Support for LSE atomic instructions (CONFIG_ARM64_LSE_ATOMICS) relies on
a static key to select between the legacy LL/SC implementation which is
available on all arm64 CPUs and the super-duper LSE implementation which
is available on CPUs implementing v8.1 and later.
Unfortunately, when building a kernel with CONFIG_JUMP_LABEL disabled
(e.g. because the toolchain doesn't support 'asm goto'), the static key
inside the atomics code tries to use atomics itself. This results in a
mess of circular includes and a build failure:
In file included from ./arch/arm64/include/asm/lse.h:11,
from ./arch/arm64/include/asm/atomic.h:16,
from ./include/linux/atomic.h:7,
from ./include/asm-generic/bitops/atomic.h:5,
from ./arch/arm64/include/asm/bitops.h:26,
from ./include/linux/bitops.h:19,
from ./include/linux/kernel.h:12,
from ./include/asm-generic/bug.h:18,
from ./arch/arm64/include/asm/bug.h:26,
from ./include/linux/bug.h:5,
from ./include/linux/page-flags.h:10,
from kernel/bounds.c:10:
./include/linux/jump_label.h: In function ‘static_key_count’:
./include/linux/jump_label.h:254:9: error: implicit declaration of function ‘atomic_read’ [-Werror=implicit-function-declaration]
return atomic_read(&key->enabled);
^~~~~~~~~~~
[ ... more of the same ... ]
Since LSE atomic instructions are not critical to the operation of the
kernel, make them depend on JUMP_LABEL at compile time.
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The contents of 'asm/atomic_arch.h' can be split across some of our
other 'asm/' headers. Remove it.
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The 'alt_lse' assembly macro has been unused since 7c8fc35dfc
("locking/atomics/arm64: Replace our atomic/lock bitop implementations
with asm-generic").
Remove it.
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The recent change to shuffle the codec initialization procedure for
Realtek via commit 607ca3bd22 ("ALSA: hda/realtek - EAPD turn on
later") caused the silent output on some machines. This change was
supposed to be safe, but it isn't actually; some devices have quirk
setups to override the EAPD via COEF or BTL in the additional verb
table, which is applied at the beginning of snd_hda_gen_init(). And
this EAPD setup is again overridden in alc_auto_init_amp().
For recovering from the regression, tell snd_hda_gen_init() not to
apply the verbs there by a new flag, then apply the verbs in
alc_init().
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727
Fixes: 607ca3bd22 ("ALSA: hda/realtek - EAPD turn on later")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This switches to using common code for the DMA allocations, including
potential use of the CMA allocator if configured.
Switching to the generic code enables DMA allocations from atomic
context, which is required by the DMA API documentation, and also
adds various other minor features drivers start relying upon. It
also makes sure we have on tested code base for all architectures
that require uncached pte bits for coherent DMA allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Stop providing our own arch alloc/free hooks for nommu platforms and
just expose the segment offset and use the generic dma-direct
allocator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>From Gen12 onwards, HDCP HW block is implemented within transcoders.
Till Gen11 HDCP HW block was part of DDI.
Hence required changes in HW programming is handled here.
As ME FW needs the transcoder detail on which HDCP is enabled
on Gen12+ platform, we are populating the detail in hdcp_port_data.
v2:
_MMIO_TRANS is used [Lucas and Daniel]
platform check is moved into the caller [Lucas]
v3:
platform check is moved into a macro [Shashank]
v4:
Few optimizations in the coding [Shashank]
v5:
Fixed alignment in macro definition in i915_reg.h [Shashank]
unused variables "reg" is removed.
v6:
Configuring the transcoder at compute_config.
transcoder is used instead of pipe in macros.
Rebased.
v7:
transcoder is cached at intel_hdcp
hdcp_port_data is configured with transcoder index asper ME FW.
v8:
s/trans/cpu_transcoder
s/tc/cpu_transcoder
v9:
rep_ctl is prepared for TCD too.
return moved into deault of rep_ctl prepare function [Shashank]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-7-ramalingam.c@intel.com
On gen12+ platforms, HDCP HW is associated to the transcoder.
