Commit graph

982,081 commits

Author SHA1 Message Date
BOUGH CHEN
d3db80ca57 dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
Add imx7ulp compatible string.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Jerome Brunet
f50b7ac5e4 mmc: meson-gx: add signal resampling tuning
Use signal resampling tuning for the UHS and HS200 modes.
Instead of trying to get the *best* resampling setting with complex
window calculation, we just stop on the first working setting.

If the tuning setting later proves unstable, we will just continue the
tuning where we left it.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Jerome Brunet
5e6f75f423 mmc: meson-gx: remove Rx phase tuning
This remove all the code related to phase settings. Using the Rx phase
for tuning has not been reliable. We had several issues over the past
months, on both v2 and v3 mmc chips After discussing the issue matter
with Amlogic, They suggested to set a phase shift of 180 between Core and
Tx and use signal resampling for the tuning.

Since we won't be playing with the phase anymore, let's remove all the
clock code related to it and set the appropriate value on init.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Jerome Brunet
dc38ac8141 mmc: meson-gx: avoid clock glitch when switching to DDR modes
Activating DDR in the Amlogic mmc controller, among other things, will
divide the output clock by 2. So by activating it with clock on, we are
creating a glitch on the output.

Instead, let's deal with DDR when the clock output is off, when setting
the clock.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Jerome Brunet
d5f758f2df mmc: meson-gx: disable HS400
At the moment, all our attempts to enable HS400 on Amlogic chipsets have
been unsuccessful or unreliable. Until we can figure out how to enable this
mode safely and reliably, let's force it off.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Jerome Brunet
eb4d811277 mmc: meson-gx: correct irq flag
There is no reason for another device to request the MMC irq. It should
only be used the MMC device, so remove IRQ_SHARED and replace by
IRQ_ONESHOT as we don't the irq to fire again until the irq thread is
done

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Jerome Brunet
9c5fdb07a2 mmc: meson-gx: ack only raised irq
This is merely a clean up. It makes sense to only ack raised irqs
instead of acking everything all the time.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Jerome Brunet
98849da63f mmc: meson-gx: remove open coded read with timeout
There is already a function available to poll a register until a
condition is met. Let's use it instead of open coding it.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Kefeng Wang
7fc13b879f mmc: omap_hsmmc: Use dev_get_drvdata()
Using dev_get_drvdata directly.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Daniel Drake
c671b6dede mmc: alcor: work with multiple-entry sglists
DMA on this hardware is limited to dealing with a 4096 bytes at a
time. Previously, the driver was set up accordingly to request single-page
DMA buffers, however that had the effect of generating a large number
of small MMC requests for data I/O.

Improve the driver to accept multi-entry scatter-gather lists. The size of
each entry is already capped to 4096 bytes (AU6601_MAX_DMA_BLOCK_SIZE),
matching the hardware requirements. Existing driver code already iterates
through remaining sglist entries after each DMA transfer is complete.

Also add some comments to help clarify the situation, and clear up
some of the confusion I had regarding DMA vs PIO.

Testing with dd, this increases write performance from 2mb/sec to
10mb/sec, and increases read performance from 4mb/sec to 14mb/sec.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: http://lkml.kernel.org/r/CAD8Lp47JYdZzbV9F+asNwvSfLF_po_J7ir6R_Vb-Dab21_=Krw@mail.gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Daniel Drake
f19337d55f Revert "mmc: alcor: enable DMA transfer of large buffers"
This reverts commit 57ebb96c293da9f0ec56aba13c5541269a5c10b1.

Usage of the DMA page iterator was problematic here because
we were not considering offset & length of entries in the scatterlist.

Also, after further discussion, the suggested revised approach is much
more similar to the driver implementation before this commit was
applied, so revert it.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
YueHaibing
e69ec21eff memstick: tifm: remove set but not used variable 'data'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/memstick/host/tifm_ms.c: In function 'tifm_ms_issue_cmd':
drivers/memstick/host/tifm_ms.c:259:17: warning:
 variable 'data' set but not used [-Wunused-but-set-variable]

It's not used any more since commit 92b22d935f ("tifm: fix the
MemoryStick host fifo handling code")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Pan Bian
8e1943af29 mmc: core: fix possible use after free of host
In the function mmc_alloc_host, the function put_device is called to
release allocated resources when mmc_gpio_alloc fails. Finally, the
function pointed by host->class_dev.class->dev_release (i.e.,
mmc_host_classdev_release) is used to release resources including the
host structure. However, after put_device, host is used and released
again. Resulting in a use-after-free bug.

