In newer versions of virtio-scsi we just reset the timer when an a
command times out, so TMFs are never sent for the cmd time out case.
However, in older kernels and for the TMF inject cases, we can still get
resets and we end up just failing immediately so the guest might see the
device get offlined and IO errors.
For the older kernel cases, we want the same end result as the
modern virtio-scsi driver where we let the lower levels fire their error
handling and handle the problem. And at the upper levels we want to
wait. This patch ties the LUN reset handling into the LIO TMF code which
will just wait for outstanding commands to complete like we are doing in
the modern virtio-scsi case.
Note: I did not handle the ABORT case to keep this simple. For ABORTs
LIO just waits on the cmd like how it does for the RESET case. If
an ABORT fails, the guest OS ends up escalating to LUN RESET, so in
the end we get the same behavior where we wait on the outstanding
cmds.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/1604986403-4931-6-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Move code to parse lun from req's lun_buf to helper, so tmf code
can use it in the next patch.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1604986403-4931-5-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
We might not do the final se_cmd put from vhost_scsi_complete_cmd_work.
When the last put happens a little later then we could race where
vhost_scsi_complete_cmd_work does vhost_signal, the guest runs and sends
more IO, and vhost_scsi_handle_vq runs but does not find any free cmds.
This patch has us delay completing the cmd until the last lio core ref
is dropped. We then know that once we signal to the guest that the cmd
is completed that if it queues a new command it will find a free cmd.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/1604986403-4931-4-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
We currently are limited to 256 cmds per session. This leads to problems
where if the user has increased virtqueue_size to more than 2 or
cmd_per_lun to more than 256 vhost_scsi_get_tag can fail and the guest
will get IO errors.
This patch moves the cmd allocation to per vq so we can easily match
whatever the user has specified for num_queues and
virtqueue_size/cmd_per_lun. It also makes it easier to control how much
memory we preallocate. For cases, where perf is not as important and
we can use the current defaults (1 vq and 128 cmds per vq) memory use
from preallocate cmds is cut in half. For cases, where we are willing
to use more memory for higher perf, cmd mem use will now increase as
the num queues and queue depth increases.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/1604986403-4931-3-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a helper check if a vq has been setup. The next patches
will use this when we move the vhost scsi cmd preallocation from per
session to per vq. In the per vq case, we only want to allocate cmds
for vqs that have actually been setup and not for all the possible
vqs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/1604986403-4931-2-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
ERROR: modpost: "mac_pton" [drivers/vdpa/vdpa_sim/vdpa_sim.ko] undefined!
mac_pton() is defined in lib/net_utils.c and is not built if NET is not set.
Select GENERIC_NET_UTILS as vdpasim doesn't depend on NET.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201113155706.599434-1-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
PREEMPT_RT does not spin and wait until a running timer completes its
callback but instead it blocks on a sleeping lock to prevent a livelock in
the case that the task waiting for the callback completion preempted the
callback.
This cannot be done for timers flagged with TIMER_IRQSAFE. These timers can
be canceled from an interrupt disabled context even on RT kernels.
The expiry callback of such timers is invoked with interrupts disabled so
there is no need to use the expiry lock mechanism because obviously the
callback cannot be preempted even on RT kernels.
Do not use the timer_base::expiry_lock mechanism when waiting for a running
callback to complete if the timer is flagged with TIMER_IRQSAFE.
Also add a lockdep assertion for RT kernels to validate that the expiry
lock mechanism is always invoked in preemptible context.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201103190937.hga67rqhvknki3tp@linutronix.de
Use the "%ps" printk format string to resolve symbol names.
This works on all platforms, including ia64, ppc64 and parisc64 on which
one needs to dereference pointers to function descriptors instead of
function pointers.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201104163401.GA3984@ls3530.fritz.box
GTT roll support was used to accelerate fb panning on some machines.
Unfortunately this never worked properly with multiple monitors and
caused issues on others where the framebuffer wouldn't fit in stolen
memory. Let's remove it!
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028143608.1284-1-patrik.r.jakobsson@gmail.com
Here are some small char/misc/whatever driver fixes for 5.10-rc4.
Nothing huge, lots of small fixes for reported issues:
- habanalabs driver fixes
- speakup driver fixes
- uio driver fixes
- virtio driver fix
- other tiny driver fixes
Full details are in the shortlog.
