Commit graph

982,081 commits

Author SHA1 Message Date
Stefano Garzarella
17dd136738 vsock/virtio: stop workers during the .remove()
Before to call vdev->config->reset(vdev) we need to be sure that
no one is accessing the device, for this reason, we add new variables
in the struct virtio_vsock to stop the workers during the .remove().

This patch also add few comments before vdev->config->reset(vdev)
and vdev->config->del_vqs(vdev).

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 19:09:07 -07:00
Stefano Garzarella
9c7a5582f5 vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock
Some callbacks used by the upper layers can run while we are in the
.remove(). A potential use-after-free can happen, because we free
the_virtio_vsock without knowing if the callbacks are over or not.

To solve this issue we move the assignment of the_virtio_vsock at the
end of .probe(), when we finished all the initialization, and at the
beginning of .remove(), before to release resources.
For the same reason, we do the same also for the vdev->priv.

We use RCU to be sure that all callbacks that use the_virtio_vsock
ended before freeing it. This is not required for callbacks that
use vdev->priv, because after the vdev->config->del_vqs() we are sure
that they are ended and will no longer be invoked.

We also take the mutex during the .remove() to avoid that .probe() can
run while we are resetting the device.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 19:09:07 -07:00
Clement Leger
72f64cabc4 remoteproc: copy parent dma_pfn_offset for vdev
When preparing the subdevice for the vdev, also copy dma_pfn_offset
since this is used for sub device dma allocations. Without that, there
is incoherency between the parent dma settings and the childs one,
potentially leading to dma_alloc_coherent failure (due to phys_to_dma
using dma_pfn_offset for translation).

Fixes: 086d08725d ("remoteproc: create vdev subdevice with specific dma memory pool")
Signed-off-by: Clement Leger <cleger@kalray.eu>
Acked-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-01 19:09:01 -07:00
Taehee Yoo
7c31e54aee vxlan: do not destroy fdb if register_netdevice() is failed
__vxlan_dev_create() destroys FDB using specific pointer which indicates
a fdb when error occurs.
But that pointer should not be used when register_netdevice() fails because
register_netdevice() internally destroys fdb when error occurs.

This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev
internally.
Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan
dev.

vxlan_fdb_insert() is called after calling register_netdevice().
This routine can avoid situation that ->ndo_uninit() destroys fdb entry
in error path of register_netdevice().
Hence, error path of __vxlan_dev_create() routine can have an opportunity
to destroy default fdb entry by hand.

Test command
    ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \
	    dev enp0s9 dstport 4789

Splat looks like:
[  213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256
[  213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan]
[  213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d
[  213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202
[  213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000
[  213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0
[  213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000
[  213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200
[  213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0
[  213.402178] FS:  00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
[  213.402178] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0
[  213.402178] Call Trace:
[  213.402178]  __vxlan_dev_create+0x3a9/0x7d0 [vxlan]
[  213.402178]  ? vxlan_changelink+0x740/0x740 [vxlan]
[  213.402178]  ? rcu_read_unlock+0x60/0x60 [vxlan]
[  213.402178]  ? __kasan_kmalloc.constprop.3+0xa0/0xd0
[  213.402178]  vxlan_newlink+0x8d/0xc0 [vxlan]
[  213.402178]  ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan]
[  213.554119]  ? __netlink_ns_capable+0xc3/0xf0
[  213.554119]  __rtnl_newlink+0xb75/0x1180
[  213.554119]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 0241b83673 ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 19:06:02 -07:00
Eiichi Tsukata
00dc3307c0 net/ipv6: Fix misuse of proc_dointvec "flowlabel_reflect"
/proc/sys/net/ipv6/flowlabel_reflect assumes written value to be in the
range of 0 to 3. Use proc_dointvec_minmax instead of proc_dointvec.

