Currently, the i2c adapter is available only under DP connectors.
Add i2c symlink under hdmi connector pointing to i2c adapter in order to
make this behaviour consistent.
The initial motivation was to make igt i2c subtest
patch [1] work on all connectors.
[1]: https://patchwork.freedesktop.org/series/60357/
v2:
- Moved symlink remove to unregister (Ville)
- Clarified commit message (Jani)
- Changed WARN to DRM_ERROR (Jani)
- Minor codestyle changes proposed by Jani
v3: added blank line
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190520150642.3477-1-oleg.vasilev@intel.com
Rock Pi 4 has a on board AP6256 WiFi/BT Module. enable wifi and bluetooth
support on Rock Pi 4 board.
Signed-off-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
isp iommu requires wrapper variants of the clocks.
noc variants are always on and using the wrapper variants will activate
{A,H}CLK_ISP{0,1} due to the hierarchy.
Tested using the pending isp patch set (which is not upstream
yet). Without this patch, streaming from the isp stalls.
Also add the respective power domain and remove the "disabled" status.
Refer:
RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram
RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is the same as the other PWMs on this SoC and uses 3 cells.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With commit 997dd96471 ("net: IP6 defrag: use rbtrees in
nf_conntrack_reasm.c"), nf_ct_frag6_reasm() is now called from
nf_ct_frag6_queue(). With this change, nf_ct_frag6_queue() can fail
after the skb has been added to the fragment queue and
nf_ct_frag6_gather() was adapted to handle this case.
But nf_ct_frag6_queue() can still fail before the fragment has been
queued. nf_ct_frag6_gather() can't handle this case anymore, because it
has no way to know if nf_ct_frag6_queue() queued the fragment before
failing. If it didn't, the skb is lost as the error code is overwritten
with -EINPROGRESS.
Fix this by setting -EINPROGRESS directly in nf_ct_frag6_queue(), so
that nf_ct_frag6_gather() can propagate the error as is.
Fixes: 997dd96471 ("net: IP6 defrag: use rbtrees in nf_conntrack_reasm.c")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sync with binutils and add a couple of missing instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
randomize_stack_top() checks for current task flag PF_RANDOMIZE in order
to use stack randomization and PF_RANDOMIZE is set when
ADDR_NO_RANDOMIZE is unset, so no need to check for ADDR_NO_RANDOMIZE
in stack_maxrandom_size.
[heiko.carstens@de.ibm.com]: See also commit 01578e3616 ("x86/elf:
Remove the unnecessary ADDR_NO_RANDOMIZE checks")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Since commit 4c0f032d49 ("s390/purgatory: Omit use of bin2c"),
kexec-purgatory.c is not generated.
purgatory and purgatory.lds are generated files, so should be ignored
by git.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
'targets' should be specified to include .*.cmd files to evaluate
if_changed or friends.
Here, facility-defs.h and dis-defs.h are generated by filechk.
Because filechk does not generate .*.cmd file, the 'targets' addition
is meaningless. The filechk correctly updates the target when its
content is changed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
As you can see in scripts/Kbuild.include, the filechk creates the
parent directory of the target as needed.
This Makefile does not need to explicitly create the directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The top level Makefile adds -Wall globally for all host tools:
KBUILD_HOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
I see two "-Wall" added for compiling these tools.
Of course, it is allowed to pass the same option multiple times, but
we do not need to do so.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
I guess HOSTCFLAGS_gen_opcode_table.o was blindly copied from
HOSTCFLAGS_gen_facilities.o
The reason of adding $(LINUXINCLUDE) to HOSTCFLAGS_gen_facilities.o
is because gen_facilities.c references some CONFIG options. (Kbuild
does not cater to this for host tools automatically.)
On the other hand, gen_opcode_table.c does not reference CONFIG
options at all. So, there is no good reason to pass $(LINUXINCLUDE).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Use the new struct_size() helper to keep code simple.
Signed-off-by: xiaolinkui <xiaolinkui@kylinos.cn>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The use of stop_machine to replace the mask bits of the jump label branch
is a very heavy-weight operation. This is in fact not necessary, the
mask of the branch can simply be updated, followed by a signal processor
to all the other CPUs to force them to pick up the modified instruction.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[heiko.carstens@de.ibm.com]: Change jump_label_make_nop() so we get
brcl 0,offset instead of brcl 0,0. This
makes sure that only the mask part of the
instruction gets changed when updated.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
This change makes CONFIG_ZONE_DMA32 defuly y and allows users
to overwrite it only when CONFIG_EXPERT=y.