All of these have been in linux-next for a full week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX7E69w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykCzgCgmxhxo/A/fnBiZxVgIQjL9KK791wAnjjcypF4
yLivbpFLSMLTUb46sxSL
=bFxo
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/whatever driver fixes for 5.10-rc4.
Nothing huge, lots of small fixes for reported issues:
- habanalabs driver fixes
- speakup driver fixes
- uio driver fixes
- virtio driver fix
- other tiny driver fixes
Full details are in the shortlog.
All of these have been in linux-next for a full week with no reported
issues"
* tag 'char-misc-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
uio: Fix use-after-free in uio_unregister_device()
firmware: xilinx: fix out-of-bounds access
nitro_enclaves: Fixup type and simplify logic of the poll mask setup
speakup ttyio: Do not schedule() in ttyio_in_nowait
speakup: Fix clearing selection in safe context
speakup: Fix var_id_t values and thus keymap
virtio: virtio_console: fix DMA memory allocation for rproc serial
habanalabs/gaudi: mask WDT error in QMAN
habanalabs/gaudi: move coresight mmu config
habanalabs: fix kernel pointer type
mei: protect mei_cl_mtu from null dereference
Here are some small Thunderbolt and USB driver fixes for 5.10-rc4 to
solve some reported issues.
Nothing huge in here, just small things:
- thunderbolt memory leaks fixed and new device ids added
- revert of problem patch for the musb driver
- new quirks added for USB devices
- typec power supply fixes to resolve much reported problems
about charging notifications not working anymore
All except the cdc-acm driver quirk addition have been in linux-next
with no reported issues (the quirk patch was applied on Friday, and is
self-contained.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX7E6EA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymHNwCePOBlfVmcH3eEqVTByPdAG+L5m7MAnRLRqmMw
aPpNB/a0CRSPxH+5Z+nV
=Vi/z
-----END PGP SIGNATURE-----
Merge tag 'usb-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for 5.10-rc4 to
solve some reported issues.
Nothing huge in here, just small things:
- thunderbolt memory leaks fixed and new device ids added
- revert of problem patch for the musb driver
- new quirks added for USB devices
- typec power supply fixes to resolve much reported problems about
charging notifications not working anymore
All except the cdc-acm driver quirk addition have been in linux-next
with no reported issues (the quirk patch was applied on Friday, and is
self-contained)"
* tag 'usb-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode
MAINTAINERS: add usb raw gadget entry
usb: typec: ucsi: Report power supply changes
xhci: hisilicon: fix refercence leak in xhci_histb_probe
Revert "usb: musb: convert to devm_platform_ioremap_resource_byname"
thunderbolt: Add support for Intel Tiger Lake-H
thunderbolt: Only configure USB4 wake for lane 0 adapters
thunderbolt: Add uaccess dependency to debugfs interface
thunderbolt: Fix memory leak if ida_simple_get() fails in enumerate_services()
thunderbolt: Add the missed ida_simple_remove() in ring_request_msix()
without two-dimensional paging (EPT/NPT).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+xQ54UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMzeQf+JP9NpXgeB7dhiODhmO5SyLdw0u9j
kVOM6+kHcEvG6o0yU1uUZr2ZPh9vIAwIjXi8Luiodcazdp6jvxvJ32CeMYJz2lel
y+3Gjp3WS2+FExOjBephBztaMHLihlWQt3E0EKuCc7StyfMhaZooiTRMpvrmiLWe
HQ/epM9oLMyrCqG9MKkvTwH0lDyB5CprV1BNt6YyKjt7d5swEqC75A6lOXnmdAah
utgx1agSIVQPv6vDF9HLaQaoelHT7ucudx+zIkvOAmoQ56AJMPfCr0+Af3ZVW+f/
I5tXVfBhoOV3BVSIsJS7Px0HcZt7siVtl6ISZZos8ox85S4ysjWm2vXFcQ==
=MiOr
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and x86, the latter especially for old processors
without two-dimensional paging (EPT/NPT)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use
KVM: SVM: Update cr3_lm_rsvd_bits for AMD SEV guests
KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch
KVM: x86: clflushopt should be treated as a no-op by emulation
KVM: arm64: Handle SCXTNUM_ELx traps
KVM: arm64: Unify trap handlers injecting an UNDEF
KVM: arm64: Allow setting of ID_AA64PFR0_EL1.CSV2 from userspace
- Cure the fallout from the MSI irqdomain overhaul which missed that the
Intel IOMMU does not register virtual function devices and therefore
never reaches the point where the MSI interrupt domain is assigned. This
makes the VF devices use the non-remapped MSI domain which is trapped by
the IOMMU/remap unit.
