Extend the bridge multicast control and data path to configure routes
for L2 (non-IP) multicast groups.
The uapi struct br_mdb_entry union u is extended with another variant,
mac_addr, which does not change the structure size, and which is valid
when the proto field is zero.
To be compatible with the forwarding code that is already in place,
which acts as an IGMP/MLD snooping bridge with querier capabilities, we
need to declare that for L2 MDB entries (for which there exists no such
thing as IGMP/MLD snooping/querying), that there is always a querier.
Otherwise, these entries would be flooded to all bridge ports and not
just to those that are members of the L2 multicast group.
Needless to say, only permanent L2 multicast groups can be installed on
a bridge port.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201028233831.610076-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree says:
====================
sfc: EF100 TSO enhancements
Support TSO over encapsulation (with GSO_PARTIAL), and over VLANs
(which the code already handled but we didn't advertise). Also
correct our handling of IPID mangling.
I couldn't find documentation of exactly what shaped SKBs we can
get given, so patch #2 is slightly guesswork, but when I tested
TSO over both underlay and (VxLAN) overlay, the checksums came
out correctly, so at least in those cases the edits we're making
must be the right ones.
Similarly, I'm not 100% sure I've correctly understood how FIXEDID
and MANGLEID are supposed to work in patch #3.
====================
Link: https://lore.kernel.org/r/6e1ea05f-faeb-18df-91ef-572445691d89@solarflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AIUI, the NETIF_F_TSO_MANGLEID flag is a signal to the stack that a
driver may _need_ to mangle IDs in order to do TSO, and conversely
a signal from the stack that the driver is permitted to do so.
Since we support both fixed and incrementing IPIDs, we should rely
on the SKB_GSO_FIXEDID flag on a per-skb basis, rather than using
the MANGLEID feature to make all TSOs fixed-id.
Includes other minor cleanups of ef100_make_tso_desc() coding style.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NIC only needs to know where the headers it has to edit (TCP and
inner and outer IPv4) are, which fits GSO_PARTIAL nicely.
It also supports non-PARTIAL offload of UDP tunnels, again just
needing to be told the outer transport offset so that it can edit
the UDP length field.
(It's not clear to me whether the stack will ever use the non-PARTIAL
version with the netdev feature flags we're setting here.)
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need EFX_POPULATE_OWORD_17 for an encap TSO descriptor on EF100.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check for swiotlb has moved to nouveu_ttm.c, but we forgot to move
the include as well.
This blows up only when merged with linux-next, not sure why drm-misc-next
works stand alone.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/397835/
Alex Elder says:
====================
net: ipa: minor bug fixes
This series fixes several bugs. They are minor, in that the code
currently works on supported platforms even without these patches
applied, but they're bugs nevertheless and should be fixed.
Version 2 improves the commit message for the fourth patch. It also
fixes a bug in two spots in the last patch. Both of these changes
were suggested by Willem de Bruijn.
====================
Link: https://lore.kernel.org/r/20201028194148.6659-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The minimum and maximum limits for resources assigned to a given
resource group are programmed in pairs, with the limits for two
groups set in a single register.
If the number of supported resource groups is odd, only half of the
register that defines these limits is valid for the last group; that
group has no second group in the pair.
Currently we ignore this constraint, and it turns out to be harmless,
but it is not guaranteed to be. This patch addresses that, and adds
support for programming the 5th resource group's limits.
Rework how the resource group limit registers are programmed by
having a single function program all group pairs rather than having
one function program each pair. Add the programming of the 4-5
resource group pair limits to this function. If a resource group is
not supported, pass a null pointer to ipa_resource_config_common()
for that group and have that function write zeroes in that case.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of resource groups supported by the hardware can be
different for source and destination resources. Determine the
number supported for each using separate functions. Make the
functions inline end move their definitions into "ipa_reg.h",
because they determine whether certain register definitions are
valid. Pass just the IPA hardware version as argument.
IPA_RESOURCE_GROUP_COUNT represents the maximum number of resource
groups the driver supports for any hardware version. Change that
symbol to be two separate constants, one for source and the other
for destination resource groups. Rename them to end with "_MAX"
rather than "_COUNT", to reflect their true purpose.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPA hardware manages various resources (e.g. descriptors)
internally to perform its functions. The resources are grouped,
allowing different endpoints to use separate resource pools. This
way one group of endpoints can be configured to operate unaffected
by the resource use of endpoints in a different group.