For the SoCs that do not need CONFIG_ZONE_DMA32, this is the
first step to manage all available memory by a single
zone(normal zone) to reduce the overhead of multiple zones.
The change also fixes a build error when CONFIG_NUMA=y and
CONFIG_ZONE_DMA32=n.
arch/arm64/mm/init.c:195:17: error: use of undeclared identifier 'ZONE_DMA32'
max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());
Change since v1:
1. only expose CONFIG_ZONE_DMA32 when CONFIG_EXPERT=y
2. remove redundant IS_ENABLED(CONFIG_ZONE_DMA32)
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Even though they have got the same value, PMD_TYPE_SECT and PUD_TYPE_SECT
get used for kernel huge mappings. But before that first the table bit gets
cleared using leaf level PTE_TABLE_BIT. Though functionally they are same,
we should use page table level specific macros to be consistent as per the
MMU specifications. Create page table level specific wrappers for kernel
huge mapping entries and just drop mk_sect_prot() which does not have any
other user.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
cache_line_size is derived from CTR_EL0.CWG field and is called mostly
for I/O device drivers. For some platforms like the HiSilicon Kunpeng920
server SoC, cache line sizes are different between L1/2 cache and L3
cache while L1 cache line size is 64-byte and L3 is 128-byte, but
CTR_EL0.CWG is misreporting using L1 cache line size.
We shall correct the right value which is important for I/O performance.
Let's update the cache line size if it is detected from DT or PPTT
information.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Reported-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add coherency_max_size variable to record the maximum cache line size
for different cache levels. If it is available, we will synchronize
it as cache line size, otherwise we will use CTR_EL0.CWG reporting
in cache_line_size() for arm64.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
H6 DMA has more than 32 supported DRQs, which means that configuration
register is slightly rearranged. It also needs additional clock to be
enabled.
Add support for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
H6 DMA has mode fields in different position than any other currently
supported DMA controller.
Add a quirk for that.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
H6 DMA has more than 32 possible DRQs. That means that current maximum
of 31 DRQs is not enough anymore.
Add a quirk which will set source and destination DRQ number.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
H6 DMA controller needs additional mbus clock to be enabled.
Add a quirk for it and handle it accordingly.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA in H6 is similar to other DMA controller, except it is first which
supports more than 32 request sources and has 16 channels. It also needs
additional clock to be enabled.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the kernel is compiled with CONFIG_KERNEL_MODE_NEON, some part of
the kernel may be able to use FPSIMD/SVE. This is for instance the case
for crypto code.
Any use of FPSIMD/SVE in the kernel are clearly marked by using the
function kernel_neon_{begin, end}. Furthermore, this can only be used
when may_use_simd() returns true.
The current implementation of may_use_simd() allows softirq to use
FPSIMD/SVE unless it is currently in use (i.e kernel_neon_busy is true).
When in use, softirqs usually fall back to a software method.
At the moment, as a softirq may use FPSIMD/SVE, softirqs are disabled
when touching the FPSIMD/SVE context. This has the drawback to disable
all softirqs even if they are not using FPSIMD/SVE.
Since a softirq is supposed to check may_use_simd() anyway before
attempting to use FPSIMD/SVE, there is limited reason to keep softirq
disabled when touching the FPSIMD/SVE context. Instead, we can simply
disable preemption and mark the FPSIMD/SVE context as in use by setting
CPU's fpsimd_context_busy flag.
Two new helpers {get, put}_cpu_fpsimd_context are introduced to mark
the area using FPSIMD/SVE context and they are used to replace
local_bh_{disable, enable}. The functions kernel_neon_{begin, end} are
also re-implemented to use the new helpers.
Additionally, double-underscored versions of the helpers are provided to
called when preemption is already disabled. These are only relevant on
paths where irqs are disabled anyway, so they are not needed for
correctness in the current code. Let's use them anyway though: this
marks critical sections clearly and will help to avoid mistakes during
future maintenance.
The change has been benchmarked on Linux 5.1-rc4 with defconfig.
On Juno2:
* hackbench 100 process 1000 (10 times)
* .7% quicker
On ThunderX 2:
* hackbench 1000 process 1000 (20 times)
* 3.4% quicker
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The only external user of fpsimd_save() and fpsimd_flush_cpu_state() is
the KVM FPSIMD code.
A following patch will introduce a mechanism to acquire owernship of the
FPSIMD/SVE context for performing context management operations. Rather
than having to export the new helpers to get/put the context, we can just
introduce a new function to combine fpsimd_save() and
fpsimd_flush_cpu_state().
