That's purely for the uapi layer to implement the ALLOW_MODESET flag.
Drivers should instead look at the state, e.g. through
drm_atomic_crtc_needs_modeset(), which vmwgfx already does. Also remove
the confusing comment, since checking allow_modeset is at best a micro
optimization.
v2: Rebase
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190520223500.6032-1-daniel.vetter@ffwll.ch
* 1<<31 is undefined, use 1U<<31 in nl80211.h UAPI
-----BEGIN PGP SIGNATURE-----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=D1WG
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a single patch:
* 1<<31 is undefined, use 1U<<31 in nl80211.h UAPI
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- bump version strings, by Simon Wunderlich
- fix includes for _MAX constants, atomic functions and fwdecls,
by Sven Eckelmann (3 patches)
- shorten multicast tt/tvlv worker spinlock section, by Linus Luessing
- routeable multicast preparations: implement MAC multicast filtering,
by Linus Luessing (2 patches, David Millers comments integrated)
- remove return value checks for debugfs_create, by Greg Kroah-Hartman
- add routable multicast optimizations, by Linus Luessing (2 patches)
-----BEGIN PGP SIGNATURE-----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=nP3L
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20190627v2' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- fix includes for _MAX constants, atomic functions and fwdecls,
by Sven Eckelmann (3 patches)
- shorten multicast tt/tvlv worker spinlock section, by Linus Luessing
- routeable multicast preparations: implement MAC multicast filtering,
by Linus Luessing (2 patches, David Millers comments integrated)
- remove return value checks for debugfs_create, by Greg Kroah-Hartman
- add routable multicast optimizations, by Linus Luessing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix a leaked TVLV handler which wasn't unregistered, by Jeremy Sowden
- fix duplicated OGMs when interfaces are set UP, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=TqkI
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20190627' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix a leaked TVLV handler which wasn't unregistered, by Jeremy Sowden
- fix duplicated OGMs when interfaces are set UP, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: some code optimizations & cleanups & bugfixes
[patch 01/12] fixes a TX timeout issue.
[patch 02/12 - 04/12] adds some patch related to TM module.
[patch 05/12] fixes a compile warning.
[patch 06/12] adds Asym Pause support for autoneg
[patch 07/12] optimizes the error handler for VF reset.
[patch 08/12] deals with the empty interrupt case.
[patch 09/12 - 12/12] adds some cleanups & optimizations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If CMDQ ring is full, hclge_cmd_send may return directly, but IMP still
working and HW pointer changed, SW ring pointer do not match the HW
pointer. This patch update the SW pointer every time when the space is
full, so it can work normally next time if IMP and HW still working.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HNS3_RXD_VLD_B bit has already been checked in hns3_add_frag
or hns3_handle_rx_bd before calling hns3_handle_bdinfo, so when
hns3_handle_bdinfo is called, the HNS3_RXD_VLD_B bit is always
set, which makes the checking in hns3_handle_bdinfo unnecessary.
This patch removes the RXD_VLD_B checking in hns3_handle_bdinfo.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes unused linkmode definition.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The frame column is based on rx_crc_errors and rx_frame_errors. So
l3l4 checksum error should not be counted by rx_crc_errors. Instead,
l3l4 checksum error should be counted in ifconfig error column.
Fixes: d3ec4ef669 ("net: hns3: refactor the statistics updating for netdev")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since some MSI-X interrupt's status may be cleared by hardware,
so when the driver receives the interrupt, reading
HCLGE_VECTOR0_PF_OTHER_INT_STS_REG register will get an empty
unknown interrupt. For this case, the irq handler should enable
vector0 interrupt. This patch also use dev_info() instead of
dev_dbg() in the hclge_check_event_cause(), since this information
will be useful for normal usage.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VF reset may fail for some probabilistic reasons,
such as wait for hardware reset timeout, wait for mailbox
response timeout, so this patch tries to re-schedule the
reset task when the number of reset failing is under
HCLGEVF_RESET_MAX_FAIL_CNT. This patch also add a function
hclgevf_reset_err_handle() to handle the reset failing.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Local device and link partner config auto-negotiation on both,
local device config pause frame use as: rx on/tx off,
link partner config pause frame use as: rx off/tx on.
