Commit graph

982,081 commits

Author SHA1 Message Date
Amir Goldstein
acf3062a7e ovl: relax WARN_ON() for overlapping layers use case
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000

Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:

  mkdir foo work
  mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"

The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.

The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.

On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.

Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.

The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().

Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc95 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-05-08 13:25:53 +02:00
Andi Kleen
0e72499c3c x86/kprobes: Make trampoline_handler() global and visible
This function is referenced from assembler, so in LTO
it needs to be global and visible to not be optimized away.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20190330004743.29541-7-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-08 13:13:58 +02:00
Jia Zhang
81d30225bc x86/vdso: Remove hpet_page from vDSO
This trivial cleanup finalizes the removal of vDSO HPET support.

Fixes: 1ed95e52d9 ("x86/vdso: Remove direct HPET access through the vDSO")
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/20190401114045.7280-1-zhang.jia@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-08 13:13:57 +02:00
Bartosz Golaszewski
796fad0101 MAINTAINERS: Add an entry for MAX77650 PMIC driver
I plan on extending this set of drivers so add myself as maintainer.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:07:12 +01:00
Bartosz Golaszewski
1af2b76f63 input: max77650: Add onkey support
Add support for the push- and slide-button events for max77650.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:07:07 +01:00
Bartosz Golaszewski
5be102eb16 leds: max77650: Add LEDs support
This adds basic support for LEDs for the max77650 PMIC. The device has
three current sinks for driving LEDs.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:07:02 +01:00
Bartosz Golaszewski
72b5135bc3 gpio: max77650: Add GPIO support
Add GPIO support for max77650 mfd device. This PMIC exposes a single
GPIO line.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:06:58 +01:00
Bartosz Golaszewski
e85e17da8a power: supply: max77650: Add support for battery charger
Add basic support for the battery charger for max77650 PMIC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:06:52 +01:00
Bartosz Golaszewski
d0f6033450 mfd: Add new driver for MAX77650 PMIC
Add the core MFD driver for max77650 PMIC. We define five sub-devices
for which the drivers will be added in subsequent patches.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:06:21 +01:00
Bartosz Golaszewski
1946f9967c mfd: mfd-core: Document mfd_add_devices()
Add a kernel doc for mfd_add_devices().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:06:02 +01:00
Bartosz Golaszewski
93fb61e2c3 dt-bindings: input: Add DT bindings for max77650
Add the DT binding document for the onkey module of max77650.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:05:56 +01:00
Bartosz Golaszewski
5a032b0697 dt-bindings: leds: Add DT bindings for max77650
Add the DT binding document for the LEDs module of max77650.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:05:48 +01:00
Bartosz Golaszewski
424ece627c dt-bindings: power: supply: Add DT bindings for max77650
Add the DT binding document for the battery charger module of max77650.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:05:37 +01:00
Bartosz Golaszewski
13a22f7331 dt-bindings: mfd: Add DT bindings for max77650
Add a DT binding document for max77650 ultra-low power PMIC. This
describes the core mfd device and the GPIO module.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08 12:04:58 +01:00
Emil Renner Berthing
47300728fb
spi: rockchip: turn down tx dma bursts
This fixes tx and bi-directional dma transfers on rk3399-gru-kevin.

It seems the SPI fifo must have room for 2 bursts when the dma_tx_req
signal is generated or it might skip some words. This in turn makes
the rx dma channel never complete for bi-directional transfers.

Fix it by setting tx burst length to fifo_len / 4 and the dma
watermark to fifo_len / 2.

However the rk3399 TRM says (sic):
"DMAC support incrementing-address burst and fixed-address burst. But in
the case of access SPI and UART at byte or halfword size, DMAC only
support fixed-address burst and the address must be aligned to word."

So this relies on fifo_len being a multiple of 16 such that the
burst length (= fifo_len / 4) is a multiple of 4 and the addresses
will be word-aligned.

Fixes: dcfc861d24 ("spi: rockchip: adjust dma watermark and burstlen")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 19:32:28 +09:00
Josh Poimboeuf
95310e348a x86/speculation/mds: Fix documentation typo
Fix a minor typo in the MDS documentation: "eanbled" -> "enabled".

Reported-by: Jeff Bastian <jbastian@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-05-08 11:31:32 +02:00
Tyler Hicks
ea01668f9f Documentation: Correct the possible MDS sysfs values
Adjust the last two rows in the table that display possible values when
MDS mitigation is enabled. They both were slightly innacurate.

