Print an error message and return if DLL fails to lock.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Line wrapping with the regmap_*() functions is way more conservative
than required by the 80 character rule. Expand the function calls out to
use less number of lines.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If bus_register fails. On its error handling path, it has cleaned up
what it has done. There is no need to call bus_unregister again.
Otherwise, if bus_unregister is called, issues such as null-ptr-deref
will arise.
Syzkaller report this:
kobject_add_internal failed for memstick (error: -12 parent: bus)
BUG: KASAN: null-ptr-deref in sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
Read of size 8 at addr 0000000000000078 by task syz-executor.0/4460
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xa9/0x10e lib/dump_stack.c:113
__kasan_report+0x171/0x18d mm/kasan/report.c:321
kasan_report+0xe/0x20 mm/kasan/common.c:614
sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
sysfs_remove_file include/linux/sysfs.h:519 [inline]
bus_remove_file+0x6c/0x90 drivers/base/bus.c:145
remove_probe_files drivers/base/bus.c:599 [inline]
bus_unregister+0x6e/0x100 drivers/base/bus.c:916 ? 0xffffffffc1590000
memstick_init+0x7a/0x1000 [memstick]
do_one_initcall+0xb9/0x3b5 init/main.c:914
do_init_module+0xe0/0x330 kernel/module.c:3468
load_module+0x38eb/0x4270 kernel/module.c:3819
__do_sys_finit_module+0x162/0x190 kernel/module.c:3909
do_syscall_64+0x72/0x2a0 arch/x86/entry/common.c:298
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: baf8532a14 ("memstick: initial commit for Sony MemoryStick support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On the Amlogic G12A SoC family, (only) the SDIO controller fails to access
the data from DRAM, leading to a broken controller.
But each MMC controller has 1,5KiB of SRAM after the registers, that can
be used as bounce buffer to avoid direct DRAM access from the integrated
DMAs (this SRAM may be used by the boot ROM when DRAM is not yet initialized).
The quirk is to disable the chained descriptor for this controller, and
use this SRAM memory zone as buffer for the bounce buffer fallback mode.
The performance hit hasn't been evaluated, but the fix has been tested
using a WiFi AP6398S SDIO module, and the iperf3 Bandwidth measurement gave
55.2 Mbits/sec over a 63 Hours long test, with the SDIO ios set as High-Speed
at 50MHz clock. It gave 170 Mbits/sec as SDR104 and 200MHz clock.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On the Amlogic G12A SoC family, (only) the SDIO controller has a bug which
makes any DRAM access from the MMC controller fail.
Add the amlogic,dram-access-quirk property so signal this particular
controller has this bug and needs a quirk to work properly.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Both the Renesas and Uniphier implementations perform actions which
affect runtime PM before calling into the core tmio_mmc_host_probe()
which enabled runtime PM. Move pm_runtime_enable() from the core and
tmio_mmc_host_probe() into each drivers probe() so it can be called
before any clocks or other resources are switched on.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver for android-goldfish uses a pointer to get from the private
goldfish_mmc_host structure to the generic mmc_host structure.
However the latter is always immediately preceding the former in
memory, so compute its address with a subtraction (which is cheaper than a
dereference) and drop the superfluous pointer.
No functional change intended.
Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Our HW engineers informed us that HS400 is not working on these SoC
revisions.
Fixes: 0f4e2054c9 ("mmc: renesas_sdhi: disable HS400 on H3 ES1.x and M3-W ES1.[012]")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the EMAC's OCP reset property on Arria10. The OCP reset bits are
also needed to correctly bring the EMACs out of reset correctly.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add the two ltc2497 devices that are on the SoCFPGA Arria10
Socdk board at addresses 0x14 and 0x16.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct spi_replaced_transfers {
...
struct spi_transfer inserted_transfers[];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
insert * sizeof(struct spi_transfer) + sizeof(struct spi_replaced_transfers)
with:
struct_size(rxfer, inserted_transfers, insert)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not use any symbols from <linux/gpio.h>
no <linux/gpio/consumer.h> so just drop the includes.
Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When using modern dai_link style, we must first make sure the
struct snd_soc_dai_link_component exists before accessing its members.
In case of early probe deferral, some of the '.cpus' or '.codecs' may not
have been allocated yet. Check this before calling of_node_put() on the
structure member.
Fixes: c84836d7f6 ("ASoC: meson: axg-card: use modern dai_link style")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the client_mutex lock to snd_soc_unbind_card() before
removing link components. This prevents the deadlock
in the error path in snd_soc_instantiate_card().
