- don't clear the read-only bit on a revalidate (Sagi Grimberg)
-----BEGIN PGP SIGNATURE-----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=p1oy
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.10-2020-11-10' of git://git.infradead.org/nvme into block-5.10
Pull NVMe fix from Christoph:
"nvme fixes for 5.10:
- don't clear the read-only bit on a revalidate (Sagi Grimberg)"
* tag 'nvme-5.10-2020-11-10' of git://git.infradead.org/nvme:
nvme: fix incorrect behavior when BLKROSET is called by the user
Stephen reports that commit f4693c2716 ("arm64: mm: extend linear region
for 52-bit VA configurations") triggers the following warnings when building
the htmldocs make target of today's linux-next:
Documentation/arm64/memory.rst:35: WARNING: Literal block ends without a blank line; unexpected unindent.
Documentation/arm64/memory.rst:53: WARNING: Literal block ends without a blank line; unexpected unindent.
Let's tweak the memory layout table to work around this.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: f4693c2716 ("arm64: mm: extend linear region for 52-bit VA configurations")
Link: https://lore.kernel.org/r/20201110130851.15751-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Respect bias setting when comes from ACPI
The following is an automated git shortlog grouped by driver:
intel:
- Set default bias in case no particular value given
- Fix 2 kOhm bias which is 833 Ohm
-----BEGIN PGP SIGNATURE-----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=Voi9
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.10-2
* Respect bias setting when comes from ACPI
The following is an automated git shortlog grouped by driver:
intel:
- Set default bias in case no particular value given
- Fix 2 kOhm bias which is 833 Ohm
Add codec driver for Nuvoton NAU8315.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201102023212.594137-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-compress.c is using both SND_COMPRESS_xxx and SND_PCM_STREAM_xxx.
These are defined as UAPI, and has same value.
enum {
SNDRV_PCM_STREAM_PLAYBACK = 0,
SNDRV_PCM_STREAM_CAPTURE,
...
};
enum snd_compr_direction {
SND_COMPRESS_PLAYBACK = 0,
SND_COMPRESS_CAPTURE
};
Essentially both COMPRESS and PCM_STREAM definitions are identical,
and can be never different because of ABI compatibility,
which means it's safe to mix both variants in the code.
This patch checks it by BUILD_BUG_ON(), and merge to use.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87361wmsyg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_runtime_activate() and
snd_soc_dai_digital_mute() need SNDRV_PCM_STREAM_xxx
instead of SND_COMPRESS_xxx.
These are bug but nothing happen because these are same value.
enum {
SNDRV_PCM_STREAM_PLAYBACK = 0,
SNDRV_PCM_STREAM_CAPTURE,
...
};
enum snd_compr_direction {
SND_COMPRESS_PLAYBACK = 0,
SND_COMPRESS_CAPTURE
};
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kmcmsyn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In addition, having mixer control to switch between DMICs by
using "dmic-gpios" property.
Refer to this one as an example,
commit b7a742cff3 ("ASoC: AMD: Use mixer control to switch between DMICs")
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201106061433.1483129-3-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add "LDO_VAUD18-supply" property to
control vaud18 regulator. It is labeled as required
due to mt6359 audio path always need to enable vaud18.
Signed-off-by: Shane.Chien <shane.chien@mediatek.com>
Link: https://lore.kernel.org/r/1604975492-6142-3-git-send-email-shane.chien@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vaud18 is power of mt6359 audio path. It
should only enable when audio is used,
instead of in boot up stage.
Once mt6359 audio path is enabled or disabled,
vaud18 is controlled by regulator supply widget
"LDO_VAUD18". Due to vaud18 is controlled by
regulator dapm macro instead of regmap, the macro
MT6359_LDO_VAUD18_CON0 and variable avdd_reg
is no used and removed from mt6359.h.
Signed-off-by: Shane.Chien <shane.chien@mediatek.com>
Link: https://lore.kernel.org/r/1604975492-6142-2-git-send-email-shane.chien@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will make sure applications which use the IN_FORMATS blob
to figure out which modifiers they can use will pick up the
linear modifier which is needed by mxsfb. Such applications
will not work otherwise if an incompatible implicit modifier
ends up being selected.
Before commit ae1ed00932 ("drm: mxsfb: Stop using DRM simple
display pipeline helper"), the DRM simple display pipeline
helper took care of this.
Signed-off-by: Daniel Abrecht <public@danielabrecht.ch>
Fixes: ae1ed00932 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/2a99ffffc2378209307e0992a6e97e70@nodmarc.danielabrecht.ch
idr_init() uses base 0 which is an invalid identifier. The new function
idr_init_base allows IDR to set the ID lookup from base 1. This avoids
all lookups that otherwise starts from 0 since 0 is always unused.