- Remove an extra space in the SGI_UV architecture type procfs output for
UV5.
- Remove a unused function which was missed when removing the UV BAU TLB
shootdown handler.
-----BEGIN PGP SIGNATURE-----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=X/P+
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Cure the fallout from the MSI irqdomain overhaul which missed that
the Intel IOMMU does not register virtual function devices and
therefore never reaches the point where the MSI interrupt domain is
assigned. This made the VF devices use the non-remapped MSI domain
which is trapped by the IOMMU/remap unit
- Remove an extra space in the SGI_UV architecture type procfs output
for UV5
- Remove a unused function which was missed when removing the UV BAU
TLB shootdown handler"
* tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iommu/vt-d: Cure VF irqdomain hickup
x86/platform/uv: Fix copied UV5 output archtype
x86/platform/uv: Drop last traces of uv_flush_tlb_others
- A set of commits which reduce the stack usage of various perf event
handling functions which allocated large data structs on stack causing
stack overflows in the worst case.
- Use the proper mechanism for detecting soft interrupts in the recursion
protection.
- Make the resursion protection simpler and more robust.
- Simplify the scheduling of event groups to make the code more robust and
prepare for fixing the issues vs. scheduling of exclusive event groups.
- Prevent event multiplexing and rotation for exclusive event groups
- Correct the perf event attribute exclusive semantics to take pinned
events, e.g. the PMU watchdog, into account
- Make the anythread filtering conditional for Intel's generic PMU
counters as it is not longer guaranteed to be supported on newer
CPUs. Check the corresponding CPUID leaf to make sure.
- Fixup a duplicate initialization in an array which was probably cause by
the usual copy & paste - forgot to edit mishap.
-----BEGIN PGP SIGNATURE-----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=FzCf
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes for perf:
- A set of commits which reduce the stack usage of various perf
event handling functions which allocated large data structs on
stack causing stack overflows in the worst case
- Use the proper mechanism for detecting soft interrupts in the
recursion protection
- Make the resursion protection simpler and more robust
- Simplify the scheduling of event groups to make the code more
robust and prepare for fixing the issues vs. scheduling of
exclusive event groups
- Prevent event multiplexing and rotation for exclusive event groups
- Correct the perf event attribute exclusive semantics to take
pinned events, e.g. the PMU watchdog, into account
- Make the anythread filtering conditional for Intel's generic PMU
counters as it is not longer guaranteed to be supported on newer
CPUs. Check the corresponding CPUID leaf to make sure
- Fixup a duplicate initialization in an array which was probably
caused by the usual 'copy & paste - forgot to edit' mishap"
* tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix Add BW copypasta
perf/x86/intel: Make anythread filter support conditional
perf: Tweak perf_event_attr::exclusive semantics
perf: Fix event multiplexing for exclusive groups
perf: Simplify group_sched_in()
perf: Simplify group_sched_out()
perf/x86: Make dummy_iregs static
perf/arch: Remove perf_sample_data::regs_user_copy
perf: Optimize get_recursion_context()
perf: Fix get_recursion_context()
perf/x86: Reduce stack usage for x86_pmu::drain_pebs()
perf: Reduce stack usage of perf_output_begin()
- Address a load balancer regression by making the load balancer use the
same logic as the wakeup path to spread tasks in the LLC domain.
- Prefer the CPU on which a task run last over the local CPU in the fast
wakeup path for asymmetric CPU capacity systems to align with the
symmetric case. This ensures more locality and prevents massive
migration overhead on those asymetric systems
- Fix a memory corruption bug in the scheduler debug code caused by
handing a modified buffer pointer to kfree().
