Commit graph

982,081 commits

Author SHA1 Message Date
Thomas Gleixner
e8fc982834 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 31
Based on 1 normalized pattern(s):

  this program is free warftware you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.095407238@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:10 +02:00
Thomas Gleixner
1b9391e349 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 30
Based on 1 normalized pattern(s):

  this module is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this module is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this module if not write to the free software foundation inc 59
  temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.003536767@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:10 +02:00
Thomas Gleixner
77f5075a43 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 29
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program see the file copying if not write to the free
  software foundation inc 59 temple place suite 330 boston ma 02111
  1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 5 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170856.913346514@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:10 +02:00
Thomas Gleixner
1568b83c4a treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 28
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the term of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170856.822819340@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:10 +02:00
Thomas Gleixner
5e0f8ad07b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 27
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the named license
  or any later version this program is distributed in the hope that it
  will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details you should have
  received a copy of the gnu general public license along with this
  program if not write to the free software foundation inc 59 temple
  place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 7 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170856.731149235@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:10 +02:00
Thomas Gleixner
465ae83692 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 26
Based on 1 normalized pattern(s):

  gnupg is free software you can redistribute it and or modify it
  under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version gnupg is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details you should have
  received a copy of the gnu general public license along with this
  program if not write to the free software foundation inc 59 temple
  place suite 330 boston ma 02111 1307 usa note this code is heavily
  based on the gnu mp library actually it s the same code with only
  minor changes in the way the data is stored this is to support the
  abstraction of an optional secure memory allocation which may be
  used to avoid revealing of sensitive data due to paging etc the gnu
  mp library itself is published under the lgpl however i decided to
  publish this code under the plain gpl

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 14 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170856.639982569@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:10 +02:00
Harry Wentland
c08e56c647 drm/amd/display: Don't load DMCU for Raven 1 (v2)
[WHY]
Some early Raven boards had a bad SBIOS that doesn't play nicely with
the DMCU FW. We thought the issues were fixed by ignoring errors on DMCU
load but that doesn't seem to be the case. We've still seen reports of
users unable to boot their systems at all.

[HOW]
Disable DMCU load on Raven 1. Only load it for Raven 2 and Picasso.

v2: Fix ifdef (Alex)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2019-05-24 10:16:36 -05:00
Jonathan Corbet
551bd3368a drm/i915: Maintain consistent documentation subsection ordering
With Sphinx 2.0 (or prior versions with the deprecation warnings fixed) the
docs build fails with:

  Documentation/gpu/i915.rst:403: WARNING: Title level inconsistent:

  Global GTT Fence Handling
  ~~~~~~~~~~~~~~~~~~~~~~~~~

  reST markup error:
  Documentation/gpu/i915.rst:403: (SEVERE/4) Title level inconsistent:

I "fixed" it by changing the subsections in i915.rst, but that didn't seem
like the correct change.  It turns out that a couple of i915 files create
their own subsections in kerneldoc comments using apostrophes as the
heading marker:

  Layout
  ''''''

That breaks the normal subsection marker ordering, and newer Sphinx is
rather more strict about enforcing that ordering.  So fix the offending
comments to make Sphinx happy.

(This is unfortunate, in that kerneldoc comments shouldn't need to be aware
of where they might be included in the heading hierarchy, but I don't see
a better way around it).

Cc: stable@vger.kernel.org  # v4.14+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-24 09:15:45 -06:00
Mauro Carvalho Chehab
77d09ad9dc scripts/sphinx-pre-install: make it handle Sphinx versions
As we want to switch to a newer Sphinx version in the future,
add some version detected logic, checking if the current
version meets the requirement and suggesting upgrade it the
version is supported but too old.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-24 09:09:32 -06:00
Jonathan Corbet
3bc8088464 docs: Fix conf.py for Sphinx 2.0
Our version check in Documentation/conf.py never envisioned a world where
Sphinx moved beyond 1.x.  Now that the unthinkable has happened, fix our
version check to handle higher version numbers correctly.

Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-24 09:09:32 -06:00
Grzegorz Halat
a1ad1cc970 vt/fbcon: deinitialize resources in visual_init() after failed memory allocation
After memory allocation failure vc_allocate() doesn't clean up data
which has been initialized in visual_init(). In case of fbcon this
leads to divide-by-0 in fbcon_init() on next open of the same tty.

memory allocation in vc_allocate() may fail here:
1097:     vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);

on next open() fbcon_init() skips vc_font.data initialization:
1088:     if (!p->fontdata) {

division by zero in fbcon_init() happens here:
1149:     new_cols /= vc->vc_font.width;

Additional check is needed in fbcon_deinit() to prevent
usage of uninitialized vc_screenbuf:

1251:        if (vc->vc_hi_font_mask && vc->vc_screenbuf)
1252:                set_vc_hi_font(vc, false);

Crash:

 #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4
    [exception RIP: fbcon_init+463]
    RIP: ffffffff814b860f  RSP: ffffc90001eafb18  RFLAGS: 00010246
...
 #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e
 #8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c
 #9 [ffffc90001eafbc8] con_install at ffffffff8154f624
...

Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:08:18 +02:00
Kefeng Wang
2cd0e54489 ipmi_ssif: fix unexpected driver unregister warning
If platform_driver_register() fails from init_ipmi_ssif(),
platform_driver_unregister() called unconditionally will
trigger following warning,

ipmi_ssif: Unable to register driver: -12
------------[ cut here ]------------
Unexpected driver unregister!
WARNING: CPU: 1 PID: 6305 at drivers/base/driver.c:193 driver_unregister+0x60/0x70 drivers/base/driver.c:193

Fix it by adding platform_registered variable, only unregister platform
driver when it is already successfully registered.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Message-Id: <20190524143724.43218-1-wangkefeng.wang@huawei.com>

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-05-24 10:04:27 -05:00
Linus Walleij
5fc537bfd0 drm/mcde: Add new driver for ST-Ericsson MCDE
This adds a new DRM driver for the ST-Ericsson Multi Channel
Display Engine, MCDE display controller.

This hardware has three independent DSI hosts and can composit
and display several memory buffers onto an LCD display. It
was developed for several years inside of ST-Ericsson and
shipped with a few million mobile phones from Sony and Samsung,
as well as with the Snowball community development board.

The driver is currently pretty rudimentary but supports a
simple framebuffer so we can get penguins and graphics when
using these SoCs.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524092019.19355-1-linus.walleij@linaro.org
2019-05-24 17:00:13 +02:00
Darrick J. Wong
d31d718528 xfs: fix broken log reservation debugging
xlog_print_tic_res() is supposed to print a human readable string for
each element of the log ticket reservation array.  Unfortunately, I
forgot to update the string array when we added rmap & reflink support,
so the debug message prints "region[3]: (null) - 352 bytes" which isn't
useful at all.  Add the missing elements and add a build check so that
we don't forget again to add a string when adding a new XLOG_REG_TYPE.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-05-24 07:32:01 -07:00
Manivannan Sadhasivam
64c47b624f reset: Add reset controller support for BM1880 SoC
Add reset controller support for Bitmain BM1880 SoC reusing the
reset-simple driver.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-24 16:08:14 +02:00
Manivannan Sadhasivam
ef98682a4e dt-bindings: reset: Add devicetree binding for BM1880 reset controller
Add devicetree binding for Bitmain BM1880 SoC reset controller.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-24 16:08:14 +02:00
Jean-Philippe Brucker
