This patch improves few aspects of rtl_rx, no functional change intended.
1. inline rtl8169_try_rx_copy
2. make pkt_size unsigned
3. use constant ETH_FCS_LEN instead of value 4
4. We just created the skb, so we don't need the checks in skb_put.
Also we don't need the return value of skb_put.
Set skb->tail and skb->len directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu says:
====================
net: stmmac: Two fixes
Two fixes targeting -net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We need the memory to be zeroed upon allocation so use kcalloc()
instead.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RX Descriptors are being cleaned after setting the buffers which may
lead to buffer addresses being wiped out.
Fix this by clearing earlier the RX Descriptors.
Fixes: 2af6106ae9 ("net: stmmac: Introducing support for Page Pool")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit(net: phy: marvell: change default m88e1510 LED configuration),
the active LED of Hip07 devices is always off, because Hip07 just
use 2 LEDs.
This patch adds a phy_register_fixup_for_uid() for m88e1510 to
correct the LED configuration.
Fixes: 077772468e ("net: phy: marvell: change default m88e1510 LED configuration")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Reviewed-by: linyunsheng <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up
event. This can cause the link to be stuck low when there's traffic on
the interface, so disable this feature.
Fixes: 4bb0432628 ("net: mvpp2: phylink support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the initial DT for the Asus NovaGo TP370QL laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds the initial DT for the HP Envy x2 laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds the initial DT for the Lenovo Miix 630 laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There are some questionable coding styles in this function. It looks
quite odd to deref a pointer with array indexing that only uses the
first element. Also, destroying an input/output variable halfway through
the function and then overwriting it on success is not clear. It's
better to use a local variable and the kernel macros to step through
each bit set in a bitmask and clearly show where outputs are set.
Cc: Ian Jackson <ian.jackson@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Changed for_each_set_bit() size to BITS_PER_LONG]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Trust that we now have adequate protection over the low level structures
via the engine->active.lock to allow ourselves to capture the GPU error
state without the heavy hammer of stop_machine(). Sadly this does mean
that we have to forgo some of the lesser used information (not derived
from the active state) that is not controlled by the active locks. This
includes the list of buffers in the ppGTT and pinned globally in the
GGTT. Originally this was used to manually verify relocations, but
hasn't been required for sometime and modern mesa now has the habit of
ensuring that all interesting buffers within a batch are captured in their
entirety (that are the auxiliary state buffers, but not the textures).
A useful side-effect is that this allows us to restore error capturing
for Braswell and Broxton.
v2: Use pagevec for a typical arbitrary number of preallocated pages
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722222847.24178-1-chris@chris-wilson.co.uk
Prior to freeing the struct, call the fini function to cleanup the
common members. Currently this only calls the debug functions to mark
the structs as destroyed, but may be extended to real work in future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-2-chris@chris-wilson.co.uk
Remove the outer layer cleanup of engine stubs; as i915_drv itself no
longer tries to preallocate and so is not responsible for either the
allocation or free. By the time we call the cleanup function, we already
have cleaned up the engines.
v2: Lack of symmetry between mmio_probe and mmio_release for handling
the error cleanup. engine->destroy() is a compound function that is
called earlier in the normal release as it ties together other bits of
state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-6-chris@chris-wilson.co.uk
The module reset code in the Renesas CPG/MSSR driver uses
read-modify-write (RMW) operations to write to a Software Reset Register
(SRCRn), and simple writes to write to a Software Reset Clearing
Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware
User's Manuals.
However, this may cause a race condition when two devices are reset in
parallel: if the reset for device A completes in the middle of the RMW
operation for device B, device A may be reset again, causing subtle
failures (e.g. i2c timeouts):
thread A thread B
-------- --------
val = SRCRn
val |= bit A
SRCRn = val
delay
val = SRCRn (bit A is set)
SRSTCLRn = bit A
(bit A in SRCRn is cleared)
val |= bit B
SRCRn = val (bit A and B are set)
This can be reproduced on e.g. Salvator-XS using:
$ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done &
$ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done &
i2c-rcar e6510000.i2c: error -110 : 40000002
i2c-rcar e66d8000.i2c: error -110 : 40000002
According to the R-Car Gen3 Hardware Manual Errata for Rev.
0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware
User's Manual, writes to SRCRn do not require read-modify-write cycles.