In addition, convert the table of possible values and their descriptions
to a list-table. The simple table format uses the top border of equals
signs to determine cell width which resulted in the first column being
far too wide in comparison to the second column that contained the
majority of the text.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-05-08 11:31:31 +02:00
speck for Pawan Gupta
e672f8bf71 x86/mds: Add MDSUM variant to the MDS documentation
Updated the documentation for a new CVE-2019-11091 Microarchitectural Data
Sampling Uncacheable Memory (MDSUM) which is a variant of
Microarchitectural Data Sampling (MDS). MDS is a family of side channel
attacks on internal buffers in Intel CPUs.

MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from
memory that takes a fault or assist can leave data in a microarchitectural
structure that may later be observed using one of the same methods used by
MSBDS, MFBDS or MLPDS. There are no new code changes expected for MDSUM.
The existing mitigation for MDS applies to MDSUM as well.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Jon Masters <jcm@redhat.com>
2019-05-08 11:31:31 +02:00
Martin Sperl
d5864e5bed
spi: core: allow defining time that cs is deasserted as a multiple of SCK
Support setting a delay between cs assert and deassert as
a multiple of spi clock length.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 18:30:01 +09:00
Martin Sperl
0ff2de8bb1
spi: core: allow defining time that cs is deasserted
For some SPI devices that support speed_hz > 1MHz the default 10 us delay
when cs_change = 1 is typically way to long and may result in poor spi bus
utilization.

This patch makes it possible to control the delay at micro or nano second
resolution on a per spi_transfer basis. It even allows an "as fast as
possible" mode with:
    xfer.cs_change_delay_unit = SPI_DELAY_UNIT_NSECS;
    xfer.cs_change_delay = 0;

The delay code is shared between delay_usecs and cs_change_delay for
consistency and reuse, so in the future this change_delay_unit could also
apply to delay_usec as well.

Note that on slower SOCs/CPU actually reaching ns deasserts on cs is not
realistic as the gpio overhead alone (without any delays added ) may
already leave cs deasserted for more than 1us - at least on a raspberry pi.
But at the very least this way we can keep it as short as possible.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 18:28:51 +09:00
Oded Gabbay
0c169b8afd habanalabs: check to load F/W before boot status
This patch changes the order of checks when initializing the device CPU.
We want first to check if we need to load the F/W, and only if we need to,
then we want to check the status of the CPU boot program.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-05-08 12:22:41 +03:00
Paul Gortmaker
261e90829f
ASoC: soc-acpi: fix implicit header use of module.h/export.h
This file is implicitly relying on an instance of including
module.h from <linux/acpi.h>.

Ideally, header files under include/linux shouldn't be adding
includes of other headers, in anticipation of their consumers,
but just the headers needed for the header itself to pass
parsing with CPP.

The module.h is particularly bad in this sense, as it itself does
include a whole bunch of other headers, due to the complexity of
module support.

Here, we make the include explicit, in order to allow the future
removal of module.h from linux/acpi.h without causing build breakage.

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 18:06:28 +09:00
Martin Sperl
154f7da56f
spi: bcm2835: add driver stats to debugfs
To estimate efficiency add statistics on transfer types
(polling, interrupt and dma) used to debugfs.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>

Changelog:
  V1 -> V2: applied feedback by Stefan Wahren
            reorganized patchset
	    added extra rational, descriptions
	    fixed compile issue when CONFIG_DEBUG_FS is unset
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:59:47 +09:00
Martin Sperl
ff245d90eb
spi: bcm2835: make the polling duration limits configurable
Under some circumstances the default 30 us polling limit is not optimal
and may lead to long delays because we are waiting on an interrupt.
with this patch we have the possibility to influence this policy.

So make this limit (in us) configurable via a module parameters
(but also modifyable via /sys/modules/...)

