Commit graph

982,081 commits

Author SHA1 Message Date
Andrew Jeffery
27d1f73670 pinctrl: aspeed: Add PIN_DECL_3() helper
This case is common in the AST2600, so add to the collection.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20190729055604.13239-4-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:39:48 +02:00
Andrew Jeffery
7b38897081 pinctrl: aspeed: Rename pin declaration macros
Rename macros as follows:

* s/SS_PIN_DECL()/PIN_DECL_1()/
* s/MS_PIN_DECL()/PIN_DECL_2()/
* s/MS_PIN_DECL_()/PIN_DECL_()/

This is in preparation for adding PIN_DECL_3(). We could clean this up
with e.g. CPPMAGIC_MAP() from ccan, but that might be a bridge too far
given how much of a macro jungle we already have.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20190729055604.13239-3-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:39:27 +02:00
Andrew Jeffery
7488838f23 dt-bindings: pinctrl: aspeed: Document AST2600 pinmux
The AST260 differs from the 2400 and 2500 in that it supports multiple
groups for a subset of functions.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20190729055604.13239-2-andrew@aj.id.au
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:38:41 +02:00
Icenowy Zheng
fb18f1887f pinctrl: sunxi: v3s: introduce support for V3
Introduce the GPIO pins that is only available on V3 (not on V3s) to the
V3s pinctrl driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Link: https://lore.kernel.org/r/20190728031227.49140-2-icenowy@aosc.io
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:35:29 +02:00
Anders Roxell
6161dc0358 pinctrl: qcom: spmi-gpio: Mark expected switch fall-through
When fall-through warnings was enabled by default the following warnings
was starting to show up:

../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c: In function ‘pmic_gpio_populate’:
../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:815:20: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   pad->have_buffer = true;
   ~~~~~~~~~~~~~~~~~^~~~~~
../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:816:2: note: here
  case PMIC_GPIO_SUBTYPE_GPIOC_4CH:
  ^~~~
../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:820:20: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   pad->have_buffer = true;
   ~~~~~~~~~~~~~~~~~^~~~~~
../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:821:2: note: here
  case PMIC_GPIO_SUBTYPE_GPIOC_8CH:
  ^~~~

Rework so that the compiler doesn't warn about fall-through.

Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20190726112816.19723-1-anders.roxell@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:33:28 +02:00
Anders Roxell
cd927f140d pinctrl: rockchip: Mark expected switch fall-through
When fall-through warnings was enabled by default the following warning
was starting to show up:

../drivers/pinctrl/pinctrl-rockchip.c: In function ‘rockchip_gpio_set_config’:
../drivers/pinctrl/pinctrl-rockchip.c:2783:3: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   rockchip_gpio_set_debounce(gc, offset, true);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/pinctrl/pinctrl-rockchip.c:2795:2: note: here
  default:
  ^~~~~~~

Rework so that the compiler doesn't warn about fall-through. Add
'return -ENOTSUPP;' to match the comment.

Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20190726112812.19665-1-anders.roxell@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:32:27 +02:00
YueHaibing
be65c8bb0c pinctrl: oxnas: remove set but not used variable 'arg'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/pinctrl/pinctrl-oxnas.c: In function oxnas_ox810se_pinconf_set:
drivers/pinctrl/pinctrl-oxnas.c:905:6: warning: variable arg set but not used [-Wunused-but-set-variable]
drivers/pinctrl/pinctrl-oxnas.c: In function oxnas_ox820_pinconf_set:
drivers/pinctrl/pinctrl-oxnas.c:944:6: warning: variable arg set but not used [-Wunused-but-set-variable]

It is never used since commit 4b0c0c25fa ("pinctrl:
oxnas: Add support for OX820"), so can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190725142419.29892-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:15:56 +02:00
Alexandre Torgue
a502b343eb pinctrl: stmfx: update pinconf settings
According to the following tab (coming from STMFX datasheet), updates
have to done in stmfx_pinconf_set function:

-"type" has to be set when "bias" is configured as "pull-up or pull-down"
-PIN_CONFIG_DRIVE_PUSH_PULL should only be used when gpio is configured as
 output. There is so no need to check direction.

