Use existing beautifiers for the first 4 args (to/from fds, pathnames)
and wire up the recently introduced move_mount flags table generator.
Now it should be possible to just use:
perf trace -e move_mount
As root and see all move_mount syscalls with its args beautified, except
for the filenames, that need work in the augmented_raw_syscalls.c eBPF
helper to pass more than one, see comment in the
augmented_raw_syscalls.c source code, the other args should work in all
cases, i.e. all that is needed can be obtained directly from the
raw_syscalls:sys_enter tracepoint args.
Running without the strace "skin" (.perfconfig setting output formatting
switches to look like strace output + BPF to collect strings, as we
still need to support collecting multiple string args for the same
syscall, like with move_mount):
# cat sys_move_mount.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#define __NR_move_mount 429
#define MOVE_MOUNT_F_SYMLINKS 0x00000001 /* Follow symlinks on from path */
#define MOVE_MOUNT_F_AUTOMOUNTS 0x00000002 /* Follow automounts on from path */
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */
#define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */
#define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */
#define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */
static inline int sys_move_mount(int from_fd, const char *from_pathname,
int to_fd, const char *to_pathname,
int flags)
{
syscall(__NR_move_mount, from_fd, from_pathname, to_fd, to_pathname, flags);
}
int main(int argc, char *argv[])
{
int flags = 0, from_fd = 0, to_fd = 100;
sys_move_mount(from_fd++, "/foo", to_fd++, "bar", flags);
flags |= MOVE_MOUNT_F_SYMLINKS;
sys_move_mount(from_fd++, "/foo1", to_fd++, "bar1", flags);
flags |= MOVE_MOUNT_F_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo2", to_fd++, "bar2", flags);
flags |= MOVE_MOUNT_F_EMPTY_PATH;
sys_move_mount(from_fd++, "/foo3", to_fd++, "bar3", flags);
flags |= MOVE_MOUNT_T_SYMLINKS;
sys_move_mount(from_fd++, "/foo4", to_fd++, "bar4", flags);
flags |= MOVE_MOUNT_T_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo5", to_fd++, "bar5", flags);
flags |= MOVE_MOUNT_T_EMPTY_PATH;
return sys_move_mount(from_fd++, "/foo6", to_fd++, "bar6", flags);
}
# mv ~/.perfconfig ~/.perfconfig.OFF
# perf trace -e move_mount ./sys_move_mount
0.000 ( 0.009 ms): sys_move_mount/28971 move_mount(from_pathname: 0x402010, to_dfd: 100, to_pathname: 0x402015) = -1 ENOENT (No such file or directory)
0.011 ( 0.003 ms): sys_move_mount/28971 move_mount(from_dfd: 1, from_pathname: 0x40201e, to_dfd: 101, to_pathname: 0x402019, flags: F_SYMLINKS) = -1 ENOENT (No such file or directory)
0.016 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 2, from_pathname: 0x402029, to_dfd: 102, to_pathname: 0x402024, flags: F_SYMLINKS|F_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.020 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 3, from_pathname: 0x402034, to_dfd: 103, to_pathname: 0x40202f, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH) = -1 ENOENT (No such file or directory)
0.023 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 4, from_pathname: 0x40203f, to_dfd: 104, to_pathname: 0x40203a, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS) = -1 ENOENT (No such file or directory)
0.027 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 5, from_pathname: 0x40204a, to_dfd: 105, to_pathname: 0x402045, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.031 ( 0.017 ms): sys_move_mount/28971 move_mount(from_dfd: 6, from_pathname: 0x402055, to_dfd: 106, to_pathname: 0x402050, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS|T_EMPTY_PATH) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-83rim8g4k0s4gieieh5nnlck@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cut'n'paste error, the second comment is about the syscalls that have as
its second arg a string.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zo5s6rloy42u41acsf6q3pvi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to preserve eBPF maps even if they are covered by kcore, because
we need to access eBPF dso for source data.
Add the map_groups__merge_in function to do that. It merges a map into
map_groups by splitting the new map within the existing map regions.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With pgoff set to zero, the map__map_ip function will return BPF
addresses based from 0, which is what we need when we read the data from
a BPF DSO.