Fixes: 323a53c412 ("ipv6: tcp: enable flowlabel reflection in some RST packets")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 19:04:48 -07:00
Yunsheng Lin
27ba4059e0 net: link_watch: prevent starvation when processing linkwatch wq
When user has configured a large number of virtual netdev, such
as 4K vlans, the carrier on/off operation of the real netdev
will also cause it's virtual netdev's link state to be processed
in linkwatch. Currently, the processing is done in a work queue,
which may cause rtnl locking starvation problem and worker
starvation problem for other work queue, such as irqfd_inject wq.

This patch releases the cpu when link watch worker has processed
a fixed number of netdev' link watch event, and schedule the
work queue again when there is still link watch event remaining.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 19:02:47 -07:00
Bjorn Andersson
f04b913834 remoteproc: qcom: q6v5-mss: Support loading non-split images
In some software releases the firmware images are not split up with each
loadable segment in it's own file. Check the size of the loaded firmware
to see if it still contains each segment to be loaded, before falling
back to the split-out segments.

Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-01 19:02:32 -07:00
Bjorn Andersson
498b98e939 soc: qcom: mdt_loader: Support loading non-split images
In some software releases the firmware images are not split up with each
loadable segment in it's own file. Check the size of the loaded firmware
to see if it still contains each segment to be loaded, before falling
back to the split-out segments.

Acked-by: Andy Gross <agross@kernel.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-01 19:02:28 -07:00
Marcelo Ricardo Leitner
4d1415811e sctp: fix error handling on stream scheduler initialization
It allocates the extended area for outbound streams only on sendmsg
calls, if they are not yet allocated.  When using the priority
stream scheduler, this initialization may imply into a subsequent
allocation, which may fail.  In this case, it was aborting the stream
scheduler initialization but leaving the ->ext pointer (allocated) in
there, thus in a partially initialized state.  On a subsequent call to
sendmsg, it would notice the ->ext pointer in there, and trip on
uninitialized stuff when trying to schedule the data chunk.

The fix is undo the ->ext initialization if the stream scheduler
initialization fails and avoid the partially initialized state.

Although syzkaller bisected this to commit 4ff40b8626 ("sctp: set
chunk transport correctly when it's a new asoc"), this bug was actually
introduced on the commit I marked below.

Reported-by: syzbot+c1a380d42b190ad1e559@syzkaller.appspotmail.com
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 19:01:47 -07:00
Cong Wang
c8c8218ec5 netrom: fix a memory leak in nr_rx_frame()
When the skb is associated with a new sock, just assigning
it to skb->sk is not sufficient, we have to set its destructor
to free the sock properly too.

Reported-by: syzbot+d6636a36d3c34bd88938@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 19:00:52 -07:00
David S. Miller
0d0bcacc54 Merge branch 'mlxsw-PTP-timestamping-support'
Ido Schimmel says:

====================
mlxsw: PTP timestamping support

This is the second patchset adding PTP support in mlxsw. Next patchset
will add PTP shapers which are required to maintain accuracy under rates
lower than 40Gb/s, while subsequent patchsets will add tracepoints and
selftests.

Petr says:

This patch set introduces support for retrieving and processing hardware
timestamps for PTP packets.

The way PTP timestamping works on Spectrum-1 is that there are two queues
associated with each front panel port. When a packet is timestamped, the
timestamp is put to one of the queues: timestamps for transmitted packets
to one and for received packets to the other. Activity on these queues is
signaled through the events PTP_ING_FIFO and PTP_EGR_FIFO.

Packets themselves arrive through two traps: PTP0 and PTP1. It is possible
to configure which PTP messages should be trapped under which PTP trap. On
Spectrum systems, mlxsw will use PTP0 for event messages (which need
timestamping), and PTP1 for general messages (which do not).

There are therefore four relevant traps: receive of PTP event resp. general
message, and receive of timestamp for a transmitted resp. received PTP
packet. The obvious point where to put the new logic is a custom listener
to the mentioned traps.

Besides handling ingress traffic (be in packets or timestamps), the driver
also needs to handle timestamping of transmitted packets. One option would
be to invoke the relevant logic from mlxsw_core_ptp_transmitted(). However
on Spectrum-2, the timestamps are actually delivered through the completion
queue, and for that reason this patchset opts to invoke the logic from the
PCI code, via core and the driver, to a chip-specific operation. That way
the invocation will be done in a place where a Spectrum-2 implementation
will have an opportunity to extract the timestamp.

