Commit graph

982,081 commits

Author SHA1 Message Date
Sven Eckelmann
60ad72da55 mac80211: implement HE support for mesh
Implement the basics required for supporting high efficiency with mesh:
include HE information elements in beacons, probe responses, and peering
action frames, and check for compatible HE configurations when peering.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>

Forwarded: https://patchwork.kernel.org/patch/11029299/
Link: https://lore.kernel.org/r/20190724163359.3507-2-sven@narfation.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 16:14:12 +02:00
Lorenzo Bianconi
a0b4496a43 mac80211: add IEEE80211_KEY_FLAG_GENERATE_MMIE to ieee80211_key_flags
Add IEEE80211_KEY_FLAG_GENERATE_MMIE flag to ieee80211_key_flags in order
to allow the driver to notify mac80211 to generate MMIE and that it
requires sequence number generation only.
This is a preliminary patch to add BIP_CMAC_128 hw support to mt7615
driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/dfe275f9aa0f1cc6b33085f9efd5d8447f68ad13.1563228405.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 16:14:12 +02:00
John Crispin
ef11a931bd mac80211: HE: add Spatial Reuse element parsing support
Add support to mac80211 for parsing SPR elements as per
P802.11ax_D4.0 section 9.4.2.241.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190618061915.7102-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 16:14:12 +02:00
John Crispin
3d07ffcaf3 mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header
Add support to ieee80211_add_tx_radiotap_header() for handling rates
reported via ieee80211_tx_status. This allows us to also report HE rates.

Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190714154419.11854-4-john@phrozen.org
[remove text about 60 GHz, mac80211 doesn't support it, fix endianness issue]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 16:14:06 +02:00
Chris Wilson
5cca503817 drm/i915/perf: Initialise err to 0 before looping over ce->engines
Smatch warning that the loop may be empty causing us to check err before
it had been set. Ensure that it is initialised to 0, just in case.

v2: Refactor the inner loop for better scooping and clarity

Fixes: a9877da2d6 ("drm/i915/oa: Reconfigure contexts on the fly")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726131458.8310-1-chris@chris-wilson.co.uk
2019-07-26 15:10:53 +01:00
Christoph Hellwig
d45d464b11 mm/hmm: merge hmm_range_snapshot into hmm_range_fault
Add a HMM_FAULT_SNAPSHOT flag so that hmm_range_snapshot can be merged
into the almost identical hmm_range_fault function.

Link: https://lore.kernel.org/r/20190726005650.2566-5-rcampbell@nvidia.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Christoph Hellwig
9a4903e49e mm/hmm: replace the block argument to hmm_range_fault with a flags value
This allows easier expansion to other flags, and also makes the callers a
little easier to read.

Link: https://lore.kernel.org/r/20190726005650.2566-4-rcampbell@nvidia.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Ralph Campbell
d2e8d55116 mm/hmm: a few more C style and comment clean ups
A few more comments and minor programming style clean ups.  There should
be no functional changes.

Link: https://lore.kernel.org/r/20190726005650.2566-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Ralph Campbell
1f96180792 mm/hmm: replace hmm_update with mmu_notifier_range
The hmm_mirror_ops callback function sync_cpu_device_pagetables() passes a
struct hmm_update which is a simplified version of struct
mmu_notifier_range. This is unnecessary so replace hmm_update with
mmu_notifier_range directly.

Link: https://lore.kernel.org/r/20190726005650.2566-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
[jgg: white space tuning]
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Wen Yang
b5fa9fc9e8 irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe()
The gic_node is still being used in the rza1_irqc_parse_map() call
after the of_node_put() call, which may result in use-after-free.

Fixes: a644ccb819 ("irqchip: Add Renesas RZ/A1 Interrupt Controller driver")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-26 14:40:01 +01:00
Lucas Stach
9a446ef08f irqchip/irq-imx-gpcv2: Forward irq type to parent
The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-26 14:38:46 +01:00
Nishka Dasgupta
321275f0d8 irqchip/irq-mbigen: Add of_node_put() before return
Each iteration of for_each_child_of_node puts the previous node, but
in the case of a return from the middle of the loop, there is no put,
thus causing a memory leak. Add an of_node_put before the return in
three places.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-26 14:27:22 +01:00
Nianyao Tang
34f8eb92ca irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail
In its_vpe_init, when its_alloc_vpe_table fails, we should free
vpt_page allocated just before, instead of vpe->vpt_page.
Let's fix it.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-26 14:27:21 +01:00
Anders Roxell
52f8c8b32e irqchip/gic-v3: Mark expected switch fall-through
When fall-through warnings was enabled by default the following warning
was starting to show up:

