In addition, moving to kms->flush_commit() lets us drop the only user
of kms->commit().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Now that flush/wait/complete is decoupled from the "synchronous" part of
atomic commit_tail(), add support to defer flush to a timer that expires
shortly before vblank for async commits. In this way, multiple atomic
commits (for example, cursor updates) can be coalesced into a single
flush at the end of the frame.
v2: don't hold lock over ->wait_flush(), to avoid locking interaction
that was causing fps drop when combining page flips or non-async
atomic commits and lots of legacy cursor updates
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
With atomic commit, ->prepare_commit() and ->complete_commit() may not
be evenly balanced (although ->complete_commit() will complete each
crtc that had been previously prepared). So these will no longer be
a good place to enable/disable clocks needed for hw access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Add ->flush_commit(crtc_mask). Currently a no-op, but kms backends
should migrate writing flush registers to this hook, so we can decouple
pushing updates to hardware, and flushing the updates.
Once we add async commit support, the hw updates will be pushed down to
the hw synchronously, but flushing the updates will be deferred until as
close to vblank as possible, so that multiple updates can be combined in
a single frame.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Prep work for async commits, in which case this will be called after we
no longer have the atomic state object.
This drops some wait_for_vblanks(), but those should be unnecessary, as
we call this after waiting for flush to complete.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
First step in re-working the atomic related internal API to prepare for
async updates pending.. ->wait_flush() is intended to block until there
is no in-progress flush.
A crtc_mask is used, rather than an atomic state object, as this will
later be used for async flush after the atomic state is destroyed.
This replaces ->wait_for_crtc_commit_done()
v2: update for review comments
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously the callback was called from whoever called wait_for_vblank(),
but that isn't a great plan when wait_for_vblank() stops getting called,
and results in frame_done_timer expiring.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Just waiting for next vblank isn't ideal.. we should really be looking
at the hw FLUSH register value to know if there is still an in-progress
flush without stalling unnecessarily when there is no pending flush.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
It attempted to avoid fps drops in the presence of cursor updates. But
it is racing, and can result in hw updates after flush before vblank,
which leads to underruns.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove the default for CONFIG_DRM_MSM and let the user select the driver
manually as one does.
Additionally select QCOM_COMMAND_DB for ARCH_QCOM targets to make sure
it doesn't get missed when we need it for a6xx targets.
v2: Move from default 'm' to no default
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The extra line-break in traces was annoying me.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously, dpu_crtc_frame_event_work() would try to aquire all the
modeset locks in order to check whether it can release bandwidth. (If
we only have cmd-mode display, bandwidth can be released at frame-done
time.)
The problem with this is that it is also responsible for signalling
frame_done_comp, which dpu_crtc_commit_kickoff() waits on if there is
already a frame pending. This is called in the msm_atomic_commit_tail()
path.. which means that for non-nonblock commits, at least some of the
modeset locks are already held.
Re-work this scheme to use a reference count to track our need to have
clocks enabled. It is incremented for each atomic commit, and
decremented in the corresponding frame-done. Additionally, any crtc
used in video mode hold an extra reference while they are enabled. The
net effect is that we can determine in frame-done whether it is safe to
drop bandwidth without needing to aquire any modeset locks.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct msm_gem_submit {
...
struct {
...
} bos[0];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(*submit) + ((u64)nr_bos * sizeof(submit->bos[0]))
with:
struct_size(submit, bos, nr_bos)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove the homebrewed bulk clock get function and replace it with
devm_clk_bulk_get_all().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Creating the msm gem address space requires a reference to the dev where
the iommu is located. The driver currently assumes this is the same as
the platform device, which breaks when the iommu is outside of the
platform device (ie in the parent). Default to using the platform device,
but check to see if that has an iommu reference, and if not, use the parent
device instead. This should handle all the various iommu designs for
mdp5 supported systems.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The following errors show up when booting the Nexus 5:
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_regulator_init: failed to init regulator, ret=-517
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_driver_probe: failed to init regulator
dsi_phy_regulator_init() already logs the error, so no need to log
the same error a second time in dsi_phy_driver_probe(). This patch
also changes dsi_phy_regulator_init() to not log the error if the
error code is -EPROBE_DEFER to reduce noise in dmesg.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[add some {}'s]
Signed-off-by: Rob Clark <robdclark@chromium.org>
For platforms that require the "zap shader" to take the GPU out of
secure mode at boot, we also need the zap fw to end up in the initrd.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for MDP5 version v3.0 found on msm8998.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
[silence unitialized variable warnings]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Unused and the extra rpm get/put interferes with handover from
bootloader (ie. happens before we have a chance to check if
things are already enabled).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If booting a device using EFI, efifb will likely come up and claim the
console. When the msm display stack finally comes up, we want the
console to move over to the msm fb, so add support to kick out any
firmware based framebuffers to accomplish the console transition.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This switches the MSM HDMI code to use GPIO descriptors.