As indicated above, the PTP FIFO signaling happens independently from
packet delivery. A packet corresponding to any given timestamp could be
delivered sooner or later than the timestamp itself. Additionally, the
queues are only four elements deep, and it is therefore possible that the
timestamp for a delivered packet never arrives at all. Similarly a PTP
packet might be dropped due to CPU traffic pressure, and never be delivered
even if the corresponding timestamp was.

The driver thus needs to hold a cache of as-yet-unmatched SKBs and
timestamps. The first piece to arrive (be it timestamp or SKB) is put to
this cache. When the other piece arrives, the timestamp is attached to the
SKB and that is passed on. A delayed work is run at regular intervals to
prune the old unmatched entries.

As mentioned above, the mechanism for timestamp delivery changes on
Spectrum-2, where timestamps are part of completion queue elements, and all
packets are timestamped. All this bookkeeping is therefore unnecessary on
Spectrum-2. For this reason, this patchset spends some time introducing
Spectrum-1 specific artifacts such as a possibility to register a given
trap only on Spectrum-1.

Patches #1-#4 describe new registers.

Patches #5 and #6 introduce the possibility to register certain traps
only on some systems. The list of Spectrum-1 specific traps is left empty
at this point.

Patch #7 hooks into packet receive path by registering PTP traps
and appropriate handlers (that however do nothing of substance yet).

Patch #8 adds a helper to allow storing custom data to SKB->cb.

Patch #9 adds a call into the PCI completion queue handler that invokes,
via core and spectrum code, a PTP transmit handler. (Which also does not do
anything interesting yet.)

Patch #10 introduces code to invoke PTP initialization and adds data types
for the cache of unmatched entries.

Patches #11 and #12 implement the timestamping itself. In #11, the PHC
spin_locks are converted to _bh variants, because unlike normal PHC path,
which runs in process context, timestamp processing runs as soft interrupt.
Then #12 introduces the code for saving and retrieval of unmatched entries,
invokes PTP classifier to identify packets of interest, registers timestamp
FIFO events, and handles decoding and attaching timestamps to packets.

Patch #13 introduces a garbage collector for left-behind entries that have
not been matched for about a second.

In patch #14, PTP message types are configured to arrive as PTP0
(events) or PTP1 (everything else) as appropriate. At this point, the PTP
packets start arriving through the traps, but because PTP is disabled and
there is no way to enable it yet, they are always just passed to the usual
receive path right away.

Finally patches #15 and #16 add the plumbing to actually make it possible
to enable this code through SIOCSHWTSTAMP ioctl, and to advertise the
hardware timestamping capabilities through ethtool.

v2:
- Patch #12:
    - In mlxsw_sp1_ptp_fifo_event_func(), post-increment when iterating over PTP
      FIFO records.
- Patch #14:
    - Change namespace of message type enumerators from MLXSW_ to MLXSW_SP_.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:35 -07:00
Petr Machata
87ee07f8e2 mlxsw: spectrum: PTP: Support ethtool get_ts_info
The get_ts_info callback is used for obtaining information about
timestamping capabilities of a network device. On Spectrum-1, implement
it to advertise the PHC and the capability to do HW timestamping, and
the supported RX and TX filters.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:35 -07:00
Petr Machata
8748642751 mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls
The SIOCSHWTSTAMP ioctl configures HW timestamping on a given port.
Dispatch the ioctls to per-chip handler (which add to ptp_ops). Find
which PTP messages need to be timestamped and configure MTPPPC
accordingly.

The SIOCGHWTSTAMP ioctl is getter for the current configuration.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
a773c76cb8 mlxsw: spectrum: PTP: Configure PTP traps and FIFO events
Configure MTPTPT to set which message types should arrive under which
PTP trap, and MOGCR to clear the timestamp queue after its contents are
reported through PTP_ING_FIFO or PTP_EGR_FIFO.

