Commit graph

982,081 commits

Author SHA1 Message Date
Kevin Mitchell
5c90501a72 iommu/amd: Only free resources once on init error
When amd_iommu=off was specified on the command line, free_X_resources
functions were called immediately after early_amd_iommu_init. They were
then called again when amd_iommu_init also failed (as expected).

Instead, call them only once: at the end of state_next() whenever
there's an error. These functions should be safe to call any time and
any number of times. However, since state_next is never called again in
an error state, the cleanup will only ever be run once.

This also ensures that cleanup code is run as soon as possible after an
error is detected rather than waiting for amd_iommu_init() to be called.

Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01 14:03:07 +02:00
Kevin Mitchell
bf4bff46ea iommu/amd: Move gart fallback to amd_iommu_init
The fallback to the GART driver in the case amd_iommu doesn't work was
executed in a function called free_iommu_resources, which didn't really
make sense. This was even being called twice if amd_iommu=off was
specified on the command line.

The only complication is that it needs to be verified that amd_iommu has
fully relinquished control by calling free_iommu_resources and emptying
the amd_iommu_list.

Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01 14:03:07 +02:00
Imre Deak
24a7bfe0c2 drm/i915: Keep the TypeC port mode fixed when the port is active
The TypeC port mode needs to stay fixed whenever the port is active. Do
that by introducing a tc_link_refcount to account for active ports,
avoiding changing the port mode if a reference is held.

During the modeset commit phase we also have to reset the port mode and
update the active PLL reflecting the new port mode. We can do this only
once the port and its old PLL has been already disabled. Add the new
encoder update_prepare/complete hooks that are called around the whole
enabling sequence. The TypeC specific hooks of these will reset the port
mode, update the active PLL if the port will be active and ensure that
the port mode will stay fixed for the duration of the whole enabling
sequence by holding a tc_link_refcount.

During the port enabling, the pre_pll_enable/post_pll_disable hooks will
take/release a tc_link_refcount to ensure the port mode stays fixed
while the port is active.

Changing the port mode should also be avoided during connector detection
and AUX transfers if the port is active, we'll do that by checking the
port's tc_link_refcount.

When resetting the port mode we also have to take into account the
maximum lanes provided by the FIA. It's guaranteed to be 4 in TBT-alt
and legacy modes, but there may be less lanes available in DP-alt mode,
in which case we have to fall back to TBT-alt mode.

While at it also update icl_tc_phy_connect()'s code comment, reflecting
the current way of switching the port mode.

v2:
- Add the update_prepare/complete hooks to the encoder instead of the
  connector. (Ville)
- Simplify intel_connector_needs_modeset() by removing redundant if.
  (Ville)
v3:
- Fix sparse warning, marking static functions as such.
v4:
- Rebase on drm-tip.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-21-imre.deak@intel.com
2019-07-01 15:02:34 +03:00
Kevin Mitchell
3ddbe913e5 iommu/amd: Make iommu_disable safer
Make it safe to call iommu_disable during early init error conditions
before mmio_base is set, but after the struct amd_iommu has been added
to the amd_iommu_list. For example, this happens if firmware fails to
fill in mmio_phys in the ACPI table leading to a NULL pointer
dereference in iommu_feature_disable.

Fixes: 2c0ae1720c ('iommu/amd: Convert iommu initialization to state machine')
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-01 14:02:33 +02:00
Imre Deak
eea72c4c21 drm/i915/icl: Reserve all required PLLs for TypeC ports
When enabling a TypeC port we need to reserve all the required PLLs for
it, the TBT PLL for TBT-alt and the MG PHY PLL for DP-alt/legacy sinks.
We can select the proper PLL for the current port mode from the reserved
PLLs only once we selected and locked down the port mode for the whole
duration of the port's active state. Resetting and locking down the port
mode can in turn happen only during the modeset commit phase once we
disabled the given port and the PLL it used.

To support the above reserve-and-select PLL semantic we store the
reserved PLLs along with their HW state in the CRTC state and provide a
way to select the active PLL from these. The selected PLL along with its
HW state will be pointed at by crtc_state->shared_dpll/dpll_hw_state as
in the case of other port types.

