This patch removes the iph field from the state structure, which is not
properly initialized. Instead, add a new field to make the "do we want
to set DF" be the state bit and move the code to set the DF flag from
ip_frag_next().
Joint work with Pablo and Linus.
Fixes: 19c3401a91 ("net: ipv4: place control buffer handling away from fragmentation iterators")
Reported-by: Patrick Schönthaler <patrick@notvads.ovh>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
net: phy: marvell: support downshift as PHY tunable
So far downshift is implemented for one small use case only and can't
be controlled from userspace. So let's implement this feature properly
as a PHY tunable so that it can be controlled via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of superseded function marvell_set_downshift() we can use new
function m88e1111_set_downshift() in m88e1116r_config_init().
For this m88e1116r_config_init() has to be moved in the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far downshift is implemented for one small use case only and can't
be controlled from userspace. So let's implement this feature properly
as a PHY tunable so that it can be controlled via ethtool.
More Marvell PHY's may support downshift, but I restricted it for now
to the ones where I have the datasheet.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
r0-r3 & r12 registers are saved & restored, before & after svc
respectively. Intention was to preserve those registers across thread to
handler mode switch.
On v7-M, hardware saves the register context upon exception in AAPCS
complaint way. Restoring r0-r3 & r12 is done from stack location where
hardware saves it, not from the location on stack where these registers
were saved.
To clarify, on stm32f429 discovery board:
1. before svc, sp - 0x90009ff8
2. r0-r3,r12 saved to 0x90009ff8 - 0x9000a00b
3. upon svc, h/w decrements sp by 32 & pushes registers onto stack
4. after svc, sp - 0x90009fd8
5. r0-r3,r12 restored from 0x90009fd8 - 0x90009feb
Above means r0-r3,r12 is not restored from the location where they are
saved, but since hardware pushes the registers onto stack, the registers
are restored correctly.
Note that during register saving to stack (step 2), it goes past
0x9000a000. And it seems, based on objdump, there are global symbols
residing there, and it perhaps can cause issues on a non-XIP Kernel
(on XIP, data section is setup later).
Based on the analysis above, manually saving registers onto stack is at
best no-op and at worst can cause data section corruption. Hence remove
storing of registers onto stack before svc.
Fixes: b70cd406d7 ("ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode")
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Added test cases for IP header operations:
- set tos/precedence
- add value to tos/precedence
- clear tos/precedence
- invert tos/precedence
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The omap44xx_sha0_hwmod and omap44xx_l3_main_2__des objects are
not exported so make them static to avoid the following warnings:
arch/arm/mach-omap2/omap_hwmod_44xx_data.c:793:19: warning: symbol 'omap44xx_sha0_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_44xx_data.c:977:26: warning: symbol 'omap44xx_l3_main_2__des' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The prm_{save,restore}_context functions are not exported
so make them static to avoid the following warnings:
arch/arm/mach-omap2/prm44xx.c:748:6: warning: symbol 'prm_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/prm44xx.c:759:6: warning: symbol 'prm_restore_context' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lorenzo Bianconi says:
====================
add XDP support to mvneta driver
Add XDP support to mvneta driver for devices that rely on software
buffer management. Supported verdicts are:
- XDP_DROP
- XDP_PASS
- XDP_REDIRECT
- XDP_TX
Moreover set ndo_xdp_xmit net_device_ops function pointer in order
to support redirecting from other device (e.g. virtio-net).
Convert mvneta driver to page_pool API.
This series is based on previous work done by Jesper and Ilias.
We will send follow-up patches to reduce DMA-sync operations.