DIR | TYPE | PUPD | MFX GPIO configuration
----|------|------|---------------------------------------------------
1   | 1    | 1    | OUTPUT open drain with internal pull-up resistor
----|------|------|---------------------------------------------------
1   | 1    | 0    | OUTPUT open drain with internal pull-down resistor
----|------|------|---------------------------------------------------
1   | 0    | 0/1  | OUTPUT push pull no pull
----|------|------|---------------------------------------------------
0   | 1    | 1    | INPUT with internal pull-up resistor
----|------|------|---------------------------------------------------
0   | 1    | 0    | INPUT with internal pull-down resistor
----|------|------|---------------------------------------------------
0   | 0    | 1    | INPUT floating
----|------|------|---------------------------------------------------
0   | 0    | 0    | analog (GPIO not used, default setting)

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/1564053416-32192-1-git-send-email-amelie.delaunay@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:14:30 +02:00
Baolin Wang
2f22e2028c pinctrl: sprd: Combine the condition of MISC_PIN and COMMON_PIN
Since the follow-up pin design on Spreadtrum platform has some changes,
some configuration of MISC_PIN moved to COMMON_PIN. To support current
pin design and keep backward compatibility, we should combine the
condition of MISC_PIN and COMMON_PIN to configure an individual pin.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/17af5e761e0515d288a7ea4078ac9aa4a82a7a4e.1564048446.git.baolin.wang@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:13:18 +02:00
Baolin Wang
e89febc75d pinctrl: sprd: Change to use devm_platform_ioremap_resource()
The devm_platform_ioremap_resource() function wraps platform_get_resource()
and devm_ioremap_resource() in a single helper, thus use it to simplify
the code.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/ff410d312ed0047b5a36e5113daf7df78bcf1aa8.1564048446.git.baolin.wang@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:12:32 +02:00
Mark Brown
2f8f180b3c arm64: Remove unused cpucap_multi_entry_cap_cpu_enable()
The function cpucap_multi_entry_cap_cpu_enable() is unused, remove it to
avoid any confusion reading the code and potential for bit rot.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:34 +01:00
Will Deacon
73961dc118 arm64: sysreg: Remove unused and rotting SCTLR_ELx field definitions
Our SCTLR_ELx field definitions are somewhat over-engineered in that
they carefully define masks describing the RES0/RES1 bits and then use
these to construct further masks representing bits to be set/cleared for
the _EL1 and _EL2 registers.

However, most of the resulting definitions aren't actually used by
anybody and have subsequently started to bit-rot when new fields have
been added by the architecture, resulting in fields being part of the
RES0 mask despite being defined and used elsewhere.

Rather than fix up these masks, simply remove the unused parts entirely
so that we can drop the maintenance burden. We can always add things
back if we need them in the future.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:34 +01:00
Will Deacon
332e5281a4 arm64: esr: Add ESR exception class encoding for trapped ERET
The ESR.EC encoding of 0b011010 (0x1a) describes an exception generated
by an ERET, ERETAA or ERETAB instruction as a result of a nested
virtualisation trap to EL2.

Add an encoding for this EC and a string description so that we identify
it correctly if we take one unexpectedly.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:34 +01:00
Chuhong Yuan
b3e089cd44 arm64: Replace strncmp with str_has_prefix
In commit b6b2735514
("tracing: Use str_has_prefix() instead of using fixed sizes")
the newly introduced str_has_prefix() was used
to replace error-prone strncmp(str, const, len).
Here fix codes with the same pattern.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:34 +01:00
Lorenzo Pieralisi
3e77eeb7a2 ACPI/IORT: Rename arm_smmu_v3_set_proximity() 'node' local variable
Commit 36a2ba0775 ("ACPI/IORT: Reject platform device creation on NUMA
node mapping failure") introduced a local variable 'node' in
arm_smmu_v3_set_proximity() that shadows the struct acpi_iort_node
pointer function parameter.

Execution was unaffected but it is prone to errors and can lead
to subtle bugs.

Rename the local variable to prevent any issue.

Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:34 +01:00
Masahiro Yamada
b717480f54 arm64: remove unneeded uapi/asm/stat.h
stat.h is listed in include/uapi/asm-generic/Kbuild, so Kbuild will
automatically generate it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:34 +01:00
Bhupesh Sharma
c19d050f80 arm64/kexec: Use consistent convention of initializing 'kxec_buf.mem' with KEXEC_BUF_MEM_UNKNOWN
With commit b6664ba42f ("s390, kexec_file: drop arch_kexec_mem_walk()"),
we introduced the KEXEC_BUF_MEM_UNKNOWN macro. If kexec_buf.mem is set
to this value, kexec_locate_mem_hole() will try to allocate free memory.

While other arch(s) like s390 and x86_64 already use this macro to
initialize kexec_buf.mem with, arm64 uses an equivalent value of 0.
Replace it with KEXEC_BUF_MEM_UNKNOWN, to keep the convention of
initializing 'kxec_buf.mem' consistent across various archs.

