Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config
CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As an internal function that will be used by both perf and libperf, but
is not exported at this point.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's part of the libperf library as one of basic functions operating
on the perf_cpu_map class.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch the rest of the perf code to use libperf's perf_cpu_map__nr(),
which is the same as current cpu_map__nr() and remove the cpu_map__nr()
function.
Link: http://lkml.kernel.org/n/tip-6e0guy75clis7nm0xpuz9fga@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to use the custom rpc_task_setup here to set the
RPC_TASK_NO_ROUND_ROBIN flag on the RPC call.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An async call followed by an rpc_wait_for_completion() is basically the
same as a synchronous call, so we can use nfs4_call_sync_custom() to
keep our custom callback ops and the RPC_TASK_NO_ROUND_ROBIN flag.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are a few cases where we need to manually configure the
rpc_task_setup structure to get the behavior we want.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull USB validation patches. It's based on the latest 5.3 development
branch, so we shall catch up the whole things.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I think gcc is confused as I don't see how size could be used
uninitialized, but go ahead and silence the warning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hiding page refcount manipulation inside a low-level bio helper is
somewhat awkward. Instead return the same page information to the
callers, where it fits in much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Passsthrough bio handling should be the same as normal bio handling,
except that we need to take hardware limitations into account. Thus
use the common try_merge implementation after checking the hardware
limits. This changes behavior in that we now also check segment
and dma boundary settings for same page merges, which is a little
more work but has no effect as those need to be larger than the
page size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we can add more data into an existing segment we do not create a gap
per definition, so move the check for a gap after the attempt to merge
into the segment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While reviewing lockdown patches, I discovered that we still enable
/dev/port (CONFIG_DEVPORT) in skiroot.
/dev/port is used for old x86 style IO accesses. It's set up in
drivers/char/mem.c, and is only created if arch_has_dev_port() returns
true. Per arch/powerpc/include/asm/io.h, on PPC64 with PCI, this is
only true if there's a legacy ISA bridge.
Even if a system has a legacy ISA bridge installed, we have no
business accessing it in skiroot.
Deselect CONFIG_DEVPORT for skiroot.
Signed-off-by: Daniel Axtens <dja@axtens.net>
[mpe: Incorporate emailed comments into the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627053008.29315-1-dja@axtens.net
Currently some binary files which are generated when tests are compiled
are not ignored by git, so 'git status' catch them.
For copyloops test, fix wrong binary names already in .gitignore. For
ptrace, security, and stringloops tests add missing binary names to the
.gitignore file.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814205638.25322-2-gromero@linux.ibm.com
If a PCI device is removed during eeh_pe_report_edev(), between the
calls to device_lock() and device_unlock(), edev->pdev will change and
cause a crash as the wrong mutex is released.
To correct this, hold the PCI rescan/remove lock while taking a copy
of edev->pdev and performing a get_device() on it. Use this value to
release the mutex, but also pass it through to the device driver's EEH
handlers so that they always see the same device.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3c590579a0faa24d20c826dcd26c739eb4d454e6.1565930772.git.sbobroff@linux.ibm.com
Convert existing messages, where appropriate, to use the eeh_edev_*
logging macros.
The only effect should be minor adjustments to the log messages, apart
from:
- A new message in pseries_eeh_probe() "Probing device" to match the
powernv case.
- The "Probing device" message in pnv_eeh_probe() is now generated
slightly later, which will mean that it is no longer emitted for
devices that aren't probed due to the initial checks.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce505a0a7a4a5b0367f0f40f8b26e7c0a9cf4cb7.1565930772.git.sbobroff@linux.ibm.com
Now that struct eeh_dev includes the BDFN of it's PCI device, make use
of it to replace eeh_edev_info() with a set of dev_dbg()-style macros
that only need a struct edev.
With the BDFN available without the struct pci_dev, eeh_pci_name() is
now unnecessary, so remove it.
While only the "info" level function is used here, the others will be
used in followup work.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f90ae9a53d762be7b0ccbad79e62b5a1b4f4996e.1565930772.git.sbobroff@linux.ibm.com
Preparation for removing pci_dn from the powernv EEH code. The only
thing we really use pci_dn for is to get the bdfn of the device for
config space accesses, so adding that information to eeh_dev reduces
the need to carry around the pci_dn.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[SB: Re-wrapped commit message, fixed whitespace damage.]
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e458eb69a1f591d8a120782f23a8506b15d3c654.1565930772.git.sbobroff@linux.ibm.com
Now that EEH support for all devices (on PowerNV and pSeries) is
provided by the pcibios bus add device hooks, eeh_probe_devices() and
eeh_addr_cache_build() are redundant and can be removed.
Move the EEH enabled message into it's own function so that it can be
called from multiple places.
Note that previously on pSeries, useless EEH sysfs files were created
for some devices that did not have EEH support and this change
prevents them from being created.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/33b0a6339d5ac88693de092d6fba984f2a5add66.1565930772.git.sbobroff@linux.ibm.com
On PowerNV and pSeries, devices currently acquire EEH support from
several different places: Boot-time devices from eeh_probe_devices()
and eeh_addr_cache_build(), Virtual Function devices from the pcibios
bus add device hooks and hot plugged devices from pci_hp_add_devices()
(with other platforms using other methods as well). Unfortunately,
pSeries machines currently discover hot plugged devices using
pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do
not receive EEH support.