Changes since v4:
- reset page_pool pointer to NULL in mvneta_rxq_drop_pkts and in
mvneta_create_page_pool error path
- move dma sync in mvneta_rx_refill() in patch 2/7
- verify bpf prog pointer in mvneta_xdp_setup to double-check if
stop/start is really necessary
- coding style fixes
Changes since v3:
- rename MVNETA_XDP_CONSUMED in MVNETA_XDP_DROPPED
- squash patch 4/8 and patch 3/8
- fix dma sync for XDP_TX verdict
- fix queue_index in xdp_rxq_info_reg
- cosmetics
Changes since v2:
- rely on page_pool_recycle_direct instead of xdp_return_buff for XDP_DROP
- define xdp buffer in mvneta_rx_swbm and avoid default initializations
- use dma_sync_single_for_cpu instead of dma_sync_single_range_for_cpu
- run page_pool_release_page in mvneta_swbm_add_rx_fragment even if
the buffer contains just ETH_FCS
Changes since v1:
- sync dma buffers before refilling hw queues
- fix stats accounting
Changes since RFC:
- implement XDP_TX
- make tx pending buffer list agnostic
- code refactoring
- check if device is running in mvneta_xdp_setup
====================
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function
pointer
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow tx buffer array to contain both skb and xdp buffers in order to
enable xdp frame recycling adding XDP_TX verdict support
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move data buffer prefetch in mvneta_swbm_rx_frame after
dma_sync_single_range_for_cpu
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and
mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to
allocate skb since the previous patch introduced buffer recycling using
the page_pool API.
This patch fixes even an issue in the original driver where dma buffers
are accessed before dma sync.
mvneta driver can run on not cache coherent devices so it is
necessary to sync DMA buffers before sending them to the device
in order to avoid memory corruptions. Running perf analysis we can
see a performance cost associated with this DMA-sync (anyway it is
already there in the original driver code). In follow up patches we
will add more logic to reduce DMA-sync as much as possible.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the page_pool api for allocations and DMA handling instead of
__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page().
Pages are unmapped using page_pool_release_page before packets
go into the network stack.
The page_pool API offers buffer recycling capabilities for XDP but
allocates one page per packet, unless the driver splits and manages
the allocated page.
This is a preliminary patch to add XDP support to mvneta driver
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce mvneta_update_stats routine to collect {rx/tx} statistics
(packets and bytes). This is a preliminary patch to add XDP support to
mvneta driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dra7xx_sha0_hwmod object is not exported outside of
omap_hwmod_7xx_data. so make it static to avoid the
following warning:
arch/arm/mach-omap2/omap_hwmod_7xx_data.c:686:19: warning: symbol 'dra7xx_sha0_hwmod' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Do not export am43xx_control_{save,restore}_context to avoid
the foloowing warnings:
arch/arm/mach-omap2/control.c:687:6: warning: symbol 'am43xx_control_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/control.c:701:6: warning: symbol 'am43xx_control_restore_context' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
VLAN filter table array not implemented yet and shadow_vfta pointer
not used. Clean up the code and remove the unused shadow_vfta pointer.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Extend the socket buffer field process and add Rx checksum functionality
Minor: fix indentation with tab instead of spaces.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add multicast addresses list to the MTA table.
Implement basic Rx mode support.
Add option for IPv6 address settings.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Implement flow for S0ix support. Modern SoCs support S0ix low power
states during idle periods, which are sub-states of ACPI S0 that increase
power saving while supporting an instant-on experience for providing
lower latency that ACPI S0. The S0ix states shut off parts of the SoC
when they are not in use, while still maintaning optimal performance.
This patch add support for S0ix started from an Ice Lake platform.
Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
With the removal of the panel-dpi from the omap drivers, the
LCD no longer works. This patch points the device tree to
a newly created panel named "logicpd,type28"
Fixes: 8bf4b16211 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Thw open_tree and move_mount syscalls take names from the
user, so add the __user to these to ensure the following
warnings from sparse are fixed:
fs/namespace.c:2392:35: warning: incorrect type in argument 2 (different address spaces)
fs/namespace.c:2392:35: expected char const [noderef] <asn:1> *name
fs/namespace.c:2392:35: got char const *filename
fs/namespace.c:3541:38: warning: incorrect type in argument 2 (different address spaces)
fs/namespace.c:3541:38: expected char const [noderef] <asn:1> *name
fs/namespace.c:3541:38: got char const *from_pathname
fs/namespace.c:3550:36: warning: incorrect type in argument 2 (different address spaces)
fs/namespace.c:3550:36: expected char const [noderef] <asn:1> *name
fs/namespace.c:3550:36: got char const *to_pathname
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The dss driver wants two regulators or it dump some splat while
initializing. This patch adds a reference to the second regulator
which to avoid the warnings that the regulator is missing.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The fcntl_rw_hint() has a missing __user annotation in
the code when assinging argp. Add this to fix the
following sparse warnings:
fs/fcntl.c:280:22: warning: incorrect type in initializer (different address spaces)
fs/fcntl.c:280:22: expected unsigned long long [usertype] *argp
fs/fcntl.c:280:22: got unsigned long long [noderef] [usertype] <asn:1> *
fs/fcntl.c:287:34: warning: incorrect type in argument 1 (different address spaces)
fs/fcntl.c:287:34: expected void [noderef] <asn:1> *to
fs/fcntl.c:287:34: got unsigned long long [usertype] *argp
fs/fcntl.c:291:40: warning: incorrect type in argument 2 (different address spaces)
fs/fcntl.c:291:40: expected void const [noderef] <asn:1> *from
fs/fcntl.c:291:40: got unsigned long long [usertype] *argp
fs/fcntl.c:303:34: warning: incorrect type in argument 1 (different address spaces)
fs/fcntl.c:303:34: expected void [noderef] <asn:1> *to
fs/fcntl.c:303:34: got unsigned long long [usertype] *argp
fs/fcntl.c:307:40: warning: incorrect type in argument 2 (different address spaces)
fs/fcntl.c:307:40: expected void const [noderef] <asn:1> *from
fs/fcntl.c:307:40: got unsigned long long [usertype] *argp
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use hostprogs kbuild constructs to compile
mei sample program mei-amt-version
Add CONFIG_SAMPLE_INTEL_MEI option to enable/disable
the feature.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191010132710.4075-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vm_insert_page() does increment the page refcount, and just to be sure,
I've confirmed it by printing page_count(page[0].page_ptr) before and after
vm_insert_page(). It's 1 before, 2 afterwards, as expected.
Fixes: a145dd411e ("VM: add "vm_insert_page()" function")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191018153946.128584-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huazhong Tan says:
====================
net: hns3: add some cleanups & optimizations
This patchset includes some cleanups and optimizations for the HNS3
ethernet driver.
[patch 1/8] removes unused and unnecessary structures.
[patch 2/8] uses a ETH_ALEN u8 array to replace two mac_addr_*
field in struct hclge_mac_mgr_tbl_entry_cmd.
[patch 3/8] optimizes the barrier used in the IO path.
[patch 4/8] introduces macro ring_to_netdev() to get netdevive
from struct hns3_enet_ring variable.
[patch 5/8] makes struct hns3_enet_ring to be cacheline aligned
[patch 6/8] adds a minor cleanup for hns3_handle_rx_bd().
[patch 7/8] removes linear data allocating for fraglist SKB.
[patch 8/8] clears hardware error when resetting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When device is resetting, the CMDQ service may be stopped until
reset completed. If a new RAS error occurs at this moment, it
will no be able to clear the RAS source. This patch fixes it
by clear the RAS source after reset complete.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, napi_alloc_skb() is used to allocate skb for fraglist
when the head skb is not enough to hold the remaining data, and
the remaining data is added to the frags part of the fraglist skb,
leaving the linear part unused.
So this patch passes length of 0 to allocate fraglist skb with
zero size of linear data.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit e559709505 ("net: hns3: Add handling of GRO Pkts
not fully RX'ed in NAPI poll"), ring->skb is used to record the
current SKB when processing the RX BD in hns3_handle_rx_bd(),
so the parameter out_skb is unnecessary.
This patch also adjusts the err checking to reduce duplication
in hns3_handle_rx_bd(), and "err == -ENXIO" is rare case, so put
it in the unlikely annotation.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since struct hns3_enet_ring is a frequently used in critical data
path, so make it cacheline aligned as struct hns3_enet_tqp_vector.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few places that need to access the netdev of a ring
through ring->tqp->handle->kinfo.netdev, and ring->tqp is a struct
which both in enet and hclge modules, it is better to use the
struct that is only used in enet module.
This patch adds the ring_to_netdev() to access the netdev of ring
through ring->tqp_vector->napi.dev.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the TX and RX ring in a queue is bounded to the
same IRQ, there may be unnecessary barrier op when only one of
the ring need to be processed.