With this configuration, PTP packets start arriving through the PTP
traps. However since timestamping is disabled by default and there is
currently no way to enable it, they will not be timestamped.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
5d23e41597 mlxsw: spectrum: PTP: Garbage-collect unmatched entries
On Spectrum-1, timestamped PTP packets and the corresponding timestamps
need to be kept in caches until both are available, at which point they are
matched up and packets forwarded as appropriate. However, not all packets
will ever see their timestamp, and not all timestamps will ever see their
packet. It is therefore necessary to dispose of such abandoned entries.

To that end, introduce a garbage collector to collect entries that have
not had their counterpart turn up within about a second. The GC
maintains a monotonously-increasing value of GC cycle. Every entry that
is put to the hash table is annotated with the GC cycle at which it
should be collected. When the GC runs, it walks the hash table, and
collects the objects according to their GC cycle annotation.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
d92e4e6e33 mlxsw: spectrum: PTP: Support timestamping on Spectrum-1
On Spectrum-1, timestamps arrive through a pair of dedicated events:
MLXSW_TRAP_ID_PTP_ING_FIFO and _EGR_FIFO. The payload delivered with
those traps is contents of the timestamp FIFO at a given port in a given
direction. Add a Spectrum-1-specific handler for these two events which
decodes the timestamps and forwards them to the PTP module.

Add a function that parses a packet, dispatching to ptp_classify_raw(),
and decodes PTP message type, domain number, and sequence ID. Add a new
mlxsw dependency on the PTP classifier.

Add helpers that can store and retrieve unmatched timestamps and SKBs to
the hash table added in a preceding patch.

Add the matching code itself: upon arrival of a timestamp or a packet,
look up the corresponding unmatched entry, and match it up. If there is
none, add a new unmatched entry. This logic is the same on ingress as on
egress.

Packets and timestamps that never matched need to be eventually disposed
of. A garbage collector added in a follow-up patch will take care of
that. Since currently all this code is turned off, no crud will
accumulate in the hash table.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
89e602ee6e mlxsw: spectrum: PTP: Disable BH when working with PHC
Up until now, the PTP hardware clock code was only invoked in the process
context (SYS_clock_adjtime -> do_clock_adjtime -> k_clock::clock_adj ->
pc_clock_adjtime -> posix_clock_operations::clock_adjtime ->
ptp_clock_info::adjtime -> mlxsw_spectrum).

In order to enable HW timestamping, which is tied into trap handling, it
will be necessary to take the clock lock from the PCI queue handler
tasklets as well.

Therefore use the _bh variants when handling the clock lock. Incidentally,
Documentation/ptp/ptp.txt recommends _irqsave variants, but that's
unnecessarily strong for our needs.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
810256cec1 mlxsw: spectrum: PTP: Add PTP initialization / finalization
Add two ptp_ops: init and fini, to initialize and finalize the PTP
subsystem. Call as appropriate from mlxsw_sp_init() and _fini().

Lay the groundwork for Spectrum-1 support. On Spectrum-1, the received
timestamped packets and their corresponding timestamps arrive
independently, and need to be matched up. Introduce the related data types
and add to struct mlxsw_sp_ptp_state the hash table that will keep the
unmatched entries.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
0714256c3d mlxsw: pci: PTP: Hook into packet transmit path
On Spectrum-1, timestamps are delivered separately from the packets, and
need to paired up. Therefore, at some point after mlxsw_sp_port_xmit()
is invoked, it is necessary to involve the chip-specific driver code to
allow it to do the necessary bookkeeping and matching.

On Spectrum-2, timestamps are delivered in CQE. For that reason,
position the point of driver involvement into mlxsw_pci_cqe_sdq_handle()
to make it hopefully easier to extend for Spectrum-2 in the future.

To tell the driver what port the packet was sent on, keep tx_info
in SKB control buffer.

Introduce a new driver core interface mlxsw_core_ptp_transmitted(), a
driver callback ptp_transmitted, and a PTP op transmitted. The callee is
responsible for taking care of releasing the SKB passed to the new
interfaces, and correspondingly have the new stub callbacks just call
dev_kfree_skb_any().

