Chris reported that commit 24d5a3bffef1 ("lockdep: Fix
usage_traceoverflow") breaks the nr_unused_locks validation code
triggered by /proc/lockdep_stats.
By fully splitting LOCK_USED and LOCK_USED_READ it becomes a bad
indicator for accounting nr_unused_locks; simplyfy by using any first
bit.
Fixes: 24d5a3bffef1 ("lockdep: Fix usage_traceoverflow")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lkml.kernel.org/r/20201027124834.GL2628@hirez.programming.kicks-ass.net
I initially thought raw_cpu_read() was OK, since if it is !0 we have
IRQs disabled and can't get migrated, so if we get migrated both CPUs
must have 0 and it doesn't matter which 0 we read.
And while that is true; it isn't the whole store, on pretty much all
architectures (except x86) this can result in computing the address for
one CPU, getting migrated, the old CPU continuing execution with another
task (possibly setting recursion) and then the new CPU reading the value
of the old CPU, which is no longer 0.
Similer to:
baffd723e4 ("lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201026152256.GB2651@hirez.programming.kicks-ass.net
On a system without uniform support for AArch32 at EL0, it is possible
for the guest to force run AArch32 at EL0 and potentially cause an
illegal exception if running on a core without AArch32. Add an extra
check so that if we catch the guest doing that, then we prevent it from
running again by resetting vcpu->arch.target and return
ARM_EXCEPTION_IL.
We try to catch this misbehaviour as early as possible and not rely on
an illegal exception occuring to signal the problem. Attempting to run a
32bit app in the guest will produce an error from QEMU if the guest
exits while running in AArch32 EL0.
Tested on Juno by instrumenting the host to fake asym aarch32 and
instrumenting KVM to make the asymmetry visible to the guest.
[will: Incorporated feedback from Marc]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201021104611.2744565-2-qais.yousef@arm.com
Link: https://lore.kernel.org/r/20201027215118.27003-2-will@kernel.org
Some (apparently older) versions of the FEC hardware block do not like
the MMFR register being cleared to avoid generation of MII events at
initialization time. The action of clearing this register results in no
future MII events being generated at all on the problem block. This means
the probing of the MDIO bus will find no PHYs.
Create a quirk that can be checked at the FECs MII init time so that
the right thing is done. The quirk is set as appropriate for the FEC
hardware blocks that are known to need this.
Fixes: f166f890c8 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Fugang Duan <fugand.duan@nxp.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Link: https://lore.kernel.org/r/20201028052232.1315167-1-gerg@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TIPC reserves 64 service types for current and future internal use.
Therefore, the bind() function is meant to block regular user sockets
from being bound to these values, while it should let through such
bindings from internal users.
However, since we at the design moment saw no way to distinguish
between regular and internal users the filter function ended up
with allowing all bindings of the reserved types which were really
in use ([0,1]), and block all the rest ([2,63]).
This is risky, since a regular user may bind to the service type
representing the topology server (TIPC_TOP_SRV == 1) or the one used
for indicating neighboring node status (TIPC_CFG_SRV == 0), and wreak
havoc for users of those services, i.e., most users.
The reality is however that TIPC_CFG_SRV never is bound through the
bind() function, since it doesn't represent a regular socket, and
TIPC_TOP_SRV can also be made to bypass the checks in tipc_bind()
by introducing a different entry function, tipc_sk_bind().
It should be noted that although this is a change of the API semantics,
there is no risk we will break any currently working applications by
doing this. Any application trying to bind to the values in question
would be badly broken from the outset, so there is no chance we would
find any such applications in real-world production systems.
v2: Added warning printout when a user is blocked from binding,
as suggested by Jakub Kicinski
Acked-by: Yung Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20201030012938.489557-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_tnl_encap assigns to proto transport protocol which
encapsulates inner packet, but we must pass to set_inner_ipproto
protocol of that inner packet.
Calling set_inner_ipproto after ip6_tnl_encap might break gso.