-----BEGIN PGP SIGNATURE-----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=wFcU
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler fixes:
- Address a load balancer regression by making the load balancer use
the same logic as the wakeup path to spread tasks in the LLC domain
- Prefer the CPU on which a task run last over the local CPU in the
fast wakeup path for asymmetric CPU capacity systems to align with
the symmetric case. This ensures more locality and prevents massive
migration overhead on those asymetric systems
- Fix a memory corruption bug in the scheduler debug code caused by
handing a modified buffer pointer to kfree()"
* tag 'sched-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix memory corruption caused by multiple small reads of flags
sched/fair: Prefer prev cpu in asymmetric wakeup path
sched/fair: Ensure tasks spreading in LLC during LB
There might be some requests pending in the buffer when the interface close
sequence occurs. In some devices, these pending requests might lead to the
module not shutting down properly when m_can_clk_stop() is called.
Therefore, move the device to init state before potentially powering it down.
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200825055442.16994-1-faiz_abbas@ti.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fix leaking netdev device from peripherial devices. The call to allocate the
netdev device is made from and managed by the peripherial.
Fixes: f524f829b7 ("can: m_can: Create a m_can platform framework")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20200227183829.21854-2-dmurphy@ti.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch creates a common function that peripherials can call to free the
netdev device when failures occur.
Fixes: f524f829b7 ("can: m_can: Create a m_can platform framework")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20200227183829.21854-2-dmurphy@ti.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Prevent an unconditional interrupt enable in a futex helper function
which can be called from contexts which expect interrupts to stay
disabled across the call.
- Don't modify lockdep chain keys in the validation process as that
causes chain inconsistency.
-----BEGIN PGP SIGNATURE-----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=XuF7
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two fixes for the locking subsystem:
- Prevent an unconditional interrupt enable in a futex helper
function which can be called from contexts which expect interrupts
to stay disabled across the call
- Don't modify lockdep chain keys in the validation process as that
causes chain inconsistency"
* tag 'locking-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Avoid to modify chain keys in validate_chain()
futex: Don't enable IRQs unconditionally in put_pi_state()
m_can_handle_state_change() is called with the new_state as an argument.
In the switch statements for CAN_STATE_ERROR_ACTIVE, the comment and the
following code indicate that a CAN_STATE_ERROR_WARNING is handled.
This patch fixes this problem by changing the case to CAN_STATE_ERROR_WARNING.
Signed-off-by: Wu Bo <wubo.oduw@gmail.com>
Link: http://lore.kernel.org/r/20200129022330.21248-2-wubo.oduw@gmail.com
Cc: Dan Murphy <dmurphy@ti.com>
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Change the order in tcan4x5x_can_remove() to be the exact inverse of
tcan4x5x_can_probe(). First m_can_class_unregister(), then power down the
device.
Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20201019154233.1262589-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds the missing error checking when initializing the regmap
interface fails.
Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20201019154233.1262589-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
regmap is a library function that gets selected by drivers that need it. No
driver modules should depend on it. Instead depends on SPI and select
REGMAP_SPI. Depending on REGMAP_SPI makes this driver only build if another
driver already selected REGMAP_SPI, as the symbol can't be selected through the
menu kernel configuration.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: http://lore.kernel.org/r/20200413141013.506613-1-enric.balletbo@collabora.com
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
pm_runtime_get_sync() will increment pm usage at first and it will resume the
device later. If runtime of the device has error or device is in inaccessible
state(or other error state), resume operation will fail. If we do not call put
operation to decrease the reference, it will result in reference leak in the
two functions flexcan_get_berr_counter() and flexcan_open().
Moreover, this device cannot enter the idle state and always stay busy or other
non-idle state later. So we should fix it through adding
pm_runtime_put_noidle().
Fixes: ca10989632 ("can: flexcan: implement can Runtime PM")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201108083000.2599705-1-zhangqilong3@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the patch
d9b081e3fc ("can: flexcan: remove ack_grp and ack_bit handling from driver")
the unused ack_grp and ack_bit were removed from the driver. However in the
comment, the "req_bit" was accidentally removed, too.
This patch adds back the "req_bit" bit.
Fixes: d9b081e3fc ("can: flexcan: remove ack_grp and ack_bit handling from driver")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: http://lore.kernel.org/r/20201014114810.2911135-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then assigned to a signed 64 bit variable. In the case where
time_ref->adapter->ts_used_bits is 32 or more this can lead to an oveflow.