Hence on every modeset update associated transcoder into the
intel_hdcp of the port.
v2:
s/trans/cpu_transcoder [Jani]
v3:
comment is added for fw_ddi init for gen12+ [Shashank]
only hdcp capable transcoder is translated into fw_tc [Shashank]
v4:
fw_tc initialization is kept for modeset. [Tomas]
few extra doc is added at port_data init [Tomas]
v5:
Few comments are improvised [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-6-ramalingam.c@intel.com
For gen12+ platform we need to pass the transcoder info
as part of the port info into ME FW.
This change fills the payload for ME FW from hdcp_port_data.
v2:
Doc is enhanced for physical_port and attached_transcoder [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-5-ramalingam.c@intel.com
I915 needs to send the index of the transcoder as per ME FW.
To support this, define enum mei_fw_tc and add as a member into
the struct hdcp_port_data.
v2:
Typo in commit msg is fixed [Shashank]
v3:
kdoc is added for mei_fw_tc [Tomas]
s/MEI_TC_x/MEI_TRANSCODER_x
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-4-ramalingam.c@intel.com
We dont need the definition of the enum port outside I915, anymore.
Hence move enum port definition into I915 driver itself.
v2:
intel_display.h is included in intel_hdcp.h
v3:
enum port is declared in headers.
v4:
commit msg is rephrased.
v5:
copyright year is updated [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-3-ramalingam.c@intel.com
I915 converts it's port value into ddi index defiend by ME FW
and pass it as a member of hdcp_port_data structure.
Hence expose the enum mei_fw_ddi to I915 through
i915_mei_interface.h.
v2:
Copyright years are bumped [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-2-ramalingam.c@intel.com
Let's add some unit tests for the recent bugs we just fixed.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-4-mripard@kernel.org
The named modes support has introduced a number of glitches that were in
part due to the fact that the parser will take any string as a named mode.
Since we shouldn't have a lot of options there (and they should be pretty
standard), let's introduce a whitelist of the available named modes so that
the kernel can differentiate between a poorly formed command line and a
named mode.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-3-mripard@kernel.org
The command line parser when it has been rewritten introduced a regression
when the only thing on the command line is an option to force the detection
of a connector (such as video=HDMI-A-1:d), which are completely valid.
It's been further broken by the support for the named modes which take
anything that is not a resolution as a named mode.
Let's fix this by running the extra command line option parser on the named
modes if they only take a single character.
Fixes: e08ab74bd4 ("drm/modes: Rewrite the command line parser")
Reported-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Reported-by: Thomas Graichen <thomas.graichen@googlemail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-2-mripard@kernel.org
Some extra command line options can be either specified without anything
else on the command line (basically all the force connection options), but
some other are only relevant when matched with a resolution (margin and
interlace).
Let's add a switch to restrict if needed the available option set.
Fixes: e08ab74bd4 ("drm/modes: Rewrite the command line parser")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-1-mripard@kernel.org
When CRYPTO_DEV_HISI_SEC=y, below compilation error is found after
'commit 894b68d8be ("crypto: hisilicon/des - switch to new verification routines")':
drivers/crypto/hisilicon/sec/sec_algs.o: In function `sec_alg_skcipher_setkey_des_cbc':
sec_algs.c:(.text+0x11f0): undefined reference to `des_expand_key'
drivers/crypto/hisilicon/sec/sec_algs.o: In function `sec_alg_skcipher_setkey_des_ecb':
sec_algs.c:(.text+0x1390): undefined reference to `des_expand_key'
make: *** [vmlinux] Error 1
This because DES library has been moved to lib/crypto in this commit
'04007b0e6c ("crypto: des - split off DES library from generic DES cipher driver")'.
Fix this by selecting CRYPTO_LIB_DES in CRYPTO_DEV_HISI_SEC.