Endpoints should be assigned to a resource group, but we currently
don't do that.
Define a new resource_group field in the endpoint configuration
data, and use it to assign the proper resource group to use for
each AP endpoint.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mask for the RSRC_GRP field in the INIT_RSRC_GRP endpoint
initialization register is incorrectly defined for IPA v4.2 (where
it is only one bit wide). So we need to fix this.
The fix is not straightforward, however. Field masks are passed to
functions like u32_encode_bits(), and for that they must be constant.
To address this, we define a new inline function that returns the
*encoded* value to use for a given RSRC_GRP field, which depends on
the IPA version. The caller can then use something like this, to
assign a given endpoint resource id 1:
u32 offset = IPA_REG_ENDP_INIT_RSRC_GRP_N_OFFSET(endpoint_id);
u32 val = rsrc_grp_encoded(ipa->version, 1);
iowrite32(val, ipa->reg_virt + offset);
The next patch requires this fix.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the end of ipa_mem_setup() we write the local packet processing
context base register to tell it where the processing context memory
is. But we are writing the wrong value.
The value written turns out to be the offset of the modem header
memory region (assigned earlier in the function). Fix this bug.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver does not implement a shutdown handler which leads to issues
when using kexec in certain scenarios. The NIC keeps on fetching
descriptors which gets flagged by the IOMMU with errors like this:
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201028172125.496942-1-mdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Finisar FCLF8520P2BTL 1000BaseT SFP module uses a Marvel 88E1111 PHY
with a modified PHY ID. Add support for this ID using the 88E1111
methods.
By default these modules do not have 1000BaseX auto-negotiation enabled,
which is not generally desirable with Linux networking drivers. Add
handling to enable 1000BaseX auto-negotiation when these modules are
used in 1000BaseX mode. Also, some special handling is required to ensure
that 1000BaseT auto-negotiation is enabled properly when desired.
Based on existing handling in the AMD xgbe driver and the information in
the Finisar FAQ:
https://www.finisar.com/sites/default/files/resources/an-2036_1000base-t_sfp_faqreve1.pdf
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20201028171540.1700032-1-robert.hancock@calian.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make changes to use sysfs_emit in the RDMA code as cocci scripts can not
be written to handle _all_ the possible variants of various sprintf family
uses in sysfs show functions.
While there, make the code more legible and update its style to be more
like the typical kernel styles.
Miscellanea:
o Use intermediate pointers for dereferences
o Add and use string lookup functions
o return early when any intermediate call fails so normal return is
at the bottom of the function
o mlx4/mcg.c:sysfs_show_group: use scnprintf to format intermediate strings
Link: https://lore.kernel.org/r/f5c9e4c9d8dafca1b7b70bd597ee7f8f219c31c8.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Xin Long says:
====================
sctp: Implement RFC6951: UDP Encapsulation of SCTP
Description From the RFC:
The Main Reasons:
o To allow SCTP traffic to pass through legacy NATs, which do not
provide native SCTP support as specified in [BEHAVE] and
[NATSUPP].
o To allow SCTP to be implemented on hosts that do not provide
direct access to the IP layer. In particular, applications can
use their own SCTP implementation if the operating system does not
provide one.
Implementation Notes:
UDP-encapsulated SCTP is normally communicated between SCTP stacks
using the IANA-assigned UDP port number 9899 (sctp-tunneling) on both
ends. There are circumstances where other ports may be used on
either end, and it might be required to use ports other than the
registered port.
Each SCTP stack uses a single local UDP encapsulation port number as
the destination port for all its incoming SCTP packets, this greatly
simplifies implementation design.
An SCTP implementation supporting UDP encapsulation MUST maintain a
remote UDP encapsulation port number per destination address for each
SCTP association. Again, because the remote stack may be using ports
other than the well-known port, each port may be different from each
stack. However, because of remapping of ports by NATs, the remote
ports associated with different remote IP addresses may not be
identical, even if they are associated with the same stack.
Because the well-known port might not be used, implementations need
to allow other port numbers to be specified as a local or remote UDP
encapsulation port number through APIs.