Normally we would fetch the GPIOs from the device with the
flags GPIOD_IN or GPIOD_OUT_[LOW|HIGH] to set up the lines
immediately, but since the code seems eager to actively
drive the lines high/low when turning HDMI on and off, we
just fetch the GPIOs as-is and keep the code explicitly
driving them.
The old code would try legacy bindings (GPIOs without any
"-gpios" suffix) but this has been moved to the gpiolib
as a quirk by the previous patch.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The DPU has some kind of idea that it wants to be able to
bring up power using GPIO lines. The struct dss_gpio is however
completely unused and should this be done, it should be done
using the GPIO descriptor framework rather than this API
which relies on the global GPIO numberspace. Delete this
code before anyone hurt themselves.
The inclusion of <linux/gpio.h> was abused to get some OF
and IRQ headers implicitly included into the DPU utilities,
make these includes explicit and push them down into the actual
implementation.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This DSI driver uses the new descriptor API so these old
GPIO API includes are surplus.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This file is not using any symbols from <linux/gpio.h> so just
drop this include.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Drop the deprecated drmP.h header file, and trim msm_drv.h
to the relevant include files.
This resulted in a suprisingly many edits as many files relied
on headers included via msm_drv.h.
But msm_drv.h is not supposed to carry include files it do not need, so
the individual files have to include what extra they needs.
v2:
- Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Carsten Behling <carsten.behling@googlemail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Todor Tomov <todor.tomov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
In CEE mode, the TSA information can be derived from the reported
priority value.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently if the user sets an odd value for [tx|rx]-usecs we align the
value because the hardware only understands ITR values in multiples of
2. This seems misleading because we are essentially telling the user
that the ITR value is odd, when in fact we have changed it internally.
Fix this by reporting that setting odd ITR values is not allowed.
Also, while making changes to ice_set_rc_coalesce() I noticed a bit of
code/error duplication. Make the necessary changes to remove the
duplication.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
We don't free s_rule if ice_aq_sw_rules() returns a non-zero status. If
it returned a zero status, s_rule would be freed right after, so this
implies it should be freed within the scope of the function regardless.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When run test case:
mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
mdadm -S /dev/md1
mdadm -A /dev/md1 /dev/sd[b-c] --run --force
mdadm --zero /dev/sda
mdadm /dev/md1 -a /dev/sda
echo offline > /sys/block/sdc/device/state
echo offline > /sys/block/sdb/device/state
sleep 5
mdadm -S /dev/md1
echo running > /sys/block/sdb/device/state
echo running > /sys/block/sdc/device/state
mdadm -A /dev/md1 /dev/sd[a-c] --run --force
mdadm run fail with kernel message as follow:
[ 172.986064] md: kicking non-fresh sdb from array!
[ 173.004210] md: kicking non-fresh sdc from array!
[ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[ 173.022406] md1: failed to create bitmap (-5)
In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Currently md raid0/linear are not provided with any mechanism to validate
if an array member got removed or failed. The driver keeps sending BIOs
regardless of the state of array members, and kernel shows state 'clean'
in the 'array_state' sysfs attribute. This leads to the following
situation: if a raid0/linear array member is removed and the array is
mounted, some user writing to this array won't realize that errors are
happening unless they check dmesg or perform one fsync per written file.
Despite udev signaling the member device is gone, 'mdadm' cannot issue the
STOP_ARRAY ioctl successfully, given the array is mounted.
In other words, no -EIO is returned and writes (except direct ones) appear
normal. Meaning the user might think the wrote data is correctly stored in
the array, but instead garbage was written given that raid0 does stripping
(and so, it requires all its members to be working in order to not corrupt
data). For md/linear, writes to the available members will work fine, but
if the writes go to the missing member(s), it'll cause a file corruption
situation, whereas the portion of the writes to the missing devices aren't
written effectively.
