Commit graph

982,081 commits

Author SHA1 Message Date
Christoph Hellwig
73ce6abae5 iomap: convert to SPDX identifier
Use SPDX-License-Identifier instead of GPLv2 boilerplate.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-04-28 08:34:02 -07:00
David S. Miller
5f0d736e7f Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-04-28

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Introduce BPF socket local storage map so that BPF programs can store
   private data they associate with a socket (instead of e.g. separate hash
   table), from Martin.

2) Add support for bpftool to dump BTF types. This is done through a new
   `bpftool btf dump` sub-command, from Andrii.

3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which
   was currently not supported since skb was used to lookup netns, from Stanislav.

4) Add an opt-in interface for tracepoints to expose a writable context
   for attached BPF programs, used here for NBD sockets, from Matt.

5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel.

6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to
   support tunnels such as sit. Add selftests as well, from Willem.

7) Various smaller misc fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28 08:42:41 -04:00
Kalle Valo
5c403533fb Fourth batch of patches intended for v5.1
* Fix an oops when we receive a packet with bogus lengths;
 * Fix a bug that prevented 5350 devices from working;
 * Fix a small merge damage from the previous series;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlzFUJAACgkQoUecoho8
 xfrECg//ejBGSZuq4XcyJB6H9In8Dz/VCgDrH6pOgQqREEvlmezhHRK5rtua/Kn7
 FxVe99hzu2JJqKbvji5S2E5xsABqBjobcZYqhGuIPSzKV14DkA8F9swXDN4MOKnc
 uWCb/iBcNPYYwu7tN4vo1LyJUeofPG4Mdn1kQ+YNAanXQ7lIiKEqZ2mw6U3iAWMG
 Om8RSBBmcexT7nC25eVEbnrYQ6pNs9V5uXSyZ8JLZL6vGkhc3pGBfsPyAjQ0EuKs
 L4yWj3DgOunuA1Ruh/fPNu5n4Fk7EK62H7TDC0SPecYuwlgLyU6pcWPBdGlsYC2Z
 +kV6D2AquL7R9N16ZsYoimU5N3AQeCvI6QWFkasYR91Zos8dbarCAGa9jB6/hpWq
 MnrtAqy6Ea4WupmooFwpFZc+RAhr6BPiQS6dv1KkhDBA9W3Nrc6m0EUQU9gSkQaB
 aq9vOvpZjRja+NbUX3cWw1QDXuabEIgx3TBurmxA6Mb+j25aa00kzkvqD6PvNJnM
 JaPc8enNjDiIZVvsoemTxh6GKpz+WQXz7yBh0ndynByDv7XuXtRyhr0MC2+o+oL6
 3oFYw0qjczl6DPtOrbEq7PQL+iq8muz14I3FrJfkEvYyCU6KHyvE+dJDxod7A7SQ
 ulpV8cL98Eq9XDMf/6bPowJGjgzAgQr7Odc8EZKmZKDjb2E7aC4=
 =7QM5
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-for-kalle-2019-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes

Fourth batch of patches intended for v5.1

* Fix an oops when we receive a packet with bogus lengths;
* Fix a bug that prevented 5350 devices from working;
* Fix a small merge damage from the previous series;
2019-04-28 14:25:33 +03:00
Oded Gabbay
a38693d775 habanalabs: return old dram bar address upon change
This patch changes the ASIC interface function that changes the DRAM bar
window. The change is to return the old address that the DRAM bar pointed
to instead of an error code.

This simplifies the code that use this function (mainly in debugfs) to
restore the bar to the old setting.

This is also needed for easier support in future ASICs.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-04-28 10:18:35 +03:00
Wenwen Wang
cb5173594d ALSA: usb-audio: Fix a memory leak bug
In parse_audio_selector_unit(), the string array 'namelist' is allocated
through kmalloc_array(), and each string pointer in this array, i.e.,
'namelist[]', is allocated through kmalloc() in the following for loop.
Then, a control instance 'kctl' is created by invoking snd_ctl_new1(). If
an error occurs during the creation process, the string array 'namelist',
including all string pointers in the array 'namelist[]', should be freed,
before the error code ENOMEM is returned. However, the current code does
not free 'namelist[]', resulting in memory leaks.

To fix the above issue, free all string pointers 'namelist[]' in a loop.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-28 09:11:50 +02:00
Luca Coelho
d156e67d3f iwlwifi: mvm: fix merge damage in iwl_mvm_vif_dbgfs_register()
When I rebased Greg's patch, I accidentally left the old if block that
was already there.  Remove it.