This patch adjusts the location of rmb() in hns3_clean_tx_ring()
and adds a checking in hns3_clean_rx_ring() to avoid unnecessary
barrier op when there is nothing to do for the ring.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mac_addr_hi32 and mac_addr_lo16 are used to store the MAC address
for management table. But using array of mac_addr[ETH_ALEN] would
be more general and not need to care about the big-endian mode of
the CPU.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only the queue_index field in struct hns3_nic_ring_data is
used, other field is unused and unnecessary for hns3 driver,
so this patch removes it and move the queue_index field to
hns3_enet_ring.
This patch also removes an unused struct hns_queue declaration.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ifndef for SECCOMP_USER_NOTIF_FLAG_CONTINUE was placed under the
ifndef for the SECCOMP_FILTER_FLAG_NEW_LISTENER feature. This will not
work on systems that do support SECCOMP_FILTER_FLAG_NEW_LISTENER but do not
support SECCOMP_USER_NOTIF_FLAG_CONTINUE. So move the latter ifndef out of
the former ifndef's scope.
2019-10-20 11:14:01 make run_tests -C seccomp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.6-0eebfed2954f152259cae0ad57b91d3ea92968e8/tools/testing/selftests/seccomp'
gcc -Wl,-no-as-needed -Wall seccomp_bpf.c -lpthread -o seccomp_bpf
seccomp_bpf.c: In function ‘user_notification_continue’:
seccomp_bpf.c:3562:15: error: ‘SECCOMP_USER_NOTIF_FLAG_CONTINUE’ undeclared (first use in this function)
resp.flags = SECCOMP_USER_NOTIF_FLAG_CONTINUE;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
seccomp_bpf.c:3562:15: note: each undeclared identifier is reported only once for each function it appears in
Makefile:12: recipe for target 'seccomp_bpf' failed
make: *** [seccomp_bpf] Error 1
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.6-0eebfed2954f152259cae0ad57b91d3ea92968e8/tools/testing/selftests/seccomp'
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: 0eebfed295 ("seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE")
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191021091055.4644-1-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl2qDnsACgkQSD+KveBX
+j60KQgAo4bJcC3e0p38gZvt6GMt5Li0+BK1OnhIf/hW9DsEJPzqNtw4g7hqXCU+
cH0YqB3q26Gq6Qg9Akuza/rY8Vfmpl1kZzfqg5/7REqC1jJBwBeIh8lOpwQh4QEh
m//hxSq/r9M59J1SdQzUu8H7xj1+aD0xrJJ3LCL2uVwe1pk7ho8sOAwjCwvidJaJ
fb56sBrkWjcL/k/Zxtic2e9Y3awfLWwN0QifPOWc/tehaMCwUpc04/o4yAyjyOy5
jY5pioEYZ6BBlLHNVZO2/kjXPIQQQt9n6H+60uVud9DWDhGwQMI2b1/3LJha6q1t
Hg2/wiHIcsoe5TZQoI5HiQNTIw6bVw==
=jBeW
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2019-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 kTLS fixes 18-10-2019
This series introduces kTLS related fixes to mlx5 driver from Tariq,
and two misc memory leak fixes form Navid Emamdoost.
Please pull and let me know if there is any problem.
I would appreciate it if you queue up kTLS fixes from the list below to
stable kernel v5.3 !
For -stable v4.13:
nett/mlx5: prevent memory leak in mlx5_fpga_conn_create_cq
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The xfs_bumplink() call has set the inode log fieldmask XFS_ILOG_CORE,
so the next xfs_trans_log_inode() call is not necessary.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Only bail out once we know that a COW allocation is actually required,
similar to how we handle normal data fork allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move more checks into the helpers that determine if we need a COW
operation or allocation and split the return path for when an existing
data for allocation has been found versus a new allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Renaming whichfork to allocfork in xfs_buffered_write_iomap_begin makes
the usage of this variable a little more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of lots of magic conditionals in the main write_begin
handler this make the intent very clear. Thing will become even
better once we support delayed allocations for extent size hints
and realtime allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move xfs_file_iomap_begin_delay near the end of the file next to the
other iomap functions to prepare for additional refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Start untangling xfs_file_iomap_begin by splitting out the read-only
case into its own set of iomap_ops with a very simply iomap_begin
helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have lots of places that want to calculate the final fsb for
a offset + count in bytes and check that the result fits into
s_maxbytes. Factor out a helper for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace our local hacks to report the source block in the main iomap
with the proper scrmap reporting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