Follow-up patches will introduce the actual content into
mlxsw_sp1_ptp_transmitted() in particular.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
d7cd206dbf mlxsw: core: Add support for using SKB control buffer
The SKB control buffer is useful (and used) for bookkeeping of information
related to that SKB. Add helpers so that the mlxsw driver(s) can safely use
the buffer as well. The structure is currently empty, individual users will
add members to it as necessary.

Note that SKB allocation functions already clear the buffer, so the cleanup
is only necessary when ndo_start_xmit is called.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
aed4b57211 mlxsw: spectrum: PTP: Hook into packet receive path
When configured, the Spectrum hardware can recognize PTP packets and
trap them to the CPU using dedicated traps, PTP0 and PTP1.

One reason to get PTP packets under dedicated traps is to have a
separate policer suitable for the amount of PTP traffic expected when
switch is operated as a boundary clock. For this, add two new trap
groups, MLXSW_REG_HTGT_TRAP_GROUP_SP_PTP0 and _PTP1, and associate the
two PTP traps with these two groups.

In the driver, specifically for Spectrum-1, event PTP packets will need
to be paired up with their timestamps. Those arrive through a different
set of traps, added later in the patch set. To support this future use,
introduce a new PTP op, ptp_receive.

It is possible to configure which PTP messages should be trapped under
which PTP trap. On Spectrum systems, we will use PTP0 for event
packets (which need timestamping), and PTP1 for control packets (which
do not). Thus configure PTP0 trap with a custom callback that defers to
the ptp_receive op.

Additionally, L2 PTP packets are actually trapped through the LLDP trap,
not through any of the PTP traps. So treat the LLDP trap the same way as
the PTP0 trap. Unlike PTP traps, which are currently still disabled,
LLDP trap is active. Correspondingly, have all the implementations of
the ptp_receive op return true, which the handler treats as a signal to
forward the packet immediately.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
dadbc6bc09 mlxsw: spectrum: Add support for traps specific to Spectrum-1
On Spectrum-1, timestamps for PTP packets are delivered through queues
of ingress and egress timestamps. There are two event traps
corresponding to activity on each of those queues. This mechanism is
absent on Spectrum-2, and therefore the traps should only be registered
on Spectrum-1.

Carry a chip-specific listener array in mlxsw_sp->listeners and
listeners_count. Register listeners from that array in
mlxsw_sp_traps_init(). Add a new listener array for Spectrum-1 traps and
configure the newly-added mlxsw_sp->listeners with this array.

The listener array is empty for now, the events will be added in a later
patch.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
4b6b91ed2d mlxsw: spectrum: Extract a helper for trap registration
On Spectrum-1, timestamps for PTP packets are delivered through queues
of ingress and egress timestamps. There are two event traps
corresponding to activity on each of those queues. This mechanism is
absent on Spectrum-2, and therefore the traps should only be registered
on Spectrum-1.

Extract out of mlxsw_sp_traps_init() a generic helper,
mlxsw_sp_traps_register(), and likewise with _unregister(). The new helpers
will later be called with Spectrum-1-specific traps.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
41ce78b92e mlxsw: reg: Add Monitoring Global Configuration Register
This register serves to configure global parameters of certain
monitoring operations. The following patches will use it to configure
that when PTP timestamps are delivered through the PTP FIFO traps, the
FIFO in question is cleared as well.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
98b9028ea5 mlxsw: reg: Add Time Precision Packet Timestamping Reading
The MTPPTR is used for reading the per port PTP timestamp FIFO.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:34 -07:00
Petr Machata
4dfecb6570 mlxsw: reg: Add Monitoring Precision Time Protocol Trap Register
This register is used for configuring under which trap to deliver PTP
packets depending on type of the packet.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:33 -07:00
Petr Machata
da28e87847 mlxsw: reg: Add Monitoring Time Precision Packet Port Configuration Register
This register serves for configuration of which PTP messages should be
timestamped. This is a global configuration, despite the register name.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 18:58:33 -07:00
Luke Mujica
06c642c0e9 perf jevents: Use nonlocal include statements in pmu-events.c
Change pmu-events.c to not use local include statements. The code that
creates the include statements for pmu-events.c is in jevents.c.

pmu-events.c is a generated file, and for build systems that put
generated files in a separate directory, include statements with local
pathing cannot find non-generated files.

