Commit graph

982,081 commits

Author SHA1 Message Date
Lee Jones
a229105d7a pinctrl: qcom: sdm845: Provide ACPI support
This patch provides basic support for booting with ACPI instead
of the currently supported Device Tree.  When doing so there are a
couple of differences which we need to taken into consideration.

Firstly, the SDM850 ACPI tables omit information pertaining to the
4 reserved GPIOs on the platform.  If Linux attempts to touch/
initialise any of these lines, the firmware will restart the
platform.

Secondly, when booting with ACPI, it is expected that the firmware
will set-up things like; Regulators, Clocks, Pin Functions, etc in
their ideal configuration.  Thus, the possible Pin Functions
available to this platform are not advertised when providing the
higher GPIOD/Pinctrl APIs with pin information.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 09:14:00 +02:00
Lee Jones
4c0efbfb26 pinctrl: msm: Add ability for drivers to supply a reserved GPIO list
When booting MSM based platforms with Device Tree or some ACPI
implementations, it is possible to provide a list of reserved pins
via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
However some ACPI tables are not populated with this information,
thus it has to come from a knowledgable device driver instead.

Here we provide the MSM common driver with additional support to
parse this informtion and correctly populate the widely used
'valid_mask'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 09:12:49 +02:00
Youngmin Nam
b314dd49a2 vsprintf: fix data type of variable in string_nocheck()
This patch fixes data type of precision with int.
The precision is declared as signed int in struct printf_spec.

Link: http://lkml.kernel.org/r/040301d51f60$b4959100$1dc0b300$@samsung.com
To: <andriy.shevchenko@linux.intel.com>
To: <geert+renesas@glider.be>
To: <rostedt@goodmis.org>
To: <me@tobin.cc>
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-06-12 09:12:27 +02:00
Masahiro Yamada
78b99577b3 pinctrl: remove unused pin_is_valid()
This function was used by pin_request() to pointlessly double-check
the pin validity, and it was the only user ever.

Since commit d2f6a1c6fb ("pinctrl: remove double pin validity
check."), no one has ever used it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 09:10:54 +02:00
Masahiro Yamada
6cadafb310 pinctrl: remove unneeded initializer for list_for_each_entry() iterator
The iterator is initialized in list_for_each_entry().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12 09:09:51 +02:00
Yannick Fertré
ee7668bc68 drm/stm: dsi: add power on/off phy ops
These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-3-git-send-email-yannick.fertre@st.com
2019-06-12 09:09:18 +02:00
Yannick Fertré
a3e69b86cf drm/bridge/synopsys: dsi: add power on/off optional phy ops
Add power on & off optional physical operation functions, helpful to
program specific registers of the DSI physical part.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-2-git-send-email-yannick.fertre@st.com
2019-06-12 09:09:18 +02:00
Bjorn Andersson
693e824452 arm64: dts: qcom: msm8996: Stop using legacy clock names
MDSS and its friends complain about the DTS is using legacy clock names,
update these to silence the warnings.

Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 23:10:11 -07:00
Niklas Cassel
73db271423 arm64: dts: msm8996: fix PSCI entry-latency-us
The current entry-latency-us is too short.
The proper way to convert between the device tree properties
from the vendor tree to the upstream PSCI device tree properties is:

entry-latency-us = qcom,time-overhead - qcom,latency-us

which gives

entry-latency-us = 210 - 80 = 130

Fixes: f6aee7af59 ("arm64: dts: qcom: msm8996: Add PSCI cpuidle low power states")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 23:10:10 -07:00
Ran Wang
53f2ac9d3a arm64: dts: ls1028a: Fix CPU idle fail.
PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to
indicate CPU State Type: 0 for standby, 1 for power down. In this
case, we want to select standby for CPU idle feature. But current
setting wrongly select power down and cause CPU SUSPEND fail every
time. Need this fix.

Fixes: 8897f3255c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-12 13:46:33 +08:00
Amit Kucheria
c3083c80b5 arm64: dts: qcom: msm8998: Add PSCI cpuidle low power states
Add device bindings for cpuidle states for cpu devices.