Fixes: 34ac3c3eb8 (ASoC: core: lock client_mutex while removing
link components)
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are some new device ids for option and pl2303.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXP5fMgAKCRALxc3C7H1l
CJEKAQDuzkjsWiJhaUXlWN//bUVOzZWwsRdm1d9K6B1ns/9H1AD/bz/WsaaqT4PG
v2kmr4ydrrxEqaO0eQWRrqSfnCF32w0=
=do74
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.2-rc5
Here are some new device ids for option and pl2303.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
USB: serial: pl2303: add Allied Telesis VT-Kit3
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
Keeping the irq_chip definition static shares it with multiple instances
of the altera gpiochip in the system. This is bad and now we get this
warning from gpiolib core:
"detected irqchip that is shared with multiple gpiochips: please fix the
driver."
Hence, move the irq_chip definition from being driver static into the
struct altera_gpio_chips. So a unique irq_chip is used for each gpiochip
instance.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver was using the OF GPIO helper API, but barely used any of its
features and it cost more code than it saved. Also, the OF GPIO code is
now deprecated. Convert it to use a more standard setup and use devm
APIs for initialization to avoid the need for a remove function.
Our rationale for this change is that we are using the Xilinx GPIO with
resources injected using the MFD core rather than on the device tree
itself. Using platform rather than OF-specific resources allows this to
work for free.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix gcc build error while CONFIG_REGMAP_MMIO is not set
drivers/staging/fieldbus/anybuss/arcx-anybus.o: In function `controller_probe':
arcx-anybus.c: undefined reference to `__devm_regmap_init_mmio_clk'
Select REGMAP_MMIO to fix it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2411a336c8 ("staging: fieldbus: arcx-anybus: change custom -> mmio regmap")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the required infrastructure for manually updated displays,
such as DSI command mode panels. While those panels often support
partial updates we currently always do a full refresh.
The display will be refreshed when something calls the dirty callback,
such as libdrm's drmModeDirtyFB(). This is currently being done at least
by the kernel console and Xorg (with modesetting driver) in their
default configuration. Weston does not implement this and the fbdev
backend does not work (display will not update). Weston's DRM backend
uses double buffering and the page flip will also trigger a display
refresh.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This prepares framedone interrupt handling for
manual display update support.
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
While most display types only forward their VM to the DISPC, this
is not true for DSI. DSI calculates the VM for DISPC based on its
own, but it's not identical. Actually the DSI VM is not even a valid
DISPC VM making this check fail. Let's restore the old behaviour
and avoid checking the DISPC VM for DSI here.
Fixes: 7c27fa57ef ("drm/omap: Call dispc timings check operation directly")
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This macro is only used by omapdrm, which should print
debug messages using the DRIVER category instead of the
default CORE category.
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Using dev_get_drvdata directly.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Make sure (of/i2c/platform)_device_id tables are NULL terminated.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
FMC has its own GPIO handling, the inclusion of <linux/gpio.h>
is only to reuse some flags that we can just as well provide
using local defines.
Cc: Federico Vaga <federico.vaga@cern.ch>
Cc: Pat Riehecky <riehecky@fnal.gov>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
So long as a struct hmm pointer exists, so should the struct mm it is
linked too. Hold the mmgrab() as soon as a hmm is created, and mmdrop() it
once the hmm refcount goes to zero.
Since mmdrop() (ie a 0 kref on struct mm) is now impossible with a !NULL
mm->hmm delete the hmm_hmm_destroy().
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Ralph observes that hmm_range_register() can only be called by a driver
while a mirror is registered. Make this clear in the API by passing in the
mirror structure as a parameter.
This also simplifies understanding the lifetime model for struct hmm, as
the hmm pointer must be valid as part of a registered mirror so all we
need in hmm_register_range() is a simple kref_get.
Suggested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Philip Yang <Philip.Yang@amd.com>
In set_pte_at(), we read the old pte value so that it can be passed into
checks for racy hw updates. These checks are only performed for
CONFIG_DEBUG_VM, and the value is not used otherwise.
Since we read the pte value with READ_ONCE(), the compiler cannot elide
the redundant read for !CONFIG_DEBUG_VM kernels.
Let's ameliorate matters by moving the read and the checks into a
helper, __check_racy_pte_update(), which only performs the read when the
value will be used. This also allows us to reformat the conditions for
clarity.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently there is no way to distinguish if the SoC entered DS0
mode or the RTC only mode. Hence add a print before entering
the RTC only mode.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix sparse warnings:
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:532:25: warning: symbol 'am33xx_gpio_hwmod_class' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:542:19: warning: symbol 'am33xx_gpio1_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:562:19: warning: symbol 'am33xx_gpio2_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:582:19: warning: symbol 'am33xx_gpio3_hwmod' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Default values fit better than these historical settings.