Fixes: 04007b0e6c ("crypto: des - split off DES library from generic DES cipher driver")
Fixes: 894b68d8be ("crypto: hisilicon/des - switch to new verification routines")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lib/crypto/sha256.c / lib/crypto/libsha256.o may end up being a module,
so it needs a MODULE_LICENSE() line, add this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.
Since the ccp driver already has a fallback skcipher standby for
dealing with input sizes other than [16, 512, 1024, 2048, 4096],
just drop the check against the block size.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/nx/nx.h:12:19: warning:
nx_driver_string defined but not used [-Wunused-const-variable=]
drivers/crypto/nx/nx.h:13:19: warning:
nx_driver_version defined but not used [-Wunused-const-variable=]
They are never used, so just remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/atmel-i2c.h:68:3: warning:
error_list defined but not used [-Wunused-const-variable=]
error_list is only used in atmel-i2c.c,
so just move the definition over there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto/aegis.h:27:32: warning:
crypto_aegis_const defined but not used [-Wunused-const-variable=]
crypto_aegis_const is only used in aegis128-core.c,
just move the definition over there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Per feedback from NXP tech support the way to use register based
service interface on i.MX8MQ is to follow the same set of steps
outlined for the case when virtualization is enabled, regardless if it
is. Current version of SRM for i.MX8MQ speaks of DECO DID_MS and DECO
DID_LS registers, but apparently those are not implemented, so the
case when SCFGR[VIRT_EN]=0 should be handled the same as the case when
SCFGR[VIRT_EN]=1
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
i.MX8 mScale SoC still use 32-bit addresses in its CAAM implmentation,
so we can't rely on sizeof(dma_addr_t) to detemine CAAM pointer
size. Convert the code to query CTPR and MCFGR for that during driver
probing.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using dma_addr_t for elements of JobR input ring is not appropriate on
all 64-bit SoCs, some of which, like i.MX8MQ, use only 32-bit wide
pointers there. Convert all of the code to use explicit helper
function that can be later extended to support i.MX8MQ. No functional
change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using struct jr_outentry to specify the layout of JobR output ring is
not appropriate for all 64-bit SoC, since some of them, like i.MX8MQ,
use 32-bit pointers there which doesn't match 64-bit
dma_addr_t. Convert existing code to use explicit helper functions to
access any of the JobR output ring elements, so that the support for
i.MX8MQ can be added later. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of selecting the implementation of
cpu_to_caam_dma()/caam_dma_to_cpu() at build time using the
preprocessor, convert the code to do that at run-time using IS_ENABLED
macro. This is needed to add support for i.MX8MQ. No functional change
intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to be able to configure CAAM pointer size at run-time, which
needed to support i.MX8MQ, which is 64-bit SoC with 32-bit pointer
size, convert CAAM_PTR_SZ to refer to a global variable of the same
name ("caam_ptr_sz") and adjust the rest of the code accordingly. No
functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Both qi.h and cammalg_qi2.h seem to define identical versions of
MAX_SDLEN. Move it to desc_constr.h to avoid duplication.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since 32-bit of both wr_reg64 and rd_reg64 now use 64-bit IO helpers,
these functions should no longer be necessary. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the same transformation logic as outlined in previous commit
converting wr_reg64, convert rd_reg64 to use helpers from
<linux/io-64-nonatomic-hi-lo.h> first. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to avoid any risk of JR IRQ request being handled while some
of the resources used for that are not yet allocated move the code
requesting said IRQ to the endo of caam_jr_init().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devres to allocate all of the resources in caam_jr_init() (DMA
coherent and regular memory, IRQs) drop calls to corresponding
deallocation routines. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Exactly the same code to figure out DMA mask is repeated twice in the
driver code. To avoid repetition, move that logic into a standalone
subroutine in intern.h. While at it re-shuffle the code to make it
more readable with early returns.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Until now, the inside-secure driver required a set of firmware images
supplied by the silicon vendor, typically under NDA, to be present in
/lib/firmware/inside-secure in order to be able to function.