Note that the R-Car Gen2 Hardware User's Manual has not been updated
yet, and still says a read-modify-write sequence is required. According
to the hardware team, the reset hardware block is the same on both R-Car
Gen2 and Gen3, though.
Hence fix the issue by replacing the read-modify-write operations on
SRCRn by simple writes.
Reported-by: Yao Lihua <Lihua.Yao@desay-svautomotive.com>
Fixes: 6197aa65c4 ("clk: renesas: cpg-mssr: Add support for reset control")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols.
Fixes: d41f59fd92 ("clk: sprd: Add common infrastructure")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com>
Cc: Andrew Lunn <andrew@lunn.ch>
[paul.walmsley@sifive.com: changed "phy1" to "phy0" at Andrew Lunn's
suggestion]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Maxime didn't really compile-test this :-/
We need to re-apply
commit e4fa8457b2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jun 14 22:35:25 2019 +0200
drm/prime: Align gem_prime_export with obj_funcs.export
plus make sure i915_gem_dma_buf.c doesn't get zombie-resurrect. It
moved in
commit 10be98a77c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue May 28 10:29:49 2019 +0100
drm/i915: Move more GEM objects under gem/
v2: Remember the selftests (Chris).
Fixes: 03b0f2ce73 ("Merge v5.3-rc1 into drm-misc-next")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722213759.26612-1-daniel.vetter@ffwll.ch
The 13MHz clock should be registered before clocksource driver is
initialized. Use CLK_OF_DECLARE_DRIVER() to guarantee.
Fixes: acddfc2c26 ("clk: mediatek: Add MT8183 clock support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix an incomplete devm_clk_bulk_get_optional() function documentation
by adding description of the num_clks argument as in other *clk_bulk*
functions.
Fixes: 9bd5ef0bd8 ("clk: Add devm_clk_bulk_get_optional() function")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In clk_generated_determine_rate(), if the divisor is greater than
GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned.
If clk_generated_set_rate() will be called later with this wrong
rate, it will return -EINVAL, so the generated clock won't change
its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1.
Fixes: 8c7aa63289 ("clk: at91: clk-generated: remove useless divisor loop")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Move the MMC configuration from the board C file to devicetree.
The 'power' GPIO was removed and instead the vmmc regulator is used,
to follow the changes introduced in the jz4740-mmc driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
IEEE_8021QAZ_APP_SEL_STREAM is a valid selector for iSCSI connections, so
add code to use IEEE_8021QAZ_APP_SEL_STREAM selector to get priority mask.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch add translations for:
- programming-languages
- kernel-docs (It is better to not translate this since English is
a requirement to get something useful out of it)
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix an off-by-one typo in the transparent huge pages admin
documentation.
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch is to change msleep() to usleep_range() based on
Documentation/timers/timers-howto.txt. It suggests using usleep_range()
for small msec(1ms - 20ms) since msleep() will often sleep longer than
desired value.
After changing, booting time will be 5ms-10ms faster than before. I
tested this change on two different platforms, one has 5ms faster, another
one is about 10ms. I think this is different on different platform.
Actually, from UFS host side, 1ms-5ms delay is already sufficient for its
initialization of the local UIC layer.
Fixes: 7a3e97b0dc ([SCSI] ufshcd: UFS Host controller driver)
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A null check before a kfree is redundant, so remove it. This is detected
by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adding the command and kicking the virtqueue so far was done one after
another. Make the kick optional, so that we can take into account
SCMD_LAST. We also need a commit_rqs callback to kick the device if
blk-mq aborts the submission before the last request is reached.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This allows a list of requests to be issued, with the LLD only writing the
hardware doorbell when necessary, after the last request was prepared.
This is more efficient if we have lists of requests to issue, particularly
on virtualized hardware, where writing the doorbell is more expensive than
on real hardware.
The use case for this is plugged IO, where blk-mq flushes a batch of
requests all at once.
The API is the same as for blk-mq, just with blk-mq concepts tweaked to
fit the SCSI subsystem API: the "last" flag in blk_mq_queue_data becomes a
flag in scsi_cmnd, while the queue_num in the commit_rqs callback is
extracted from the hctx and passed as a parameter.
The only complication is that blk-mq uses different plugging heuristics
depending on whether commit_rqs is present or not. So we have two
different sets of blk_mq_ops and pick one depending on whether the
scsi_host template uses commit_rqs or not.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Added 'WITH Linux-syscall-note' exception which is the officially assigned
exception identifier for the kernel syscall exception. This exception
makes it possible to include GPL headers into non GPL code without
confusing license compliance tools.