Cc: takahiro.akashi@linaro.org
Cc: james.morse@arm.com
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:33 +01:00
Mark Rutland
b907b80d7a arm64: remove pointless __KERNEL__ guards
For a number of years, UAPI headers have been split from kernel-internal
headers. The latter are never exposed to userspace, and always built
with __KERNEL__ defined.

Most headers under arch/arm64 don't have __KERNEL__ guards, but there
are a few stragglers lying around. To make things more consistent, and
to set a good example going forward, let's remove these redundant
__KERNEL__ guards.

In a couple of cases, a trailing #endif lacked a comment describing its
corresponding #if or #ifdef, so these are fixes up at the same time.

Guards in auto-generated crypto code are left as-is, as these guards are
generated by scripting imported from the upstream openssl project
scripts. Guards in UAPI headers are left as-is, as these can be included
by userspace or the kernel.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:33 +01:00
Julien Thierry
c87857945b arm64: Remove unused assembly macro
As of commit 4141c857fd ("arm64: convert
raw syscall invocation to C"), moving syscall handling from assembly to
C, the macro mask_nospec64 is no longer referenced.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:33 +01:00
Kalesh Singh
2c8db5bef9 PM/sleep: Expose suspend stats in sysfs
Userspace can get suspend stats from the suspend stats debugfs node.
Since debugfs doesn't have stable ABI, expose suspend stats in
sysfs under /sys/power/suspend_stats.

Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-05 12:03:18 +02:00
Andy Shevchenko
db5b44f82a pinctrl: qdf2xxx: Switch to use device_property_count_uXX()
Use use device_property_count_uXX() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723192738.68486-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 12:01:45 +02:00
Andy Shevchenko
720b8ec676 pinctrl: msm: Switch to use device_property_count_uXX()
Use use device_property_count_uXX() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723192738.68486-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:55:41 +02:00
Andy Shevchenko
bb100b6476 ACPI / APEI: Get rid of NULL_UUID_LE constant
This is a missed part of the commit 5b53696a30
("ACPI / APEI: Switch to use new generic UUID API"), i.e.
replacing old definition with a global constant variable.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-05 11:49:55 +02:00
Charles Keepax
a1db8da7c2 pinctrl: madera: Add configuration for Cirrus Logic CS47L92
This adds the pinctrl configuration for the CS47L92 codec to
the madera pinctrl driver.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722091015.20884-3-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:48:03 +02:00
Richard Fitzgerald
b0bca3e4ee pinctrl: madera: Add configuration for Cirrus Logic CS47L15
This adds the pinctrl configuration for the CS47L15 codec to
the madera pinctrl driver.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722091015.20884-2-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:47:14 +02:00
Charles Keepax
f134b85177 pinctrl: madera: Use local copy of pdata
A local copy of the pdata exists and it should be used rather than
pulling a fresh copy.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722091015.20884-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:46:25 +02:00
Charles Keepax
74d2d0e687 gpio: madera: Add support for Cirrus Logic CS47L92
As the gpio is common to all madera codecs all that is needed
is to setup the correct number of GPIO pins for the CS47L92.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722090748.20807-4-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:45:24 +02:00
Richard Fitzgerald
d06be8bc29 gpio: madera: Add support for Cirrus Logic CS47L15
As the gpio is common to all madera codecs all that is needed
is to setup the correct number of GPIO pins for the CS47L15.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722090748.20807-3-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:44:15 +02:00
Charles Keepax
fe2afa0d7b gpio: madera: Use local copy of pdata
A local copy of the pdata exists and it should be used rather than
pulling a fresh copy.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722090748.20807-2-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:43:20 +02:00
Charles Keepax
72ce665f17 gpio: arizona: Use local copy of pdata
A local copy of the pdata exists and it should be used rather than
pulling a fresh copy.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722090748.20807-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:42:29 +02:00
Stefan Wahren
e38a9a437f pinctrl: bcm2835: Add support for BCM2711 pull-up functionality
The BCM2711 has a new way of selecting the pull-up/pull-down setting
for a GPIO pin. The registers used for the BCM2835, GP_PUD and
GP_PUDCLKn0, are no longer connected. A new set of registers,
GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add
a new compatible string "brcm,bcm2711-gpio" and the kernel
driver will use it to select which method is used to select
pull-up/pull-down.