Adding BPF symbols with mapped IP addresses as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4eb0681571 ("perf script: Make itrace script default to all
calls") does not work for the case when '--itrace' only is used, because
default_no_sample is not being passed.
Example:
Before:
$ perf record -e intel_pt/cyc/u ls
$ perf script --itrace > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt differ
After:
$ perf script --itrace > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt are identical
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 4eb0681571 ("perf script: Make itrace script default to all calls")
Link: http://lkml.kernel.org/r/20190520113728.14389-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4eb0681571 ("perf script: Make itrace script default to all
calls") does not work because 'use_browser' is being used to determine
whether to default to periodic sampling (i.e. better for perf report).
The result is that nothing but CBR events display for perf script when
no --itrace option is specified.
Fix by using 'default_no_sample' and 'inject' instead.
Example:
Before:
$ perf record -e intel_pt/cyc/u ls
$ perf script > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt differ
After:
$ perf script > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt are identical
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.20+
Fixes: 90e457f7be ("perf tools: Add Intel PT support")
Link: http://lkml.kernel.org/r/20190520113728.14389-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The user's buildid cache may contain entries added by root even if root
has its own home directory (e.g. by using perfconfig to specify the same
buildid dir), so remove that validation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During a suspend/resume, the xenwatch thread waits for all outstanding
xenstore requests and transactions to complete. This does not work
correctly for transactions started by userspace because it waits for
them to complete after freezing userspace threads which means the
transactions have no way of completing, resulting in a deadlock. This is
trivial to reproduce by running this script and then suspending the VM:
import pyxs, time
c = pyxs.client.Client(xen_bus_path="/dev/xen/xenbus")
c.connect()
c.transaction()
time.sleep(3600)
Even if this deadlock were resolved, misbehaving userspace should not
prevent a VM from being migrated. So, instead of waiting for these
transactions to complete before suspending, store the current generation
id for each transaction when it is started. The global generation id is
incremented during resume. If the caller commits the transaction and the
generation id does not match the current generation id, return EAGAIN so
that they try again. If the transaction was instead discarded, return OK
since no changes were made anyway.
This only affects users of the xenbus file interface. In-kernel users of
xenbus are assumed to be well-behaved and complete all transactions
before freezing.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/xen/pvcalls-front.c: In function pvcalls_front_sendmsg:
drivers/xen/pvcalls-front.c:543:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
drivers/xen/pvcalls-front.c: In function pvcalls_front_recvmsg:
drivers/xen/pvcalls-front.c:638:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
They are never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
BPF:
Jiri Olsa:
- Fixup determination of end of kernel map, to avoid having BPF programs,
that are after the kernel headers and just before module texts mixed up in
the kernel map.
tools UAPI header copies:
Arnaldo Carvalho de Melo:
- Update copy of files related to new fspick, fsmount, fsconfig, fsopen,
move_mount and open_tree syscalls.
- Sync cpufeatures.h, sched.h, fs.h, drm.h, i915_drm.h and kvm.h headers.
Namespaces:
Namhyung Kim:
- Add missing byte swap ops for namespace events when processing records from
perf.data files that could have been recorded in a arch with a different
endianness.
- Fix access to the thread namespaces list by using the namespaces_lock.
perf data:
Shawn Landden:
- Fix 'strncat may truncate' build failure with recent gcc.
s/390
Thomas Richter:
- Fix s390 missing module symbol and warning for non-root users in 'perf record'.
arm64:
Vitaly Chikunov:
- Fix mksyscalltbl when system kernel headers are ahead of the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXO1vsQAKCRCyPKLppCJ+
J5MrAQCrxsTz1Lc6GrStrMMX72BqmoEPzoCkmONCukVJCcXeEQEAzdz4I4/CNG3g
phtc030+Njnc8X5qpkR9kqSQuaPjWAk=
=1Fbq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.2-20190528' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
BPF:
Jiri Olsa:
- Fixup determination of end of kernel map, to avoid having BPF programs,
that are after the kernel headers and just before module texts mixed up in
the kernel map.
tools UAPI header copies:
Arnaldo Carvalho de Melo:
- Update copy of files related to new fspick, fsmount, fsconfig, fsopen,
move_mount and open_tree syscalls.
- Sync cpufeatures.h, sched.h, fs.h, drm.h, i915_drm.h and kvm.h headers.