This replicates similar code found in spi-bcm2835aux.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>

Changelog:
  V1 -> V2: applied feedback by Stefan Wahren
            reorganized patchset
	    added extra rational, descriptions
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:59:21 +09:00
Martin Sperl
c41d62b06c
spi: bcm2835: added comment about different bus behaviour of DMA mode
The DMA mode behaves slightly different than polling or interrupt driven
mode, so just document the fact

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>

Changelog:
  V1 -> V2: applied feedback by Stefan Wahren
            new in V2
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:58:54 +09:00
Martin Sperl
7f1922eb3a
spi: bcm2835: Avoid 64-bit arithmetic in xfer len calc
Avoid 64 bit aritmetics when deciding if we need to use polling or not
This replicates: commit d704afffe6
("spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc")
from spi-bcm2835aux

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>

Changelog:
  V1 -> V2: applied feedback by Stefan Wahren
            reorganized patchset
	    added extra rational, descriptions
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:58:28 +09:00
Martin Sperl
9ac3f90db4
spi: bcm2835: bcm2835_spi_transfer_one_poll remove unnecessary argument
Remove the unnecessary argument of xfer_time_us when calling
bcm2835_spi_transfer_one_poll.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>

Changelog:
  V1 -> V2: applied feedback by Stefan Wahren
            reorganized patchset
	    added extra rational, descriptions
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:57:57 +09:00
Radu Pirea
c3fdefc2d7
spi: at91-usart: add DMA support
This patch adds support for DMA. Transfers are done with dma only if
they are longer than 16 bytes in order to achieve a better performance.
DMA setup introduces a little overhead and for transfers shorter than 16
bytes there is no performance improvement.

Signed-off-by: Radu Pirea <radu_nicolae.pirea@upb.ro>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:45:26 +09:00
Kailang Yang
6447c962bc ALSA: hda/realtek - Support low power consumption for ALC256
Remove hp_pin = 0 return. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc256_init() and alc256_shutup() must run delay when headset jack
was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.

[ NOTE: this is a quite quite similar change for ALC295 by commit
  d3ba58bb89 ("ALSA: hda/realtek - Support low power consumption for
  ALC295"), but applied to ALC256 codec instead -- tiwai ]

Fixes: 8983eb602a ("ALSA: hda/realtek - Move to ACT_INIT state")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-08 10:43:16 +02:00
Radu Pirea
f7b99e5948
dt-bindings: mfd: atmel-usart: add DMA bindings for USART in SPI mode
The bindings for DMA are now common for both drivers of the USART
IP.

The node given as an example for USART in SPI mode has been updated in
order to include DMA bindings.

Signed-off-by: Radu Pirea <radu_nicolae.pirea@upb.ro>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:40:22 +09:00
Linus Walleij
e29eaa3c4b
spi: ep93xx: Drop unused variable
My previous patch leaves a dangling variable in the driver.
get rid of it.

Fixes: 06a391b1621e ("spi: ep93xx: Convert to use CS GPIO descriptors")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:37:43 +09:00
Guenter Roeck
a9f0bda567 watchdog: Enforce that at least one pretimeout governor is enabled
Since commit "watchdog: Use depends instead of select for pretimeout
governors", it was possible to enable pretimeout governors but keep all
of them disabled. Doing this results in the following build failure.

../drivers/watchdog/watchdog_pretimeout.c:
	In function ‘watchdog_register_governor’:
../drivers/watchdog/watchdog_pretimeout.c:139:26: error:
	‘WATCHDOG_PRETIMEOUT_DEFAULT_GOV’ undeclared
   if (!strncmp(gov->name, WATCHDOG_PRETIMEOUT_DEFAULT_GOV,

Since it does not make sense to enable pretimeout support but disable
all pretimeout governors, enforce that at least one of them is always
enabled.

Fixes: f627ac0e12 ("watchdog: Use depends instead of select for pretimeout governors")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-08 10:33:59 +02:00
Axel Lin
3df4235ac4
regulator: max77650: Convert MAX77651 SBB1 to pickable linear range
The pickable linear range is suitable for The MAX77651 SBB1.
According to MAX77651 TV_SBB1 Code Table:
Use BIT[1:0] as range selectors.
Use BIT[5:2] as selectors for each linear range.