[marc: rebase, fix arm,psci-suspend-param, fix entry-latency-us]
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 21:55:48 -07:00
Sibi Sankar
e76c367217 arm64: dts: qcom: sdm845: Add Q6V5 MSS node
This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 21:54:11 -07:00
Bjorn Andersson
a797743871 arm64: dts: qcom: Add AOSS QMP node
The AOSS QMP provides a number of power domains, used for QDSS and
PIL, add the node for this.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 21:53:52 -07:00
Bjorn Andersson
2209481409 soc: qcom: Add AOSS QMP driver
The Always On Subsystem (AOSS) Qualcomm Messaging Protocol (QMP) driver
is used to communicate with the AOSS for certain side-channel requests,
that are not available through the RPMh interface.

The communication is a very simple synchronous mechanism of messages
being written in message RAM and a doorbell in the AOSS is rung. As the
AOSS has processed the message length is cleared and an interrupt is
fired by the AOSS as acknowledgment.

The driver exposes the QDSS clock as a clock and the low-power state
associated with the remoteprocs in the system as a set of power-domains.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 21:52:18 -07:00
Bjorn Andersson
8ad2b4b371 dt-bindings: soc: qcom: Add AOSS QMP binding
Add binding for the QMP based side-channel communication mechanism to
the AOSS, which is used to control resources not exposed through the
RPMh interface.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 21:52:15 -07:00
YueHaibing
83eb5cfcd5 dmaengine: dw-edma: Fix build error without CONFIG_PCI_MSI
If CONFIG_PCI_MSI is not set, building with CONFIG_DW_EDMA
fails:

drivers/dma/dw-edma/dw-edma-core.c: In function dw_edma_irq_request:
drivers/dma/dw-edma/dw-edma-core.c:784:21: error: implicit declaration of function pci_irq_vector; did you mean rcu_irq_enter? [-Werror=implicit-function-declaration]
   err = request_irq(pci_irq_vector(to_pci_dev(dev), 0),
                     ^~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-12 10:22:02 +05:30
Srinivas Kandagatla
1ac19ad799 qcom: apr: Make apr callbacks in non-atomic context
APR communication with DSP is not atomic in nature.
Its request-response type. Trying to pretend that these are atomic
and invoking apr client callbacks directly under atomic/irq context has
endless issues with soundcard. It makes more sense to convert these
to nonatomic calls. This also coverts all the dais to be nonatomic.

All the callbacks are now invoked as part of rx work queue.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11 21:51:07 -07:00
Florian Fainelli
64f35709d5 MAINTAINERS: BCM53573: Add internal Broadcom mailing list
There is a patchwork instance behind bcm-kernel-feedback-list that is
helpful to track submissions, add this list for the Broadcom BCM53573
architecture.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-11 19:43:05 -07:00
Florian Fainelli
9c8434516b MAINTAINERS: BCM2835: Add internal Broadcom mailing list
There is a patchwork instance behind bcm-kernel-feedback-list that is
helpful to track submissions for the Broadcom ARM-SoC maintainers and
make sure there are no patches missed, add this list for the Broadcom
BCM2835 architecture.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-11 19:42:55 -07:00
Linus Torvalds
aa7235483a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace fixes from Eric Biederman:
 "This is just two very minor fixes:

   - prevent ptrace from reading unitialized kernel memory found twice
     by syzkaller

   - restore a missing smp_rmb in ptrace_may_access and add comment tp
     it so it is not removed by accident again.

  Apologies for being a little slow about getting this to you, I am
  still figuring out how to develop with a little baby in the house"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ptrace: restore smp_rmb() in __ptrace_may_access()
  signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
2019-06-11 15:44:45 -10:00
Linus Torvalds
4d8f5f91b8 Merge branch 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
 "One tiny fix for ARM64 where we could allocate the SWIOTLB twice"

