There is a race between reading task->exit_state in pidfd_poll and
writing it after do_notify_parent calls do_notify_pidfd. Expected
sequence of events is:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
tsk->exit_state = EXIT_DEAD
pidfd_poll
if (tsk->exit_state)
However nothing prevents the following sequence:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
pidfd_poll
if (tsk->exit_state)
tsk->exit_state = EXIT_DEAD
This causes a polling task to wait forever, since poll blocks because
exit_state is 0 and the waiting task is not notified again. A stress
test continuously doing pidfd poll and process exits uncovered this bug.
To fix it, we make sure that the task's exit_state is always set before
calling do_notify_pidfd.
Fixes: b53b0b9d9a ("pidfd: add polling support")
Cc: kernel-team@android.com
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org
[christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie]
Signed-off-by: Christian Brauner <christian@brauner.io>
Update MAINTAINERS and .mailmap with my @linaro.org address, since I
don't have access to my @arm.com address anymore.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
When a pin is active-low, logical trigger edge should be inverted to match
the same interrupt opportunity.
For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
IRQ requesting doesn't need to do any modification except to configuring
GPIOHANDLE_REQUEST_ACTIVE_LOW.
For example, we want to catch the event when the button is pushed. The
button on the original board drives level to be low when it is pushed, and
drives level to be high when it is released.
In user space we can do:
req.handleflags = GPIOHANDLE_REQUEST_INPUT;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
while (1) {
read(fd, &dat, sizeof(dat));
if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
printf("button pushed\n");
}
Run the same logic on another board which the polarity of the button is
inverted; it drives level to be high when pushed, and level to be low when
released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:
req.handleflags = GPIOHANDLE_REQUEST_INPUT |
GPIOHANDLE_REQUEST_ACTIVE_LOW;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
At the result, there are no any events caught when the button is pushed.
By the way, button releasing will emit a "falling" event. The timing of
"falling" catching is not expected.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Wu <michael.wu@vatics.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
While using the mmc_spi driver occasionally errors like this popped up:
mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 581756
I looked on the Internet for occurrences of the same problem and came
across a helpful post [1]. It includes source code to reproduce the bug.
There is also an analysis about the cause. During transmission data in the
supplied buffer is being modified. Thus the previously calculated checksum
is not correct anymore.
After some digging I found out that device drivers are supposed to report
they need stable writes. To fix this I set the appropriate flag at queue
initialization if CRC checksumming is enabled for that SPI host.
[1]
https://groups.google.com/forum/#!msg/sim1/gLlzWeXGFr8/KevXinUXfc8J
Signed-off-by: Andreas Koop <andreas.koop@zf.com>
[shihpo: Rebase on top of v5.3-rc1]
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
CC: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In some cases initial bind of scm memory for an lpar can fail if
previously it wasn't released using a scm-unbind hcall. This situation
can arise due to panic of the previous kernel or forced lpar
fadump. In such cases the H_SCM_BIND_MEM return a H_OVERLAP error.
To mitigate such cases the patch updates papr_scm_probe() to force a
call to drc_pmem_unbind() in case the initial bind of scm memory fails
with EBUSY error. In case scm-bind operation again fails after the
forced scm-unbind then we follow the existing error path. We also
update drc_pmem_bind() to handle the H_OVERLAP error returned by phyp
and indicate it as a EBUSY error back to the caller.
Suggested-by: "Oliver O'Halloran" <oohall@gmail.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-4-vaibhav@linux.ibm.com
The new hcall named H_SCM_UNBIND_ALL has been introduce that can
unbind all or specific scm memory assigned to an lpar. This is
more efficient than using H_SCM_UNBIND_MEM as currently we don't
support partial unbind of scm memory.
Hence this patch proposes following changes to drc_pmem_unbind():
* Update drc_pmem_unbind() to replace hcall H_SCM_UNBIND_MEM to
H_SCM_UNBIND_ALL.
* Update drc_pmem_unbind() to handles cases when PHYP asks the guest
kernel to wait for specific amount of time before retrying the
hcall via the 'LONG_BUSY' return value.
* Ensure appropriate error code is returned back from the function
in case of an error.
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-3-vaibhav@linux.ibm.com
Update the hvcalls.h to include op-codes for new hcalls introduce to
manage SCM memory. Also update existing hcall definitions to reflect
current papr specification for SCM.