Fixes: a851b2bd36 (scsi: uapi: ufs: Make utp_upiu_req visible to user space)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Pedro Sousa <pedrom.sousa@synopsys.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently only "interrupt-based" errors have their own history, however
there are some "non-interrupt-based" errors or events which need history
to improve debugging or help know the health status of UFS devices.
Example of fatal errors:
- Link startup error
- Suspend error
- Resume error
Example of abnormal events:
- Task or request abort
- Device reset (now equals to Logical Unit Reset)
- Host reset
This patch tries to track above errors and events by existed UFS error
history mechanism.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently UFS error history will be reset and lost during host reset flow
by ufschd_probe_hba().
Avoid resetting it so error history can be kept as complete as possible to
improve debugging.
In addition, fix a minor display error in ufshcd_print_err_hist().
[mkp: commit desc clarification]
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Provide more information about fatal and auto-hibern8 errors to improve
debugging by extending existing UFS error history framework.
[mkp: typos]
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove "uic" term in below error history functions and structures for more
general usages,
struct ufs_uic_err_reg_hist;
void ufshcd_update_uic_reg_hist(struct ufs_uic_err_reg_hist *reg_hist,
u32 reg);
void ufshcd_print_uic_err_hist(struct ufs_hba *hba,
struct ufs_uic)err_reg_hist *err_hist, char *err_name);
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The top-level page directory for 36b is a single entry, not multiple
like 32b. Fix up the rounding on the calculation of the size of the top
level so that we populate the 4th level correctly for 36b.
Reported-by: Jose Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 1eda701eac ("drm/i915/gtt: Recursive cleanup for gen8")
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719130737.5835-1-chris@chris-wilson.co.uk
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190722172618.4061-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On vega20, there is an SMU message to query it. On navi, it's fetched
from the metrics table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
add function smu_default_set_performance_level as default dpm level handler.
change function name smu_set_performance_level to smu_asic_set_performance_level
v1:
1.NAVI10_PEAK_SCLK_XTX 1830 Mhz
2.NAVI10_PEAK_SCLK_XT 1755 Mhz
3.NAVI10_PEAK_SCLK_XL 1625 Mhz
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PCF8563 has a binding of its own, with some, clocks related, additional
properties.
Remove it from the trivial RTC bindings.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190722140921.22681-1-maxime.ripard@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/20190717081411.30622-1-Anson.Huang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/20190717081217.30518-1-Anson.Huang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some RISC-V systems include PCIe host controllers that support PCIe
message-signaled interrupts. For this to work on Linux, we need to
enable PCI_MSI_IRQ_DOMAIN and define struct msi_alloc_info. Support
for the latter is enabled by including the architecture-generic msi.h
include.
Signed-off-by: Wesley Terpstra <wesley@sifive.com>
[paul.walmsley@sifive.com: split initial patch into one arch/riscv
patch and one drivers/pci patch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The "struct drm_connector" iteration cursor from
"for_each_new_connector_in_state" is never used in atomic_remove_fb()
which generates a compilation warning,
drivers/gpu/drm/drm_framebuffer.c: In function 'atomic_remove_fb':
drivers/gpu/drm/drm_framebuffer.c:838:24: warning: variable 'conn' set
but not used [-Wunused-but-set-variable]
Silence it by marking "conn" __maybe_unused.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563822886-13570-1-git-send-email-cai@lca.pw
The RISC-V port has grown significantly over the past year. Paul's been
helping out for a while ago. We agreed in person that he'd take over
collecting the patches and submitting the PRs, but it looks like I
forgot to make it official.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
On vega20, there is an SMU message to query it. On navi, it's fetched
from the metrics table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define pr_fmt() macro for prefixing the module name to all
pr_*() outputs, in order to increase log message clarity.
Signed-off-by: Enrico Weigelt <info@metux.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Otherwise, it will cause driver access non-existing sdma registers
in gpu reset code path
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current error message on failed probing tends to be a bit
misleading. Fix it to tell exactly that an APU v1 was not found.
Signed-off-by: Enrico Weigelt <info@metux.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
As this driver now only supports the APU1 boards, we don't need
to handle profiles anymore and just can use the only one global
array directly.
Signed-off-by: Enrico Weigelt <info@metux.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>