Rather than adding another case for pci_rescan_bus(), this change
widens the scope of the pcibios bus add device hooks so that they can
handle all devices. As a side effect this also supports devices
discovered after manually rescanning via /sys/bus/pci/rescan.
Note that on PowerNV, this change allows the EEH subsystem to become
enabled after boot as long as it has not been forced off, which was
not previously possible (it was already possible on pSeries).
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/72ae8ae9c54097158894a52de23690448de38ea9.1565930772.git.sbobroff@linux.ibm.com
The EEH address cache is currently initialized and populated by a
single function: eeh_addr_cache_build(). While the initial population
of the cache can only be done once resources are allocated,
initialization (just setting up a spinlock) could be done much
earlier.
So move the initialization step into a separate function and call it
from a core_initcall (rather than a subsys initcall).
This will allow future work to make use of the cache during boot time
PCI scanning.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0557206741bffee76cdfff042f65321f6f7a5b41.1565930772.git.sbobroff@linux.ibm.com
The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the
use of driver callbacks in drivers that have been bound part way
through the recovery process. This is necessary to prevent later stage
handlers from being called when the earlier stage handlers haven't,
which can be confusing for drivers.
However, the flag is set for all devices that are added after boot
time and only cleared at the end of the EEH recovery process. This
results in hot plugged devices erroneously having the flag set during
the first recovery after they are added (causing their driver's
handlers to be incorrectly ignored).
To remedy this, clear the flag at the beginning of recovery
processing. The flag is still cleared at the end of recovery
processing, although it is no longer really necessary.
Also clear the flag during eeh_handle_special_event(), for the same
reasons.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8ca5629d27de74c957d4f4b250177d1b6fc4bbd.1565930772.git.sbobroff@linux.ibm.com
The pcibios_init() function for PowerPC 64 currently calls
pci_bus_add_devices() before pcibios_resource_survey(). This means
that at boot time, when the pcibios_bus_add_device() hooks are called
by pci_bus_add_devices(), device resources have not been allocated and
they are unable to perform EEH setup, so a separate pass is needed.
This patch adjusts that order so that it will become possible to
consolidate the EEH setup work into a single location.
The only functional change is to execute pcibios_resource_survey()
(excepting ppc_md.pcibios_fixup(), see below) before
pci_bus_add_devices() instead of after it.
Because pcibios_scan_phb() and pci_bus_add_devices() are called
together in a loop, this must be broken into one loop for each call.
Then the call to pcibios_resource_survey() is moved up in between
them. This changes the ordering but because pcibios_resource_survey()
also calls ppc_md.pcibios_fixup(), that call is extracted out into
pcibios_init() to where pcibios_resource_survey() was, so that it is
not moved.
The only other caller of pcibios_resource_survey() is the PowerPC 32
version of pcibios_init(), and therefore, that is modified to call
ppc_md.pcibios_fixup() right after pcibios_resource_survey() so that
there is no functional change there at all.
The re-arrangement will cause very few side-effects because at this
stage in the boot, pci_bus_add_devices() does very little:
- pci_create_sysfs_dev_files() does nothing (no sysfs yet)
- pci_proc_attach_device() does nothing (no proc yet)
- device_attach() does nothing (no drivers yet)
This leaves only the pci_final_fixup calls, D3 support, and marking
the device as added. Of those, only the pci_final_fixup calls have the
potential to be affected by resource allocation.
The only pci_final_fixup handlers that touch resources seem to be one
for x86 (pci_amd_enable_64bit_bar()), and a PowerPC 32 platform driver
(quirk_final_uli1575()), neither of which use this pcibios_init()
function. Even if they did, it would almost certainly be a bug, under
the current ordering, to rely on or make changes to resources before
they were allocated.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4506b0489eabd0921a3587d90bd44c7683f3472d.1565930772.git.sbobroff@linux.ibm.com
The KBUILD_ARFLAGS addition in arch/powerpc/Makefile has never worked
in a useful way because it is always overridden by the following code
in the top Makefile:
# use the deterministic mode of AR if available
KBUILD_ARFLAGS := $(call ar-option,D)
The code in the top Makefile was added in 2011, by commit 40df759e2b
("kbuild: Fix build with binutils <= 2.19").
The KBUILD_ARFLAGS addition for ppc has always been dead code from the
beginning.
Nobody has reported a problem since 43c9127d94 ("powerpc: Add option
to use thin archives"), so this code was unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190713032106.8509-1-yamada.masahiro@socionext.com
It seems that 'yfs_RXYFSStoreOpaqueACL2' should be use in
yfs_fs_store_opaque_acl2().
Fixes: f5e4546347 ("afs: Implement YFS ACL setting")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The afs_lookup trace event can cause the following:
[ 216.576777] BUG: kernel NULL pointer dereference, address: 000000000000023b
[ 216.576803] #PF: supervisor read access in kernel mode
[ 216.576813] #PF: error_code(0x0000) - not-present page
...