Fixes: 1ed2171944 ("mmc: core: fix error path in mmc_host_alloc")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Linus Lüssing
a3c7cd0cdf batman-adv: mcast: fix multicast tt/tvlv worker locking
Syzbot has reported some issues with the locking assumptions made for
the multicast tt/tvlv worker: It was able to trigger the WARN_ON() in
batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add().
While hard/not reproduceable for us so far it seems that the
delayed_work_pending() we use might not be quite safe from reordering.

Therefore this patch adds an explicit, new spinlock to protect the
update of the mla_list and flags in bat_priv and then removes the
WARN_ON(delayed_work_pending()).

Reported-by: syzbot+83f2d54ec6b7e417e13f@syzkaller.appspotmail.com
Reported-by: syzbot+050927a651272b145a5d@syzkaller.appspotmail.com
Reported-by: syzbot+979ffc89b87309b1b94b@syzkaller.appspotmail.com
Reported-by: syzbot+f9f3f388440283da2965@syzkaller.appspotmail.com
Fixes: cbebd363b2 ("batman-adv: Use own timer for multicast TT and TVLV updates")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-06 11:40:46 +02:00
Simon Wunderlich
bdc76fd299 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-06 11:40:46 +02:00
Björn Töpel
d24ed99b3b libbpf: remove unnecessary cast-to-void
The patches with fixes tags added a cast-to-void in the places when
the return value of a function was ignored.

This is not common practice in the kernel, and is therefore removed in
this patch.

Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 5750902a6e ("libbpf: proper XSKMAP cleanup")
Fixes: 0e6741f092 ("libbpf: fix invalid munmap call")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-06 11:35:17 +02:00
Geert Uytterhoeven
fdd20ec878 Documentation/features/time: Mark m68k having modern-timekeeping
M68k no longer uses arch_gettimeoffset.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-05-06 10:58:37 +02:00
Rafael J. Wysocki
e07095c9bb Merge branches 'pm-devfreq' and 'pm-domains'
* pm-devfreq:
  PM / devfreq: add tracing for scheduling work
  trace: events: add devfreq trace event file
  PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.
  PM / devfreq: rockchip-dfi: Move GRF definitions to a common place.
  PM / devfreq: exynos-bus: Suspend all devices on system shutdown
  PM / devfreq: Fix static checker warning in try_then_request_governor
  PM / devfreq: Restart previous governor if new governor fails to start
  PM / devfreq: tegra: remove unneeded variable
  PM / devfreq: rockchip-dfi: remove unneeded semicolon
  PM / devfreq: rk3399_dmc: remove unneeded semicolon
  PM / devfreq: consistent indentation
  PM / devfreq: fix missing check of return value in devfreq_add_device()
  PM / devfreq: fix mem leak in devfreq_add_device()
  PM / devfreq: Use of_node_name_eq for node name comparisons

* pm-domains:
  PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
  PM / Domains: Search for the CPU device outside the genpd lock
  PM / Domains: Drop unused in-parameter to some genpd functions
  PM / Domains: Use the base device for driver_deferred_probe_check_state()
  PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
  PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
  PM / Domains: Don't kfree() the virtual device in the error path
  PM / Domains: remove unnecessary unlikely()
2019-05-06 10:55:49 +02:00
Rafael J. Wysocki
7afc53951a Merge branches 'pm-docs' and 'pm-misc'
* pm-docs:
  Documentation: PM: Unify copyright notices
  Documentation: PM: Add SPDX license tags to multiple files
  cpufreq: intel_pstate: Documentation: Add references sections

* pm-misc:
  firmware/psci: add support for SYSTEM_RESET2
  drivers: firmware: psci: Announce support for OS initiated suspend mode
  drivers: firmware: psci: Simplify error path of psci_dt_init()
  drivers: firmware: psci: Split psci_dt_cpu_init_idle()
  MAINTAINERS: Update files for PSCI
  drivers: firmware: psci: Move psci to separate directory
2019-05-06 10:55:19 +02:00
Rafael J. Wysocki
78baa1ea58 Merge branches 'pm-cpuidle' and 'pm-sleep'
* pm-cpuidle:
  PM / Domains: Add genpd governor for CPUs
  cpuidle: Export the next timer expiration for CPUs
  PM / Domains: Add support for CPU devices to genpd
  PM / Domains: Add generic data pointer to struct genpd_power_state
  cpuidle: exynos: Unify target residency for AFTR and coupled AFTR states