Besides reserving all required PLLs no functional changes.

v2:
- Fix releasing the ICL PLLs, not clearing the PLLs from the old
  crtc_state.
- Init port_dpll to ICL_PORT_DPLL_DEFAULT closer to where port_dpll is
  used for symmetry with the corresponding ICL_PORT_DPLL_MG_PHY init.
  (Ville)
v3:
- Add FIXME: for clearing the ICL port PLLs from the new crtc state.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-20-imre.deak@intel.com
2019-07-01 14:58:01 +03:00
Imre Deak
726ca99666 drm/i915/icl: Split getting the DPLLs to port type specific functions
For clarity factor out the combo PHY and TypeC PHY specific code from
icl_get_dplls() into their own functions.

No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-19-imre.deak@intel.com
2019-07-01 14:57:58 +03:00
Imre Deak
01b24f50b6 drm/i915: Sanitize the shared DPLL find/reference interface
Pass the PLL HW state to the PLL find/reference functions making it
clearer what is their input. Also pass to these the atomic state and the
CRTC object instead of the CRTC state, since they don't require the
latter.

Move setting the PLL in the crtc_state to the get_dpll() hook, which
is the more logical place for this, where the related PLL HW state was also
set.

This refactoring is also a preparation for a follow-up patch that will
have to find/reference multiple PLLs.

No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-18-imre.deak@intel.com
2019-07-01 14:57:42 +03:00
Imre Deak
866955fa45 drm/i915: Sanitize the shared DPLL reserve/release interface
For consistency s/intel_get_shared_dpll()/intel_reserve_shared_dplls()/
to better match intel_release_shared_dplls(). Also, pass to the
reserve/release and get_dplls/put_dplls hooks the intel_atomic_state and
CRTC object, that way these functions can look up the old or new state
as needed.

Also release the PLLs from the atomic state via a new
put_dplls->intel_unreference_shared_dpll() call chain for better
symmetry with the reservation via the
get_dplls->intel_reference_shared_dpll() call chain.

Since nothing uses the PLL returned by intel_reserve_shared_dplls(),
make it return only a bool.

While at it also clarify the reserve/release function docbook headers
making it clear that multiple DPLLs will be reserved/released and
whether the new or old atomic CRTC state is affected.

This refactoring is also a preparation for a follow-up change that needs
to reserve multiple DPLLs.

Kudos to Ville for the idea to pass intel_atomic_state around, to make
things clearer locally where an object's old/new atomic state is
required.

No functional changes.

v2:
- Fix checkpatch issue: typo in code comment.
v3:
- Rebase on drm-tip.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-17-imre.deak@intel.com
2019-07-01 14:54:18 +03:00
Imre Deak
4f36afb26c drm/i915: Sanitize the TypeC FIA lane configuration decoding
Use hex numbers, since that makes more sense when decoding a bit pattern.

No functional change.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-16-imre.deak@intel.com
2019-07-01 14:50:32 +03:00
Imre Deak
8c10e22626 drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers
We must keep the TypeC port mode fixed for the duration of the connector
detection and each AUX transfers. Add a new TypeC lock holding it around
these two sequences. For consistency also hold the lock during the port
mode sanitization.

Whenever resetting the port mode (only during the detection for now) the
port's AUX power domain must be disabled already. Flush the async power
domain disabling work to ensure this.

A follow-up patch will make the port mode changing more robust by
postponing the change for active ports.

v2:
- Fix checkpatch issue: missing annotation for tc_lock.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-15-imre.deak@intel.com
2019-07-01 14:50:29 +03:00
Imre Deak
32691b58d1 drm/i915: Fix the TypeC port mode sanitization during loading/resume
For using the correct AUX power domains we have to sanitize the TypeC
port mode early, so move that before encoder sanitization. To do this
properly read out the actual port mode instead of just relying on the
VBT legacy port flag (which can be incorrect).

We also verify that the PHY is connected as expected if the port is
active. In case the port is inactive we connect the PHY in case of a
legacy port - as we did so far. The PHY will be connected during
detection for DP-alt mode - as it was done so far. For TBT-alt mode
nothing needs to be done to connect the PHY.

v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Detect TCCOLD any time PORT_TX_DFLEXDPCSSS is read. (Ville)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-14-imre.deak@intel.com
2019-07-01 14:50:25 +03:00
Imre Deak
1cd5ef6ee2 drm/i915: Sanitize the TypeC connect/detect sequences
Make the order during detection more consistent: first reset the TypeC
port mode if needed (adding new helpers for this), then detect any
connected sink.