[ 216.576913] RIP: 0010:trace_event_raw_event_afs_lookup+0x9e/0x1c0 [kafs]
If the inode from afs_do_lookup() is an error other than ENOENT, or if it
is ENOENT and afs_try_auto_mntpt() returns an error, the trace event will
try to dereference the error pointer as a valid pointer.
Use IS_ERR_OR_NULL to only pass a valid pointer for the trace, or NULL.
Ideally the trace would include the error value, but for now just avoid
the oops.
Fixes: 80548b0399 ("afs: Add more tracepoints")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fix a leak on the cell refcount in afs_lookup_cell_rcu() due to
non-clearance of the default error in the case a NULL cell name is passed
and the workstation default cell is used.
Also put a bit at the end to make sure we don't leak a cell ref if we're
going to be returning an error.
This leak results in an assertion like the following when the kafs module is
unloaded:
AFS: Assertion failed
2 == 1 is false
0x2 == 0x1 is false
------------[ cut here ]------------
kernel BUG at fs/afs/cell.c:770!
...
RIP: 0010:afs_manage_cells+0x220/0x42f [kafs]
...
process_one_work+0x4c2/0x82c
? pool_mayday_timeout+0x1e1/0x1e1
? do_raw_spin_lock+0x134/0x175
worker_thread+0x336/0x4a6
? rescuer_thread+0x4af/0x4af
kthread+0x1de/0x1ee
? kthread_park+0xd4/0xd4
ret_from_fork+0x24/0x30
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
If after an MMIO exit to userspace a VCPU is immediately run with an
immediate_exit request, such as when a signal is delivered or an MMIO
emulation completion is needed, then the VCPU completes the MMIO
emulation and immediately returns to userspace. As the exit_reason
does not get changed from KVM_EXIT_MMIO in these cases we have to
be careful not to complete the MMIO emulation again, when the VCPU is
eventually run again, because the emulation does an instruction skip
(and doing too many skips would be a waste of guest code :-) We need
to use additional VCPU state to track if the emulation is complete.
As luck would have it, we already have 'mmio_needed', which even
appears to be used in this way by other architectures already.
Fixes: 0d640732db ("arm64: KVM: Skip MMIO insn after emulation")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
This patch removes the variable flags which is now unused thanks
to the new DES helpers.
Fixes: 9d574ae8eb ("crypto: talitos/des - switch to new...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix build breakage caused by the DES library refactor.
Fixes: d4b90dbc85 ("crypto: n2/des - switch to new verification routines")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HS200 is not implemented in the driver, but the controller claims it
through caps. Remove it via a quirk, to make sure the mmc core do not try
to enable HS200, as it causes the eMMC initialization to fail.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: bb5f8ea4d5 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On AArch64 the TCR_EL1.TBI0 bit is set by default, allowing userspace
(EL0) to perform memory accesses through 64-bit pointers with a non-zero
top byte. Introduce the document describing the relaxation of the
syscall ABI that allows userspace to pass certain tagged pointers to
kernel syscalls.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Acked-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
You have to cut it off at the neck, otherwise it just reappears in the
next merge, like it did in commit 3f866026f0ce ("Merge drm/drm-next
into drm-intel-next-queued")
References: 3f866026f0ce ("Merge drm/drm-next into drm-intel-next-queued")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822065917.18988-1-chris@chris-wilson.co.uk
The correct gic number of pwrap is 185 instead of 209. This patch fixes
it to avoid triggering error interrupt.
Fixes: e526c9bc11 ("arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile")
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds basic support for MT7629 reference board.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
We can't rely on ->peer_features in calc_target() because it may be
called both when the OSD session is established and open and when it's
not. ->peer_features is not valid unless the OSD session is open. If
this happens on a PG split (pg_num increase), that could mean we don't
resend a request that should have been resent, hanging the client
indefinitely.
In userspace this was fixed by looking at require_osd_release and
get_xinfo[osd].features fields of the osdmap. However these fields
belong to the OSD section of the osdmap, which the kernel doesn't
decode (only the client section is decoded).
Instead, let's drop this feature check. It effectively checks for
luminous, so only pre-luminous OSDs would be affected in that on a PG
split the kernel might resend a request that should not have been
resent. Duplicates can occur in other scenarios, so both sides should
already be prepared for them: see dup/replay logic on the OSD side and
retry_attempt check on the client side.
Cc: stable@vger.kernel.org
Fixes: 7de030d6b1 ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT")
Link: https://tracker.ceph.com/issues/41162
Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
When ceph_mdsc_do_request returns an error, we can't assume that the
filelock_reply pointer will be set. Only try to fetch fields out of
the r_reply_info when it returns success.
Cc: stable@vger.kernel.org
Reported-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage().
invalidatepage() clears page's private flag, if dirty flag is not
cleared, the page may cause BUG_ON failure in ceph_set_page_dirty().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40862
Signed-off-by: Erqi Chen <chenerqi@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
