filesystems instead of dquot_enable().
In all three cases we want to load quota inode and never use the
function to update quota flags.
Signed-off-by: Jan Kara <jack@suse.cz>
Rename vfs_load_quota_inode() to dquot_load_quota_inode() to be
consistent with naming of other functions used for enabling quota
accounting from filesystems. Also export the function and add some
sanity checks to assure filesystems are calling the function properly.
Signed-off-by: Jan Kara <jack@suse.cz>
We already have quota inode loaded when resuming quotas. Use
vfs_load_quota() to avoid some pointless churn with the quota inode.
Signed-off-by: Jan Kara <jack@suse.cz>
Factor out setting up of quota inode and eventual error cleanup from
vfs_load_quota_inode(). This will simplify situation for filesystems
that don't have any quota inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Instances may have flags set as part of its data in which case the code
should not attempt to add it again otherwise it can cause duplication:
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x06
Flags: 0x04
BR/EDR Not Supported
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.
Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.
This commit fixes the bug.
Fixes: 25784ec2d0 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
None of these at803x properties are documented anywhere, so just
remove them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes flush_dcache_page() to only print inequivalent alias error
messages on systems that require coherency. Inequivalent aliases can occur on
systems that don't require coherency and this can cause spurious messages.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPIO handle is referencing the wrong GPIO, so the voltage did not
actually change as intended. The pinmux is already correct, so just
correct the GPIO number.
Fixes: 4a13b3bec3 (arm64: dts: imx: add Zii Ultra board support)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
vreg_lvs1a_1p8 and vreg_lvs2a_1p8 are both feeding pins in the low speed
connectors and should as such alway be on, so enable them.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
SOC revision on older imx8mq is not available in fuses so on anything
other than B1 current code just reports "unknown".
TF-A already handles this by parsing the ROM and exposes the value
through a SMC call. Call this instead of reimplementing the workaround
in the kernel itself.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
drivers/isdn/hardware/mISDN/mISDNisar.c:30:17:
warning: faxmodulation_s defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a tracepoint in nfs_fh_to_dentry() for debugging issues with bad
userspace filehandles.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server returns NFS4ERR_OLD_STATEID, then just skip retrying the
GETATTR when replaying the delegreturn compound. We know nothing will
have changed on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server returns NFS4ERR_OLD_STATEID in response to our delegreturn,
we want to sync to the most recent seqid for the delegation stateid. However
if we are already at the most recent, we have two possibilities:
- an OPEN reply is still outstanding and will return a new seqid
- an earlier OPEN reply was dropped on the floor due to a timeout.
In the latter case, we may end up unable to complete the delegreturn,
so we want to bump the seqid to a value greater than the cached value.
While this may cause us to lose the delegation in the former case,
it should now be safe to assume that the client will replay the OPEN
if necessary in order to get a new valid stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server returns the same delegation in an open that we just used
in a delegreturn, we need to ensure we don't apply that stateid if
the delegreturn has freed it on the server.
To do so, we ensure that we do not free the storage for the delegation
until either it is replaced by a new one, or we throw the inode out of
cache.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In nfs_inode_find_state_and_recover() we want to mark for recovery
only those stateids that match or are older than the supplied
stateid parameter.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix the checks in nfs4_inode_make_writeable() to ignore the case where
we hold no delegations. Currently, in such a case, we automatically
flush writes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that we check that the delegation is valid in
nfs4_return_incompatible_delegation() before we try to return it.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the delegation was revoked, or is already being returned, just
clear the NFS_DELEGATION_RETURN and NFS_DELEGATION_RETURN_IF_CLOSED
flags and keep going.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we revoke a delegation, but the stateid's seqid is newer, then
ensure we update the seqid when marking the delegation as revoked.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server sent us a new delegation stateid that is more recent than
the one that got revoked, then clear the NFS_DELEGATION_REVOKED flag.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a check to ensure that we haven't already removed the delegation
from the inode after we take all the relevant locks.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Rename nfs_inode_return_delegation_noreclaim() to
nfs_inode_evict_delegation(), which better describes what it
does.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we're processsing a delegation recall, ignore the delegations that
have already been revoked or returned.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the delegation is marked as being revoked, then don't use it in
the open state structure.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv2, v3 and NFSv4 servers often have duplicate replay caches that look
at the source port when deciding whether or not an RPC call is a replay
of a previous call. This requires clients to perform strange TCP gymnastics
in order to ensure that when they reconnect to the server, they bind
to the same source port.
NFSv4.1 and NFSv4.2 have sessions that provide proper replay semantics,
that do not look at the source port of the connection. This patch therefore
ensures they can ignore the rebind requirement.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a NFSv3 server is being used as both a DS and as a regular NFSv3 server,
we may want to keep the IO traffic on a separate TCP connection, since
it will typically have very different timeout characteristics.
This patch therefore sets up a flag to separate the two modes of operation
for the nfs_client.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Connecting to the DS is a non-interactive, asynchronous task, so there is
no reason to fire up an extra RPC null ping in order to ensure that the
server is up.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a flag to tell the nfs_client it should set RPC_CLNT_CREATE_NOPING when
creating the rpc client.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Simplify the struct iattr timestamp encoding by skipping the step of
an intermediate struct timespec.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Simplify the struct iattr timestamp encoding by skipping the step of
an intermediate struct timespec.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Encode the mtime correctly.
Fixes: 95582b0083 ("vfs: change inode times to use struct timespec64")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Convert the NFSv4 callbacks to use struct timestamp64, rather than
truncating times to 32-bit values.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4 supports 64-bit timestamps, so there is no point in converting
the struct iattr timestamps to 32-bits before encoding.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NFSv4 supports 64-bit times, so we should switch to using struct
timespec64 when decoding attributes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we set nfs_mountpoint_expiry_timeout to a negative value, then
allow that to imply that we do not expire NFSv4 submounts.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