To check if a port mode reset is needed determine first the target port
mode based on the live status if a sink is already connected or the
PHY status complete flag otherwise.

Add a WARN in legacy mode if unexpectedly we can't set the unsafe mode
or if the FIA doesn't provide the 4 lanes required.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-13-imre.deak@intel.com
2019-07-01 14:50:23 +03:00
Imre Deak
424f109f5c drm/i915: Handle the TCCOLD power-down event
Based on a recent BSpec update (Index/21750) we must handle the TCCOLD
event associated with the DP-alt mode. We can detect this event by
reading an invalid all-1s value from FIA registers.

After detecting TCCOLD we will:
- fall back to TBT-alt mode when attempting to switch to DP-alt mode
- conclude that nothing is connected during live status detection
- WARN when already in unsafe mode, since then TCCOLD is unexpected

v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Use 0xffffffff instead of -1 as invalid FIA reg value.
  (José, Ville)
- Check for TCCOLD in icl_tc_phy_status_complete() too. (Ville)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-12-imre.deak@intel.com
2019-07-01 14:50:20 +03:00
Imre Deak
ddec362724 drm/i915: Wait for TypeC PHY complete flag to clear in safe mode
The PHY status complete flag normally clears when disconnecting the PHY
in DP-alt mode (achieved by switching to safe mode), so wait for the
flag to clear.

v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-11-imre.deak@intel.com
2019-07-01 14:50:16 +03:00
Imre Deak
c905eb28bd drm/i915: Factor out common parts from TypeC port handling functions
Factor out helpers reading/parsing the TypeC specific registers, making
current users of them clearer and letting us use them later.

While at it also:
- Simplify icl_tc_phy_connect() with an early return in legacy mode.
- Simplify the live status check using one bitmask for all HPD bits.
- Remove a micro-optimisation of the repeated safe-mode clearing.
- Make sure we fix the legacy port flag in all cases.

Except for the last two, no functional changes.

v2:
- Don't do reg reads at variable declarations. (Jani)
- Prevent constant truncated compiler warning when assigning the
  valid_hpd_mask. (Nick)
- s/intel_tc_port_get_lane_info/intel_tc_port_get_lane_mask/ (Ville)
v3:
- Make valid_hpd_mask init clear. (Ville)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-10-imre.deak@intel.com
2019-07-01 14:50:12 +03:00
Imre Deak
ab7bc4e1a5 drm/i915: Unify the TypeC port notation in debug/error messages
Unify the TypeC port notation in log messages, so that it matches the
spec. For instance the first ICL TypeC port will read as 'Port C/TC#1'.

v2:
- Format print the name only once. (José)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-9-imre.deak@intel.com
2019-07-01 14:50:08 +03:00
Imre Deak
dd7239c545 drm/i915: Use the correct AUX power domain in TypeC TBT-alt mode
In the TypeC TBT-alt port mode we must use the TBT AUX power domain,
fix that.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-8-imre.deak@intel.com
2019-07-01 14:50:03 +03:00
Imre Deak
29ae36abf0 drm/i915: Fix the TBT AUX power well enabling
Fix the mapping from a TBT AUX power well index to the DP_AUX_CH_CTL
register.

Fixes: c7375d9542 ("drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-7-imre.deak@intel.com
2019-07-01 14:50:01 +03:00
Imre Deak
3b2ed43134 drm/i915: Don't enable the DDI-IO power in the TypeC TBT-alt mode
According to the spec we should not enable the DDI-IO power domain if
the TypeC port is in the TBT-alt mode, so do that only in the other
TypeC modes or for non-TypeC ports. See the internal BSpec Index/22243.

v2:
- Add the internal BSpec reference to the log message. (José)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-6-imre.deak@intel.com
2019-07-01 14:49:58 +03:00
Imre Deak
e9b7e1422d drm/i915: Sanitize the terminology used for TypeC port modes
The TypeC port mode can switch dynamically, to reflect that better call
the port's mode as 'mode' rather than 'type'.

While at it:
- s/TC_PORT_TBT/TC_PORT_TBT_ALT/ and s/TC_PORT_TYPEC/TC_PORT_DP_ALT/.
  'TYPEC' is ambiguous, TBT_ALT and DP_ALT better match the reality.