Signed-off-by: Luke Mujica <lukemujica@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/n/tip-prgnwmaoo1pv9zz4vnv1bjaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:42 -03:00
Mao Han
aa23aa5516 perf annotate: Add csky support
This patch add basic arch initialization and instruction associate
support for the csky CPU architecture.

E.g.:

  $ perf annotate --stdio2
  Samples: 161  of event 'cpu-clock:pppH', 4000 Hz, Event count (approx.):
  40250000, [percent: local period]
  test_4() /usr/lib/perf-test/callchain_test
  Percent

              Disassembly of section .text:

              00008420 <test_4>:
            test_4():
                subi  sp, sp, 4
                st.w  r8, (sp, 0x0)
                mov   r8, sp
                subi  sp, sp, 8
                subi  r3, r8, 4
                movi  r2, 0
                st.w  r2, (r3, 0x0)
              ↓ br    2e
  100.00  14:   subi  r3, r8, 4
                ld.w  r2, (r3, 0x0)
                subi  r3, r8, 8
                st.w  r2, (r3, 0x0)
                subi  r3, r8, 4
                ld.w  r3, (r3, 0x0)
                addi  r2, r3, 1
                subi  r3, r8, 4
                st.w  r2, (r3, 0x0)
          2e:   subi  r3, r8, 4
                ld.w  r2, (r3, 0x0)
                lrw   r3, 0x98967f    // 8598 <main+0x28>
                cmplt r3, r2
              ↑ bf    14
                mov   r0, r0
                mov   r0, r0
                mov   sp, r8
                ld.w  r8, (sp, 0x0)
                addi  sp, sp, 4
              ← rts

Signed-off-by: Mao Han <han_mao@c-sky.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-csky@vger.kernel.org
Link: http://lkml.kernel.org/r/d874d7782d9acdad5d98f2f5c4a6fb26fbe41c5d.1561531557.git.han_mao@c-sky.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:41 -03:00
Andi Kleen
e3a9427323 perf stat: Fix metrics with --no-merge
Since Fixes: 8c5421c016 ("perf pmu: Display pmu name when printing
unmerged events in stat") using --no-merge adds the PMU name to the
evsel name.

This breaks the metric value lookup because the parser doesn't know
about this.

Remove the extra postfixes for the metric evaluation.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 8c5421c016 ("perf pmu: Display pmu name when printing unmerged events in stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:41 -03:00
Andi Kleen
2f87f33f42 perf stat: Fix group lookup for metric group
The metric group code tries to find a group it added earlier in the
evlist. Fix the lookup to handle groups with partially overlaps
correctly. When a sub string match fails and we reset the match, we have
to compare the first element again.

I also renamed the find_evsel function to find_evsel_group to make its
purpose clearer.

With the earlier changes this fixes:

Before:

  % perf stat -M UPI,IPC sleep 1
  ...
         1,032,922      uops_retired.retire_slots #      1.1 UPI
         1,896,096      inst_retired.any
         1,896,096      inst_retired.any
         1,177,254      cpu_clk_unhalted.thread

After:

  % perf stat -M UPI,IPC sleep 1
  ...
        1,013,193      uops_retired.retire_slots #      1.1 UPI
           932,033      inst_retired.any
           932,033      inst_retired.any          #      0.9 IPC
         1,091,245      cpu_clk_unhalted.thread

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: b18f3e3650 ("perf stat: Support JSON metrics in perf stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:41 -03:00
Andi Kleen
6c5f4e5cb3 perf stat: Don't merge events in the same PMU
Event merging is mainly to collapse similar events in lots of different
duplicated PMUs.

It can break metric displaying. It's possible for two metrics to have
the same event, and when the two events happen in a row the second
wouldn't be displayed.  This would also not show the second metric.