* pm-sleep:
  PM / core: Propagate dev->power.wakeup_path when no callbacks
  PM / core: Introduce dpm_async_fn() helper
  PM / core: fix kerneldoc comment for device_pm_wait_for_dev()
  PM / core: fix kerneldoc comment for dpm_watchdog_handler()
  PM / sleep: Measure the time of filesystems syncing
  PM / sleep: Refactor filesystems sync to reduce duplication
  PM / wakeup: Use pm_pr_dbg() instead of pr_debug()
2019-05-06 10:54:43 +02:00
Rafael J. Wysocki
7d4a27c1c8 Merge branch 'pm-cpufreq'
* pm-cpufreq: (24 commits)
  cpufreq: Fix kobject memleak
  cpufreq: armada-37xx: fix frequency calculation for opp
  cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
  cpufreq: qoriq: add support for lx2160a
  cpufreq: qoriq: Add ls1028a chip support
  cpufreq: Move ->get callback check outside of __cpufreq_get()
  cpufreq: Remove needless bios_limit check in show_bios_limit()
  drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
  cpufreq: boost: Remove CONFIG_CPU_FREQ_BOOST_SW Kconfig option
  cpufreq: stats: Use lock by stat to replace global spin lock
  cpufreq: Remove cpufreq_driver check in cpufreq_boost_supported()
  cpufreq: maple: Remove redundant code from maple_cpufreq_init()
  cpufreq: ppc_cbe: fix possible object reference leak
  cpufreq: pmac32: fix possible object reference leak
  cpufreq/pasemi: fix possible object reference leak
  cpufreq: maple: fix possible object reference leak
  cpufreq: kirkwood: fix possible object reference leak
  cpufreq: imx6q: fix possible object reference leak
  cpufreq: ap806: fix possible object reference leak
  drivers/cpufreq: Convert some slow-path static_cpu_has() callers to boot_cpu_has()
  ...
2019-05-06 10:54:27 +02:00
Rafael J. Wysocki
4566e2dd4a Merge branch 'pm-x86'
* pm-x86:
  x86: tsc: Rework time_cpufreq_notifier()
  admin-guide: pm: intel_epb: Add SPDX license tag and copyright notice
  PM / arch: x86: MSR_IA32_ENERGY_PERF_BIAS sysfs interface
  PM / arch: x86: Rework the MSR_IA32_ENERGY_PERF_BIAS handling
2019-05-06 10:54:07 +02:00
Chia-I Wu
4d8979b3a6 drm/virtio: allocate fences with GFP_KERNEL
It was changed to GFP_ATOMIC in commit ec2f0577c (add & use
virtio_gpu_queue_fenced_ctrl_buffer) because the allocation happened
with a spinlock held.  That was no longer true after commit
9fdd90c0f (add virtio_gpu_alloc_fence()).

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190429221021.159784-1-olvaffe@gmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-06 10:52:58 +02:00
Chia-I Wu
5daf8857c9 drm/virtio: add trace events for commands
Trace when commands are queued for both ctrlq and cursorq.  Trace
when responses are received for ctrlq.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190429220825.156644-3-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-06 10:52:58 +02:00
Chia-I Wu
48ad7751db drm/virtio: trace drm_fence_emit
For most drivers, drm_fence_init is followed by drm_fence_emit
immediately.  But for our driver, they are done separately.  We also
don't know the fence seqno until drm_fence_emit.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190429220825.156644-2-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-06 10:52:58 +02:00
Chia-I Wu
efe2bf9655 drm/virtio: set seqno for dma-fence
This is motivated by having meaningful ftrace events, but it also
fixes use cases where dma_fence_is_later is called, such as in
sync_file_merge.