- Remove the 'unknown' TypeC port mode. The mode is always known, it's
  the TBT-alt/safe mode after HW reset and after disconnecting the PHY.
  Simplify the tc_port/tc_type checks accordingly.

- Don't WARN if the port mode changes, that can happen normally.

No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-5-imre.deak@intel.com
2019-07-01 14:49:40 +03:00
Imre Deak
bc85328ff4 drm/i915: Move the TypeC port handling code to a separate file
Move the TypeC port handling functions to a new file for clarity.

While at it:
- s/icl_tc_port_connected()/intel_tc_port_connected()/
  icl_tc_phy_disconnect(), will be unexported later.

- s/intel_dp_get_fia_supported_lane_count()/
    intel_tc_port_fia_max_lane_count()/
  It's used for HDMI legacy mode too.

- Simplify function interfaces by passing only dig_port to them.

No functional changes.

v2:
- Fix checkpatch issues: +1/-1 empty lines in intel_tc.c and add
  missing SPDX to intel_tc.h. (Jani)

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-4-imre.deak@intel.com
2019-07-01 14:48:46 +03:00
Imre Deak
2821232162 drm/i915: Tune down WARNs about TBT AUX power well enabling
The HW completion flag for the TBT AUX power well enabling/disabling
gets stuck if the firmware tears down the TBT DP tunnel before the
completion.

We shouldn't complain about the timeout, since it's expected to happen
and doesn't cause further issues. We suppress the disabling timeout
already, do the same for enabling.

v2:
- Make the debug message more precise. (José)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-3-imre.deak@intel.com
2019-07-01 14:48:45 +03:00
Imre Deak
39a5883f86 drm/i915/icl: Add support to read out the TBT PLL HW state
Add support to read out the TBT PLL HW state.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-2-imre.deak@intel.com
2019-07-01 14:48:45 +03:00
Joerg Roedel
39debdc1d7 Merge branch 'for-joerg/arm-smmu/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu 2019-07-01 13:44:41 +02:00
David Sterba
93ead46b03 btrfs: tests: add locks around add_extent_mapping
There are no concerns about locking during the selftests so the locks
are not necessary, but following patches will add lockdep assertions to
add_extent_mapping so this is needed in tests too.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:03 +02:00
Nikolay Borisov
8666e638b0 btrfs: Document __etree_search
The function has a lot of return values and specific conventions making
it cumbersome to understand what's returned. Have a go at documenting
its parameters and return values.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:03 +02:00
Nikolay Borisov
1eaebb341d btrfs: Don't trim returned range based on input value in find_first_clear_extent_bit
Currently find_first_clear_extent_bit always returns a range whose
starting value is >= passed 'start'. This implicit trimming behavior is
somewhat subtle and an implementation detail.

Instead, this patch modifies the function such that now it always
returns the range which contains passed 'start' and has the given bits
unset. This range could either be due to presence of existing records
which contains 'start' but have the bits unset or because there are no
records that contain the given starting offset.

This patch also adds test cases which cover find_first_clear_extent_bit
since they were missing up until now.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:02 +02:00
Nikolay Borisov
53460a4572 btrfs: trim: make reserved device area adjustments more explicit
Currently the first megabyte on a device housing a btrfs filesystem is
exempt from allocation and trimming. Currently this is not a problem
since 'start' is set to 1M at the beginning of btrfs_trim_free_extents
and find_first_clear_extent_bit always returns a range that is >= start.

However, in a follow up patch find_first_clear_extent_bit will be
changed such that it will return a range containing 'start' and this
range may very well be 0...>=1M so 'start'.

Future proof the sole user of find_first_clear_extent_bit by setting
'start' after the function is called. No functional changes.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:02 +02:00
David Sterba
6f8e4fd430 btrfs: use file:line format for assertion report
The filename:line format is commonly understood by editors and can be
copy&pasted more easily than the current format.

Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:02 +02:00
Johannes Thumshirn
ea41d6b278 btrfs: remove assumption about csum type form btrfs_print_data_csum_error()
btrfs_print_data_csum_error() still assumed checksums to be 32 bit in
size.  Make it size agnostic.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:02 +02:00
Johannes Thumshirn
d5178578bc btrfs: directly call into crypto framework for checksumming
Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.

As we have our own crypto_shash structure in the fs_info now, we can
directly call into the crypto framework without going trough the wrapper.