To avoid this don't merge events in the same PMU. This makes sense, if
we have multiple events in the same PMU there is likely some reason for
it (e.g. using multiple groups) and we better not merge them.

While in theory it would be possible to construct metrics that have
events with the same name in different PMU no current metrics have this
problem.

This is the fix for perf stat -M UPI,IPC (needs also another bug fix to
completely work)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 430daf2dc7 ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20190624193711.35241-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:41 -03:00
Andi Kleen
145c407c80 perf stat: Make metric event lookup more robust
After setting up metric groups through the event parser, the metricgroup
code looks them up again in the event list.

Make sure we only look up events that haven't been used by some other
metric. The data structures currently cannot handle more than one metric
per event. This avoids problems with multiple events partially
overlapping.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lkml.kernel.org/r/20190624193711.35241-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:41 -03:00
Arnaldo Carvalho de Melo
9c10548c42 tools lib: Move argv_{split,free} from tools/perf/util/
This came from the kernel lib/argv_split.c, so move it to
tools/lib/argv_split.c, to get it closer to the kernel structure.

We need to audit the usage of argv_split() to figure out if it is really
necessary to do have one allocation per argv[] entry, looking at one of
its users I guess that is not the case and we probably are even leaking
those allocations by not using argv_free() judiciously, for later.

With this we further remove stuff from tools/perf/util/, reducing the
perf specific codebase and encouraging other tools/ code to use these
routines so as to keep the style and constructs used with the kernel.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-j479s1ive9h75w5lfg16jroz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:40 -03:00
Arnaldo Carvalho de Melo
af0de0c5f0 perf tools: Drop strxfrchar(), use strreplace() equivalent from kernel
No change in behaviour intended, just reducing the codebase and using
something available in tools/lib/.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-oyi6zif3810nwi4uu85odnhv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:40 -03:00
Arnaldo Carvalho de Melo
2a60689a33 tools lib: Adopt strreplace() from the kernel
We'll use it to further reduce the size of tools/perf/util/string.c,
replacing the strxfrchar() equivalent function we have there.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x3r61ikjrso1buygxwke8id3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:40 -03:00
Arnaldo Carvalho de Melo
13c230ab6e perf tools: Ditch rtrim(), use strim() from tools/lib
Cleaning up a bit more tools/perf/util/ by using things we got from the
kernel and have in tools/lib/

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7hluuoveryoicvkclshzjf1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-01 22:50:33 -03:00
Bodong Wang
4a3929b223 net/mlx5: E-Switch, Handle UC address change in switchdev mode
When NVME device emulation mode is enabled, more than one PFs use the
same physical port. In this case, MPFS is required to program L2
addresses.

It used to rely on netdev set_rx_mode in switchdev mode, but driver
later changed to not create netdev for eswitch manager once in
switchdev mode. So, UC address event should be handled.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:31 -07:00
Bodong Wang
411ec9e0b4 net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop
When ECPF is the eswitch manager, host PF is treated like other VFs.
Driver should do the same for inline mode and vlan pop.

Add new iterators to include host PF if ECPF is the eswitch manager.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:31 -07:00
Bodong Wang
db68cc569e net/mlx5: E-Switch, Use iterator for vlan and min-inline setups
Use the defined iterators to traversal VF reps/vport. Also, rely on
num of VFs rather than the counter of enabled vports as PF will also
be enabled from ECPF side, and the counter will be different from
num of VFs.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:31 -07:00
Bodong Wang
16fff98a7e net/mlx5: E-Switch, Reg/unreg function changed event at correct stage
When driver is doing eswitch mode change, it's critical to keep number
of enabled VFs unchanged. However, it can be changed on the fly once
function changed event is registered.

To remove this uncertainty, function changed event should not be
registered before all setups, and first be unregistered before all
cleanups. Wrap this functionality together with vport event handler.

Fixes: 61fc880839e6 ("net/mlx5: E-Switch, Handle representors creation in handler context")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:31 -07:00
Bodong Wang
062f4bf4aa net/mlx5: E-Switch, Consolidate eswitch function number of VFs
Enabled number of VFs is key for eswich manager to do flow steering
initialization and vport configurations. However, the number of
enabled VFs may come from two sources as below.