In file included from ../arch/arm64/include/asm/cputype.h:132,
                 from ../arch/arm64/include/asm/cache.h:8,
                 from ../include/linux/cache.h:6,
                 from ../include/linux/printk.h:9,
                 from ../include/linux/kernel.h:15,
                 from ../include/linux/list.h:9,
                 from ../include/linux/kobject.h:19,
                 from ../include/linux/of.h:17,
                 from ../include/linux/irqdomain.h:35,
                 from ../include/linux/acpi.h:13,
                 from ../drivers/irqchip/irq-gic-v3.c:9:
../drivers/irqchip/irq-gic-v3.c: In function ‘gic_cpu_sys_reg_init’:
../arch/arm64/include/asm/sysreg.h:853:2: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
  asm volatile(__msr_s(r, "%x0") : : "rZ" (__val));  \
  ^~~
../arch/arm64/include/asm/arch_gicv3.h:20:29: note: in expansion of macro ‘write_sysreg_s’
 #define write_gicreg(v, r)  write_sysreg_s(v, SYS_ ## r)
                             ^~~~~~~~~~~~~~
../drivers/irqchip/irq-gic-v3.c:773:4: note: in expansion of macro ‘write_gicreg’
    write_gicreg(0, ICC_AP0R2_EL1);
    ^~~~~~~~~~~~
../drivers/irqchip/irq-gic-v3.c:774:3: note: here
   case 6:
   ^~~~

Rework so that the compiler doesn't warn about fall-through.

Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-26 14:27:02 +01:00
Jia-Ju Bai
2127c01b7f ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls()
In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
    if (! ak->adc_info ||
        ! ak->adc_info[mixer_ch].switch_name)

When ak->adc_info is NULL, it is used on line 792:
    knew.name = ak->adc_info[mixer_ch].selector_name;

Thus, a possible null-pointer dereference may occur.

To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-26 14:25:37 +02:00
Takashi Iwai
dd65f7e19c ALSA: hda - Show the fatal CORB/RIRB error more clearly
The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up.  Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.

Also, show the bus-reset fallback also as an error, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-26 14:24:55 +02:00
Jeffrey Hugo
cd5e1cbe1f drm/panel: simple: Add support for Sharp LD-D5116Z01B panel
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708165811.46370-1-jeffrey.l.hugo@gmail.com
2019-07-26 14:16:48 +02:00
Mauro Carvalho Chehab
d8481155a3
ASoC: sunxi: fix a sound binding broken reference
Address this rename:
	Documentation/devicetree/bindings/sound/{sun4i-i2s.txt -> allwinner,sun4i-a10-i2s.yaml}

Fixes: 0a0ca8e94c ("dt-bindings: sound: Convert Allwinner I2S binding to YAML")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/9932608f32030c886d906ea656eda8408c544776.1564140865.git.mchehab+samsung@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 13:11:29 +01:00
Peter Ujfalusi
2448c813b1
ASoC: ti: davinci-mcasp: Support for correct symmetric sample bits
Implement custom snd_pcm_hw_rule to filter the available formats for the
second stream to make it symmetric and allow only formats which require
the same amount of bits on the bus as the running stream.

A simple constraint is not working correctly because for example:
the first stream is started with S24_LE

If we place 24 as constraint for the SAMPLE_BITS then the second stream
can not use S24_LE as it is physically 32bits.

If we would place 32 as constraint (physical width) then S32_LE would have
been allowed, but S24_3LE is not.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 13:10:54 +01:00
Mark Brown
3b46a67af2
Merge branch 'asoc-5.3' into asoc-5.4 2019-07-26 13:10:09 +01:00
Peter Ujfalusi
1e112c35e3
ASoC: ti: davinci-mcasp: Correct slot_width posed constraint
The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.

Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.

With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.

Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 13:09:32 +01:00
Cheng-Yi Chiang
789e162a62
ASoC: rockchip: Fix mono capture
This reverts commit db51707b9c.
Revert "ASoC: rockchip: i2s: Support mono capture"

Previous discussion in

https://patchwork.kernel.org/patch/10147153/

explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.

Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 13:09:31 +01:00
Christophe JAILLET
e51b69808b
ASoC: Intel: Fix some acpi vs apci typo in somme comments
Fix some typo to have the filaname given in a comment match the real name
of the file.
Some 'acpi' have erroneously been written 'apci'

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 13:09:30 +01:00
Peter Ujfalusi
34a2a80ff3
ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode
When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.

In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.

This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.