For example, in case of encapsulating ipv6 packet in fou6 packet, inner_ipproto
would be set to IPPROTO_UDP instead of IPPROTO_IPV6. This would lead to
incorrect calling sequence of gso functions:
ipv6_gso_segment -> udp6_ufo_fragment -> skb_udp_tunnel_segment -> udp6_ufo_fragment
instead of:
ipv6_gso_segment -> udp6_ufo_fragment -> skb_udp_tunnel_segment -> ip6ip6_gso_segment
Fixes: 6c11fbf97e ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Link: https://lore.kernel.org/r/20201029171012.20904-1-ovov@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for getting the state of multiple pins using a minimum of
register reads.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reuse gpio_rcar_info inside gpio_rcar_priv instead of duplicating the
individual members, so gpio_rcar_parse_dt() can copy them in one go.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Improve readability by aligning the offsets in the register definitions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Since commit 43c54ecade ("gpio: move the subdriver data pointer
into gpio_device") changed gpiochip_get_data() to an out-of-line
function, it is now worthwhile to avoid multiple calls in a row by
caching its return value in a local variable.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add GPIO_V2_LINE_FLAG_EDGE_BOTH macro and use it in edge_irq_thread() to
improve readability of edge handling cases.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
etnaviv_iommu_find_iova has it so etnaviv_iommu_insert_exact and
lockdep_assert_held should have it as well.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Mark flush request as IDLE in its .end_io(), aligning it with how normal
requests behave. The flush request stays in in-flight tags if we're not
using an IO scheduler, so we need to change its state into IDLE.
Otherwise, we will hang in blk_mq_tagset_wait_completed_request() during
error recovery because flush the request state is kept as COMPLETED.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Chao Leng <lengchao@huawei.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ibx_irq_pre_postinstall() looks totally pointless. We can just
init both SDEIMR and SDEIER at the same time before enabling the
master interrupt. It's equally racy as the other order due
to doing all of this from the postinstall stage with the interrupt
handler already in place. That is, safe with MSI but racy with
shared legacy interrupts. Fortunately we should have MSI on all ilk+.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-20-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Let's enable the hardware hpd logic only for the ports we
can actually use.
In theory this may save some miniscule amounts of power,
and more importantly it eliminates a lot if platform specific
codepaths since the generic thing can now deal with any
combination of ports being present on each SKU.
v2: Deal with DG1
v3: Deal with DG1 some more
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-18-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
The IP's DMA capabilities are described in the SoC dtsi, to spare
users duplicating the DMA bindings in their board device tree. Users
that don't want to use DMA, have to overwrite the DMA bindings in
their board device tree. An example is:
commit ddcdaeb882 ("ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions")
When the DMA bindings are overwritten, one could see on the console:
atmel_spi fc018400.spi: error -ENODEV: No TX DMA channel, DMA is disabled
atmel_spi fc018400.spi: Atmel SPI Controller using PIO only
Choosing to not use DMA is not a reason to print an error message.
More, the user is already informed when PIO is used: "Atmel SPI Controller
using PIO only". Downgrade to dev_dbg when dma_request_chan() fails.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201030121116.869105-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We no longer unmask all HPD irqs, so we can drop the ugly per-platform
HPD IIR masking. IMR will prevent unsupported bits from appearing in
IIR.
v2: Deal with DG1
Include "HOTPLUG" in the mask names (Lucas)
v3: Fix typos in subject
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-17-ville.syrjala@linux.intel.com
No reason that I can see why we should enable the hpd detection logic
already during irq postinstall phase. We don't even do this on all
the platforms. We just need it before we actually enable the hotplug
interrupts in .hpd_irq_setup(), and in fact we already do it there as
well. Let's just eliminate the redundant early setup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-15-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use hpd_pin to parametrize BXT_DE_PORT_HP_DDI() to make it clear
these have nothing to do with DDI ports or PHYs as such. The only
thing that matters is the HPD pin assignment.
v2: Remember the gvt
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-8-ville.syrjala@linux.intel.com
Let's make the AUX CH names match the spec (AUX A-F for pre-tgl,
AUX A-C or AUX USBC1-6 for tgl+). And while at it let's include
the full encoder name in the AUX CH name as well (as opposed to
just using port_name() which wouldn't give us the right thing on
tgl+).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-6-ville.syrjala@linux.intel.com
Let's pimp the DDI encoder->name to reflect what the spec calls them.
Ie. on pre-tgl DDI A-F, on tgl+ DDI A-C or DDI TC1-6.
Also since each encoder is really a combination of the DDI and the PHY
we include the PHY name as well.
ICL is a bit special since it already has the two different types
of DDIs (combo or TC) but it still calls them just DDI A-F regarless
of the type. For that let's add an extra "(TC)" note to remind
is which type of DDI it really is.
The code is darn ugly, but not sure there's much we can do about it.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-4-ville.syrjala@linux.intel.com
This contains one core fix and a few driver fixes.