The MAX77651 SBB1 supports up to selector 57, selector 58 ~ 63 are RSVD,
thus set n_voltage to 58.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:32:55 +09:00
Axel Lin
68ce3a4461
regulator: core: Slightly improve readability of _regulator_get_enable_time
The logic is equivalent, but it looks more straightforward this way:
If rdev->desc->ops->enable_time is set, call it.
Otherwise fallback to return rdev->desc->enable_time.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:32:28 +09:00
Takashi Iwai
5095c418b9 ASoC: Fixes for v5.2
A bunch of driver specific fixes that came in since the initial pull
 request for v5.2, mainly warning fixes for the newly added Sound Open
 Firmware code which people appeared to only start looking at after I'd
 sent the pull request.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlzSh/cTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MjtB/4xrpGk9Vk2IWJbRMZwpbHlt9R/iehc
 gf8BmTeEhkhACuBTCej0i7tj4a6KqTDFdwTahTvTnIZTt6u1pdRcQyo8tPpoT+NX
 Mky5IuYcLuxJlKnHVuxuMUi9jYSRyrNUN4lm04bEDMk7Qu455+7LWA63H+1TYEPV
 qB8AguxTIupbok51y4Q8rNZFFaatdVMKIPjZCZsthwN5uJEu/BkBt66uyqnrIGKZ
 1LYqLt791tYEfc2Soue0GW4al3VAJ2ABQhdHmmDRCw042RHtQiu+qsptlARWQMGg
 lhGj10Qdw5GYQdDStZGxvSTU6/uXeKSHkVYG+eXV1NpneWXrLlMDVzTc
 =+uWY
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.2

A bunch of driver specific fixes that came in since the initial pull
request for v5.2, mainly warning fixes for the newly added Sound Open
Firmware code which people appeared to only start looking at after I'd
sent the pull request.
2019-05-08 10:29:31 +02:00
Shengjiu Wang
c0ffbd64b9
ASoC: fsl_sai: Move clock operation to PM runtime
Turn off/on clocks when device enters suspend/resume. This
can help saving power.

As a further optimization, we turn off/on mclk only when SAI
is in master mode because otherwise mclk is externally provided.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:17:26 +09:00
Olivier Moysan
71ed4bddde
ASoC: stm32: i2s: manage identification registers
Add support of identification registers in STM32 I2S.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:17:01 +09:00
Jerome Brunet
0cf4610b9f
ASoC: hdmi-codec: remove ops dependency on the dai id
The dependency on the dai_id can be removed by setting different ops
for the i2s and spdif dai and storing the dai format information in
each dai structure. It simplies the code a bit.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:16:28 +09:00
Jerome Brunet
1de005d47d
ASoC: hdmi-codec: remove reference to the dai drivers in the private data
Keeping the a pointer to the dai drivers is not necessary. It is not used
by the hdmi_codec after the probe.

Even if it was used, the 'struct snd_soc_dai_driver' can accessed through
the 'struct snd_soc_dai' so keeping the pointer in the private data
structure is not useful.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:16:05 +09:00
Jerome Brunet
3fcf94ef4d
ASoC: hdmi-codec: remove reference to the current substream
If the hdmi-codec is on a codec-to-codec link, the substream pointer
it receives is completely made up by snd_soc_dai_link_event().
The pointer will be different between startup() and shutdown().

The hdmi-codec complains when this happens even if it is not really a
problem. The current_substream pointer is not used for anything useful
apart from getting the exclusive ownership of the device.

Remove current_substream pointer and replace the exclusive locking
mechanism with a simple variable and some atomic operations.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:15:38 +09:00
Jerome Brunet
900e5daf70
ASoC: hdmi-codec: remove function name debug traces
Remove the debug traces only showing the function name on entry.
The same can be obtained using ftrace.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:15:15 +09:00
Olivier Moysan
4fc19fffaa
ASoC: stm32: i2s: update pcm hardware constraints
- Set period minimum size. Ensure at least 5ms period
up to 48kHz/16 bits to prevent underrun/overrun.
- Remove MDMA constraints on period maximum size and
set period maximum to half the buffer maximum size.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:13:38 +09:00
Libin Yang
939507f277
ASoC: codec: hdac_hdmi: no checking monitor in hw_params
Some userspace apps, like pulseaudio, may call open, hw_params,
prepare to judge whether the pcm is ready or not. Current hdac_hdmi
will return -ENODEV if monitor is not connected, which will cause
the apps believe the pcm is not ready. Actually PCM for hdmi is ready,
even the monitor is not connected.

This patch removes the check of monitor presence in hw_params, just like
what the legacy HD-Audio driver does.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:13:14 +09:00
Tzung-Bi Shih
ec0574a6ce
ASoC: mediatek: mt6358: save PGA for mixer control
mt6358_amic_disable() resets PGA to 0.