Patches:
This patchset is using the udp4/6 tunnel APIs to implement the UDP
Encapsulation of SCTP with not much change in SCTP protocol stack
and with all current SCTP features keeped in Linux Kernel.
1 - 4: Fix some UDP issues that may be triggered by SCTP over UDP.
5 - 7: Process incoming UDP encapsulated packets and ICMP packets.
8 -10: Remote encap port's update by sysctl, sockopt and packets.
11-14: Process outgoing pakects with UDP encapsulated and its GSO.
15-16: Add the part from draft-tuexen-tsvwg-sctp-udp-encaps-cons-03.
17: Enable this feature.
Tests:
- lksctp-tools/src/func_tests with UDP Encapsulation enabled/disabled:
Both make v4test and v6test passed.
- sctp-tests with UDP Encapsulation enabled/disabled:
repeatability/procdumps/sctpdiag/gsomtuchange/extoverflow/
sctphashtable passed. Others failed as expected due to those
"iptables -p sctp" rules.
- netperf on lo/netns/virtio_net, with gso enabled/disabled and
with ip_checksum enabled/disabled, with UDP Encapsulation
enabled/disabled:
No clear performance dropped.
v1->v2:
- Fix some incorrect code in the patches 5,6,8,10,11,13,14,17, suggested
by Marcelo.
- Append two patches 15-16 to add the Additional Considerations for UDP
Encapsulation of SCTP from draft-tuexen-tsvwg-sctp-udp-encaps-cons-03.
v2->v3:
- remove the cleanup code in patch 2, suggested by Willem.
- remove the patch 3 and fix the checksum in the new patch 3 after
talking with Paolo, Marcelo and Guillaume.
- add 'select NET_UDP_TUNNEL' in patch 4 to solve a compiling error.
- fix __be16 type cast warning in patch 8.
- fix the wrong endian orders when setting values in 14,16.
v3->v4:
- add entries in ip-sysctl.rst in patch 7,16, as Marcelo Suggested.
- not create udp socks when udp_port is set to 0 in patch 16, as
Marcelo noticed.
v4->v5:
- improve the description for udp_port and encap_port entries in patch
7, 16.
- use 0 as the default udp_port.
====================
Link: https://lore.kernel.org/r/cover.1603955040.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to enable udp tunneling socks by calling
sctp_udp_sock_start() in sctp_ctrlsock_init(), and
sctp_udp_sock_stop() in sctp_ctrlsock_exit().
Also add sysctl udp_port to allow changing the listening
sock's port by users.
Wit this patch, the whole sctp over udp feature can be
enabled and used.
v1->v2:
- Also update ctl_sock udp_port in proc_sctp_do_udp_port()
where netns udp_port gets changed.
v2->v3:
- Call htons() when setting sk udp_port from netns udp_port.
v3->v4:
- Not call sctp_udp_sock_start() when new_value is 0.
- Add udp_port entry in ip-sysctl.rst.
v4->v5:
- Not call sctp_udp_sock_start/stop() in sctp_ctrlsock_init/exit().
- Improve the description of udp_port in ip-sysctl.rst.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is from Section 4 of draft-tuexen-tsvwg-sctp-udp-encaps-cons-03,
and it requires responding with an abort chunk with an error cause
when the udp source port of the received init chunk doesn't match the
encap port of the transport.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to add the function to make the abort chunk with
the error cause for new encapsulation port restart, defined
on Section 4.4 in draft-tuexen-tsvwg-sctp-udp-encaps-cons-03.
v1->v2:
- no change.
v2->v3:
- no need to call htons() when setting nep.cur_port/new_port.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This one basically does the similar things in sctp_v6_xmit as does for
udp4 sock in the last patch, just note that:
1. label needs to be calculated, as it's the param of
udp_tunnel6_xmit_skb().
2. The 'nocheck' param of udp_tunnel6_xmit_skb() is false, as
required by RFC.
v1->v2:
- Use sp->udp_port instead in sctp_v6_xmit(), which is more safe.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch does what the rfc6951#section-5.3 says for ipv4:
"Within the UDP header, the source port MUST be the local UDP
encapsulation port number of the SCTP stack, and the destination port
MUST be the remote UDP encapsulation port number maintained for the
association and the destination address to which the packet is sent
(see Section 5.1).