This patch based on a patch by Al Cooper which was intended for the
BCM7211. This is a bugfixed and improved version.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/1563776607-8368-3-git-send-email-wahrenst@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:35:41 +02:00
Florian Westphal
589b474a4b netfilter: nf_flow_table: fix offload for flows that are subject to xfrm
This makes the previously added 'encap test' pass.
Because its possible that the xfrm dst entry becomes stale while such
a flow is offloaded, we need to call dst_check() -- the notifier that
handles this for non-tunneled traffic isn't sufficient, because SA or
or policies might have changed.

If dst becomes stale the flow offload entry will be tagged for teardown
and packets will be passed to 'classic' forwarding path.

Removing the entry right away is problematic, as this would
introduce a race condition with the gc worker.

In case flow is long-lived, it could eventually be offloaded again
once the gc worker removes the entry from the flow table.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-05 11:29:50 +02:00
Florian Westphal
0ca1bbb7f4 selftests: netfilter: extend flowtable test script for ipsec
'flow offload' expression should not offload flows that will be subject
to ipsec, but it does.

This results in a connectivity blackhole for the affected flows -- first
packets will go through (offload happens after established state is
reached), but all remaining ones bypass ipsec encryption and are thus
discarded by the peer.

This can be worked around by adding "rt ipsec exists accept"
before the 'flow offload' rule matches.

This test case will fail, support for such flows is added in
next patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-05 11:29:50 +02:00
Stefan Wahren
9cd6237d66 pinctrl: bcm2835: Add brcm,bcm2711 compatible
Add a new compatible for the BCM2711.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/1563776607-8368-2-git-send-email-wahrenst@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:29:21 +02:00
Hennie Muller
d111e7a387 gpio: viperboard: Replace 'unsigned' with 'unsigned int'
Fixes a couple of warnings by checkpatch and sparse.

Signed-off-by: Hennie Muller <hm@bitlabs.co.za>
Link: https://lore.kernel.org/r/20190721125259.13990-1-hm@bitlabs.co.za
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:26:58 +02:00
Sowjanya Komatineni
6c172af579 pinctrl: tegra210: Add Tegra210 pinctrl pm ops
This patch adds suspend and resume functionality to Tegra210 pinctrl.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1564607463-28802-3-git-send-email-skomatineni@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:21:28 +02:00
Sowjanya Komatineni
9870acd374 pinctrl: tegra: Add suspend and resume support
This patch adds support for Tegra pinctrl driver suspend and resume.

During suspend, context of all pinctrl registers are stored and
on resume they are all restored to have all the pinmux and pad
configuration for normal operation.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1564607463-28802-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:19:35 +02:00
Masahiro Yamada
3d6ade0abf pinctrl: pinctrl-single: add header include guard
Add a header include guard just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190720115858.7015-1-yamada.masahiro@socionext.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 11:08:55 +02:00
Rafael J. Wysocki
cab09f3d2d cpuidle: teo: Allow tick to be stopped if PM QoS is used
The TEO goveror prevents the scheduler tick from being stopped (unless
stopped already) if there is a PM QoS latency constraint for the given
CPU and the target residency of the deepest idle state matching that
constraint is below the tick boundary.

However, that is problematic if CPUs with PM QoS latency constraints
are idle for long times, because it effectively causes the tick to
run on them all the time which is wasteful.  [It is also confusing
and questionable if they are full dynticks CPUs.]

To address that issue, modify the TEO governor to carry out the
entire search for the most suitable idle state (from the target
residency perspective) even if a latency constraint is present,
to allow it to determine the expected idle duration in all cases.

Also, when using the last several measured idle duration values
to refine the idle state selection, make it compare those values
with the current expected idle duration value (instead of
comparing them with the target residency of the idle state
selected so far) which should prevent the tick from being
retained when it makes sense to stop it sometimes (especially
in the presence of PM QoS latency constraints).

Fixes: b26bf6ab71 ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-05 11:02:44 +02:00
Rafael J. Wysocki
32b91ca153 cpuidle: menu: Allow tick to be stopped if PM QoS is used
After commit 554c8aa8ec ("sched: idle: Select idle state before
stopping the tick") the menu governor prevents the scheduler tick from
being stopped (unless stopped already) if there is a PM QoS latency
constraint for the given CPU and the target residency of the deepest
idle state matching that constraint is below the tick boundary.

However, that is problematic if CPUs with PM QoS latency constraints
are idle for long times, because it effectively causes the tick to
run on them all the time which is wasteful.  [It is also confusing
and questionable if they are full dynticks CPUs.]

To address that issue, make the menu governor allow the tick to be
stopped only if the idle duration predicted by it is beyond the tick
boundary, except when the shallowest idle state is selected upfront
and it is not a "polling" one.