Fixes: ca3d943334 ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 13:09:09 +01:00
Hook, Gary
2a03e3a50a crypto: ccp - Include the module name in system log messages
Redefine pr_fmt so that the module name is prefixed to every
log message produced by the ccp-crypto module

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:06 +10:00
Herbert Xu
4f22f32356 crypto: Remove orphan tools/crypto directory
The directory tools/crypto and the only file under it never gets
built anywhere.  This program should instead be incorporated into
one of the existing user-space projects, crconf or libkcapi.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:05 +10:00
Phani Kiran Hemadri
a7268c4d42 crypto: cavium/nitrox - Add support for loading asymmetric crypto firmware
This patch adds support to load Asymmetric crypto firmware on
AE cores of CNN55XX device. Firmware is stored on UCD block 2
and all available AE cores are tagged to group 0.

Signed-off-by: Phani Kiran Hemadri <phemadri@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:05 +10:00
Hook, Gary
a7c2647034 crypto: ccp - Add a module parameter to control registration for DMA
The CCP driver is able to act as a DMA engine. Add a module parameter that
allows this feature to be enabled/disabled.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:04 +10:00
Hook, Gary
90773bc1ab crypto: ccp - module parameter to limit the number of enabled CCPs
Provide the ability to constrain the total number of enabled devices in
the system. Once max_devs devices have been configured, subsequently
probed devices are ignored.

The max_devs parameter may be zero, in which case all CCPs are disabled.
PSPs are always enabled and active.

Disabling the CCPs also disables DMA and RNG registration.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:04 +10:00
Hook, Gary
c4a8927908 crypto: ccp - Add a module parameter to specify a queue count
Add a module parameter to limit the number of queues per CCP. The default
value (nqueues=0) is to set up every available queue on each device.

The count of queues starts from the first one found on the device (which
varies based on the device ID).

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:03 +10:00
Hook, Gary
93308baf07 crypto: ccp - Make CCP debugfs support optional
Add a config option to exclude DebugFS support in the CCP driver.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:03 +10:00
Ondrej Mosnacek
91b05a7e7d crypto: user - make NETLINK_CRYPTO work inside netns
Currently, NETLINK_CRYPTO works only in the init network namespace. It
doesn't make much sense to cut it out of the other network namespaces,
so do the minor plumbing work necessary to make it work in any network
namespace. Code inspired by net/core/sock_diag.c.

Tested using kcapi-dgst from libkcapi [1]:
Before:
    # unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
    libkcapi - Error: Netlink error: sendmsg failed
    libkcapi - Error: Netlink error: sendmsg failed
    libkcapi - Error: NETLINK_CRYPTO: cannot obtain cipher information for hmac(sha512) (is required crypto_user.c patch missing? see documentation)
    0

After:
    # unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
    32

[1] https://github.com/smuellerDD/libkcapi

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:02 +10:00
Pascal van Leeuwen
31fb084c4e crypto: inside-secure -reduce hash byte counters to 64 bits
This patch recognises the fact that the hardware cannot ever process more
than 2,199,023,386,111 bytes of hash or HMAC payload, so there is no point
in maintaining 128 bit wide byte counters, 64 bits is more than sufficient

Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:01 +10:00
Pascal van Leeuwen
0e17e3621a crypto: inside-secure - add support for authenc(hmac(sha*),rfc3686(ctr(aes))) suites
This patch adds support for the following AEAD ciphersuites:
- authenc(hmac(sha1),rfc3686(ctr(aes)))
- authenc(hmac(sha224),rfc3686(ctr(aes)))
- authenc(hmac(sha256),rfc3686(ctr(aes)))
- authenc(hmac(sha384),rfc3686(ctr(aes)))
- authenc(hmac(sha512),rfc3686(ctr(aes)))

Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:01 +10:00
Pascal van Leeuwen
54f9e8fa66 crypto: inside-secure - added support for rfc3686(ctr(aes))
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26 22:08:00 +10:00
Al Viro
19a1c4092e fix the struct mount leak in umount_tree()
We need to drop everything we remove from the tree, whether
mnt_has_parent() is true or not.  Usually the bug manifests as a slow
memory leak (leaked struct mount for initramfs); it becomes much more
visible in mount_subtree() users, such as btrfs.  There we leak
a struct mount for btrfs superblock being mounted, which prevents
fs shutdown on subsequent umount.

Fixes: 56cbb429d9 ("switch the remnants of releasing the mountpoint away from fs_pin")
Reported-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-26 07:59:06 -04:00
Manikanta Pubbisetty
e6f4051123 {nl,mac}80211: fix interface combinations on crypto controlled devices
Commit 33d915d9e8 ("{nl,mac}80211: allow 4addr AP operation on
crypto controlled devices") has introduced a change which allows
4addr operation on crypto controlled devices (ex: ath10k). This
change has inadvertently impacted the interface combinations logic
on such devices.