The removed hcall op-codes H_SCM_MEM_QUERY, H_SCM_BLOCK_CLEAR were
transient proposals and there support was never implemented by
Power-VM nor they were used anywhere in Linux kernel. Hence we don't
expect anyone to be impacted by this change.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-2-vaibhav@linux.ibm.com
My @arm.com address will stop working in a couple of weeks. Update
MAINTAINERS and .mailmap files with an address I'll have access to.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fix a typo in my name for the KVM-ARM reviewers entry.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
I will soon lose access to my @arm.com email address, so let's
update the MAINTAINERS file to point to my @kernel.org address,
as well as .mailmap for good measure.
Note that my @arm.com address will still work, but someone else
will be reading whatever is sent there. Don't say you didn't know!
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Arguments are supposed to be ordered high then low.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: ed80a13bb4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic
Meson8 and Meson8b SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of always dereferencing &pdev->dev, just assign a helper local
variable of type struct device * and use it where applicable.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
We used to have a call to ilog2() in AT24_DEVICE_MAGIC(). That's long
gone so this header is no longer needed.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
In commit 46d179525a ("mmc: dw_mmc: Wait for data transfer after
response errors.") we fixed a tuning-induced hang that I saw when
stress testing tuning on certain SD cards. I won't re-hash that whole
commit, but the summary is that as a normal part of tuning you need to
deal with transfer errors and there were cases where these transfer
errors was putting my system into a bad state causing all future
transfers to fail. That commit fixed handling of the transfer errors
for me.
In downstream Chrome OS my fix landed and had the same behavior for
all SD/MMC commands. However, it looks like when the commit landed
upstream we limited it to only SD tuning commands. Presumably this
was to try to get around problems that Alim Akhtar reported on exynos
[1].
Unfortunately while stress testing reboots (and suspend/resume) on
some rk3288-based Chromebooks I found the same problem on the eMMC on
some of my Chromebooks (the ones with Hynix eMMC). Since the eMMC
tuning command is different (MMC_SEND_TUNING_BLOCK_HS200
vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the
same situation.
I'm hoping that whatever problems exynos was having in the past are
somehow magically fixed now and we can make the behavior the same for
all commands.
[1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@mail.gmail.com
Fixes: 46d179525a ("mmc: dw_mmc: Wait for data transfer after response errors.")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Alim Akhtar <alim.akhtar@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-7-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-6-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-5-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-4-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
VAG power control is improved to fit the manual [1]. This patch fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot,
the VAG power remains off that leads to poor sound quality from line-in.
I.e. after boot:
- Connect sound source to Line-In jack;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Change VAG power on/off control according to the following algorithm:
- turn VAG power ON on the 1st incoming event.
- keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
- turn VAG power OFF when there is the latest consumer's pre-down event
come.
- always delay after VAG power OFF to avoid pop.
- delay after VAG power ON if the initiative consumer is Line-In, this
prevents pop during line-in muxing.
According to the data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Cc: stable@vger.kernel.org
Fixes: 9b34e6cc3b ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Cc: stable@vger.kernel.org
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit ec0d23b295 ("ASoC: rockchip-max98090: Fix the Headset Mic
route.") moved the MICBIAS widget to supply Headset Mic but forget to
remove the MICBIAS widget to supply IN34 which is not really needed, so
remove that path so we have:
IN34 <==== Headset MIC <==== MICBIAS
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20190719180558.11459-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We enable the silence detection function in initial settings.
PDB control changes to manual mode, hence the driver could
fully control the AMP output on/off.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190719063249.18806-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1308_efuse function contains many redundant settings.
We remove the redundant settings and the function still works.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190719063235.18757-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the supplies and reset GPIO might need a probe deferral for the
resource to be available. Don't print a error message in that case, as
it is a normal operating condition.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Andrew F. Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20190719143637.2018-1-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA request schould be triggered as soon as the FIFO has space
for another burst. As different versions of the SAI block have
different FIFO sizes, the watrmark level needs to be derived from
version specific data.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Link: https://lore.kernel.org/r/20190717105635.18514-3-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
New revisions of the SAI IP block have even more differences that need
be taken into account by the driver. To avoid sprinking compatible
checks all over the driver move the current differences into of_match_data.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190717105635.18514-2-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IRQF_ONESHOT to ensure "Interrupt is not reenabled after the hardirq
handler finished".
fixes below issue reported by coccicheck
sound/soc/codecs/wcd9335.c:4068:8-33: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190710021627.GA13396@hari-Inspiron-1545
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes below issues reported by coccicheck
sound/soc/bcm/cygnus-pcm.c:642:5-8: Unneeded variable: "ret". Return "0"
on line 650
sound/soc/bcm/cygnus-pcm.c:671:5-8: Unneeded variable: "ret". Return "0"
on line 696
We cannot change return type of these functions as they are callback
functions of snd_pcm_ops
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190709184236.GA7873@hari-Inspiron-1545
Signed-off-by: Mark Brown <broonie@kernel.org>
When the SD host controller tries to probe again due to the derferred
probe mechanism, it will always keep the SD host device as runtime
resume state due to missing the runtime put operation in error path
last time.