In other drivers, fence creation and cmdbuf submission normally
happen atomically,

  mutex_lock();
  fence = dma_fence_create(..., ++timeline->seqno);
  submit_cmdbuf();
  mutex_unlock();

and have no such issue.  But in our driver, because most ioctls
queue commands into ctrlq, we do not want to grab a lock.  Instead,
we set seqno to 0 when a fence is created, and update it when the
command is finally queued and the seqno is known.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190429220825.156644-1-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-06 10:52:58 +02:00
Rafael J. Wysocki
10b4768b27 Merge branch 'acpi-doc'
* acpi-doc: (25 commits)
  Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST
  Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST
  Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST
  Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST
  ...
2019-05-06 10:50:21 +02:00
Rafael J. Wysocki
7e8e05fd08 Merge branches 'acpi-utils', 'acpi-video', 'acpi-soc' and 'acpi-button'
* acpi-utils:
  gpio: merrifield: Fix build err without CONFIG_ACPI
  ACPI / utils: Remove deprecated function since no user left
  ASoC: Intel: cht_bsw_rt5672: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: cht_bsw_rt5645: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5651: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5640: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_es8316: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_da7213: Convert to use acpi_dev_get_first_match_dev()
  gpio: merrifield: Convert to use acpi_dev_get_first_match_dev()
  extcon: axp288: Convert to use acpi_dev_get_first_match_dev()
  ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper

* acpi-video:
  ACPI: video: Use vendor backlight on Sony VPCEH3U1E

* acpi-soc:
  ACPI / LPSS: Use acpi_lpss_* instead of acpi_subsys_* functions for hibernate

* acpi-button:
  ACPI: button: reinitialize button state upon resume
2019-05-06 10:50:08 +02:00
Rafael J. Wysocki
91751459ec Merge branches 'acpi-scan', 'acpi-tables', 'acpi-misc' and 'acpi-pm'
* acpi-scan:
  ACPI / scan: Add labels for PNP button devices
  ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package()

* acpi-tables:
  ACPI / tables: Clean up whitespace

* acpi-misc:
  ACPI / DPTF: Use dev_get_drvdata()
  ACPI: event: replace strcpy() by strscpy()
  ACPI: Fix comment typos

* acpi-pm:
  ACPI: PM: Print debug messages when enabling GPEs for wakeup
2019-05-06 10:49:39 +02:00
Rafael J. Wysocki
317e2cac45 Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20190405
  ACPICA: Namespace: add check to avoid null pointer dereference
  ACPICA: Update version to 20190329
  ACPICA: utilities: fix spelling of PCC to platform_comm_channel
  ACPICA: Rename nameseg length macro/define for clarity
  ACPICA: Rename nameseg compare macro for clarity
  ACPICA: Rename nameseg copy macro for clarity
2019-05-06 10:49:01 +02:00
Petr Mladek
0f46c78391 Merge branch 'for-5.2-pf-removal' into for-linus 2019-05-06 10:33:10 +02:00
Petr Mladek
35e1547511 Merge branch 'for-5.2-vsprintf-hardening' into for-linus 2019-05-06 10:32:45 +02:00
Andrii Nakryiko
581b31c36c kbuild: tolerate missing pahole when generating BTF
When BTF generation is enabled through CONFIG_DEBUG_INFO_BTF,
scripts/link-vmlinux.sh detects if pahole version is too old and
gracefully continues build process, skipping BTF generation build step.
But if pahole is not available, build will still fail. This patch adds
check for whether pahole exists at all and bails out gracefully, if not.

Cc: Alexei Starovoitov <ast@fb.com>
Reported-by: Yonghong Song <yhs@fb.com>
Fixes: e83b9f5544 ("kbuild: add ability to generate BTF type info for vmlinux")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-06 10:18:47 +02:00
Mika Westerberg
e43f53c22a
spi-nor: intel-spi: Add support for Intel Comet Lake SPI serial flash
Intel Comet Lake has the same SPI serial flash controller as Ice Lake.
Add Comet Lake PCI ID to the driver list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-05-06 11:18:02 +03:00
Sebastian Andrzej Siewior
d9c9ce34ed x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails
In the compacted form, XSAVES may save only the XMM+SSE state but skip
FP (x87 state).

This is denoted by header->xfeatures = 6. The fastpath
(copy_fpregs_to_sigframe()) does that but _also_ initialises the FP
state (cwd to 0x37f, mxcsr as we do, remaining fields to 0).

