This extends the checkpoint option to allow checkpoint=disable:%u[%]
This allows you to specify what how much of the disk you are willing
to lose access to while mounting with checkpoint=disable. If the amount
lost would be higher, the mount will return -EAGAIN. This can be given
as a percent of total space, or in blocks.
Currently, we need to run garbage collection until the amount of holes
is smaller than the OVP space. With the new option, f2fs can mark
space as unusable up front instead of requiring garbage collection until
the number of holes is small enough.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fixes possible underflows when dealing with unusable blocks.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
On a remount, you can currently set root reserved if it was not
previously set. This can cause an underflow if reserved has been set to
a very high value, since then root reserved + current reserved could be
greater than user_block_count. inc_valid_block_count later subtracts out
these values from user_block_count, causing an underflow.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The existing threshold for allowable holes at checkpoint=disable time is
too high. The OVP space contains reserved segments, which are always in
the form of free segments. These must be subtracted from the OVP value.
The current threshold is meant to be the maximum value of holes of a
single type we can have and still guarantee that we can fill the disk
without failing to find space for a block of a given type.
If the disk is full, ignoring current reserved, which only helps us,
the amount of unused blocks is equal to the OVP area. Of that, there
are reserved segments, which must be free segments, and the rest of the
ovp area, which can come from either free segments or holes. The maximum
possible amount of holes is OVP-reserved.
Now, consider the disk when mounting with checkpoint=disable.
We must be able to fill all available free space with either data or
node blocks. When we start with checkpoint=disable, holes are locked to
their current type. Say we have H of one type of hole, and H+X of the
other. We can fill H of that space with arbitrary typed blocks via SSR.
For the remaining H+X blocks, we may not have any of a given block type
left at all. For instance, if we were to fill the disk entirely with
blocks of the type with fewer holes, the H+X blocks of the opposite type
would not be used. If H+X > OVP-reserved, there would be more holes than
could possibly exist, and we would have failed to find a suitable block
earlier on, leading to a crash in update_sit_entry.
If H+X <= OVP-reserved, then the holes end up effectively masked by the OVP
region in this case.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Herbert Xu pointed out that commit bb73c52bad ("rcu: Don't disable
preemption for Tiny and Tree RCU readers") was incorrect in making the
preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT.
If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is
a no-op, but still is a compiler barrier.
And RCU locking still _needs_ that compiler barrier.
It is simply fundamentally not true that RCU locking would be a complete
no-op: we still need to guarantee (for example) that things that can
trap and cause preemption cannot migrate into the RCU locked region.
The way we do that is by making it a barrier.
See for example commit 386afc9114 ("spinlocks and preemption points
need to be at least compiler barriers") from back in 2013 that had
similar issues with spinlocks that become no-ops on UP: they must still
constrain the compiler from moving other operations into the critical
region.
Now, it is true that a lot of RCU operations already use READ_ONCE() and
WRITE_ONCE() (which in practice likely would never be re-ordered wrt
anything remotely interesting), but it is also true that that is not
globally the case, and that it's not even necessarily always possible
(ie bitfields etc).
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: bb73c52bad ("rcu: Don't disable preemption for Tiny and Tree RCU readers")
Cc: stable@kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop the reference to a device found via bus_find_device()
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Message-Id: <1559577023-558-3-git-send-email-suzuki.poulose@arm.com>
[Moved the put_device() to after the platform_device_unregister(), for
better style.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Trim and reorganize the defconfig with savedefconfig on latest
linux-next. The ARCH_EXYNOS3 is removed because it become the default.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a couple of new debugfs entries "ipc_flood_count"
and "ipc_flood_duration_ms" that can be used to
execute the IPC flood test. "ipc_flood_count" floods the DSP
with the number of test IPCs specified and ipc_flood_duration_ms
floods the DSP with test IPC's for the duration(in ms) specified.