We except the result is:
Local device:
Autonegotiate: on
RX: on
TX: off
RX negotiated: on
TX negotiated: off
Link partner:
Autonegotiate: on
RX: off
TX: on
RX negotiated: off
TX negotiated: on
But actually, the result of Local device and link partner is both:
Autonegotiate: on
RX: off
TX: off
RX negotiated: off
TX negotiated: off
The root cause is that the supported flag is has only Pause,
reference to the function genphy_config_advert():
static int genphy_config_advert(struct phy_device *phydev)
{
...
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
...
}
The pause frame use of link partner is rx off/tx on, so its
advertising only set the bit Asym_Pause, and the supported is
only set the bit Pause, so the result of linkmode_and(), is
rx off/tx off.
This patch adds Asym_Pause to the supported flag to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting -Wformat=2, there is a compiler warning like this:
hclge_main.c:xxx:x: warning: format not a string literal and no
format arguments [-Wformat-nonliteral]
strs[i].desc);
^~~~
This patch adds missing format parameter "%s" to snprintf() to
fix it.
Fixes: 46a3df9f97 ("Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the
hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg
with vport->vport_id as pri_id, which is used as index for
hdev->tm_info.tc_info, it will cause out of bound access issue
if vport_id is equal to or larger than HNAE3_MAX_TC.
Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE.
So this patch adds two checks for above cases.
Fixes: 848440544b ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when there is share buffer in the SSU(storage
switching unit), the low waterline for RX private buffer is
too low to keep the hardware running. Hardware may have
processed all the packet stored in the private buffer of the
low waterline before the new packet comes, because hardware
only tell the peer send packet again when the private buffer
is under the low waterline.
So this patch only allocate RX private buffer if there is
enough buffer according to hardware user manual.
This patch also reserve some buffer for reusing when TC num
is less than or equal to 2, and change PAUSE_TRANS_GAP &
HCLGE_NON_DCB_ADDITIONAL_BUF according to hardware user
manual.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when TC num is one, the DCB will be disabled no matter if
pfc_en is non-zero or not.
This patch enables the DCB if pfc_en is non-zero, even when TC num
is one.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When change MTU or other operations, which just calling .reset_notify
to do HNAE3_DOWN_CLIENT and HNAE3_UP_CLIENT, then
the netdev_tx_reset_queue() in the hns3_clear_all_ring() will be
ignored. So the dev_watchdog() may misdiagnose a TX timeout.
This patch separates netdev_tx_reset_queue() from
hns3_clear_all_ring(), and unifies hns3_clear_all_ring() and
hns3_force_clear_all_ring into one, since they are doing
similar things.
Fixes: 3a30964a2e ("net: hns3: delay ring buffer clearing during reset")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Better PHYLINK compliance for SJA1105 DSA
After discussing with Russell King, it appears this driver is making a
few confusions and not performing some checks for consistent operation.
Changes in v2:
- Removed redundant print in the phylink_validate callback (in 2/3).
====================
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need a better way to signal this, perhaps in phylink_validate, but
for now just print this error message as guidance for other people
looking at this driver's code while trying to rework PHYLINK.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHYLINK being designed with PHYs in mind that can change MII protocol,
for correct operation it is necessary to ensure that the PHY interface
mode stays the same (otherwise clear the supported bit mask, as
required).
Because this is just a hypothetical situation for now, we don't bother
to check whether we could actually support the new PHY interface mode.
Actually we could modify the xMII table, reset the switch and send an
updated static configuration, but adding that would just be dead code.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been pointed out that PHYLINK can call mac_config only to update
the phy_interface_type and without knowing what the AN results are.
Experimentally, when this was observed to happen, state->link was also
unset, and therefore was used as a proxy to ignore this call. However it
is also suggested that state->link is undefined for this callback and
should not be relied upon.