Thus add the pm_runtime_put_noidle() in error path to make the PM runtime
counter balance, which can make the SD host device's PM runtime work well.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fb8bd90f83 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When optional clock requesting fails, the main clock is still up and running,
we should shut it down in such caee.
Fixes: 560ee7e910 ("spi: dw: Add support for an optional interface clock")
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Gareth Williams <gareth.williams.jx@renesas.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com>
Link: https://lore.kernel.org/r/20190710114243.30101-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet http://www.ti.com/lit/ds/symlink/lm36274.pdf:
Table 23. VPOS Bias Register Field Descriptions VPOS[5:0]:
VPOS voltage (50-mV steps): VPOS = 4 V + (Code × 50 mV), 6.5 V max
000000 = 4 V
000001 = 4.05 V
:
011110 = 5.5 V (Default)
:
110010 = 6.5 V
110011 to 111111 map to 6.5 V
So the LM36274_LDO_VSEL_MAX should be 0b110010 (0x32).
The valid selectors are 0 ... LM36274_LDO_VSEL_MAX, n_voltages should be
LM36274_LDO_VSEL_MAX + 1. Similarly, the n_voltages should be
LM36274_BOOST_VSEL_MAX + 1 for LM36274_BOOST.
Fixes: bff5e80715 ("regulator: lm363x: Add support for LM36274")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190626132632.32629-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf
Table 20. VPOS Bias Register Field Descriptions VPOS[5:0]
Sets the Positive Display Bias (LDO) Voltage (50 mV per step)
000000: 4 V
000001: 4.05 V
000010: 4.1 V
....................
011101: 5.45 V
011110: 5.5 V (Default)
011111: 5.55 V
....................
100111: 5.95 V
101000: 6 V
Note: Codes 101001 to 111111 map to 6 V
The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage
can match the datasheet.
Fixes: 3a8d1a73a0 ("regulator: add LM363X driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As mt6358_codec_init_reg function always returns 0 , change return type
from int to void.
fixes below issue reported by coccicheck
sound/soc/codecs/mt6358.c:2260:5-8: Unneeded variable: "ret". Return "0"
on line 2289
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190709182543.GA6611@hari-Inspiron-1545
Signed-off-by: Mark Brown <broonie@kernel.org>
Extract the operation to be functions, to improve the
readability.
In this patch, fsl_esai_hw_init, fsl_esai_register_restore,
fsl_esai_trigger_start and fsl_esai_trigger_stop are
extracted.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/804d7e75ae7e06a913479912b578b3538ca7cd3f.1562842206.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using regmap_multi_reg_write() when we set the default values for our
registers makes the code smaller and easier to read.
Suggested-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190710105119.22987-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_hdac_ext_bus_device_exit() has been recently modified
to no longer free the hdac device. SOF allocates memory for
hdac_device and hda_hda_priv with kzalloc. Make them
device-managed instead so that they will be freed when the
SOF driver is unloaded.
Because of the above change, hda_codec is device-managed and
it will be freed when the ASoC device is removed. Freeing
the codec in snd_hda_codec_dev_release() leads to kernel
panic while unloading and reloading the ASoC driver. So,
avoid freeing the hda_codec for ASoC driver. This is done in
the same patch to avoid bisect failure.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190626070450.7229-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Oded writes:
This tag contains the following fixes:
- Fix to VRHOT event handling from the ASIC. No need to reset the ASIC,
just notify it in dmesg.
- Fix printk specifier for printing dma address
* tag 'misc-habanalabs-fixes-2019-07-22' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: don't reset device when getting VRHOT
habanalabs: use %pad for printing a dma_addr_t
Don't undo the PM initialization if we error out before we managed to
initialize it. The call to pm_runtime_disable() without being preceded
by pm_runtime_enable() would disturb the balance of the Force.
In practice, this happens if we fail to allocate any of the GPIOS ("cs",
"ready") due to -EPROBE_DEFER because we're getting probled before the
GPIO driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20190719122713.3444318-1-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to
make sure they can be included from user-space.