This patch changes this behavior: we check if the block device's gendisk
is UP when submitting the BIO to the array member, and if it isn't, we flag
the md device as MD_BROKEN and fail subsequent I/Os to that device; a read
request to the array requiring data from a valid member is still completed.
While flagging the device as MD_BROKEN, we also show a rate-limited warning
in the kernel log.
A new array state 'broken' was added too: it mimics the state 'clean' in
every aspect, being useful only to distinguish if the array has some member
missing. We rely on the MD_BROKEN flag to put the array in the 'broken'
state. This state cannot be written in 'array_state' as it just shows
one or more members of the array are missing but acts like 'clean', it
wouldn't make sense to write it.
With this patch, the filesystem reacts much faster to the event of missing
array member: after some I/O errors, ext4 for instance aborts the journal
and prevents corruption. Without this change, we're able to keep writing
in the disk and after a machine reboot, e2fsck shows some severe fs errors
that demand fixing. This patch was tested in ext4 and xfs filesystems, and
requires a 'mdadm' counterpart to handle the 'broken' state.
Cc: Song Liu <songliubraving@fb.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
- Low-level debugging support for RZ/A2M.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXV/PyQAKCRCKwlD9ZEnx
cPvMAQCJ+/oDXHyg48BknWJd2HRMpGAkv4/YS+TM7GWkeVc5YQEA4vF2sQV8Q1zf
NmMRB9sAHnROZb7GiLHkynHDDpjYYQk=
=r42g
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc
Renesas ARM SoC updates for v5.4
- Low-level debugging support for RZ/A2M.
* tag 'renesas-arm-soc-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: debug-ll: Add support for r7s9210
Link: https://lore.kernel.org/r/20190823123643.18799-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for SMP in thumb mode
- Fix SMP trampoline code when FORTIFY_SOURCE is enabled
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXW5yWgAKCRDKSWXLKUoM
ISrxAJ4vzP6qLTLr2vN9qDQ4XM63kQ/RiQCdEEBejxseeXtdj1xO+s4NebRlkiA=
=0zGR
-----END PGP SIGNATURE-----
Merge tag 'zynq-soc-for-v5.4' of https://github.com/Xilinx/linux-xlnx into arm/soc
ARM: Xilinx Zynq SoC patches for v5.4
- Add support for SMP in thumb mode
- Fix SMP trampoline code when FORTIFY_SOURCE is enabled
* tag 'zynq-soc-for-v5.4' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Use memcpy_toio instead of memcpy on smp bring-up
ARM: zynq: Support smp in thumb mode
Link: https://lore.kernel.org/r/8e00ba70-9403-4bf7-2870-a94758e37346@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Set up the default timeout for this new entry otherwise the garbage
collector might quickly remove it right after the flowtable insertion.
Fixes: ac2a66665e ("netfilter: add generic flow table infrastructure")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If this flag is set, timeout and state are irrelevant to userspace.
Fixes: 90964016e5 ("netfilter: nf_conntrack: add IPS_OFFLOAD status bit")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If IPv6 is disabled on boot (ipv6.disable=1), but nft_fib_inet ends up
dealing with a IPv6 packet, it causes a kernel panic in
fib6_node_lookup_1(), crashing in bad_page_fault.
The panic is caused by trying to deference a very low address (0x38
in ppc64le), due to ipv6.fib6_main_tbl = NULL.
BUG: Kernel NULL pointer dereference at 0x00000038
The kernel panic was reproduced in a host that disabled IPv6 on boot and
have to process guest packets (coming from a bridge) using it's ip6tables.
Terminate rule evaluation when packet protocol is IPv6 but the ipv6 module
is not loaded.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ice_reset_subtask needs to handle EMP resets as well, as EMP resets
can be triggered by the firmware. This patch adds the logic to do
this.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Only the ESSIV IV generation mode used to use cc->cipher so it could
instantiate the bare cipher used to encrypt the IV. However, this is
now taken care of by the ESSIV template, and so no users of cc->cipher
remain. So remove it altogether.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Replace the explicit ESSIV handling in the dm-crypt driver with calls
into the crypto API, which now possesses the capability to perform
this processing within the crypto subsystem.