This has also the advantage to remove any external call of fpsimd_save()
and fpsimd_flush_cpu_state(), so they can be turned static.
Lastly, the new function can also be used in the PM notifier.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The function sve_flush_cpu_state() has been removed in commit 21cdd7fd76
("KVM: arm64: Remove eager host SVE state saving").
So remove the associated prototype in asm/fpsimd.h.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Apparently driver was never tested with DMA_PREP_INTERRUPT flag being
unset since it completely disables interrupt handling instead of skipping
the callbacks invocations, hence putting channel into unusable state.
The flag is always set by all of kernel drivers that use APB DMA, so let's
error out in otherwise case for consistency. It won't be difficult to
support that case properly if ever will be needed.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The trace buffer address is 40 bits wide.
The end of the buffer is set in the RWP register (lower 32 bits), and in
the RWPHI register (upper 8 bits).
Currently only the lower 32 bits are read, and this patch fixes it and
concatenates the upper 8 bits to the output address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
To avoid testcase failures we need to enable the pgstes. This can be
done with /proc/sys/vm/allocate_pgste or with a linker option that
creates an S390_PGSTE program header.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Fixed as outlined by kernel test robot <rong.a.chen@intel.com>]
There is nothing x86-specific in the test apart from the VM_MODE_P52V48_4K
which we can now replace with VM_MODE_DEFAULT. Thus let's move the file to
the main folder and enable it for aarch64 and s390x, too.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-10-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The test is an adaption of the same test for x86. Note that there
are some differences in the way how s390x deals with the kvm_valid_regs
in struct kvm_run, so some of the tests had to be removed. Also this
test is not using the ucall() interface on s390x yet (which would need
some work to be usable on s390x), so it simply drops out of the VM with
a diag 0x501 breakpoint instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-8-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Code that takes care of basic CPU setup, page table walking, etc.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-7-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On s390x, there is a constraint that memory regions have to be aligned
to 1M (or running the VM will fail). Introduce a new "alignment" variable
in the vm_userspace_mem_region_add() function which now can be used for
both, huge page and s390x alignment requirements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-6-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[prepare for THP as outlined by Andrew Jones]
This will be required later for tests like the kvm_create_max_vcpus
test that do not use the vm_create_default() function.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-5-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The struct kvm_vcpu_events code is only available on certain architectures
(arm, arm64 and x86). To be able to compile kvm_util.c also for other
architectures, we have to fence the code with __KVM_HAVE_VCPU_EVENTS.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-3-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When an error occurs we should clean the error register then to return
Signed-off-by: Peng Ma <peng.ma@nxp.com>
[vkoul: change patch title]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
CMD of Source/Destination descriptor format should be lower of
struct fsl_qdma_engine number data address.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Dropped static functions from kernel documentation.
v2: Dropped the comments altogether for static functions,
as the definitions seems self explanatory.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559567330-25182-4-git-send-email-uma.shankar@intel.com
Fixes the following warnings:
./include/drm/drm_mode_config.h:841: warning: Incorrect use of
kernel-doc format: * hdr_output_metadata_property: Connector
property containing hdr
./include/drm/drm_mode_config.h:918: warning: Function parameter or member 'hdr_output_metadata_property' not described in 'drm_mode_config'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_output_metadata' not described in 'drm_connector'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_sink_metadata' not described in 'drm_connector'
Also adds some property documentation for HDR Metadata Connector
Property in connector property create function.
v2: Fixed Sean Paul's review comments.
v3: Fixed Daniel Vetter's review comments, added the UAPI structure
definition section in kernel docs.
v4: Fixed Daniel Vetter's review comments.
v5: Added structure member references as per Daniel's suggestion.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Sean Paul <sean@poorly.run> (v1)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
[danvet: Fix up markup: () for functions, & for structs. Style guide
also recommends to prepend struct for structures.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559647022-7336-1-git-send-email-uma.shankar@intel.com
Convert the serial modem control signals to use the gpiod APIs rather
than the private platform callbacks.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Remove the empty serial modem control signal functions from hackkit
as these are unnecessary - the core code can copes fine without
these.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the iPAQ H3xxx serial modem control signals to use the gpiod
APIs rather than custom callbacks into platform code.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the Assabet serial modem control signals to use the gpiod APIs
rather than custom callbacks into platform code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
As suggested by Uwe, add a note indicating that the modem control
signals do not support interrupts, which precludes the driver from
using mctrl_gpio_init().
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>