* 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  xen/swiotlb: don't initialize swiotlb twice on arm64
2019-06-11 15:38:34 -10:00
Linus Torvalds
c23b07125f VFIO fixes for v5.2-rc5
- Fix mdev device create/remove paths to provide initialized device for
    parent driver create callback and correct ordering of device removal
    from bus prior to initiating removal by parent.  Also resolve races
    between parent removal and device create/remove paths. (Parav Pandit)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJc/+HbAAoJECObm247sIsiCDUP/Azz8EnURPlDNjTFSn9/7S1M
 4ul/K3XU1iwkSP2NuUGSnt10qlsOp4o4EVLB1iYOUJBRiQ9ZIYhAG0YWM1BOrztQ
 WU41cXQwLS8wvEWL/gpnaKTC3czSh99eaZI0N2+P2j2D6l46JHUUWJjHxcns6LEz
 F5SiJO4adbbspZwDtkqupJ4qk8orYdGYUQpwGTCCEoUxuXo8t6so5xec93/7Epjw
 oLUJIHVV4EjxAobVM46F6OKPTCGPf8RF9FHqBf/Btq1EVdeQLoNe4Vk5c+apGpoh
 owObA/9+x4G+MRWbFHG6t7pEdFvJvcTUgTj4CMsyL4CjOIEGPmyjfH/NKc8TJ+Sr
 p57X/i5Zqd9B2vufaJABk3mOCKk1UT8Tv+9WPQH5tsEvQvfkx35pgMM4WP3DkmaS
 3RpGVhR9u0PzWUtQhQrd9y7IIwdvo65ICr8o4O11gn710Cqc33OyGzF14NET3yeD
 HqY0eByZPanflI2hFhTTZzDHkFIfE1yP/ZCT13WrBQHAVZMk6v6+VqJl6rxDPCoH
 YB/K+Xu8p4N2qfMXo/HeXwh4uRzyrOCxyXUjJ/YVZffGe77eyWhsgGgtZxeMkG0M
 YwHj6s9zeSJu+70EKIp0c0k1AYPvWpH3naNj/8XqEBnBCr0QDOHi/hIomGeVp7f9
 rhOeCBl5ZJgMoLvRi1hG
 =CXX0
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:
 "Fix mdev device create/remove paths to provide initialized device for
  parent driver create callback and correct ordering of device removal
  from bus prior to initiating removal by parent.

  Also resolve races between parent removal and device create/remove
  paths (all from Parav Pandit)"

* tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio:
  vfio/mdev: Synchronize device create/remove with parent removal
  vfio/mdev: Avoid creating sysfs remove file on stale device removal
  vfio/mdev: Improve the create/remove sequence
2019-06-11 15:27:57 -10:00
Linus Torvalds
6fa425a265 for-5.2-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlz/z0wACgkQxWXV+ddt
 WDt/4g//eS+USsVpHV65AoOC+LWHQFvKHVNX97l53yy7GvINxgCO5+X7MctvCP1P
 cEhhyGhapTFWinOj2zoMSz+mk1//wkqPsC9KzN+ha1fx0ktj+IKms+xbh3kFsygq
 dbqLMBHobGpCVV1z7kg+YN0OnG3W90qv/5TqeYhPADBEzEDffXuj+5qEul88J47h
 n4GP309mJcJwO1SmYOMFTchZDKJJnFMejr+KS+hOvzh3i5C6ZVOLeEs2yksdFvUi
 X9zeM9sbzshPonzRQVR9xazzW3JKP69rgkz+fo5TLnKqYwXiGN9ObCCjtKm/rck6
 pkJbvSmqV6QpX/pBUwdI/8DjgQyrPlfVyVcv5lU960mwya0eCkJYTa95bMC7N4UJ
 NNfROq9aJHKmct/rHECLsOwRTy2KuAqpX7+Ktjy6Sarw9bvlPwpgBep7PvYR9DXf
 mC9QHcRTYDCoKR5SF5xzB5lQHVOfWe6dduCugW8BhvO8t3ty+IW8p9WfcNXkTVu8
 SQWuxF2Y9uOEuTJMmyw6gbl1KRppg+U95r7vpKKbPFXMrsJDcGy2eUhMHfChwnkO
 brI2scsAaJg+UMvTjjO/8DVw4qpR9UDZaDgPqsGcFCNIQv65bPlL/UnQD112M2Ba
 w9FsvwbyI1AgUC0JsslLoHQVcOqHl2DnxFyvtbFTy0zcJK8fPxY=
 =UByh
 -----END PGP SIGNATURE-----

Merge tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fix from David Sterba:
 "One regression fix to TRIM ioctl.

  The range cannot be used as its meaning can be confusing regarding
  physical and logical addresses. This confusion in code led to
  potential corruptions when the range overlapped data.