Save the gain settings from mixer control and restore them when using
the microphone.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:12:48 +09:00
Tzung-Bi Shih
bbb56537a3
ASoC: mediatek: mt6358: save output volume for mixer controls
Output volume settings from mixer controls would be lost.

Imagine that "Headphone Volume" has set to -10dB via amixer:
- in mtk_hp_enable()
  - hp_store_gain() saves the volume setting -10dB from regmap_read()
    to ana_gain[AUDIO_ANALOG_VOLUME_HPOUTL]
  - headset_volume_ramp() ramps up from -10dB to -10dB
- in mtk_hp_disable()
  - headset_volume_ramp() ramps down from -10dB to -40dB

Next time in mtk_hp_enable(), hp_store_gain() would save -40dB but
not -10dB.  As a result, headset_volume_ramp() would ramp from -10dB to
-40dB (which is mute).

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:12:24 +09:00
Tzung-Bi Shih
bdb8fa6b09
ASoC: mediatek: mt6358: initialize setting when ramping volume
Mt6358 ramps up from the smallest volume (i.e. -10dB) to target dB when
opening and ramps down from target dB to mute (i.e. -40dB) when closing.
If target is equal to -10dB when opening, headset_volume_ramp() simply
leaves current setting (which may not be -10dB) unchanged.

Execute the loop at least once to initialize the setting to the
starting point (i.e. from).

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 17:11:53 +09:00
Oded Gabbay
8c173dc41d habanalabs: remove dead code in habanalabs_drv.c
This patch removes some dead code that performs checks about variables
with hard-coded values.

The patch also moves the initialization of those variables to a separate
function, that will possibly have different values per ASIC.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-05-08 09:55:23 +03:00
YueHaibing
35399f87e2 configfs: fix possible use-after-free in configfs_register_group
In configfs_register_group(), if create_default_group() failed, we
forget to unlink the group. It will left a invalid item in the parent list,
which may trigger the use-after-free issue seen below:

BUG: KASAN: use-after-free in __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
Read of size 8 at addr ffff8881ef61ae20 by task syz-executor.0/5996

CPU: 1 PID: 5996 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
 __list_add include/linux/list.h:60 [inline]
 list_add_tail include/linux/list.h:93 [inline]
 link_obj+0xb0/0x190 fs/configfs/dir.c:759
 link_group+0x1c/0x130 fs/configfs/dir.c:784
 configfs_register_group+0x56/0x1e0 fs/configfs/dir.c:1751
 configfs_register_default_group+0x72/0xc0 fs/configfs/dir.c:1834
 ? 0xffffffffc1be0000
 iio_sw_trigger_init+0x23/0x1000 [industrialio_sw_trigger]
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f494ecbcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f494ecbcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f494ecbd6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

Allocated by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 configfs_register_default_group+0x4c/0xc0 fs/configfs/dir.c:1829
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459
 slab_free_hook mm/slub.c:1429 [inline]
 slab_free_freelist_hook mm/slub.c:1456 [inline]
 slab_free mm/slub.c:3003 [inline]
 kfree+0xe1/0x270 mm/slub.c:3955
 configfs_register_default_group+0x9a/0xc0 fs/configfs/dir.c:1836
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881ef61ae00
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 32 bytes inside of
 192-byte region [ffff8881ef61ae00, ffff8881ef61aec0)
The buggy address belongs to the page:
page:ffffea0007bd8680 count:1 mapcount:0 mapping:ffff8881f6c03000 index:0xffff8881ef61a700
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0007ca4740 0000000500000005 ffff8881f6c03000
raw: ffff8881ef61a700 000000008010000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881ef61ad00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881ef61ad80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>ffff8881ef61ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
 ffff8881ef61ae80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8881ef61af00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 5cf6a51e60 ("configfs: allow dynamic group creation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-08 08:55:19 +02:00
Curtis Malainey
893d1a9c5c
ASoC: rt5677: Add component driver name
Add name to component driver so it is possible to lookup the component
when needed.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 15:43:52 +09:00
Pierre-Louis Bossart
ce38a75089
ASoC: SOF: core: fix undefined nocodec reference
The existing code mistakenly uses IS_ENABLED in C code instead of as
in conditional compilation, leading to the following error:

ld: sound/soc/sof/core.o: in function `sof_machine_check':
sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup'

Fix by using #if !IS_ENABLED()

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08 15:42:00 +09:00