The test stats such as average, min and max IPC response times
are logged in the dmesg and saved in the debugfs entry cache buffer.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new class of IPC command along with the first
test type, IPC_FLOOD, which will be used for flooding the DSP
with IPCs.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Timer will be reset when DSP is powered down. So the time stamp of trace
log will be reset after resume. Send time stamp to FW can align the time
stamp and avoid reset time stamp in trace log.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the nds32 patchset based on 5.2-rc1
Contained in here are
1. fix warning for math-emu
2. fix nds32 fpu exception handling
3. fix nds32 fpu emulation implementation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=kAV3
-----END PGP SIGNATURE-----
Merge tag 'nds32-for-linux-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 fixes from Greentime Hu:
- fix warning for math-emu
- fix nds32 fpu exception handling
- fix nds32 fpu emulation implementation
* tag 'nds32-for-linux-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: add new emulations for floating point instruction
nds32: Avoid IEX status being incorrectly modified
math-emu: Use statement expressions to fix Wshift-count-overflow warning
Pull sparc fixes from David Miller:
"Three bug fixes, and TLB flushing one is of particular brown paper bag
quality..."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD
mdesc: fix a missing-check bug in get_vdev_port_node_info()
sparc64: Fix regression in non-hypervisor TLB flush xcall
mv88e6xxx_g1_stats_wait has no users outside global1.c, so make it
static.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macros have an extraneous '800' (after 0180C2 there should be just
six nibbles, with X representing one), while the comments have
interchanged c2 and 80 and an extra :00.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
several fixes, some of them for CVEs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJc6/2mAAoJECgfDbjSjVRpoVAIAKjEnHE4tOYBDuFXyQaFz6fy
2MRDALMaIHKM3A5yPZ5hQOWTqngP2kiEOihN/YDr31ZRmzF1Itmff48UrFy0vJnz
2mGkCDCLbEnKbfaWNYYDHOoBqE4hXPqB7PHzv2XiIcRerSZpQvnY44t3OHyMOaEV
uwN6Fie1umz5xaypWQ1OZUuOeolu4T379YTFTDr/txQ9vdZnED2G9mgCOjpAQvBK
9SMbPdylBqns8oOpAncpDBT+f5cIeGok79Lx8/U1a72hKT1I7QSSAXQcD5lhRIMJ
iXH4k94aQgtQeYkx9BnlFLGf2ue6mfqOl3hcVfLuPKAFHjLhX/zy+E7dwn4x62o=
=zlB3
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Several fixes, some of them for CVEs"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: scsi: add weight support
vhost: vsock: add weight support
vhost_net: fix possible infinite loop
vhost: introduce vhost_exceeds_weight()
virtio: Fix indentation of VIRTIO_MMIO
virtio: add unlikely() to WARN_ON_ONCE()
Add enumerations to support mux/demux processing component.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The definitions for DSP oops structures were not aligned
correctly to current FW ABI version 3.6.0, leading to
invalid data being printed out to debug logs. Fix the structs
and update related platform code accordingly.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary condition check and associated goto.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not use any symbols from <linux/gpio.h>
so just drop the include.
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not use any symbols from <linux/gpio.h>
so just drop the include.
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver uses no symbols from <linux/gpio.h> so just drop
this include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Wilco Embedded Controller can create custom events that
are not handled as standard ACPI objects. These events can
contain information about changes in EC controlled features,
such as errors and events in the dock or display. For example,
an event is triggered if the dock is plugged into a display
incorrectly. These events are needed for telemetry and
diagnostics reasons, and for possibly alerting the user.
These events are triggered by the EC with an ACPI Notify(0x90),
and then the BIOS reads the event buffer from EC RAM via an
ACPI method. When the OS receives these events via ACPI,
it passes them along to this driver. The events are put into
a queue which can be read by a userspace daemon via a char device
that implements read() and poll(). The event queue acts as a
circular buffer of size 64, so if there are no userspace consumers
the kernel will not run out of memory. The char device will appear at
/dev/wilco_event{n}, where n is some small non-negative integer,
starting from 0. Standard ACPI events such as the battery getting
plugged/unplugged can also come through this path, but they are
dealt with via other paths, and are ignored here.
To test, you can tail the binary data with
$ cat /dev/wilco_event0 | hexdump -ve '1/1 "%x\n"'
and then create an event by plugging/unplugging the battery.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add soundwire dai type and update ABI version.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The HIPCCTL register controls the IPC interrupts. It can be set or
cleared to mask or enable these interrupts, but it makes no sense to
read and test its fields in an interrupt (which can only executed if
its fields are set).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with Skylake driver and enable the IRQ at end of handler,
instead of at beginning.
Also add an error log if we have nothing to do in this handler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with hardware recommended sequences, and read all IPC registers
before doing any other actions. Playing with BUSY and DONE bits may
invalidate values.
The values read may not actually be necessary but at least this
provides a snapshot of the IPC registers with no consistency issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with Skylake driver and enable the IRQ at end of handler,
instead of at beginning.
Also add an error log if we have nothing to do in this handler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all register access to cnl_ipc_host_done()
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with hardware recommended sequences, and read all IPC registers
before doing any other actions. Playing with BUSY and DONE bits may
invalidate values.
The values read may not actually be necessary but at least this
provides a snapshot of the IPC registers with no consistency issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We use shim registers only to notify the other
side that a message was sent. The actual information
for the message is transmitted via mailbox.
cmd information inside shim register is not used by
the DSP, so we remove it to avoid confusion.