Avoid this by shifting using the BIT_ULL macro instead.
Fixes: bb4785551f ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201105112427.40688-1-colin.king@canonical.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver has to first fill the skb with data and then handle it to
can_put_echo_skb(). This patch moves the can_put_echo_skb() down, right before
sending the skb out via USB.
Fixes: 51f3baad7d ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>
Link: https://lore.kernel.org/r/20201111221204.1639007-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the error handling, we should goto the probe_exit_candev
to free ndev to prevent memory leak.
Fixes: dabf54dd1c ("can: ti_hecc: Convert TI HECC driver to DT only driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201114111708.3465543-1-zhangqilong3@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
netif_rx() is meant to be called from interrupt contexts. can_restart() may be
called by can_restart_work(), which is called from a worqueue, so it may run in
process context. Use netif_rx_ni() instead.
Fixes: 39549eef35 ("can: CAN Network device driver and Netlink interface")
Co-developed-by: Loris Fauster <loris.fauster@ttcontrol.com>
Signed-off-by: Loris Fauster <loris.fauster@ttcontrol.com>
Signed-off-by: Alejandro Concepcion Rodriguez <alejandro@acoro.eu>
Link: https://lore.kernel.org/r/4e84162b-fb31-3a73-fa9a-9438b4bd5234@acoro.eu
[mkl: use netif_rx_ni() instead of netif_rx_any_context()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: d468984688 ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: 8cb68751c1 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull percpu fix and cleanup from Dennis Zhou:
"A fix for a Wshadow warning in the asm-generic percpu macros came in
and then I tacked on the removal of flexible array initializers in the
percpu allocator"
* 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: convert flexible array initializers to use struct_size()
asm-generic: percpu: avoid Wshadow warning
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-10-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new vm_create variants that also takes a number of vcpus,
an amount of per-vcpu pages, and optionally a list of vcpuids. These
variants will create default VMs with enough additional pages to
cover the vcpu stacks, per-vcpu pages, and pagetable pages for all.
The new 'default' variant uses VM_MODE_DEFAULT, whereas the other
new variant accepts the mode as a parameter.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-6-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code is almost 100% the same anyway. Just move it to common
and add a few arch-specific macros.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing sets USE_CLEAR_DIRTY_LOG anymore, so anything it surrounds
is dead code.
However, it is the recommended way to use the dirty page bitmap
for new enough kernel, so use it whenever KVM has the
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 capability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On emulated VM-entry and VM-exit, update the CPUID bits that reflect
CR4.OSXSAVE and CR4.PKE.
This fixes a bug where the CPUID bits could continue to reflect L2 CR4
values after emulated VM-exit to L1. It also fixes a related bug where
the CPUID bits could continue to reflect L1 CR4 values after emulated
VM-entry to L2. The latter bug is mainly relevant to SVM, wherein
CPUID is not a required intercept. However, it could also be relevant
to VMX, because the code to conditionally update these CPUID bits
assumes that the guest CPUID and the guest CR4 are always in sync.
Fixes: 8eb3f87d90 ("KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exit")
Fixes: 2acf923e38 ("KVM: VMX: Enable XSAVE/XRSTOR for guest")
Fixes: b9baba8614 ("KVM, pkeys: expose CPUID/CR4 to guest")
Reported-by: Abhiroop Dabral <adabral@paloaltonetworks.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Haozhong Zhang <haozhong.zhang@intel.com>
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Huaitong Han <huaitong.han@intel.com>
Message-Id: <20201029170648.483210-1-jmattson@google.com>
It's only used to override the existing dirty ring size/count. If
with a bigger ring count, we test async of dirty ring. If with a
smaller ring count, we test ring full code path. Async is default.
It has no use for non-dirty-ring tests.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012241.6208-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously the dirty ring test was working in synchronous way, because
only with a vmexit (with that it was the ring full event) we'll know
the hardware dirty bits will be flushed to the dirty ring.
With this patch we first introduce a vcpu kick mechanism using SIGUSR1,
which guarantees a vmexit and also therefore the flushing of hardware
dirty bits. Once this is in place, we can keep the vcpu dirty work
asynchronous of the whole collection procedure now. Still, we need
to be very careful that when reaching the ring buffer soft limit
(KVM_EXIT_DIRTY_RING_FULL) we must collect the dirty bits before
continuing the vcpu.