The slowpath (copy_xstate_to_user()) leaves most of the FP
state untouched. Only mxcsr and mxcsr_flags are set due to
xfeatures_mxcsr_quirk(). Now that XFEATURE_MASK_FP is set
unconditionally, see

  04944b793e ("x86: xsave: set FP, SSE bits in the xsave header in the user sigcontext"),

on return from the signal, random garbage is loaded as the FP state.

Instead of utilizing copy_xstate_to_user(), fault-in the user memory
and retry the fast path. Ideally, the fast path succeeds on the second
attempt but may be retried again if the memory is swapped out due
to memory pressure. If the user memory can not be faulted-in then
get_user_pages() returns an error so we don't loop forever.

Fault in memory via get_user_pages_unlocked() so
copy_fpregs_to_sigframe() succeeds without a fault.

Fixes: 69277c98f5 ("x86/fpu: Always store the registers in copy_fpstate_to_sigframe()")
Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: "linux-mm@kvack.org" <linux-mm@kvack.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190502171139.mqtegctsg35cir2e@linutronix.de
2019-05-06 09:49:40 +02:00
Fabien Dessenne
1f358bc6f2 drm/stm: ltdc: return appropriate error code during probe
During probe, return the "clk_get" error value instead of -ENODEV.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556114601-30936-3-git-send-email-fabien.dessenne@st.com
2019-05-06 09:22:15 +02:00
Fabien Dessenne
9e759fc7dc drm/stm: ltdc: manage the get_irq probe defer case
Manage the -EPROBE_DEFER error case for the ltdc IRQ.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1556114601-30936-2-git-send-email-fabien.dessenne@st.com
2019-05-06 09:21:16 +02:00
Dan Carpenter
476c7e1d34 i3c: Fix a shift wrap bug in i3c_bus_set_addr_slot_status()
The problem here is that addr can be I3C_BROADCAST_ADDR (126).  That
means we're shifting by (126 * 2) % 64 which is 60.  The
I3C_ADDR_SLOT_STATUS_MASK is an enum which is an unsigned int in GCC
so shifts greater than 31 are undefined.

Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-05-06 08:15:02 +02:00
David S. Miller
54516da1ea Merge branch 'r8169-replace-some-magic-with-more-speaking-functions'
Heiner Kallweit says:

====================
r8169: replace some magic with more speaking functions

Based on info from Realtek replace some magic with speaking functions
even though the exact meaning of certain values isn't known.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:58:36 -07:00
Heiner Kallweit
0ebacd12a1 r8169: add rtl8168g_set_pause_thresholds
Based on info from Realtek add a function for defining the thresholds
controlling ethernet flow control.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:58:36 -07:00
Heiner Kallweit
6b1bd242ca r8169: add rtl_set_fifo_size
Based on info from Realtek replace FIFO size config magic with
a function.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:58:36 -07:00
David S. Miller
3a97236472 Merge branch 'mlxsw-spectrum-Implement-loopback-ethtool-feature'
Ido Schimmel says:

====================
mlxsw: spectrum: Implement loopback ethtool feature

This patchset from Jiri allows users to enable loopback feature for
individual ports using ethtool. The loopback feature is useful for
testing purposes and will also be used by upcoming patchsets to enable
the monitoring of buffer drops.

Patch #1 adds the relevant device register.

Patch #2 Implements support in the driver.

Patch #3 adds a selftest.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:56:57 -07:00
Jiri Pirko
ad11340994 selftests: Add loopback test
Add selftest for loopback feature

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:56:57 -07:00
Jiri Pirko
8e44c0ce59 mlxsw: spectrum: Implement loopback ethtool feature
Allow user to enable loopback feature for individual ports using ethtool.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:56:57 -07:00
Jiri Pirko
a0c25387eb mlxsw: reg: Add Port Physical Loopback Register
The PPLR register allows configuration of the port's loopback mode.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:56:57 -07:00
Cong Wang
b362487a3b sch_htb: redefine htb qdisc overlimits
In commit 3c75f6ee13 ("net_sched: sch_htb: add per class overlimits counter")
we added an overlimits counter for each HTB class which could
properly reflect how many times we use up all the bandwidth
on each class. However, the overlimits counter in HTB qdisc
does not, it is way bigger than the sum of each HTB class.
In fact, this qdisc overlimits counter increases when we have
no skb to dequeue, which happens more often than we run out of
bandwidth.

It makes more sense to make this qdisc overlimits counter just
be a sum of each HTB class, in case people still get confused.