So let the previously-dead codepath for SPEED_UNKNOWN be called, and
update the comment to make sure the MAC's behavior is sane.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On 32-bit architectures, putting an array of 256 u32 values on the
stack uses more space than the warning limit:
drivers/net/ethernet/huawei/hinic/hinic_main.c: In function 'hinic_rss_init':
drivers/net/ethernet/huawei/hinic/hinic_main.c:286:1: error: the frame size of 1068 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
I considered changing the code to use u8 values here, since that's
all the hardware supports, but dynamically allocating the array is
a more isolated fix here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu says:
====================
net: stmmac: 10GbE using XGMAC
Support for 10Gb Link using XGMAC core plus some performance tweaks.
Tested in a PCI based setup.
iperf3 TCP results:
TSO ON, MTU=1500, TX Queues = 1, RX Queues = 1, Flow Control ON
Pinned CPU (-A), Zero-Copy (-Z)
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-600.00 sec 643 GBytes 9.21 Gbits/sec 1 sender
[ 5] 0.00-600.00 sec 643 GBytes 9.21 Gbits/sec receiver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We support more speeds now. Update the Kconfig entry.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only disable the interrupts if RX NAPI gets to be scheduled. Also,
schedule the TX NAPI only when the interrupts are disabled.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the RX Tail Pointer to the last available SKB entry.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, stmmac only supports 32 bits addressing for SKB. Enable the
support for upto 48 bits addressing in XGMAC core.
This avoids the use of bounce buffers and increases performance.
Changes from v1:
- Fallback to 32 bits in failure (Andrew)
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a performance killer and anyways the interrupts are being
disabled by RX NAPI so no need to disable them again.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XGMAC supports following speeds:
- 10G XGMII
- 5G XGMII
- 2.5G XGMII
- 2.5G GMII
- 1G GMII
- 100M MII
- 10M MII
Add them to the stmmac driver.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Undefined burst shall only be set if pdata asks to.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For performance reasons decrease the default RX Watchdog value for the
minimum allowed.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not enable EEE feature in the PHY if MAC does not support it.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable the EDMA feature by default which gives higher performance.
Changes from v1:
- Do not use magic values (David)
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some DT bindings do not have the PHY handle. Let's fallback to manually
discovery in case phylink_of_phy_connect() fails.
Changes from v1:
- Fixup comment style (Sergei)
Fixes: 74371272f9 ("net: stmmac: Convert to phylink and remove phylib logic")
Reported-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hopefully the last set of fixes for 5.2. Nothing special this around,
only small fixes and support for new cards.
iwlwifi
* add new cards for 22000 series and smaller fixes
wl18xx
* fix a clang warning about unused variables
mwifiex
* properly handle small vendor IEs (a regression from the recent
security fix)
ath
* fix few SPDX tags
mt76
* fix A-MSDU aggregation which got broken in v5.2-rc1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdFb43AAoJEG4XJFUm622bQyUH+wbr8/3mo1IQdz5Vm/UoK0P6
SyG0I94sNPRfvPBQF9CNV8/958Yg+OMLJ8pHpqsvx6qdjyCy6C0G8Oi9qlqbmcQ6
vT5XY2FODm/+AkmSpdjPnG9Ye77luwJ66Egkk5uTUwDHirMhiD4IaoszRwoTHce8
o8Wu5UZ2SXwkUDnrRJmQxR/l8Bqr5QeC/xgxxS1aZEVF9uH+wDECGFCXNrFBRQcI
2W5UZz+1gp4OoV9SemgFrBXdhS/l/shje4svAjLk4rZr+CSU1oQZCgjbkjVBHaiL
R9iLVKq//p+LOiA9Hd5kwQwkTiILRy+mmPvhSAy4eesZEjF+le9vaitpERRfoBQ=
=5q2s
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.2
Hopefully the last set of fixes for 5.2. Nothing special this around,
only small fixes and support for new cards.
iwlwifi
* add new cards for 22000 series and smaller fixes
wl18xx
* fix a clang warning about unused variables
mwifiex
* properly handle small vendor IEs (a regression from the recent
security fix)
ath
* fix few SPDX tags
mt76
* fix A-MSDU aggregation which got broken in v5.2-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a typo where we're confusing the default TCP retrans value
(NFS_DEF_TCP_RETRANS) for the default TCP timeout value.