Fixes: 554c8aa8ec ("sched: idle: Select idle state before stopping the tick")
Link: https://lore.kernel.org/lkml/79b247b3-e056-610e-9a07-e685dfdaa6c9@gmail.com/
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-05 11:02:44 +02:00
Ulf Hansson
0d1e16c640 PM / Domains: Align in-parameter names for some genpd functions
Align in-parameter names for the declarations of pm_genpd_add|
remove_subdomain() and of_genpd_add_subdomain() according to their
implementations, as to improve consistency.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-05 10:58:19 +02:00
Leonardo Bras
9616dda1aa powerpc/pseries/hotplug-memory.c: Replace nested ifs by switch-case
I noticed these nested ifs can be easily replaced by switch-cases,
which can improve readability.

Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190801225251.17864-1-leonardo@linux.ibm.com
2019-08-05 18:53:04 +10:00
Jordan Niethe
1ebe0dcce1 powerpc/xive: Update comment referencing magic loads from an ESB
The comment above xive_esb_read() references magic loads from an ESB as
described xive.h. This has been inaccurate since commit 12c1f339cd
("powerpc/xive: Move definition of ESB bits") which moved the
description. Update the comment to reference the new location of the
description in xive-regs.h

Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Acked-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802000835.26191-1-jniethe5@gmail.com
2019-08-05 18:53:04 +10:00
Christophe Leroy
461cef2a67 powerpc/32: activate ARCH_HAS_PMEM_API and ARCH_HAS_UACCESS_FLUSHCACHE
PPC32 also have flush_dcache_range() so it can also support
ARCH_HAS_PMEM_API and ARCH_HAS_UACCESS_FLUSHCACHE without changes.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a682a2f9db308c5cfe77e45aa3352e41bc9f4e33.1564554634.git.christophe.leroy@c-s.fr
2019-08-05 18:53:04 +10:00
Andrew Donnellan
e7de4f7b64 powerpc/powernv: Restrict OPAL symbol map to only be readable by root
Currently the OPAL symbol map is globally readable, which seems bad as
it contains physical addresses.

Restrict it to root.

Fixes: c8742f8512 ("powerpc/powernv: Expose OPAL firmware symbol map")
Cc: stable@vger.kernel.org # v3.19+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190503075253.22798-1-ajd@linux.ibm.com
2019-08-05 18:53:04 +10:00
Andrew Donnellan
8b856a0942 powerpc/configs: Disable SCOM_DEBUGFS in powernv_defconfig
SCOM_DEBUGFS is really not needed for anything other than low-level
hardware debugging.

mpe: It also introduces a large and poorly documented/understood
attack surface. Although the interface is only available to root, the
kernel still aspires to restrict root to accessing hardware through
well defined interfaces, which this is not.

opal-prd uses its own interface (/dev/prd) for SCOM access, so it
doesn't need SCOM_DEBUGFS.

At some point in the future we'll introduce a debug config fragment
where this can go instead.

Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-5-ajd@linux.ibm.com
2019-08-05 18:53:04 +10:00
Andrew Donnellan
8c98db8d58 powerpc/powernv: Fix checkpatch warnings in opal-xscom.c
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-4-ajd@linux.ibm.com
2019-08-05 18:53:03 +10:00
Andrew Donnellan
bfd2f0d49a powerpc/powernv: Get rid of old scom_controller abstraction
Once upon a time, the SCOM access code was used by the WSP platform as
well as powernv. Thus it made sense to have a generic SCOM access
interface to abstract between different platforms.

Now that it's just powernv, with no other platforms currently on the
horizon, let's rip out scom_controller and make everything much
simpler and more direct.

While we're here, fix up the comment block at the top.

Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-3-ajd@linux.ibm.com
2019-08-05 18:53:03 +10:00
Andrew Donnellan
9edc6b919d powerpc/powernv: Remove dead SCOM access code
Nothing is using scom_map_device() or scom_find_parent(). Remove them.

Also don't export scom_controller, there are no other users of it.

Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-2-ajd@linux.ibm.com
2019-08-05 18:53:03 +10:00
Andrew Donnellan
08a456aa64 powerpc/powernv: Move SCOM access code into powernv platform
The powernv platform is the only one that directly accesses SCOMs.
Move the support code to platforms/powernv, and get rid of the
PPC_SCOM Kconfig option, as SCOM support is always selected when
compiling for powernv.

This also means that the Kconfig item for CONFIG_SCOM_DEBUGFS will
show up in menuconfig in the platform menu, rather than at the root,
which is a much better location.

Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-1-ajd@linux.ibm.com
2019-08-05 18:53:03 +10:00