Further increase the dirty ring size to current maximum to make sure
we torture more on the no-ring-full case, which should be the major
scenario when the hypervisors like QEMU would like to use this feature.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012239.6159-1-peterx@redhat.com>
[Use KVM_SET_SIGNAL_MASK+sigwait instead of a signal handler. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the initial dirty ring buffer test.
The current test implements the userspace dirty ring collection, by
only reaping the dirty ring when the ring is full.
So it's still running synchronously like this:
vcpu main thread
1. vcpu dirties pages
2. vcpu gets dirty ring full
(userspace exit)
3. main thread waits until full
(so hardware buffers flushed)
4. main thread collects
5. main thread continues vcpu
6. vcpu continues, goes back to 1
We can't directly collects dirty bits during vcpu execution because
otherwise we can't guarantee the hardware dirty bits were flushed when
we collect and we're very strict on the dirty bits so otherwise we can
fail the future verify procedure. A follow up patch will make this
test to support async just like the existing dirty log test, by adding
a vcpu kick mechanism.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012237.6111-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a hook for the checks after vcpu_run() completes. Preparation
for the dirty ring test because we'll need to take care of another
exit reason.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012235.6063-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because kvm dirty rings and kvm dirty log is used in an exclusive way,
Let's avoid creating the dirty_bitmap when kvm dirty ring is enabled.
At the meantime, since the dirty_bitmap will be conditionally created
now, we can't use it as a sign of "whether this memory slot enabled
dirty tracking". Change users like that to check against the kvm
memory slot flags.
Note that there still can be chances where the kvm memory slot got its
dirty_bitmap allocated, _if_ the memory slots are created before
enabling of the dirty rings and at the same time with the dirty
tracking capability enabled, they'll still with the dirty_bitmap.
However it should not hurt much (e.g., the bitmaps will always be
freed if they are there), and the real users normally won't trigger
this because dirty bit tracking flag should in most cases only be
applied to kvm slots only before migration starts, that should be far
latter than kvm initializes (VM starts).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012226.5868-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no good reason to use both the dirty bitmap logging and the
new dirty ring buffer to track dirty bits. We should be able to even
support both of them at the same time, but it could complicate things
which could actually help little. Let's simply make it the rule
before we enable dirty ring on any arch, that we don't allow these two
interfaces to be used together.
The big world switch would be KVM_CAP_DIRTY_LOG_RING capability
enablement. That's where we'll switch from the default dirty logging
way to the dirty ring way. As long as kvm->dirty_ring_size is setup
correctly, we'll once and for all switch to the dirty ring buffer mode
for the current virtual machine.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012224.5818-1-peterx@redhat.com>
[Change errno from EINVAL to ENXIO. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is heavily based on previous work from Lei Cao
<lei.cao@stratus.com> and Paolo Bonzini <pbonzini@redhat.com>. [1]
KVM currently uses large bitmaps to track dirty memory. These bitmaps
are copied to userspace when userspace queries KVM for its dirty page
information. The use of bitmaps is mostly sufficient for live
migration, as large parts of memory are be dirtied from one log-dirty
pass to another. However, in a checkpointing system, the number of
dirty pages is small and in fact it is often bounded---the VM is
paused when it has dirtied a pre-defined number of pages. Traversing a
large, sparsely populated bitmap to find set bits is time-consuming,
as is copying the bitmap to user-space.
A similar issue will be there for live migration when the guest memory
is huge while the page dirty procedure is trivial. In that case for
each dirty sync we need to pull the whole dirty bitmap to userspace
and analyse every bit even if it's mostly zeros.
The preferred data structure for above scenarios is a dense list of
guest frame numbers (GFN). This patch series stores the dirty list in
kernel memory that can be memory mapped into userspace to allow speedy
harvesting.
This patch enables dirty ring for X86 only. However it should be
easily extended to other archs as well.
[1] https://patchwork.kernel.org/patch/10471409/
Signed-off-by: Lei Cao <lei.cao@stratus.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012222.5767-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The context will be needed to implement the kvm dirty ring.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012044.5151-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