Note that we reorder the AEAD cipher_api string parsing with the TFM
instantiation: this is needed because cipher_api is mangled by the
ESSIV handling, and throws off the parsing of "authenc(" otherwise.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Implement a template that wraps a (skcipher,shash) or (aead,shash) tuple
so that we can consolidate the ESSIV handling in fscrypt and dm-crypt and
move it into the crypto API. This will result in better test coverage, and
will allow future changes to make the bare cipher interface internal to the
crypto subsystem, in order to increase robustness of the API against misuse.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- A series from Anson Huang to add UID support for i.MX8 SoC and SCU
drivers.
- A series from Daniel Baluta to add DSP IPC driver for communication
between host AP (Linux) and the firmware running on DSP embedded in
i.MX8 SoCs.
- A small fix for GPCv2 error code printing.
- Switch from module_platform_driver_probe() to module_platform_driver()
for imx-weim driver, as we need the driver to probe again when device
is present later.
- Add optional burst clock mode support for imx-weim driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYoCEAAoJEFBXWFqHsHzOkDgH/jWNgp3QR3omPQGX80oM6/ga
3x78GDJyQfzZKWyOJbWz12tzXWlD1fmGIZy7SeuvXlYUbNnE1WU6ARFGDoBpjbew
DOYoPT9x7eJemSdnEE43g2vtspEzb6Afvb7dr78OPaik24eY0dFx90U0tzptmuVY
gXxkAHo2ez6txXTu5Id9Z5Deitukb8NoK/9yyzTeD0oYn2hCooAp5fAl1rKgfLnf
MpG29TCK8dxr/j7tzsbt2nutJJYy1Ybh/0WpOMXnBwdAz20JT7MU87DMil0//Q02
0Es/P2xH7K4r3ca9mupDtXZps2DbnmYJorvxpfHuMXcyq0uxGhl1/zyhTv+LW4c=
=5mGq
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.4:
- A series from Anson Huang to add UID support for i.MX8 SoC and SCU
drivers.
- A series from Daniel Baluta to add DSP IPC driver for communication
between host AP (Linux) and the firmware running on DSP embedded in
i.MX8 SoCs.
- A small fix for GPCv2 error code printing.
- Switch from module_platform_driver_probe() to module_platform_driver()
for imx-weim driver, as we need the driver to probe again when device
is present later.
- Add optional burst clock mode support for imx-weim driver.
* tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpcv2: Print the correct error code
bus: imx-weim: use module_platform_driver()
firmware: imx: Add DSP IPC protocol interface
soc: imx-scu: Add SoC UID(unique identifier) support
bus: imx-weim: optionally enable burst clock mode
firmware: imx: scu-pd: Add IRQSTR_DSP PD range
firmware: imx: scu-pd: Add mu13 b side PD range
firmware: imx: scu-pd: Rename mu PD range to mu_a
soc: imx8: Add i.MX8MM UID(unique identifier) support
soc: imx8: Add i.MX8MQ UID(unique identifier) support
Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Revised pull request to fix up a missing Signed-off-by and roll in
a fix in the lsm9ds1 support after I broke it when applying.
Revised again because the fix changed a hash meaning a fix
that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite
worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside
the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is
a compound device also including a magnetometer (st_sensors driver).
Includes bindings and precursor rework of the driver.
Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.
Cleanups and minor fixes
* MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the
value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Rework write_raw to make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
- Fix missing default of calibration vector so that we get 'something'
before calibration is complete on a given axis.