I have verified this patch with one single HTB class, where HTB
qdisc counters now always match HTB class counters as expected.

Eric suggested we could fold this field into 'direct_pkts' as
we only use its 32bit on 64bit CPU, this saves one cache line.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:55:20 -07:00
Heiner Kallweit
f452825d62 r8169: move EEE LED config to rtl8168_config_eee_mac
Move adjusting the EEE LED frequency to rtl8168_config_eee_mac.
Exclude RTL8411 (version 38) like in the existing code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:54:19 -07:00
Heiner Kallweit
1791ad50c8 r8169: simplify rtl_writephy_batch and rtl_ephy_init
Make both functions macros to allow omitting the ARRAY_SIZE(x) argument.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:53:57 -07:00
David S. Miller
0e5ef5a22a Merge branch 'Traffic-support-for-SJA1105-DSA-driver'
Vladimir Oltean says:

====================
Traffic support for SJA1105 DSA driver

This patch set is a continuation of the "NXP SJA1105 DSA driver" v3
series, which was split in multiple pieces for easier review.

Supporting a fully-featured (traffic-capable) driver for this switch
requires some rework in DSA and also leaves behind a more generic
infrastructure for other dumb switches that rely on 802.1Q pseudo-switch
tagging for port separation. Among the DSA changes required are:

* Generic xmit and rcv functions for pushing/popping 802.1Q tags on
  skb's. These are modeled as a tagging protocol of its own but which
  must be customized by drivers to fit their own hardware possibilities.

* Permitting the .setup callback to invoke switchdev operations that
  will loop back into the driver through the switchdev notifier chain.

The SJA1105 driver then proceeds to extend this 8021q switch tagging
protocol while adding its own (tag_sja1105). This is done because
the driver actually implements a "dual tagger":

* For normal traffic it uses 802.1Q tags

* For management (multicast DMAC) frames the switch has native support
  for recognizing and annotating these with source port and switch id
  information.

Because this is a "dual tagger", decoding of management frames should
still function when regular traffic can't (under a bridge with VLAN
filtering).
There was intervention in the DSA receive hotpath, where a new
filtering function called from eth_type_trans() is needed. This is
useful in the general sense for switches that might actually have some
limited means of source port decoding, such as only for management
traffic, but not for everything.
In order for the 802.1Q tagging protocol (which cannot be enabled under
all conditions, unlike the management traffic decoding) to not be an
all-or-nothing choice, the filtering function matches everything that
can be decoded, and everything else is left to pass to the master
netdevice.

Lastly, DSA core support was added for drivers to request skb deferral.
SJA1105 needs this for SPI intervention during transmission of link-local
traffic. This is not done from within the tagger.

Some patches were carried over unchanged from the previous patchset
(01/09). Others were slightly reworked while adapting to the recent
changes in "Make DSA tag drivers kernel modules" (02/09).

The introduction of some structures (DSA_SKB_CB, dp->priv) may seem a
little premature at this point and the new structures under-utilized.
The reason is that traffic support has been rewritten with PTP
timestamping in mind, and then I removed the timestamping code from the
current submission (1. it is a different topic, 2. it does not work very
well yet). On demand I can provide the timestamping patchset as a RFC
though.

"NXP SJA1105 DSA driver" v3 patchset can be found at:
https://lkml.org/lkml/2019/4/12/978

v1 patchset can be found at:
https://lkml.org/lkml/2019/5/3/877

Changes in v2:

* Made the deferred xmit workqueue also be drained on the netdev suspend
  callback, not just on ndo_stop.

* Added clarification about how other netdevices may be bridged with the
  switch ports.

v2 patchset can be found at:
https://www.spinics.net/lists/netdev/msg568818.html

Changes in v3:

* Exported the dsa_port_vid_add and dsa_port_vid_del symbols to fix an
  error reported by the kbuild test robot

* Fixed the following checkpatch warnings in 05/10:
  Macro argument reuse 'skb' - possible side-effects?
  Macro argument reuse 'clone' - possible side-effects?

* Added a commit description to the documentation patch (10/10)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:52:42 -07:00
Vladimir Oltean
0a58d471de Documentation: net: dsa: sja1105: Add info about supported traffic modes
This adds a table which illustrates what combinations of management /
regular traffic work depending on the state the switch ports are in.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 21:52:42 -07:00