Because the SCTP packet is the UDP payload, the length of the UDP
packet MUST be the length of the SCTP packet plus the size of the UDP
header.
The SCTP checksum MUST be computed for IPv4 and IPv6, and the UDP
checksum SHOULD be computed for IPv4 and IPv6."
Some places need to be adjusted in sctp_packet_transmit():
1. For non-gso packets, when transport's encap_port is set, sctp
checksum has to be done in sctp_packet_pack(), as the outer
udp will use ip_summed = CHECKSUM_PARTIAL to do the offload
setting for checksum.
2. Delay calling dst_clone() and skb_dst_set() for non-udp packets
until sctp_v4_xmit(), as for udp packets, skb_dst_set() is not
needed before calling udp_tunnel_xmit_skb().
then in sctp_v4_xmit():
1. Go to udp_tunnel_xmit_skb() only when transport->encap_port and
net->sctp.udp_port both are set, as these are one for dst port
and another for src port.
2. For gso packet, SKB_GSO_UDP_TUNNEL_CSUM is set for gso_type, and
with this udp checksum can be done in __skb_udp_tunnel_segment()
for each segments after the sctp gso.
3. inner_mac_header and inner_transport_header are set, as these
will be needed in __skb_udp_tunnel_segment() to find the right
headers.
4. df and ttl are calculated, as these are the required params by
udp_tunnel_xmit_skb().
5. nocheck param has to be false, as "the UDP checksum SHOULD be
computed for IPv4 and IPv6", says in rfc6951#section-5.3.
v1->v2:
- Use sp->udp_port instead in sctp_v4_xmit(), which is more safe.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_setup_caps() was originally called in Commit 90017accff ("sctp:
Add GSO support"), as:
"We have to refresh this in case we are xmiting to more than one
transport at a time"
This actually happens in the loop of sctp_outq_flush_transports(),
and it shouldn't be tied to gso, so move it out of gso part and
before sctp_packet_pack().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_mtu_payload() is for calculating the frag size before making
chunks from a msg. So we should only add udphdr size to overhead
when udp socks are listening, as only then sctp can handle the
incoming sctp over udp packets and outgoing sctp over udp packets
will be possible.
Note that we can't do this according to transport->encap_port, as
different transports may be set to different values, while the
chunks were made before choosing the transport, we could not be
able to meet all rfc6951#section-5.6 recommends.
v1->v2:
- Add udp_port for sctp_sock to avoid a potential race issue, it
will be used in xmit path in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As rfc6951#section-5.4 says:
"After finding the SCTP association (which
includes checking the verification tag), the UDP source port MUST be
stored as the encapsulation port for the destination address the SCTP
packet is received from (see Section 5.1).
When a non-encapsulated SCTP packet is received by the SCTP stack,
the encapsulation of outgoing packets belonging to the same
association and the corresponding destination address MUST be
disabled."
transport encap_port should be updated by a validated incoming packet's
udp src port.
We save the udp src port in sctp_input_cb->encap_port, and then update
the transport in two places:
1. right after vtag is verified, which is required by RFC, and this
allows the existent transports to be updated by the chunks that
can only be processed on an asoc.
2. right before processing the 'init' where the transports are added,
and this allows building a sctp over udp connection by client with
the server not knowing the remote encap port.
3. when processing ootb_pkt and creating the temporary transport for
the reply pkt.
Note that sctp_input_cb->header is removed, as it's not used any more
in sctp.
v1->v2:
- Change encap_port as __be16 for sctp_input_cb.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to implement:
rfc6951#section-6.1: Get or Set the Remote UDP Encapsulation Port Number
with the param of the struct:
struct sctp_udpencaps {
sctp_assoc_t sue_assoc_id;
struct sockaddr_storage sue_address;
uint16_t sue_port;
};
the encap_port of sock, assoc or transport can be changed by users,
which also means it allows the different transports of the same asoc
to have different encap_port value.
v1->v2:
- no change.
v2->v3:
- fix the endian warning when setting values between encap_port and
sue_port.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
encap_port is added as per netns/sock/assoc/transport, and the
latter one's encap_port inherits the former one's by default.
The transport's encap_port value would mostly decide if one
packet should go out with udp encapsulated or not.