- Fix the core to perform also aggregation when setting the initial
bandwidth with sync_state.
- Fixes in some drivers to make sure the correct sequence is used for
initialization when we use sync_state.
- Fix in the sdm845 driver to prevent a board hang that was hit when
bandwidth scaling for display and multimedia was enabled.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Z+xC
-----END PGP SIGNATURE-----
Merge tag 'icc-5.10-rc2' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-linus
Georgi writes:
interconnect fixes for v5.10
This contains one core fix and a few driver fixes.
- Fix the core to perform also aggregation when setting the initial
bandwidth with sync_state.
- Fixes in some drivers to make sure the correct sequence is used for
initialization when we use sync_state.
- Fix in the sdm845 driver to prevent a board hang that was hit when
bandwidth scaling for display and multimedia was enabled.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.10-rc2' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: qcom: use icc_sync state for sm8[12]50
interconnect: qcom: Ensure that the floor bandwidth value is enforced
interconnect: qcom: sc7180: Init BCMs before creating the nodes
interconnect: qcom: sdm845: Init BCMs before creating the nodes
interconnect: Aggregate before setting initial bandwidth
interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
After I sent a fix for what appeared to be a harmless warning in
the wimax user interface code, the conclusion was that the whole
thing has most likely not been used in a very long time, and the
user interface possibly been broken since b61a5eea59 ("wimax: use
genl_register_family_with_ops()").
Using a shared branch between net-next and staging should help
coordinate patches getting submitted against it.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl+bLh4ACgkQmmx57+YA
GNkTuhAAkbL/tqJhjC2KzL+B7iFvPOk4eTu9T1g+4K67oUrSTPRi5J0rGhBuv2FL
feNHR8a8fxBueZVKLM9cy4jdzROFr/tsLQEp0HzdNDTeIDoUi1WFTEkjj8zj5NUW
BRriYfroR+ClIw6/OwW2A17838h5DERpLQqm5Y2E8KNLkmpG3rqs4i6zrcEaJne8
0R51ZkcWq4Umn/mfzp5FCGLsOd8h+udgxmbTSNUEiB9X85vLs1i9gl/WPbfnq/eV
m0uqgkagRGg71BLPvXEvjQY533KYFJMxk+01ZpNkZArpNLpvnFHa/Aw48XjidrOS
FJzYNhtuunH/3SFYXZKJ5gzLJZdyLsH2lEfJZRo/YlwqzeiiXmdJmgH3wE9JRwKG
In/8BI0epjr0+G5caJnoaKSisLI0MC7cEyOJ+TMDSETFcFbjAMnduMK4zHR+cYMV
tzserwN7EmHqJFQ0Qou9/CIsClCuFcWoJvFQL9RxrlKfjVZqGuT96bk6Xu89IZNZ
PP7vJvDdCLlpPq1T4M05stWpCXdt7comi2NbI0Ekh2VoAhpHjUh9Qvp+iM99GIsZ
RvpAPMYVYahP3IYlYY7T2X+5Ai5lMdi1cWJilQB9R+bveJogdQTrCceMWNvNss0T
3DfqZmAJH6l0eOrZMadb4qwHdc+4eXroTItay8XIPzDD9J7LoTg=
=PyFd
-----END PGP SIGNATURE-----
Merge tag 'wimax-staging' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into staging-next
Arnd writes:
wimax: move to staging
After I sent a fix for what appeared to be a harmless warning in
the wimax user interface code, the conclusion was that the whole
thing has most likely not been used in a very long time, and the
user interface possibly been broken since b61a5eea59 ("wimax: use
genl_register_family_with_ops()").
Using a shared branch between net-next and staging should help
coordinate patches getting submitted against it.
* tag 'wimax-staging' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
wimax: move out to staging
wimax: fix duplicate initializer warning
The ABI files are supposed to be unique. Yet,
in the specific case of hw_pattern, there are some duplicated
entries as warned by scripts/get_abi.pl:
Warning: /sys/class/leds/<led>/hw_pattern is defined 3 times: Documentation/ABI/testing/sysfs-class-led-trigger-pattern:14 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx:0 Documentation/ABI/testing/sysfs-class-led-driver-el15203000:0
Drop the duplication from the ABI files, moving the specific
definitions to files inside Documentation/leds.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/038e57881550550b298e598f8f9b7f20515cbe15.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both adp8860 and adp8870 define some extensions to the
backlight class. This causes warnings:
Warning: /sys/class/backlight/<backlight>/ambient_light_level is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_level:8 /sys/class/backlight/<backlight>/ambient_light_level:30
Warning: /sys/class/backlight/<backlight>/ambient_light_zone is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_zone:18 /sys/class/backlight/<backlight>/ambient_light_zone:40
As ABI definitions shouldn't be duplicated.