* hid-sensors
- Use int_pow instead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts
and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor
is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo in Kconfig help.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically
to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl1uyTgRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0Foideg//fknN/aM40zRZlClkWx9XqUsByS/3XUAl
dZL//5DGh566D8/auBeacQxt6SzOFRpj2XwWI/K8mGJi39y9LFOywOn4dDgOBh3x
VWe/1eCNFg9Y1eMCXncYHBtxxobuV3UKEjVtYFtzg210HP/KM6C3fWdPTpmj1zNZ
PYSnKGiBGxeJHMCUjN0QweifIRvTy0MLkxPc9CUHcFq0XiMD2enI4TwHYuZ/CNQw
oisDPPksbPTW5R547vLEnQe/p16MtoFMX57yehbzKIp6qYBEVR+D5ne5kxct8x80
Ma7YVWLyWTxYF/MwLi3felIniEeyYhgTFVhy2rhZGt6eKDmNFTwTrJG5iTweeHQm
3FJPbZ04lDjE3RhoETGDc2aSqY5/Xy1nnOJcMjZ1twbDxPGmN2/rCP3YxYRmGL/P
VCsCZYeQF6cKi7FyFiViqALTPH0k/Ebklol1f/IG8CuFCs8r/m6kKMeSJX3+miHZ
gIxA2lX5uj8FIiB1bZxORN76W5PzxLji5IiCPy1KtlBin3E3oWM3nQLXNHpzp2Fw
5A8IyHb/qDoKnO1MlTkprIxdIzKqV4gtWqkY1kTBYyNyreMP/dsiw/lC1rnzWMm/
v7JHuTbO/Ay5gvT58goK7FD77CyvRTvy3bmi7PNkWJyogWpnRTLiPusMDz7FwxK4
Ffrbi7+qijk=
=rPVR
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, cleanups and features for IIO in the 5.4 cycle
Revised pull request to fix up a missing Signed-off-by and roll in
a fix in the lsm9ds1 support after I broke it when applying.
Revised again because the fix changed a hash meaning a fix
that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite
worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside
the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is
a compound device also including a magnetometer (st_sensors driver).
Includes bindings and precursor rework of the driver.
Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.
Cleanups and minor fixes
* MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the
value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Rework write_raw to make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
- Fix missing default of calibration vector so that we get 'something'
before calibration is complete on a given axis.
* hid-sensors
- Use int_pow instead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts
and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor
is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo in Kconfig help.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically
to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.
* tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
iio: cros_ec: set calibscale for 3d MEMS to unit vector
iio: dac: ad5380: fix incorrect assignment to val
iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct
iio: imu: st_lsm6dsx: introduce update_fifo function pointer
dt-bindings: iio: light: isl29501: Rename bindings documentation file
Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
iio: st_sensors: Fix build error
dt-bindings: iio: adc: Add AD7606B ADC documentation
dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
MAINTAINERS: Add Beniamin Bia for AD7606 driver
iio: adc: ad7606: Add support for AD7606B ADC
tools: iio: add .gitignore
iio: adc: sc27xx: Change to polling mode to read data
iio: hid-sensor-attributes: Convert to use int_pow()
iio: adc: max1027: Use device-managed APIs
...
reoder function parameter and change size of the parameters
-----BEGIN PGP SIGNATURE-----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=WH2P
-----END PGP SIGNATURE-----
Merge tag 'v5.3-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
cmdq helper:
reoder function parameter and change size of the parameters
* tag 'v5.3-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: cmdq: change the type of input parameter
soc: mediatek: cmdq: reorder the parameter
Link: https://lore.kernel.org/r/8c860e37-3816-d75f-fc37-ce496905ba73@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One driver to remove a redundant error message in the Allwinner RSB
driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/5PwAKCRDj7w1vZxhR
xUPDAQDCRzdhQef1Ki9OvNcT8o5tbxLK+YcWmmrlLAA4qe2TRQEA1/Um5ZS8s8p5
MKz27KwMjt3PHVc9AoQiEzCHETKb1AA=
=safB
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers
Allwinner drivers patches for 5.4
One driver to remove a redundant error message in the Allwinner RSB
driver.
* tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Remove dev_err() usage after platform_get_irq()
Link: https://lore.kernel.org/r/f9edfc8e-19b7-4b6e-897a-35f3bdcc8643.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights
- clk-measure: support new S905X3 and A311D SoCs
- socinfo: support new S905X3 and A311D SoCs
-----BEGIN PGP SIGNATURE-----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=txyO
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: amlogic: driver updates for v5.4
Highlights
- clk-measure: support new S905X3 and A311D SoCs
- socinfo: support new S905X3 and A311D SoCs
* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: meson-gx-socinfo: Add of_node_put() before return
soc: amlogic: clk-measure: Add support for SM1
dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
soc: amlogic: meson-gx-socinfo: add A311D id
soc: amlogic: meson-clk-measure: add G12B second cluster cpu clk
soc: amlogic: meson-clk-measure: protect measure with a mutex
Link: https://lore.kernel.org/r/7h7e77cwv5.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