General rule is that software interfaces like AP/VLAN should not be
listed under supported interface combinations and should not be
considered during validation of these combinations; because of the
aforementioned change, AP/VLAN interfaces(if present) will be checked
against interfaces supported by the device and blocks valid interface
combinations.

Consider a case where an AP and AP/VLAN are up and running; when a
second AP device is brought up on the same physical device, this AP
will be checked against the AP/VLAN interface (which will not be
part of supported interface combinations of the device) and blocks
second AP to come up.

Add a new API cfg80211_iftype_allowed() to fix the problem, this
API works for all devices with/without SW crypto control.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Fixes: 33d915d9e8 ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices")
Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 13:50:43 +02:00
Jeffrey Hugo
85266d7515 dt-bindings: panel: Add Sharp LD-D5116Z01B
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708165753.46275-1-jeffrey.l.hugo@gmail.com
2019-07-26 13:50:14 +02:00
Michael S. Tsirkin
73f628ec9e vhost: disable metadata prefetch optimization
This seems to cause guest and host memory corruption.
Disable for now until we get a better handle on that.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-26 07:49:29 -04:00
Navid Emamdoost
afd6d4f5a5 drm/panel: check failure cases in the probe func
The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port

Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.com
2019-07-26 13:44:42 +02:00
Linus Walleij
e8547e12d5 ARM: dts: gemini: Mount root from mtdblock3
The third mtdblock device named "Application" is where we
want to mount our root filesystem.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-26 13:42:57 +02:00
Linus Walleij
b5a923f8c7 ARM: dts: gemini: Switch to redboot partition parsing
This switches the kernel to parse the Redboot partitions
in the SL93512r and the NAS4220B properly using the
right compatible string instead of using hard-coded
partitions.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-26 13:42:57 +02:00
Linus Walleij
47ef78b099 ARM: dts: gemini: Fix up confused pin settings
The SL93512r board has its pin muxing set up for the wrong
ASIC: SL3516 instead of SL3512 that it is using. Fix it
up and reference the right GPIO for the WPS button.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-26 13:42:57 +02:00
John Crispin
b7b2e8caa0 mac80211: propagate struct ieee80211_tx_status into ieee80211_tx_monitor()
This will allow use to report HE rates on the radiotap interface.

Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190714154419.11854-3-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 13:41:45 +02:00
John Crispin
cbe77dde47 mac80211: add xmit rate to struct ieee80211_tx_status
Right now struct ieee80211_tx_rate cannot hold HE rates. Lets use
struct ieee80211_tx_status instead. This will also make the code
future-proof for when we have EHT.

Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190714154419.11854-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 13:41:45 +02:00
Farhan Ali
98abe02278 MAINTAINERS: vfio-ccw: Remove myself as the maintainer
I will not be able to continue with my maintainership responsibilities
going forward, so remove myself as the maintainer.

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26 13:36:26 +02:00
Vasily Gorbik
ac7a0fcea3 s390/mm: use shared variables for sysctl range check
Since commit eec4844fae ("proc/sysctl: add shared variables for range
check") special shared variables are available for sysctl range check.
Reuse them for /proc/sys/vm/allocate_pgste proc handler.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26 13:36:22 +02:00
Halil Pasic
4f419eb142 virtio/s390: fix race on airq_areas[]
The access to airq_areas was racy ever since the adapter interrupts got
introduced to virtio-ccw, but since commit 39c7dcb158 ("virtio/s390:
make airq summary indicators DMA") this became an issue in practice as
well. Namely before that commit the airq_info that got overwritten was
still functional. After that commit however the two infos share a
summary_indicator, which aggravates the situation. Which means
auto-online mechanism occasionally hangs the boot with virtio_blk.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 96b14536d9 ("virtio-ccw: virtio-ccw adapter interrupt support.")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26 13:36:18 +02:00
Halil Pasic
1a2dcff881 s390/dma: provide proper ARCH_ZONE_DMA_BITS value
On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits.
The current value is 24 and makes __dma_direct_alloc_pages() take a
wrong turn first (but __dma_direct_alloc_pages() recovers then).

Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Fixes: c61e963734 ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-26 13:36:12 +02:00
John Crispin
2aa485e114 mac80211: add support for parsing ADDBA_EXT IEs
ADDBA_EXT IEs can be used to negotiate the BA fragmentation level.

Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190713163642.18491-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26 13:32:07 +02:00