This patch also allows users to set netns' encap_port by sysctl.
v1->v2:
- Change to define encap_port as __be16 for sctp_sock, asoc and
transport.
v2->v3:
- No change.
v3->v4:
- Add 'encap_port' entry in ip-sysctl.rst.
v4->v5:
- Improve the description of encap_port in ip-sysctl.rst.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As it says in rfc6951#section-5.5:
"When receiving ICMP or ICMPv6 response packets, there might not be
enough bytes in the payload to identify the SCTP association that the
SCTP packet triggering the ICMP or ICMPv6 packet belongs to. If a
received ICMP or ICMPv6 packet cannot be related to a specific SCTP
association or the verification tag cannot be verified, it MUST be
discarded silently. In particular, this means that the SCTP stack
MUST NOT rely on receiving ICMP or ICMPv6 messages. Implementation
constraints could prevent processing received ICMP or ICMPv6
messages."
ICMP or ICMPv6 packets need to be handled, and this is implemented by
udp encap sock .encap_err_lookup function.
The .encap_err_lookup function is called in __udp(6)_lib_err_encap()
to confirm this path does need to be updated. For sctp, what we can
do here is check if the corresponding asoc and transport exist.
Note that icmp packet process for sctp over udp is done by udp sock
.encap_err_lookup(), and it means for now we can't do as much as
sctp_v4/6_err() does. Also we can't do the two mappings mentioned
in rfc6951#section-5.5.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to add the udp6 sock part in sctp_udp_sock_start/stop().
udp_conf.use_udp6_rx_checksums is set to true, as:
"The SCTP checksum MUST be computed for IPv4 and IPv6, and the UDP
checksum SHOULD be computed for IPv4 and IPv6"
says in rfc6951#section-5.3.
v1->v2:
- Add pr_err() when fails to create udp v6 sock.
- Add #if IS_ENABLED(CONFIG_IPV6) not to create v6 sock when ipv6 is
disabled.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to add the functions to create/release udp4 sock,
and set the sock's encap_rcv to process the incoming udp encap
sctp packets. In sctp_udp_rcv(), as we can see, all we need to
do is fix the transport header for sctp_rcv(), then it would
implement the part of rfc6951#section-5.4:
"When an encapsulated packet is received, the UDP header is removed.
Then, the generic lookup is performed, as done by an SCTP stack
whenever a packet is received, to find the association for the
received SCTP packet"
Note that these functions will be called in the last patch of
this patchset when enabling this feature.
v1->v2:
- Add pr_err() when fails to create udp v4 sock.
v2->v3:
- Add 'select NET_UDP_TUNNEL' in sctp Kconfig.
v3->v4:
- No change.
v4->v5:
- Change to set udp_port to 0 by default.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the gso of sctp over udp packets, sctp_gso_segment() will be called in
skb_udp_tunnel_segment(), we need to set transport_header to sctp header.
As all the current HWs can't handle both crc checksum and udp checksum at
the same time, the crc checksum has to be done in sctp_gso_segment() by
removing the NETIF_F_SCTP_CRC flag from the features.
Meanwhile, if the HW can't do udp checksum, csum and csum_start has to be
set correctly, and udp checksum will be done in __skb_udp_tunnel_segment()
by calling gso_make_checksum().
Thanks to Paolo, Marcelo and Guillaume for helping with this one.
v1->v2:
- no change.
v2->v3:
- remove the he NETIF_F_SCTP_CRC flag from the features.
- set csum and csum_start in sctp_gso_make_checksum().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some protocol's gso, like SCTP, it's using GSO_BY_FRAGS for
gso_size. When using UDP to encapsulate its packet, it will
return error in udp6_ufo_fragment() as skb->len < gso_size,
and it will never go to the gso tunnel processing.
So we should move this check after udp gso tunnel processing,
the same as udp4_ufo_fragment() does.
v1->v2:
- no change.
v2->v3:
- not do any cleanup.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a chance that __udp4/6_lib_lookup() returns a udp encap
sock in __udp_lib_err(), like the udp encap listening sock may
use the same port as remote encap port, in which case it should
go to __udp4/6_lib_err_encap() for more validation before
processing the icmp packet.
This patch is to check encap_type in __udp_lib_err() for the
further validation for a encap sock.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The
older style of one-element or zero-length arrays should no longer be
used[2].