  The original patch made it to several stable kernels and was promptly
  reverted, the version for master branch is different due to additional
  changes but the change is effectively the same"

* tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Always trim all unallocated space in btrfs_trim_free_extents
2019-06-11 15:10:15 -10:00
Anson Huang
ce9a53eb3d Input: imx_keypad - make sure keyboard can always wake up system
There are several scenarios that keyboard can NOT wake up system
from suspend, e.g., if a keyboard is depressed between system
device suspend phase and device noirq suspend phase, the keyboard
ISR will be called and both keyboard depress and release interrupts
will be disabled, then keyboard will no longer be able to wake up
system. Another scenario would be, if a keyboard is kept depressed,
and then system goes into suspend, the expected behavior would be
when keyboard is released, system will be waked up, but current
implementation can NOT achieve that, because both depress and release
interrupts are disabled in ISR, and the event check is still in
progress.

To fix these issues, need to make sure keyboard's depress or release
interrupt is enabled after noirq device suspend phase, this patch
moves the suspend/resume callback to noirq suspend/resume phase, and
enable the corresponding interrupt according to current keyboard status.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-11 17:52:02 -07:00
Martin Blumenstingl
568465c3fb arm64: dts: meson: g12a: add the GPIO interrupt controller
GPIO interrupts are used for the external Ethernet RGMII PHY interrupt
line.
Add the GPIO interrupt controller so we can describe that connection in
the dts files.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 16:18:06 -07:00
Kamal Heib
cbdc666f3e RDMA/ipoib: Remove check for ETH_SS_TEST
The default action for unlisted tests is "not-supported", so given that
ipoib doesn't support ETH_SS_TEST, there is no need to check for it
in the case statements, just let it get caught by the default: case.

Fixes: e3614bc9dc ("IB/ipoib: Add readout of statistics using ethtool")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11 19:00:10 -04:00
Neil Armstrong
e4998f48ea arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s
Setting to 2Mbaud/s is the nominal bus speed for common usages.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:04 -07:00
Neil Armstrong
dff60019d9 arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s
Setting to 2Mbaud/s is the nominal bus speed for common usages.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:04 -07:00
Neil Armstrong
524595ec62 arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:04 -07:00
Neil Armstrong
faf438e066 arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node
The 32k low power clock is necessary for the bluetooth part of the
combo module to initialize correctly, simply add the same clock we
use for the sdio pwrseq.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:04 -07:00
Neil Armstrong
5f57a09e96 arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module
The SEI510 embeds an AP6398S SDIO module, let's add the
corresponding SDIO, PWM clock and mmc-pwrseq nodes.

Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:04 -07:00
Neil Armstrong
b497ad3820 arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module
The X96 Max embeds an AP6398S SDIO module, let's add the
corresponding SDIO, PWM clock and mmc-pwrseq nodes.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:04 -07:00
Guillaume La Roque
45380009f7 arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc
Add nodes to support SDCard and onboard eMMC on the X96 Max.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:04 -07:00
Jerome Brunet
8a6b3ca2d3 arm64: dts: meson: g12a: add SDIO controller
The Amlogic G12A SDIO Controller has a bug preventing direct DDR access,
add the port A (SDIO) pinctrl and controller nodes and mark this specific
controller with the amlogic,dram-access-quirk property.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:03 -07:00
Neil Armstrong
c35f6dc5c3 arm64: dts: meson: Add minimal support for Odroid-N2
This patch adds basic support for :
- Amlogic G12B, which is very similar to G12A
- The HardKernel Odroid-N2 based on the S922X SoC

The Amlogic G12B SoC is very similar with the G12A SoC, sharing
most of the features and architecture, but with these differences :
- The first CPU cluster only has 2xCortex-A53 instead of 4
- G12B has a second cluster of 4xCortex-A73
- Both cluster can achieve 2GHz instead of 1,8GHz for G12A
- CPU Clock architecture is difference, thus needing a different
  compatible to handle this slight difference
- Supports a MIPI CSI input
- Embeds a Mali-G52 instead of a Mali-G31, but integration is the same