edbcf50eb8 arm64: insn: Add BUILD_BUG_ON() for invalid masks
Detect invalid instruction masks at build time. Some versions of GCC can
warn about the situation, but not all of them, it seems.

Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-24 14:58:30 +01:00
Jean-Philippe Brucker
c5e2edeb01 arm64: insn: Fix ldadd instruction encoding
GCC 8.1.0 reports that the ldadd instruction encoding, recently added to
insn.c, doesn't match the mask and couldn't possibly be identified:

 linux/arch/arm64/include/asm/insn.h: In function 'aarch64_insn_is_ldadd':
 linux/arch/arm64/include/asm/insn.h:280:257: warning: bitwise comparison always evaluates to false [-Wtautological-compare]

Bits [31:30] normally encode the size of the instruction (1 to 8 bytes)
and the current instruction value only encodes the 4- and 8-byte
variants. At the moment only the BPF JIT needs this instruction, and
doesn't require the 1- and 2-byte variants, but to be consistent with
our other ldr and str instruction encodings, clear the size field in the
insn value.

Fixes: 34b8ab091f ("bpf, arm64: use more scalable stadd over ldxr / stxr loop in xadd")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-24 14:58:29 +01:00
Will Deacon
96a13f57b9 arm64: Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now
Although we merged support for pseudo-nmi using interrupt priority
masking in 5.1, we've since uncovered a number of non-trivial issues
with the implementation. Although there are patches pending to address
these problems, we're facing issues that prevent us from merging them at
this current time:

  https://lkml.kernel.org/r/1556553607-46531-1-git-send-email-julien.thierry@arm.com

For now, simply mark this optional feature as BROKEN in the hope that we
can fix things properly in the near future.

Cc: <stable@vger.kernel.org> # 5.1
Cc: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-24 14:58:19 +01:00
Sean Paul
981f2aabea drm/msm/a6xx: Rename a6xx_gmu_probe to a6xx_gmu_init
This rename makes it more clear that everything initialized in the _init
function must be cleaned up in a6xx_gmu_remove. This will hopefully
dissuade people from using device managed resources (for reasons laid
out in the previous patch).

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-6-sean@poorly.run
2019-05-24 09:54:02 -04:00
Sean Paul
998efc7467 drm/msm/a6xx: Drop the device reference in gmu
of_find_device_by_node() grabs a dev reference, so make sure we clear it
on error and remove.

Changes in v2:
- Added to the set (Jordan)

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-5-sean@poorly.run
2019-05-24 09:53:50 -04:00
Sean Paul
a62fb211ad drm/msm/a6xx: Remove devm calls from gmu driver
The gmu driver is initialized and cleaned up with calls from the gpu driver. As
such, the platform device stays valid after a6xx_gmu_remove is called and the
device managed resources are not freed. In the case of gpu probe failures or
unbind, these resources will remain managed.

If the gpu bind is run again (eg: if there's a probe defer somewhere in msm),
these resources will be initialized again for the same device, creating multiple
references. In the case of irqs, this causes failures since the irqs are
not shared (nor should they be).

This patch removes all devm_* calls and manually cleans things up in
gmu_remove.

Changes in v2:
- Add iounmap and free_irq to gmu_probe error paths

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-4-sean@poorly.run
2019-05-24 09:53:36 -04:00
James Morse
623e1528d4 KVM: arm/arm64: Move cc/it checks under hyp's Makefile to avoid instrumentation
KVM has helpers to handle the condition codes of trapped aarch32
instructions. These are marked __hyp_text and used from HYP, but they
aren't built by the 'hyp' Makefile, which has all the runes to avoid ASAN
and KCOV instrumentation.

Move this code to a new hyp/aarch32.c to avoid a hyp-panic when starting
an aarch32 guest on a host built with the ASAN/KCOV debug options.

Fixes: 021234ef37 ("KVM: arm64: Make kvm_condition_valid32() accessible from EL2")
Fixes: 8cebe750c4 ("arm64: KVM: Make kvm_skip_instr32 available to HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-24 14:53:20 +01:00
Sean Paul
5ca4a094ba drm/msm/a6xx: Check for ERR or NULL before iounmap
pdcptr and seqptr aren't necessarily valid, check them before trying to
unmap them.

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-3-sean@poorly.run
2019-05-24 09:53:20 -04:00
James Morse
b7c50fab66 KVM: arm64: Move pmu hyp code under hyp's Makefile to avoid instrumentation
KVM's pmu.c contains the __hyp_text needed to switch the pmu registers
between host and guest. Because this isn't covered by the 'hyp' Makefile,
it can be built with kasan and friends when these are enabled in Kconfig.

When starting a guest, this results in:
| Kernel panic - not syncing: HYP panic:
| PS:a00003c9 PC:000083000028ada0 ESR:86000007
| FAR:000083000028ada0 HPFAR:0000000029df5300 PAR:0000000000000000
| VCPU:000000004e10b7d6
| CPU: 0 PID: 3088 Comm: qemu-system-aar Not tainted 5.2.0-rc1 #11026
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Plat
| Call trace:
|  dump_backtrace+0x0/0x200
|  show_stack+0x20/0x30
|  dump_stack+0xec/0x158
|  panic+0x1ec/0x420
|  panic+0x0/0x420
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x002,25006082
| Memory Limit: none
| ---[ end Kernel panic - not syncing: HYP panic:

This is caused by functions in pmu.c calling the instrumented
code, which isn't mapped to hyp. From objdump -r:
| RELOCATION RECORDS FOR [.hyp.text]:
| OFFSET           TYPE              VALUE
| 0000000000000010 R_AARCH64_CALL26  __sanitizer_cov_trace_pc
| 0000000000000018 R_AARCH64_CALL26  __asan_load4_noabort
| 0000000000000024 R_AARCH64_CALL26  __asan_load4_noabort

Move the affected code to a new file under 'hyp's Makefile.

Fixes: 3d91befbb3 ("arm64: KVM: Enable !VHE support for :G/:H perf event modifiers")
Cc: Andrew Murray <Andrew.Murray@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-24 14:53:20 +01:00
Christoffer Dall
493fcbc843 MAINTAINERS: KVM: arm/arm64: Remove myself as maintainer
I no longer have time to actively review patches and manage the tree and
it's time to make that official.

Huge thanks to the incredible Linux community and all the contributors
who have put up with me over the past years.

I also take this opportunity to remove the website link to the Columbia
web page, as that information is no longer up to date and I don't know
who manages that anymore.

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-24 14:53:20 +01:00
Sean Paul
cfcb365861 drm/msm/a6xx: Remove duplicate irq disable from remove
a6xx_gmu_stop() already calls this function via shutdown or force_stop,
so it's not necessary to call it twice. Previously this would have
knocked the irq refcount out of sync, but now with the irqs_enabled flag
it's just housekeeping.

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-2-sean@poorly.run
2019-05-24 09:53:03 -04:00
Sean Paul
606ec90fc2 drm/msm/a6xx: Avoid freeing gmu resources multiple times
The driver checks for gmu->mmio as a sign that the device has been
initialized, however there are failures in probe below the mmio init.
If one of those is hit, mmio will be non-null but freed.

In that case, a6xx_gmu_probe will return an error to a6xx_gpu_init which
will in turn call a6xx_gmu_remove which checks gmu->mmio and tries to free
resources for a second time. This causes a great boom.

Fix this by adding an initialized member to gmu which is set on
successful probe and cleared on removal.

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-1-sean@poorly.run
2019-05-24 09:52:40 -04:00
Philippe Mazenauer
cda03a9a7b clocksource/drivers/timer-ti-dm: Change to new style declaration
Variable 'dmtimer_ops' was declared const static instead of static const.

../drivers/clocksource/timer-ti-dm.c:899:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]
 const static struct omap_dm_timer_ops dmtimer_ops = {
 ^~~~~

Signed-off-by: Philippe Mazenauer <philippe.mazenauer@outlook.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-05-24 15:51:30 +02:00
Clément Péron
7c4a7049b5
arm64: defconfig: enable sunxi watchdog
The SUNXI_WATCHDOG option is required to make the
watchdog available on Allwinner H6.

Enable this option as a module.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-24 15:07:17 +02:00
Clément Péron
ae3ceed0a3
arm64: dts: allwinner: h6: add r_watchog node
Allwinner H6 has a r_watchdog similar to A64.

Declare it in the device-tree.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-24 15:07:03 +02:00
Clément Péron
b6cebb1c2d
arm64: dts: allwinner: h6: add watchdog node
Allwinner H6 has a watchog node which seems broken
on some boards.

Test has been performed on several boards.

Chen-Yu Tsai boards:
Pine H64 - H6448BA 7782 => OK
OrangePi Lite 2 - H8068BA 61C2 => KO

Martin Ayotte boards:
Pine H64 - H8069BA 6892 => OK
OrangePi 3 - HA047BA 69W2 => KO
OrangePi One Plus - H7310BA 6842 => KO
OrangePi Lite2 - H6448BA 6662 => KO

Clément Péron board:
Beelink GS1 - H7309BA 6842 => KO

As it seems not fixable for now, declare the node
but leave it disable with a comment.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-24 15:06:53 +02:00
Clément Péron
e0917169e5
dt-bindings: watchdog: add Allwinner H6 watchdog
Allwinner H6 has a similar watchdog as the A64 which is already
a compatible of the A31.

This commit add the H6 compatible.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-24 15:06:46 +02:00
Wen Yang
2c41cc0be0 media: venus: firmware: fix leaked of_node references
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/media/platform/qcom/venus/firmware.c:90:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.
drivers/media/platform/qcom/venus/firmware.c:94:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.
drivers/media/platform/qcom/venus/firmware.c:128:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-24 09:03:06 -04:00
Krzysztof Kozlowski
4a96f5e10e media: exynos4-is: Add missing of_node_put to fix reference leaks
Drop the reference to "parallel-ports" and remote endpoint's parent
nodes obtained previously with of_get_child_by_name() and
of_get_parent() respectively.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-24 09:02:08 -04:00
Bartlomiej Zolnierkiewicz
2f39cce963 media: remove redundant 'default n' from Kconfig-s
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-24 08:36:45 -04:00
Ranjani Sridharan
34ac3c3eb8
ASoC: core: lock client_mutex while removing link components
Removing link components results in topology unloading. So,
acquire the client_mutex before removing components in
soc_remove_link_components. This will prevent the lockdep warning