Refactor the code according to the use of a flexible-array member in
struct gve_stats_report, instead of a zero-length array, and use the
struct_size() helper to calculate the size for the resource allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xYFz
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-30' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fixes for linked timeouts (Pavel)
- Set IO_WQ_WORK_CONCURRENT early for async offload (Pavel)
- Two minor simplifications that make the code easier to read and
follow (Pavel)
* tag 'io_uring-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
io_uring: use type appropriate io_kiocb handler for double poll
io_uring: simplify __io_queue_sqe()
io_uring: simplify nxt propagation in io_queue_sqe
io_uring: don't miss setting IO_WQ_WORK_CONCURRENT
io_uring: don't defer put of cancelled ltimeout
io_uring: always clear LINK_TIMEOUT after cancel
io_uring: don't adjust LINK_HEAD in cancel ltimeout
io_uring: remove opcode check on ltimeout kill
-----BEGIN PGP SIGNATURE-----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=5BZ7
-----END PGP SIGNATURE-----
Merge tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block
Pull libata fix from Jens Axboe:
"Single fix for an old regression with sata_nv"
* tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
ata: sata_nv: Fix retrieving of active qcs
DSA assumes that a bridge which has vlan filtering disabled is not
vlan aware, and ignores all vlan configuration. However, the kernel
software bridge code allows configuration in this state.
This causes the kernel's idea of the bridge vlan state and the
hardware state to disagree, so "bridge vlan show" indicates a correct
configuration but the hardware lacks all configuration. Even worse,
enabling vlan filtering on a DSA bridge immediately blocks all traffic
which, given the output of "bridge vlan show", is very confusing.
Allow the VLAN configuration to be updated on Marvell DSA bridges,
otherwise we end up cutting all traffic when enabling vlan filtering.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1kYAU3-00071C-1G@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devices support ACS functionality even though they don't have a
spec-compliant ACS Capability; pci_enable_acs() has a quirk mechanism to
handle them.
We want to enable ACS whenever possible, but 52fbf5bdee ("PCI: Cache ACS
capability offset in device") inadvertently broke this by calling
pci_enable_acs() only if we find an ACS Capability.
This resulted in ACS not being enabled for these non-compliant devices,
which means devices can't be separated into different IOMMU groups, which
in turn means we may not be able to pass those devices through to VMs, as
reported by Boris V:
https://lore.kernel.org/r/74aeea93-8a46-5f5a-343c-790d4c655da3@bstnet.org
Fixes: 52fbf5bdee ("PCI: Cache ACS capability offset in device")
Link: https://lore.kernel.org/r/20201028231545.4116866-1-rajatja@google.com
Reported-by: Boris V <borisvk@bstnet.org>
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Fixed spelling in comment like below:
s/defalut/default/p
This is in linux-next.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201029095525.20200-1-unixbhaskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
make clang-analyzer on x86_64 defconfig caught my attention with:
net/sched/cls_api.c:2964:3: warning: Value stored to 'parent' is never read
[clang-analyzer-deadcode.DeadStores]
parent = 0;
^
net/sched/cls_api.c:2977:4: warning: Value stored to 'parent' is never read
[clang-analyzer-deadcode.DeadStores]
parent = q->handle;
^
Commit 32a4f5ecd7 ("net: sched: introduce chain object to uapi")
introduced tc_dump_chain() and this initial implementation already
contained these unneeded dead stores.
Simplify the code to make clang-analyzer happy.
As compilers will detect these unneeded assignments and optimize this
anyway, the resulting binary is identical before and after this change.
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20201028113533.26160-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 931ca7ab7f ("ip*_mc_gsfget(): lift copyout of struct group_filter
into callers") adjusted the type annotations for ip6_mc_msfget() at its
declaration, but missed the type annotations at its definition.
Hence, sparse complains on ./net/ipv6/mcast.c:
mcast.c:550:5: error: symbol 'ip6_mc_msfget' redeclared with different type \
(incompatible argument 3 (different address spaces))
Make ip6_mc_msfget() annotations consistent, which also resolves this
warning from sparse:
mcast.c:607:34: warning: incorrect type in argument 1 (different address spaces)
mcast.c:607:34: expected void [noderef] __user *to
mcast.c:607:34: got struct __kernel_sockaddr_storage *p
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20201028115349.6855-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