Signed-off-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mode parameter for snd_sof_debugfs_buf_item() to specify
the mode while creating debugfs entries.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Using component driver as a name is not unique and it breaks audio in
certain configurations, e.g. Hardkernel Odroid XU3 board where following
components are registered:
- "3830000.i2s" with driver name "snd_dmaengine_pcm"
- "3830000.i2s-sec" with driver name "snd_dmaengine_pcm"
- "3830000.i2s" with driver name "samsung-i2s"
This reverts commit b19671d6ca.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of identification registers in STM32 SAI.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA_DEV_ASOC type codec device refcounts are managed differently
from HDA_DEV_LEGACY devices. The refcount is released explicitly
in snd_hdac_ext_bus_device_remove() for ASOC type devices.
So, remove the put_device() call in snd_hda_codec_dev_free()
for such devices to make the refcount balanced. This will prevent
the NULL pointer exception when the codec driver is released
after the card is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously the structure used bitfields, which do not guarantee bit
ordering.
This change makes sure the order is clearly defined. It also renames
and repurposes the field for general use.
Signed-off-by: Slawomir Blauciak <slawomir.blauciak@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We had a couple of misses with ABI changes, e.g. for Xtensa oops
information and the integration of sound trigger, before we set-up a
formal process to track evolutions.
With this patch, the SOF kernel patches are officially aligned with
the firmware 3.6 level. Changing this level has no impact on existing
users and is fully backwards-compatible.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add soundwire dai type and update ABI version.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We missed these two definitions for GDB support and component
notifications, they are defined for the SOF firmware. Since they are
not used by the kernel so far, we can still add them without any ABI
change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This tablet has an incorrect acpi identifier just like
Thinkpad10 tablet, which is why it is trying to load the RT5640 driver
instead of the RT5762 driver. The RT5640 driver, on the other hand, checks
the hardware ID, so no driver are loaded during boot. This fix resolves to
load the RT5672 driver on this tablet during boot. It also provides the
correct IO configuration, like the jack detect mode 3, for 1.8V pullup. I
would like to thank Pierre-Louis Bossart for helping with this patch.
Signed-off-by: Kovács Tamás <kepszlok@zohomail.eu>
Signed-off-by: Mark Brown <broonie@kernel.org>
The im_boffset field is in units of bytes, whereas XFS_INO_OFFSET
returns a value in units of inodes. Convert the units so that scrub on
a 64k-block filesystem works correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
PTE_VALID signifies that the last level page table entry is valid and it is
MMU recognized while walking the page table. This is not a software defined
PTE bit and should not be listed like one. Just move it to appropriate
header file.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Replace all open encoded contiguous huge page size computations with
available macro encodings CONT_PTE_SIZE and CONT_PMD_SIZE. There are other
instances where these macros are used in the file and this change makes it
consistently use the same mnemonic.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stephen Rothwell <sfr@canb.auug.org.au> reported:
> After merging the userns tree, today's linux-next build (i386 defconfig)
> produced this warning:
>
> arch/x86/mm/fault.c: In function 'do_sigbus':
> arch/x86/mm/fault.c:1017:22: warning: unused variable 'tsk' [-Wunused-variable]
> struct task_struct *tsk = current;
> ^~~
>
> Introduced by commit
>
> 351b6825b3 ("signal: Explicitly call force_sig_fault on current")
>
> The remaining used of "tsk" are protected by CONFIG_MEMORY_FAILURE.
So do the obvious thing and move tsk inside of CONFIG_MEMORY_FAILURE
to prevent introducing new warnings into the build.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
drm_atomic_set_fence_for_plane() contains the main discussion from a
driver pov, link to that from more places.
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142848.26487-1-daniel.vetter@ffwll.ch
The manufacturer of this board, ships it with various SPI NOR chips and
increments U-Boot bootloader version along the time. There is no way to
tell which is placed on the board since no revision bump takes place.
This creates two issues.
The first, cosmetic. Since the NOR chip may differ, there's message on
boot stating that kernel expected w25q32dw and found different one. To
correct this, remove optional device-specific compatible string. Being
here lets replace bogus "spi-flash" compatible string with proper one.
The second is linked to partitions layout, it changed after commit:
81e7251252 ("arm64: mvebu: config: move env to the end of the 4MB boot
device") in Marvells downstream U-Boot fork [1], shifting environment
location to the end of boot device. Since the new boards will have U-Boot
with this change, it'll lead to improper results writing or reading from
these partitions. We can't tell if users will update bootloader to recent
version provided on manufacturer website, so lets drop partitons layout.
1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Commit 8df39e1687 ("media: dt-bindings: media: Add vendor prefix for
allegro") introduced a new devicetree binding vendors, however with an
improper syntax making the resulting YAML impossible to parse. Let's fix
this.
Fixes: 8df39e1687 ("media: dt-bindings: media: Add vendor prefix for allegro")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The imx_media_pipeline_pad() function return NULL pointers on error, it
never returns error pointers.
Fixes: 3ef46bc97c ("media: staging/imx: Improve pipeline searching")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The variable err is assigned with a value that is never read and
it is re-assigned a new value later on. The assignment is redundant
and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>