References: commit 6ce711f275 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105173646.GA41732@localhost
This patch adds support for Serval pinctrl, using the ocelot driver as
basis. It adds pinconfig support as well, as supported by the
platform.
gclement: Split from a larger patch adding support all platforms in
the same time.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20201106093118.965152-5-gregory.clement@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds support for Luton pinctrl, using the ocelot driver as
basis. It adds pinconfig support as well, as supported by the
platform.
gclement: Split from a larger patch adding support all platforms in
the same time.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20201106093118.965152-4-gregory.clement@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow the qcom_scm driver to be loadable as a permenent module.
This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to
ensure that drivers that call into the qcom_scm driver are
also built as modules. While not ideal in some cases its the
only safe way I can find to avoid build errors without having
those drivers select QCOM_SCM and have to force it on (as
QCOM_SCM=n can be valid for those drivers).
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20201106042710.55979-3-john.stultz@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tweaks to allow pinctrl-msm code to be loadable as a module.
This is needed in order to support having the qcom-scm driver,
which pinctrl-msm calls into, configured as a module.
This requires that we tweak Kconfigs selecting PINCTRL_MSM to
also depend on QCOM_SCM || QCOM_SCM=n so that we match the
module setting of QCOM_SCM.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20201106042710.55979-2-john.stultz@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch reworks PINCTRL_MSM to be a visible option, and
instead of having the various SoC specific drivers select
PINCTRL_MSM, this switches those configs to depend on
PINCTRL_MSM.
This is useful, as it will be needed in order to cleanly support
having the qcom-scm driver, which pinctrl-msm calls into,
configured as a module. Without this change, we would eventually
have to add dependency lines to every config that selects
PINCTRL_MSM, and that would becomes a maintenance headache.
We also add PINCTRL_MSM to the arm64 defconfig to avoid
surprises as otherwise PINCTRL_MSM/IPQ* options previously
enabled, will be off.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20201106042710.55979-1-john.stultz@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Print the status of debounce filter as follows,
$ cat /sys/kernel/debug/gpio
pin129 interrupt is disabled | interrupt is masked |
disable wakeup in S0i3 state | disable wakeup in S3 state |
disable wakeup in S4/S5 state| input is high | pull-up is disabled |
Pull-down is disabled | output is disabled |
debouncing filter disabled | 0x50000
pin130 interrupt is disabled | interrupt is masked |
disable wakeup in S0i3 state | disable wakeup in S3 state |
disable wakeup in S4/S5 state | input is high | pull-up is disabled |
Pull-down is disabled | output is disabled |
debouncing filter (high) enabled |
debouncing timeout is 124800 (us)| 0x503c8
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20201105231912.69527-4-coiby.xu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the "lcd-8bit" group to the "lcd" function.
As "lcd-24bit" is a superset of "lcd-8bit", in theory the former could
be modified to only contain the pins not already included in "lcd-8bit",
just like how it's done for the JZ4740 and JZ4725B platforms. However,
we can't do that without breaking Device Tree ABI, so in that case we
have no choice but to have two groups containing the same pins.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/20201101090104.5088-3-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Abuse the pin function pointer to store the pin function value directly,
when all the pins of a group have the same function value. Now when the
pointer value is <= 3 (unsigned), the pointer value is used as the pin
function; otherwise it is used as a regular pointer.
This drastically reduces the number of pin function tables needed, and
drops .data usage by about 2 KiB. Additionally, the few pin function
tables that are still around now contain u8 instead of int, since the
largest number that will be stored is 3.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/20201101090104.5088-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mt7622 is reported by mediatek to have only 6 pwm channels
so drop pindefines for 7th channel
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/20201016204019.2606-4-linux@fw-web.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Specify the PDC mapping for SM8250, so that gpio interrupts are
propertly mapped to the wakeup IRQs of the PDC.
Fixes: 4e3ec9e407 ("pinctrl: qcom: Add sm8250 pinctrl driver.")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201028043642.1141723-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Take over maintainership of panasonic-laptop from Harald Welte.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Link: https://lore.kernel.org/r/20200825101341.5699-1-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Panasonic laptops (at least from CF-W4 onwards) have dedicated firmware
registers for saving ac/dc and current brightness. They are a bit confusing
so here's some explanations:
AC_MIN_BRIGHT, AC_MAX_BRIGHT, DC_MIN_BRIGHT, DC_MAX_BRIGHT:
Read-only. Values: 0x01 and 0x15 respectively.