This patch removes the dependence on this official vendor firmware by
falling back to generic "mini" FW - developed specifically for this
driver - that can be provided under GPL 2.0 through linux-firmwares.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for a PCIE development board with FPGA from Xilinx,
to facilitate pre-silicon driver development by both Inside Secure and its
IP customers. Since Inside Secure neither produces nor has access to actual
silicon, this is required functionality to allow us to contribute.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This removes some code determine which engine has which algorithms which
was effectively redundant (may have been forward-looking?) due to always
enabling all algorithms for all currently supported engines.
A future patch will use a different, more scalable approach to achieve
this. This is removed now because otherwise the next patch will add new
hardware which would otherwise have to be added to all algorithms, so
now is a convenient time to just get rid of this.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While being a generic EIP97/EIP197 driver, the driver was only selectable
for Marvell Armada hardware. This fix makes the driver selectable for any
Device Tree supporting kernel configuration, allowing it to be used for
other compatible hardware by just adding the correct device tree entry.
It also allows the driver to be selected for PCI(E) supporting kernel con-
figurations, to be able to use it with PCIE based FPGA development boards
for pre-silicon driver development by both Inside Secure and its IP custo-
mers.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Align the s5p ctr(aes) implementation with other implementations
of the same mode, by setting the block size to 1.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The s5p skcipher driver returns -EINVAL for zero length inputs, which
deviates from the behavior of the generic ECB template, and causes fuzz
tests to fail. In cases where the input is not a multiple of the AES
block size (and the chaining mode is not CTR), it prints an error to
the kernel log, which is a thing we usually try to avoid in response
to situations that can be triggered by unprivileged users.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an accelerated version of the 'essiv(cbc(aes),sha256)' skcipher,
which is used by fscrypt or dm-crypt on systems where CBC mode is
signficantly more performant than XTS mode (e.g., when using a h/w
accelerator which supports the former but not the latter) This avoids
a separate call into the AES cipher for every invocation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The plain CBC driver and the CTS one share some code that iterates over
a scatterwalk and invokes the CBC asm code to do the processing. The
upcoming ESSIV/CBC mode will clone that pattern for the third time, so
let's factor it out first.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a test vector for the ESSIV mode that is the most widely used,
i.e., using cbc(aes) and sha256, in both skcipher and AEAD modes
(the latter is used by tcrypt to encapsulate the authenc template
or h/w instantiations of the same)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building the new aegis128 NEON code in big endian mode, Clang
complains about the const uint8x16_t permute vectors in the following
way:
crypto/aegis128-neon-inner.c:58:40: warning: vector initializers are not
compatible with NEON intrinsics in big endian mode
[-Wnonportable-vector-initialization]
static const uint8x16_t shift_rows = {
^
crypto/aegis128-neon-inner.c:58:40: note: consider using vld1q_u8() to
initialize a vector from memory, or vcombine_u8(vcreate_u8(), vcreate_u8())
to initialize from integer constants
Since the same issue applies to the uint8x16x4_t loads of the AES Sbox,
update those references as well. However, since GCC does not implement
the vld1q_u8_x4() intrinsic, switch from IS_ENABLED() to a preprocessor
conditional to conditionally include this code.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The help section says that the module will be called 'pipcoxcell_crypto'.
This is likely a typo.
Use 'picoxcell_crypto' instead
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit a0085f2510.
This commit has caused regressions in notebooks that support suspend
to idle such as the XPS 9360, XPS 9370 and XPS 9380.
These notebooks will wakeup from suspend to idle from an unsolicited
advertising packet from an unpaired BLE device.
In a bug report it was sugggested that this is caused by a generic
lack of LE privacy support. Revert this commit until that behavior
can be avoided by the kernel.
Fixes: a0085f2510 ("Bluetooth: btusb: driver to enable the usb-wakeup feature")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=200039
Link: https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2
Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/
CC: Bastien Nocera <hadess@hadess.net>
CC: Christian Kellner <ckellner@redhat.com>
CC: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