Namespaces:
Namhyung Kim:
- Add missing byte swap ops for namespace events when processing records from
perf.data files that could have been recorded in a arch with a different
endianness.
- Fix access to the thread namespaces list by using the namespaces_lock.
perf data:
Shawn Landden:
- Fix 'strncat may truncate' build failure with recent gcc.
s/390
Thomas Richter:
- Fix s390 missing module symbol and warning for non-root users in 'perf record'.
arm64:
Vitaly Chikunov:
- Fix mksyscalltbl when system kernel headers are ahead of the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case of errors, predicate_parse() goes to the out_free label
to free memory and to return an error code.
However, predicate_parse() does not free the predicates of the
temporary prog_stack array, thence leaking them.
Link: http://lkml.kernel.org/r/20190528154338.29976-1-tomasbortoli@gmail.com
Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Reported-by: syzbot+6b8e0fb820e570c59e19@syzkaller.appspotmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
[ Added protection around freeing prog_stack[i].pred ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is no need to print a backtrace when memory allocation fails, as
the memory allocation core already takes care of that.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190527115742.2693-1-geert+renesas@glider.be
This adds raw (unprocessed) BT.656 stream capturing support for the analog
part of Medion 95700.
It can be enabled by setting CXUSB_EXTENDEDMODE_CAPTURE_RAW flag in
parm.capture.extendedmode passed to VIDIOC_S_PARM.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch fix a bug in the mmu code that checks whether we can use huge
page mappings for host pages.
The code is supposed to enable huge page mappings only if ALL DMA
addresses are aligned to 2MB AND the number of pages in each DMA chunk is
a modulo of the number of pages in 2MB. However, the code ignored the
first requirement for the first DMA chunk.
This patch fix that issue by making sure the requirement of address
alignment is validated against all DMA chunks.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds support for analog part of Medion 95700 in the cxusb
driver.
What works:
* Video capture at various sizes with sequential fields,
* Input switching (TV Tuner, Composite, S-Video),
* TV and radio tuning,
* Video standard switching and auto detection,
* Radio mode switching (stereo / mono),
* Unplugging while capturing,
* DVB / analog coexistence.
What does not work yet:
* Audio,
* VBI,
* Picture controls.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: remove left-over commented-out debug message]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit c07a48c265 ("mmc: sdhci: Remove finish_tasklet"), the IRQ
thread might be used to complete requests, but the IRQ thread is also used
to process SDIO card interrupts. This can cause a deadlock when the SDIO
processing tries to access the card since that would also require the IRQ
thread. Change SDHCI to use sdio_signal_irq() to schedule a work item
instead. That also requires implementing the ->ack_sdio_irq() mmc host op.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: c07a48c265 ("mmc: sdhci: Remove finish_tasklet")
Reported-by: Brian Masney <masneyb@onstation.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch prepares cxusb driver for supporting the analog part of
Medion 95700 (previously only the digital - DVB - mode was supported).
Specifically, it adds support for:
* switching the device between analog and digital modes of operation,
* enforcing that only one mode is active at the same time due to hardware
limitations.
Actual implementation of the analog mode will be provided by the next
commit.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
bringup_wait_for_ap() comment references cpu_notify_starting(), but the
function is actually called notify_cpu_starting(). Fix that.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1905282128100.1962@cbobk.fhfr.pm
According to V4L2 API set_fmt subdev operation should not return an error
on out-of-range picture sizes, the values should be clamped instead to the
supported range.
The cx25840 datasheet says that the chip is capable of scaling down the
picture width and height, respectively, 16 and 8 times.
These values agree with what the old implementation enforced.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit adds pin to pad mapping and output format configuration support
in CX2584x-series chips to cx25840 driver.
This functionality is then used to allow disabling ivtv-specific hacks and
configuration values (called a "generic mode"), so cx25840 driver can be
used for other devices not needing them without risking compatibility
problems.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
For passthrough, after rebooted the VM, driver will do
a baco reset before doing other driver initialization during loading
driver. For doing the baco reset, it will first
check the baco reset capability. So first need to set the
cap from the vbios information or baco reset won't be
enabled.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not necessary on soc15 and breaks driver reload on server cards.