Currently, header.h and fw.h are excluded from the test coverage.
To make them join the compile-test, we need to fix the build errors
attached below.
For a case like this, we decided to use __u{8,16,32,64} variable types
in this discussion:
https://lkml.org/lkml/2019/6/5/18
Build log:
CC usr/include/sound/sof/header.h.s
CC usr/include/sound/sof/fw.h.s
In file included from <command-line>:32:0:
./usr/include/sound/sof/header.h:19:2: error: unknown type name ‘uint32_t’
uint32_t magic; /**< 'S', 'O', 'F', '\0' */
^~~~~~~~
./usr/include/sound/sof/header.h:20:2: error: unknown type name ‘uint32_t’
uint32_t type; /**< component specific type */
^~~~~~~~
./usr/include/sound/sof/header.h:21:2: error: unknown type name ‘uint32_t’
uint32_t size; /**< size in bytes of data excl. this struct */
^~~~~~~~
./usr/include/sound/sof/header.h:22:2: error: unknown type name ‘uint32_t’
uint32_t abi; /**< SOF ABI version */
^~~~~~~~
./usr/include/sound/sof/header.h:23:2: error: unknown type name ‘uint32_t’
uint32_t reserved[4]; /**< reserved for future use */
^~~~~~~~
./usr/include/sound/sof/header.h:24:2: error: unknown type name ‘uint32_t’
uint32_t data[0]; /**< Component data - opaque to core */
^~~~~~~~
In file included from <command-line>:32:0:
./usr/include/sound/sof/fw.h:49:2: error: unknown type name ‘uint32_t’
uint32_t size; /* bytes minus this header */
^~~~~~~~
./usr/include/sound/sof/fw.h:50:2: error: unknown type name ‘uint32_t’
uint32_t offset; /* offset from base */
^~~~~~~~
./usr/include/sound/sof/fw.h:64:2: error: unknown type name ‘uint32_t’
uint32_t size; /* bytes minus this header */
^~~~~~~~
./usr/include/sound/sof/fw.h:65:2: error: unknown type name ‘uint32_t’
uint32_t num_blocks; /* number of blocks */
^~~~~~~~
./usr/include/sound/sof/fw.h:73:2: error: unknown type name ‘uint32_t’
uint32_t file_size; /* size of file minus this header */
^~~~~~~~
./usr/include/sound/sof/fw.h:74:2: error: unknown type name ‘uint32_t’
uint32_t num_modules; /* number of modules */
^~~~~~~~
./usr/include/sound/sof/fw.h:75:2: error: unknown type name ‘uint32_t’
uint32_t abi; /* version of header format */
^~~~~~~~
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190721142308.30306-1-yamada.masahiro@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TS3A227E says that the headset keypress detection needs the MICBIAS
power in order to report the key events to ensure proper operation
The headset keypress detection needs the MICBIAS power in order to report
the key events all the time as long as MIC is present. So MICBIAS pin
is forced on when a MICROPHONE is detected.
On Veyron Minnie I observed that if the MICBIAS power is not present and
the key press detection is activated (just because it is enabled when you
insert a headset), it randomly reports a keypress on insert.
E.g. (KEY_PLAYPAUSE)
Event: (SW_HEADPHONE_INSERT), value 1
Event: (SW_MICROPHONE_INSERT), value 1
Event: -------------- SYN_REPORT ------------
Event: (KEY_PLAYPAUSE), value 1
Userspace thinks that KEY_PLAYPAUSE is pressed and produces the annoying
effect that the media player starts a play/pause loop.
Note that, although most of the time the key reported is the one
associated with BTN_0, not always this is true. On my tests I also saw
different keys reported
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20190719173929.24065-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When sample rate of TX is different with sample rate of RX in
async mode, the MFreq selection will be wrong.
For example, sysclk = 24.576MHz, TX rate = 96000Hz, RX rate = 48000Hz.
Then ratio of TX = 256, ratio of RX = 512, For MFreq is shared by TX
and RX instance, the correct value of MFreq is 2 for both TX and RX.
But original method will cause MFreq = 0 for TX, MFreq = 2 for RX.
If TX is started after RX, RX will be impacted, RX work abnormal with
MFreq = 0.
This patch is to select proper MFreq value according to TX rate and
RX rate.
Fixes: 0c516b4ff8 ("ASoC: cs42xx8: Add codec driver support for CS42448/CS42888")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/20190716094547.46787-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>