PF: num of VFs is provided by enabled SR-IOV of itself.
ECPF: num of VFs is provided by enabled SR-IOV from its peer PF. And
      SR-IOV can't be enabled from ECPF itself.

Current driver handles the two cases in different stages and passing
the number of enabled VFs among a large scope of internal functions.
It is usually hard to find out where is the real number of VFs from
due to layers of argument pass-in.

This patch consolidated that number from the entry point of doing
eswitch setup, and maintained a copy so that eswitch functions can
refer to it directly.

Eswitch driver shall always use this number when referring to enabled
number of VFs, don't use other numbers such as from SR-IOV.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:31 -07:00
Bodong Wang
f6455de0b0 net/mlx5: E-Switch, Refactor eswitch SR-IOV interface
Devlink eswitch mode is not necessarily related to SR-IOV, e.g, ECPF
can be at offload mode when SR-IOV is not enabled.

Rename the interface and eswitch mode names to decouple from SR-IOV,
and cleanup eswitch messages accordingly.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00
Bodong Wang
e1d974d03e net/mlx5: Handle host PF vport mac/guid for ECPF
When ECPF is eswitch manager, it has the privilege to query and
configure the mac and node guid of host PF.

While vport number of host PF is 0, the vport command should be
issued with other_vport set in this case as the cmd is issued by
ECPF vport(0xfffe).

Add a specific function to query own vport mac. Low level functions
are used by vport manager to query/modify any vport mac and node guid.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00
Bodong Wang
5f5d2536be net/mlx5: E-Switch, Use correct flags when configuring vlan
Before the offending commit, vlan will be configured if either vlan
or qos is set. After the change with new set flags, function callers
should provide flags accordingly.

Fixes: e33dfe316c ("net/mlx5: E-Switch, Allow fine tuning of eswitch vport push/pop vlan")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00
Parav Pandit
d886aba677 net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs
While enabling SR-IOV, PCI core already checks that if SR-IOV is already
enabled, it returns failure error code.
Hence, remove such duplicate check from mlx5_core driver.

While at it, make mlx5_device_disable_sriov() to perform cleanup of VFs in
reverse order of mlx5_device_enable_sriov().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00
Bodong Wang
5ccf2770e8 net/mlx5: Don't handle VF func change if host PF is disabled
When ECPF eswitch manager is at offloads mode, it monitors functions
changed event from host PF side and acts according to the number of
VFs enabled/disabled.

As ECPF and host PF work in two independent hosts, it's possible that
host PF OS reboots but ECPF system is still kept on and continues
monitoring events from host PF. When kernel from host PF side is
booting, PCI iov driver does sriov_init and compute_max_vf_buses by
iterating over all valid num of VFs. This triggers FLR and generates
functions changed events, even though host PF HCA is not enabled at
this time. However, ECPF is not aware of this information, and still
handles these events as usual. ECPF system will see massive number of
reps are created, but destroyed immediately once creation finished.

To eliminate this noise, a bit is added to host parameter context to
indicate host PF is disabled. ECPF will not handle the VF changed
event if this bit is set.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00
Parav Pandit
7e26dac281 net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices
As mlx5_get_next_phys_dev is used only for PCI PF devices use case,
limit it to search only for PCI devices.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00
Parav Pandit
d22663edac net/mlx5: Move pci status reg access mutex to mlx5_pci_init
mlx5_pci_init() performs pci specific initialization of the
mlx5_core_dev struct.
Hence move pci_status_mutex to pci initialization routine
mlx5_pci_init().
This allows reusing mlx5_mdev_init() to non PCI devices.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00
Huy Nguyen
386e75af99 net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type
Rename mlx5_pci_dev_type to mlx5_coredev_type to distinguish different mlx5
device types.

mlx5_coredev_type represents mlx5_core_dev instance type. Hence keep
mlx5_coredev_type in mlx5_core_dev structure.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01 16:40:30 -07:00