seen when dai links are removed during topology removal.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:10:46 +01:00
Jon Hunter
4819d06292
ASoC: simple-card: Restore original configuration of DAI format
Revert commit 069d037aea ("ASoC: simple-card: Fix configuration of
DAI format"). During further review, it turns out that the actual issue
was caused by an incorrectly formatted device-tree node describing the
soundcard.

The following is incorrect because the simple-audio-card
'bitclock-master' and 'frame-master' properties should not reference the
actual codec phandle ...

	sound {
		compatible = "simple-audio-card";
		...
	=>	simple-audio-card,bitclock-master = <&codec>;
	=>	simple-audio-card,frame-master = <&codec>;
		...

		simple-audio-card,cpu {
			sound-dai = <&xxx>;
		};

		simple-audio-card,codec {
	=>		sound-dai = <&codec>;
		};
	};

Rather, these properties should reference the phandle to the
'simple-audio-card,codec' property as shown below ...

	sound {
		compatible = "simple-audio-card";
		...
	=>	simple-audio-card,bitclock-master = <&codec>;
	=>	simple-audio-card,frame-master = <&codec>;
		...

		simple-audio-card,cpu {
			sound-dai = <&xxx>;
		};

	=>	codec: simple-audio-card,codec { /* simple-card wants here */
			sound-dai = <&xxx>;	 /* not here */
		};
	};

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:10:33 +01:00
Axel Lin
12c574d84c
regulator: slg51000: Remove unneeded regl_pdata from struct slg51000
Just use a local variable *ena_gpiod in slg51000_of_parse_cb instead.
With this change, the struct slg51000_pdata can be removed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:04:49 +01:00
Axel Lin
0a33d4feea
regulator: slg51000: Constify slg51000_regl_ops and slg51000_switch_ops
These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:04:23 +01:00
Gustavo A. R. Silva
e718a3eb09
ASoC: qdsp6: q6core: Use struct_size() in kmemdup()
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace code of the following form:

sizeof(*fwk) + fwk->num_services * sizeof(fwk->svc_api_info[0]);

with:

struct_size(fwk, svc_api_info, fwk->num_services)

and so on...

Notice that variables bytes and len are unnecessary, hence they are
removed.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:01:57 +01:00
Gustavo A. R. Silva
d00cc2f16a
ASoC: Intel: Skylake: Use struct_size() helper
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

uuid_params->num_modules * sizeof(struct skl_mod_inst_map) + sizeof(uuid_params->num_modules)

with:

struct_size(params, u.map, uuid_params->num_modules)

and so on...

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:01:38 +01:00
Gustavo A. R. Silva
07597910a9
ASoC: dapm: Use struct_size() in krealloc()
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with
memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

instance = krealloc(instance, sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, use the new
struct_size() helper:

instance = krealloc(instance, struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:01:18 +01:00
Pierre-Louis Bossart
b8bb535ae4
ASoC: Intel: boards: remove unnecessary inclusion of skl.h
We've used a standard interface for machine drivers for some time now,
there is no need for this dependency on a Skylake-specific header

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-24 13:00:58 +01:00
Manivannan Sadhasivam
49bd61ebce pinctrl: Add pinconf support for BM1880 SoC
Add pinconf support for Bitmain BM1880 SoC. Pinconf support includes
pin bias, slew rate and schmitt trigger. Drive strength support will
be added later.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-24 13:54:08 +02:00
Manivannan Sadhasivam
752a74038d dt-bindings: pinctrl: Document pinconf bindings for BM1880 SoC
Document pinconf bindings for Bitmain BM1880 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-24 13:53:05 +02:00
Manivannan Sadhasivam
8247b2474b pinctrl: Rework the pinmux handling for BM1880 SoC
Rework the BM1880 SoC pinmux handling by removing the
BM1880_PINMUX_FUNCTION_MUX define and merging it with the
BM1880_PINMUX_FUNCTION definition. Since the PWM muxing is handled by
generic pin controller in the SoC itself, there is no need to have a
dedicated code to do the muxing in PWM registers. So, lets club all
pinmux handling in the same per pin mux handling code.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-24 13:52:15 +02:00
Manivannan Sadhasivam
13531e5d35 dt-bindings: pinctrl: Modify pinctrl memory map
Earlier, the PWM registers were included as part of the pinctrl memory
map, but this turned to be useless as the muxing is being handled by the
SoC pin controller itself. So, lets modify the pinctrl memory map to
reflect the same.

Fixes: 07b734fbde ("dt-bindings: pinctrl: Add BM1880 pinctrl binding")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-24 13:50:47 +02:00
Jerome Brunet
b22a7f8544 pinctrl: meson: add output support in pinconf
Add pinconf support for PIN_CONFIG_OUTPUT_ENABLE and PIN_CONFIG_OUTPUT
in the meson pinctrl driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-24 13:49:32 +02:00
Jerome Brunet
1254db248f dt-bindings: pinctrl: meson: add output support in pinconf
add support for the pinconf DT property output-enable, output-disable,
output-low and output-high in the meson pinctrl driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-24 13:48:24 +02:00