Acked-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Flora Cui <Flora.Cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a field in map_queues packet to indicate whether
this is a gws control queue. Only one queue per process
can be gws control queue. Change num_gws field in
map_process packet to 7 bits
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new kfd ioctl to allocate queue GWS. Queue
GWS is released on queue destroy.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functions in process queue manager to
set/unset queue gws. Also set process's number
of gws used. Currently only one queue in
process can use and use all gws.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GWS bo is shared between all kfd processes. Add function to add gws
to kfd process's bo list so gws can be evicted from and restored
for process.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On device initialization, KFD allocates all (64) gws which
is shared by all KFD processes.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_amdkfd interface to alloc and free gws
from amdgpu
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_amdkfd interface to get num_gws and add num_gws
to /sys/class/kfd/kfd/topology/nodes/x/properties. Only report
num_gws if MEC FW support GWS barriers. Currently it is
determined by a module parameter which will be replaced
with MEC FW version check when firmware is ready.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TTM doesn't support CPU mapping of sg type bo (under which
mmio bo is created). Switch mmaping of mmio page to kfd
device file.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_destroy should be called amdgpu_cgs_destroy_device,
as it will use cgs context to read or write registers.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit implements g_std operation in cx25840 driver by returning the
last set video standard.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
cx25840 driver g_std operation queries the currently detected video signal,
however this is what querystd operation should do, so let's rename the
handler.
None of the existing cx25840 driver users ever called the g_std operation,
one of them calls querystd on each of its subdevs but then the result is
only used to implement VIDIOC_QUERYSTD (as it should).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
cx25840_load_fw() does the same thing as cx25840_reset(), only keeps
"is_initialized" flag so any further invocation of this function besides
the first one is a NOP.
Let's just call cx25840_reset() directly from cx25840_load_fw() instead of
open coding it there.
While we are at it, let's also improve comments about cx25840_load_fw()
so they are current and in the proper style (one of them even referred to a
non-existing cx25840 init operation).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The keygen extracted fields are used as input for the hash that
determines the incoming frames distribution. Adding IPSEC SPI so
different IPSEC flows can be distributed to different CPUs.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
slice * subslice stride + subslice index / 8
v2: fix spacing in set_sseu_info args
use set_sseu_info to initialize sseu data when building
device status in debugfs
rename variables in intel_engine_types.h to avoid checkpatch
warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
return the correct subslice enable in for_each_instdone
add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size
use printk formatted string for subslice mask
v7: remove string.h header and rebase
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
Move functions to intel_sseu.h and remove inline qualifier.
Additionally, ensure these are all prefixed with intel_sseu_*
to match the convention of other functions in i915.
v2: fix spacing from checkpatch warning
v3: squash helper function changes into a single patch
break 80 character line to fix checkpatch warning
move get/set_eus helpers to intel_device_info.c
v4: Remove intel_ prefix from static functions in
intel_device_info.c and correctly copy changes
to stride calculation in those functions.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com
imx7_csi_enable() always return 0 and its return value is never checked,
so convert it to void.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make sure only the portals for the online CPUs are used.
Without this change, there are issues when someone boots with
maxcpus=n, with n < actual number of cores available as frames
either received or corresponding to the transmit confirmation
path would be offered for dequeue to the offline CPU portals,
getting lost.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new function to return the number of subslices per slice to
consolidate code usage.
v2: rebase on changes to move sseu struct to intel_sseu.h
v3: add intel_* prefix to sseu_subslices_per_slice
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-4-stuart.summers@intel.com
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Remove unneeded 'break' right after the 'return' statement as
pointed out by checkpatch.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make sure we don't use an out-of-bound index for the per-port RSS
context array.
As of today, the global context creation in mvpp22_rss_context_create
will prevent us from reaching this case, but we should still make sure
we are using a sane value anyway.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of devm_request_irq() failure, let's propagate the real error
code instead of a fake one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Subslice stride and EU stride are calculated multiple times in
i915_query. Move this calculation to a macro to reduce code duplication.
v2: update headers in intel_sseu.h
v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h
apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-3-stuart.summers@intel.com
In the case of platform_get_irq() failure, let's propagate the real error
code instead of a fake one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
While at it, propagate the real error value in case of
devm_platform_ioremap_resource() failure.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>