This way we can even remove the btrfs_csum_data() and btrfs_csum_final()
wrappers.

The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre:
crc32c"), which was previously provided by LIBCRC32C config option doing
the same.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:02 +02:00
Johannes Thumshirn
6d97c6e31b btrfs: add boilerplate code for directly including the crypto framework
Add boilerplate code for directly including the crypto framework.  This
helps us flipping the switch for new algorithms.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:01 +02:00
Johannes Thumshirn
51bce6c9b9 btrfs: Simplify btrfs_check_super_csum() and get rid of size assumptions
Now that we have already checked for a valid checksum type before
calling btrfs_check_super_csum(), it can be simplified even further.

While at it get rid of the implicit size assumption of the resulting
checksum as well.

This is a preparation for changing all checksum functionality to use the
crypto layer later.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:01 +02:00
Johannes Thumshirn
8dc3f22c8b btrfs: check for supported superblock checksum type before checksum validation
Now that we have factorerd out the superblock checksum type validation,
we can check for supported superblock checksum types before doing the
actual validation of the superblock read from disk.

This leads the path to further simplifications of
btrfs_check_super_csum() later on.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:01 +02:00
Johannes Thumshirn
e7e16f4882 btrfs: add common checksum type validation
Currently btrfs is only supporting CRC32C as checksumming algorithm. As
this is about to change provide a function to validate the checksum type
in the superblock against all possible algorithms.

This makes adding new algorithms easier as there are fewer places to
adjust when adding new algorithms.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:01 +02:00
Johannes Thumshirn
7ebc7e5f2c btrfs: format checksums according to type for printing
Add a small helper for btrfs_print_data_csum_error() which formats the
checksum according to it's type for pretty printing.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ shorten macro name ]
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:01 +02:00
Johannes Thumshirn
10fe6ca80d btrfs: don't assume compressed_bio sums to be 4 bytes
BTRFS has the implicit assumption that a checksum in compressed_bio is 4
bytes. While this is true for CRC32C, it is not for any other checksum.

Change the data type to be a byte array and adjust loop index calculation
accordingly.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:01 +02:00
Johannes Thumshirn
1e25a2e3ca btrfs: don't assume ordered sums to be 4 bytes
BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.

Change the data type to be a byte array and adjust loop index
calculation accordingly.

This includes moving the adjustment of 'index' by 'ins_size' in
btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum
size, because before this patch the 'sums' member of 'struct
btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one
byte.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:00 +02:00
Johannes Thumshirn
4bb3c2e2b5 btrfs: use btrfs_crc32c{,_final}() in for free space cache
The CRC checksum in the free space cache is not dependant on the super
block's csum_type field but always a CRC32C.

So use btrfs_crc32c() and btrfs_crc32c_final() instead of
btrfs_csum_data() and btrfs_csum_final() for computing these checksums.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:00 +02:00
Johannes Thumshirn
65019df8c3 btrfs: resurrect btrfs_crc32c()
Commit 9678c54388 ("btrfs: Remove custom crc32c init code") removed
the btrfs_crc32c() function, because it was a duplicate of the crc32c()
library function we already have in the kernel.

Resurrect it as a shim wrapper over crc32c() to make following
transformations of the checksumming code in btrfs easier.

Also provide a btrfs_crc32_final() to ease following transformations.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:00 +02:00
Johannes Thumshirn
5852c8b961 btrfs: use btrfs_csum_data() instead of directly calling crc32c
btrfsic_test_for_metadata() directly calls the crc32c() library function
for calculating the CRC32C checksum, but then uses btrfs_csum_final() to
invert the result.

To ease further refactoring and development around checksumming in BTRFS
convert to calling btrfs_csum_data(), which is a wrapper around
crc32c().

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:00 +02:00
Qu Wenruo
a94d1d0cb3 btrfs: Flush before reflinking any extent to prevent NOCOW write falling back to COW without data reservation
[BUG]
The following script can cause unexpected fsync failure:

  #!/bin/bash

  dev=/dev/test/test
  mnt=/mnt/btrfs

  mkfs.btrfs -f $dev -b 512M > /dev/null
  mount $dev $mnt -o nospace_cache

  # Prealloc one extent
  xfs_io -f -c "falloc 8k 64m" $mnt/file1
  # Fill the remaining data space
  xfs_io -f -c "pwrite 0 -b 4k 512M" $mnt/padding
  sync

  # Write into the prealloc extent
  xfs_io -c "pwrite 1m 16m" $mnt/file1

  # Reflink then fsync, fsync would fail due to ENOSPC
  xfs_io -c "reflink $mnt/file1 8k 0 4k" -c "fsync" $mnt/file1
  umount $dev

The fsync fails with ENOSPC, and the last page of the buffered write is
lost.