Unfortunately, the ABI is dependent on the specific device
features. As such, ambient_light_level range is somewhat
different among the supported devices.
The ambient_light_zone is even worse: the meanings of each
preset are different, and there's no ABI to retrieve
the supported types nor their meanins. Unfortunately,
it is too late to fix it without causing regressions,
as this has been used since Kernel v2.6.35.
Rewrite those ABI documentation using the current documentation
as a reference, and double-checking at the datasheets:
https://www.analog.com/media/en/technical-documentation/data-sheets/ADP8870.pdfhttps://www.analog.com/media/en/technical-documentation/data-sheets/ADP8860.pdf
in order to properly document the differences between those two
drivers.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/342195ad5a819d9bcfcebc133c77ab69b4211672.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As warned by scripts/get_abi.pl:
Warning: /sys/class/c2port/c2portX/flash_erase is defined 2 times: Documentation/ABI/testing/sysfs-c2port:60 Documentation/ABI/testing/sysfs-c2port:68
This entry was added twice at the same patch. Probalby a
cut-and paste issue.
Fixes: 4e17e1db96 ("Add c2 port support")
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4ea2b31ddc76161fbae004f2f2ed91dfb757703f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ABI is not supposed to have duplicated entries, as warned
by get_abi.pl:
$ ./scripts/get_abi.pl validate 2>&1|grep sysfs-class-power
Warning: /sys/class/power_supply/<supply_name>/current_avg is defined 2 times: Documentation/ABI/testing/sysfs-class-power:108 Documentation/ABI/testing/sysfs-class-power:391
Warning: /sys/class/power_supply/<supply_name>/current_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:121 Documentation/ABI/testing/sysfs-class-power:404
Warning: /sys/class/power_supply/<supply_name>/current_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:130 Documentation/ABI/testing/sysfs-class-power:414
Warning: /sys/class/power_supply/<supply_name>/temp is defined 2 times: Documentation/ABI/testing/sysfs-class-power:281 Documentation/ABI/testing/sysfs-class-power:493
Warning: /sys/class/power_supply/<supply_name>/temp_alert_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:291 Documentation/ABI/testing/sysfs-class-power:505
Warning: /sys/class/power_supply/<supply_name>/temp_alert_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:306 Documentation/ABI/testing/sysfs-class-power:521
Warning: /sys/class/power_supply/<supply_name>/temp_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:322 Documentation/ABI/testing/sysfs-class-power:537
Warning: /sys/class/power_supply/<supply_name>/temp_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:333 Documentation/ABI/testing/sysfs-class-power:547
Warning: /sys/class/power_supply/<supply_name>/voltage_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:356 Documentation/ABI/testing/sysfs-class-power:571
Warning: /sys/class/power_supply/<supply_name>/voltage_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:367 Documentation/ABI/testing/sysfs-class-power:581
Warning: /sys/class/power_supply/<supply_name>/voltage_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:378 Documentation/ABI/testing/sysfs-class-power:591
Yet, both USB and Battery share a common set of charging-related
properties.
Unify the entries for such properties in order to avoid
duplication, while preserving the battery and USB-specific
data properly documented.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/bcdf5f76326ea48a990a7cac612af216c387537d.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This ABI is defined twice, one for normal leds and another
one for multicolor ones.
Ensure that just one definition is there at ABI.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1115022e7f172b19ee8610f2ad28cc2f0ca93592.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perhaps due to a wrong cut-and-paste, this entry:
What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
was added twice by the same patch, one following the other.
Remove the duplication.
Fixes: c2e5df616e ("vmbus: add per-channel sysfs info")
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/091e8de5543c280ceb47edcb3ab6d0e9f3fa085b.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.
Address them, in order to provide a clean output.
Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager
Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs
Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This ABI is not following the format described at ABI/README.
Use it, filling in the blanks with the git log that added it,
and using the current e-mail from Dan.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9ec379cbf6dcf65ce3039c3671baf7bcaea532f4.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This ABI is not following the format described at ABI/README.
Use it, filling in the blanks with the git log that added it,
and using the current e-mail from Andy.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/28c7cf3a71e15fb7499b70ec8f38c2efaaf4add2.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