Fixes: 15d03055cf ("pNFS/flexfiles: Set reasonable default ...")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch allows reading and writing the input voltage and current
limit through the POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT and
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT sysfs properties. This allows
userspace to see current values and to re-configure these values at
runtime based on system-level knowledge or user input.
By default there is no limit, this is reported as a -1 when reading from
userspace. Writing a value will set the current or voltage limit in uA
or uV, and writing any negative value will remove that limit.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
For thermal management strategy you might be interested on limit the
input power for a power supply. We already have current limit but
basically what we probably want is to limit power. So, introduce the
input_power_limit property.
Although the common use case is limit the input power, in some
specific cases it is the voltage that is problematic (i.e some regulators
have different efficiencies at higher voltage resulting in more heat).
So introduce also the input_voltage_limit property.
This happens in one Chromebook and is used on the Pixel C's thermal
management strategy to effectively limit the input power to 5V 3A when
the screen is on. When the screen is on, the display, the CPU, and the GPU
all contribute more heat to the system than while the screen is off, and
we made a tradeoff to throttle the charger in order to give more of the
thermal budget to those other components.
So there's nothing fundamentally broken about the hardware that would
cause the Pixel C to malfunction if we were charging at 9V or 12V instead
of 5V when the screen is on, i.e. if userspace doesn't change this.
What would happen is that you wouldn't meet Google's skin temperature
targets on the system if the charger was allowed to run at 9V or 12V with
the screen on.
For folks hacking on Pixel Cs (which is now outside of Google's official
support window for Android) and customizing their own kernel and userspace
this would be acceptable, but we wanted to expose this feature in the
power supply properties because the feature does exist in the Emedded
Controller firmware of the Pixel C and all of Google's Chromebooks with
USB-C made since 2015 in case someone running an up to date kernel wanted
to limit the charging power for thermal or other reasons.
This patch exposes a new property, similar to input current limit, to
re-configure the maximum voltage from the external supply at runtime
based on system-level knowledge or user input.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In the case where a record marker was used, xs_sendpages() needs
to return the length of the payload + record marker so that we
operate correctly in the case of a partial transmission.
When the callers check return value, they therefore need to
take into account the record marker length.
Fixes: 06b5fc3ad9 ("Merge tag 'nfs-rdma-for-5.1-1'...")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the
second channel is available for use as a serial port.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@unjo.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The UP.rst file calls for locks acquired within RCU callback functions
to use _irq variants (spin_lock_irqsave() or similar), which does work,
but can be overkill. This commit therefore instead calls for _bh variants
(spin_lock_bh() or similar), while noting that _irq does work.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Jiunn Chang <c0d1n61at3@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The current ReStructuredText formatting results in "--", used to
indicate the end of the kernel command-line parameters, appearing as
an en-dash instead of two hyphens; this patch formats them as code,
"``--``", as done elsewhere in the documentation.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
fix the disjunction by replacing "of" with "or".
Signed-off-by: Sheriff Esseson <sheriffesseson@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
On umount step a sigkill signal is set (without user specific
action), due to sigkill signal the completion will be interrupted and
the data transfer can't be finished if a sync is needed.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds description of dma properties (optional).
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 64ee5067cf ("ASoC: soc-utils: remove dummy Platform") removed
dummy Platform from ALSA SoC, but it is over-kill.
This patch respawn it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 961fb3c206 ("ASoC: rockchip: rk3399_gru_sound: don't select
unnecessary Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit 961fb3c206 ("ASoC: rockchip: rk3399_gru_sound: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>