Actual support is done in the same way as for the GXM support, including
the G12A dtsi and redefining the CPU clusters.
Unlike GXM, the first cluster is different, thus needing to remove
the last 2 cpu nodes of the first cluster.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
[khilman: add vin-supply for vcc_v5 as suggested by Anand Moon]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:03 -07:00
Neil Armstrong
3113784003 dt-bindings: arm: amlogic: add Odroid-N2 binding
Add compatible for the Amlogic G12B (S922X) SoC based Odroid-N2 SBC
from HardKernel.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:03 -07:00
Neil Armstrong
b365c124f1 dt-bindings: arm: amlogic: add G12B bindings
Add compatible for the Amlogic G12B SoC, sharing most of the
features and architecture with the G12A SoC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:03 -07:00
Neil Armstrong
ec066d8f9e arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt
Add the external ethernet PHY interrupt on the Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:03 -07:00
Neil Armstrong
b07a11dbdf arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support
Fix the SDIO WiFi support and add proper Bluetooth support on the
Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:03 -07:00
Neil Armstrong
f1ef6262d1 arm64: dts: meson-gxbb-vega-s95: enable SARADC
Add SARARC node and associated regulator to support reading the
ADC inputs on the Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:03 -07:00
Neil Armstrong
8d6dbe5be8 arm64: dts: meson-gxbb-vega-s95: enable CEC
Add CEC nodes to support CEC communication on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:02 -07:00
Neil Armstrong
954b67dfe6 arm64: dts: meson-gxbb-vega-s95: add HDMI nodes
Add HDMI nodes to support graphics on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:02 -07:00
Neil Armstrong
41112431e5 arm64: dts: meson-gxbb-vega-s95: fix regulators
Align the regulator names with other GXBB SoCS for upcoming
SARADC support and SDIO/SDCard fixes.
Also fix how regulators are passed to MMC controllers & USB.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:02 -07:00
Christian Hewitt
55c2440dd0 arm64: dts: meson-gxbb-wetek: enable bluetooth
This enables Bluetooth support for the following models:

AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd
AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd
AP6330 in the WeTek Play 2 - BCM4330B1.hcd

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:02 -07:00
Christian Hewitt
dfa8b3cd14 arm64: dts: meson-gxbb-wetek: enable SARADC
Enable SARADC on Wetek Boards.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:02 -07:00
Christian Hewitt
33344e2111 arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support
- Remove serial1 alias
- Add support for uart_A rts/cts
- Add bluetooth uart_A subnode qith shutdown gpio

Fixes: b8b74dda39 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:02 -07:00
Christian Hewitt
0afd24c2fb arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node
Fix DTC warnings:

meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
   /gpio-keys-polled: unnecessary #address-cells/#size-cells
	without "ranges" or child "reg" property

Fixes: b8b74dda39 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:02 -07:00
Neil Armstrong
e8e7037cb6 arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support
Enable the network interface of the X96 Mac using an external
Realtek RTL8211F gigabit PHY, needing the same broken-eee properties
as the previous Amlogic SoC generations.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:01 -07:00
Neil Armstrong
1b2f377b51 arm64: dts: meson: g12a: Add hwrng node
The Amlogic G12A has the hwrng module at the end of an unknown
"EFUSE" bus.

The hwrng is not enabled on the vendor G12A DTs, but is enabled on
next generation SM1 SoC family sharing the exact same memory mapping.

Let's add the "EFUSE" bus and the hwrng node.

This hwrng has been checked with the rng-tools rngtest FIPS tool :
rngtest: starting FIPS tests...
rngtest: bits received from input: 1630240032
rngtest: FIPS 140-2 successes: 81436
rngtest: FIPS 140-2 failures: 76
rngtest: FIPS 140-2(2001-10-10) Monobit: 10
rngtest: FIPS 140-2(2001-10-10) Poker: 6
rngtest: FIPS 140-2(2001-10-10) Runs: 26
rngtest: FIPS 140-2(2001-10-10) Long run: 34
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
rngtest: Program run time: 30000987 microseconds

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:01 -07:00
Jerome Brunet
9d63f5d138 arm64: dts: meson: add dwmac-3.70a to ethmac compatible list
After discussing with Amlogic, the Synopsys GMAC version used by
the gx and axg family is the 3.70a. Set this is in DT

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11 15:50:01 -07:00