[CAUSE]
This is caused by:
- Btrfs' back reference only has extent level granularity
  So write into shared extent must be COWed even only part of the extent
  is shared.

So for above script we have:
- fallocate
  Create a preallocated extent where we can do NOCOW write.

- fill all the remaining data and unallocated space

- buffered write into preallocated space
  As we have not enough space available for data and the extent is not
  shared (yet) we fall into NOCOW mode.

- reflink
  Now part of the large preallocated extent is shared, later write
  into that extent must be COWed.

- fsync triggers writeback
  But now the extent is shared and therefore we must fallback into COW
  mode, which fails with ENOSPC since there's not enough space to
  allocate data extents.

[WORKAROUND]
The workaround is to ensure any buffered write in the related extents
(not just the reflink source range) get flushed before reflink/dedupe,
so that NOCOW writes succeed that happened before reflinking succeed.

The workaround is expensive, we could do it better by only flushing
NOCOW range, but that needs extra accounting for NOCOW range.
For now, fix the possible data loss first.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:35:00 +02:00
Nikolay Borisov
5f791ec31f btrfs: Return EAGAIN if we can't start no snpashot write in check_can_nocow
The first thing code does in check_can_nocow is trying to block
concurrent snapshots. If this fails (due to snpashot already being in
progress) the function returns ENOSPC which makes no sense. Instead
return EAGAIN. Despite this return value not being propagated to callers
it's good practice to return the closest in terms of semantics error
code. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:59 +02:00
Nikolay Borisov
0b6f5d408b btrfs: Add comments on locking of several device-related fields
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:59 +02:00
Nikolay Borisov
bd80d94efb btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range
In case no cached_state argument is passed to
btrfs_lock_and_flush_ordered_range use one locally in the function. This
optimises the case when an ordered extent is found since the unlock
function will be able to unlock that state directly without searching
for it again.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:59 +02:00
Nikolay Borisov
23d31bd476 btrfs: Use newly introduced btrfs_lock_and_flush_ordered_range
There several functions which open code
btrfs_lock_and_flush_ordered_range, just replace them with a call to the
function. No functional changes.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:59 +02:00
Nikolay Borisov
ffa87214c1 btrfs: add new helper btrfs_lock_and_flush_ordered_range
There is a certain idiom used in multiple places in btrfs' codebase,
dealing with flushing an ordered range. Factor this in a separate
function that can be reused. Future patches will replace the existing
code with that function.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:59 +02:00
Qu Wenruo
1200b51f57 btrfs: remove the incorrect comment on RO fs when btrfs_run_delalloc_range() fails
At the context of btrfs_run_delalloc_range(), we haven't started/joined
a transaction, thus even something went wrong, we can't and won't abort
transaction, thus no way to make the fs RO.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:59 +02:00
Qu Wenruo
480b9b4d84 btrfs: extent-tree: Add trace events for space info numbers update
Add trace event for update_bytes_pinned() and update_bytes_may_use() to
detect underflow better.

The output would be something like (only showing data part):

  ## Buffered write start, 16K total ##
  2255.954 xfs_io/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=4096
  2257.169 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=4096 diff=4096
  2257.346 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=8192 diff=4096
  2257.542 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=12288 diff=4096

  ## Delalloc start ##
  3727.853 kworker/u8:3-e/700 btrfs:update_bytes_may_use:(nil)U: type=DATA old=16384 diff=-16384

  ## Space cache update ##
  3733.132 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=65536
  3733.169 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=65536 diff=-65536
  3739.868 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=65536
  3739.891 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=65536 diff=-65536

These two trace events will allow bcc tool to probe btrfs_space_info
changes and detect underflow with more details (e.g. backtrace for each
update).

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:58 +02:00
Qu Wenruo
0185f364cb btrfs: extent-tree: Add lockdep assert when updating space info
Just add a safe net for btrfs_space_info member updating.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-01 13:34:58 +02:00