AC_CUR_BRIGHT, DC_CUR_BRIGHT:
Read-Write. 0x00-0xFF. Store user-defined AC/DC brightness. However,
they do not represent current brightness so they should be named AC_BRIGHT
and DC_BRIGHT instead.
CUR_BRIGHT (present since CF-W4):
Read-Write. 0x00-0xFF. It sets the current brightness. It won't update
itself if brightness is changed via other means, e.g. acpi_video0.
Another CUR_BRIGHT (added since CF-W5):
Read-Write. 0x01-0x15. Its value always synchronizes with current
brightness. Not implemented in this version.
Currently the backlight API interacts with AC_CUR_BRIGHT (probably because
it's the only bl register available in earlier models?). This patch adds
sysfs attributes for AC_CUR_BRIGHT, DC_CUR_BRIGHT and CUR_BRIGHT.
It also fixes the error of https://lkml.org/lkml/2020/8/19/1264.
PS: I think the backlight API should interact with CUR_BRIGHT instead of
AC_CUR_BRIGHT. But it involves complications like mapping between 0x01-0x15
or 0x00-0x14 (the backlight API) and 0x00-0xFF (CUR_BRIGHT). I'll leave the
discussion for a later version.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-10-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add battery charging threshold (aka ECO mode) support.
NOTE: The state of ECO mode is persistent until the next POST cycle which
reset it to previous state.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-9-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The return value of the sticky key on some models (e.g. CF-W5) do not
reflect its state. How to retrieve its state from firmware is unknown.
The safest bet is to reset it at module init and store its state in
pcc struct.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-6-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace ACPI prints with pr_*() macros for consistency with other platform
devices.
Clean up obsolete ACPI_HOTKEY_COMPONENT code.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-3-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The physical optical drive switch is present in Y and W series that
switches on the drive but fails to turn it off. The idea is to be able to
toggle the drive power by software and/or hardware. This patch merges
Martin Lucina <mato@kotelna.sk>'s work that took care of the software part.
Code is also added for the physical switch to power off the drive.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-2-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+oiOgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKBQIAJw6oad/FA7j9OO2
dMoaXb8UaBehGWgW2rdfWrFPV5v0DBnp/GkdRpLoZIjV3W4mBfnog7bIa4Eswlxo
Y8sZxo5/3JlgJQUkHvzR1TYk5z61lHkUw9Kj/cCyx6YdbjSl19AfFsnhQVVMuyp9
TXL2c7hxkHlw8eBGrymVu0Ip7Zq0x8O2g+8nQpmRcvaR6SBuSHdikDF/iWCtU1YW
wpk5eWEVaAO67keZOz6b+aCFHqjFX+1dUBBuPnslucYLR73Qi16hfaU9pebe97Gb
lX/MJ1bR9BeRp314cF0PYbm4WhKjRLudHOFJH8x3dj/BiYNrFK3SJGLiiTwsrAZ8
kytU0Xs=
=Ke/D
-----END PGP SIGNATURE-----
Merge v5.10-rc3 into drm-next
We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add section for kionix kxtf9.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: removed extra header from description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove xt894 specific things from motorola-mapphone-common.dtsi and add
them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as
applicable.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: shortened subject, wrapped description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
When GPIOs that are routed to PDC are used as output they can still latch
the IRQ pending at GIC. As a result the spurious IRQ was handled when the
client driver change the direction to input to starts using it as IRQ.
Currently such erroneous latched IRQ are cleared with .irq_enable callback
however if the driver continue to use GPIO as interrupt and invokes
disable_irq() followed by enable_irq() then everytime during enable_irq()
previously latched interrupt gets cleared.
This can make edge IRQs not seen after enable_irq() if they had arrived
after the driver has invoked disable_irq() and were pending at GIC.
Move clearing erroneous IRQ to .irq_request_resources callback as this is
the place where GPIO direction is changed as input and its locked as IRQ.
While at this add a missing check to invoke msm_gpio_irq_clear_unmask()
from .irq_enable callback only when GPIO is not routed to PDC.
Fixes: e35a6ae0eb ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1604561884-10166-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-kc1.dt.yaml
CHECK arch/arm/boot/dts/omap4-kc1.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-kc1.dt.yaml: pwmleds: 'green', 'orange' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
RTC is 32.768kHz thus 512 RtcClk equals 15625 usec. The documentation
likely has dropped precision and that's why the driver mistakenly took
the slightly deviated value.
Cc: stable@vger.kernel.org
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/linux-gpio/2f4706a1-502f-75f0-9596-cc25b4933b6c@redhat.com/
Link: https://lore.kernel.org/r/20201105231912.69527-3-coiby.xu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix.
Use it instead of the deprecated "synopsys" one.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