Hardware layout had been adapted accordingly already in
alpha stage. They did not cause problems for a long time.
Removed values now.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rename user led nodes to match the phytec user leds name scheme.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As nand flash is not always the primary storage device any more
disable it in the phycore-som include file. Enable it the device tree
files where it is populated.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The phyCORE-AM335x EMMC modules have an EMMC populated and are based
on the phyCORE-AM335x R2 SOM. Therefore, the EMMC node will be added to
the phycore-som devce tree but is by default disabled.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move regulators directly to the root node like most am335x boards do.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There are two LCD device released by Logic PD for the Torpedo,
type 15 and Type 28. The stock dts file supports the older LCD,
so this patch enables support for the newer one.
For details between these different LCD's see
https://support.logicpd.com/DesktopModules/Bring2mind/DMX/Download.aspx?portalid=0&EntryId=2777
Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: removed extra blank line for checkpatch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some older interconnect target modules need module internal clock
toggling quirks to reset properly. We've been doing this in the
platform code earlier, but need to be able to it directly in the
ti-sysc driver when we no longer rely on on the platform code.
Let's add reset handling for 1-wire, i2c and watchdog. Later on
we can add more modules like msdi and dss as they get tested.
For dra7 pcie, we should be able to just use the rstctrl reset
driver when available.
Signed-off-by: Tony Lindgren <tony@atomide.com>
It's better to use my kadlec@netfilter.org email address in
the source code. I might not be able to use
kadlec@blackhole.kfki.hu in the future.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
If a fresh array block is allocated during resize, the current in-memory
set size should be increased by the size of the block, not replaced by it.
Before the fix, adding entries to a hash set type, leading to a table
resize, caused an inconsistent memory size to be reported. This becomes
more obvious when swapping sets with similar sizes:
# cat hash_ip_size.sh
#!/bin/sh
FAIL_RETRIES=10
tries=0
while [ ${tries} -lt ${FAIL_RETRIES} ]; do
ipset create t1 hash:ip
for i in `seq 1 4345`; do
ipset add t1 1.2.$((i / 255)).$((i % 255))
done
t1_init="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset create t2 hash:ip
for i in `seq 1 4360`; do
ipset add t2 1.2.$((i / 255)).$((i % 255))
done
t2_init="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset swap t1 t2
t1_swap="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
t2_swap="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset destroy t1
ipset destroy t2
tries=$((tries + 1))
if [ ${t1_init} -lt 10000 ] || [ ${t2_init} -lt 10000 ]; then
echo "FAIL after ${tries} tries:"
echo "T1 size ${t1_init}, after swap ${t1_swap}"
echo "T2 size ${t2_init}, after swap ${t2_swap}"
exit 1
fi
done
echo "PASS"
# echo -n 'func hash_ip4_resize +p' > /sys/kernel/debug/dynamic_debug/control
# ./hash_ip_size.sh
[ 2035.018673] attempt to resize set t1 from 10 to 11, t 00000000fe6551fa
[ 2035.078583] set t1 resized from 10 (00000000fe6551fa) to 11 (00000000172a0163)
[ 2035.080353] Table destroy by resize 00000000fe6551fa
FAIL after 4 tries:
T1 size 9064, after swap 71128
T2 size 71128, after swap 9064
Reported-by: NOYB <JunkYardMail1@Frontier.com>
Fixes: 9e41f26a50 ("netfilter: ipset: Count non-static extension memory for userspace")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
In dump_init() the outdated comment was incorrect and we had a missing
validation check of nla_parse_deprecated().
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
When nla_parse fails, we should not use the results (the first
argument). The fix checks if it fails, and if so, returns its error code
upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Both functions are using exactly the same code, except the command value
passed to call_ad function.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
One of the memset call is buggy: it does not erase full array, but only pointer size.
Moreover, after a check, first step of nla_parse_nested/nla_parse is to
erase tb array as well. We can remove both calls safely.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
There's some discussion on how to do this the best, and Tejun prefers
that BFQ just create the file itself instead of having cgroups support
a symlink feature.
Hence revert commit 54b7b868e8 and 19e9da9e86 for 5.2, and this
can be done properly for 5.3.
Signed-off-by: Jens Axboe <axboe@kernel.dk>