Fixes: 154d4899e4 ("iwlwifi: mvm: properly check debugfs dentry before using it")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28 09:59:59 +03:00
Emmanuel Grumbach
5c9adef978 iwlwifi: fix driver operation for 5350
We introduced a bug that prevented this old device from
working. The driver would simply not be able to complete
the INIT flow while spewing this warning:

 CSR addresses aren't configured
 WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917
 iwl_pci_probe+0x160/0x1e0 [iwlwifi]

Cc: stable@vger.kernel.org # v4.18+
Fixes: a8cbb46f83 ("iwlwifi: allow different csr flags for different device families")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: c8f1b51e50 ("iwlwifi: allow different csr flags for different device families")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28 09:59:59 +03:00
Luca Coelho
de1887c064 iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()
We don't check for the validity of the lengths in the packet received
from the firmware.  If the MPDU length received in the rx descriptor
is too short to contain the header length and the crypt length
together, we may end up trying to copy a negative number of bytes
(headlen - hdrlen < 0) which will underflow and cause us to try to
copy a huge amount of data.  This causes oopses such as this one:

BUG: unable to handle kernel paging request at ffff896be2970000
PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1
Hardware name: [...]
RIP: 0010:memcpy_erms+0x6/0x10
Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3
 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe
RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287
RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610
RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000
RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000
R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050
R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038
FS:  0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm]
 iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi]
 iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi]
 irq_thread_fn+0x24/0x49
 irq_thread+0xb0/0x122
 kthread+0x138/0x140
 ret_from_fork+0x1f/0x40

Fix that by checking the lengths for correctness and trigger a warning
to show that we have received wrong data.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28 09:59:59 +03:00
Colin Ian King
f341d89790 powerpc/mm: fix spelling mistake "Outisde" -> "Outside"
There are several identical spelling mistakes in warning messages,
fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-28 16:28:23 +10:00
Fuqian Huang
4ab1ae3453 ALSA: gus: fix misuse of %x
Pointers should be printed with %p or %px rather than
cast to long type and printed with %lx.
Drop the address printing.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-28 08:25:18 +02:00
Kailang Yang
607ca3bd22 ALSA: hda/realtek - EAPD turn on later
Let EAPD turn on after set pin output.

[ NOTE: This change is supposed to reduce the possible click noises at
  (runtime) PM resume.  The functionality should be same (i.e. the
  verbs are executed correctly) no matter which order is, so this
  should be safe to apply for all codecs -- tiwai ]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-28 08:23:53 +02:00
Kailang Yang
0700d3d117 ALSA: hda/realtek - Fixed Dell AIO speaker noise
Fixed Dell AIO speaker noise.
spec->gen.auto_mute_via_amp = 1, this option was solved speaker white
noise at boot.
codec->power_save_node = 0, this option was solved speaker noise at
resume back.

Fixes: 9226665159 ("ALSA: hda/realtek - Fix Dell AIO LineOut issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-28 08:20:14 +02:00
Vishal Kulkarni
b1a79360ee cxgb4: Delete all hash and TCAM filters before resource cleanup
During driver unload, hash/TCAM filter deletion doesn't wait for
completion.This patch deletes all the filters with completion before
clearing the resources.

Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 22:25:37 -04:00
Andrew Lunn
7324d50e47 net: dsa: mv88e6xxx: Remove legacy probe support
Remove the legacy method of probing the mv88e6xxx driver, now that all
the mainline boards have been converted to use mdio based probing for
a number of cycles.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 22:12:22 -04:00
Paolo Abeni
21f1b8a663 udp: fix GRO reception in case of length mismatch
Currently, the UDP GRO code path does bad things on some edge
conditions - Aggregation can happen even on packet with different
lengths.

Fix the above by rewriting the 'complete' condition for GRO
packets. While at it, note explicitly that we allow merging the
first packet per burst below gso_size.

Reported-by: Sean Tong <seantong114@gmail.com>
Fixes: e20cf8d3f1 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 22:07:24 -04:00
David S. Miller
6acda8fbbd Merge branch 'mv88e6060-cleanups'
Andrew Lunn says:

====================
mv88e6060 cleanups

This patchset performs some cleanups of the mv88e6060 DSA driver, as a
step towards making it an MDIO device, rather than use the old probing
method. The changes here are all pretty mechanical and only compile
tested.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:23:05 -04:00
Andrew Lunn
1ba22bf547 net: dsa: mv88e6060: Replace REG_READ macro
The REG_READ macro contains a return statement, making it not very
safe. Remove it by inlining the code.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:23:04 -04:00
Andrew Lunn
c4362c3743 net: dsa: mv88e6060: Replace REG_WRITE macro
The REG_WRITE macro contains a return statement, making it not very
safe. Remove it by inlining the code.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:23:04 -04:00
Andrew Lunn
3e8bc1b886 net: dsa: mv88e6060: Replace ds with priv
Pass around priv, not ds. This will help with changing to an mdio
driver, and makes this driver more like mv88e6xxx.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:23:04 -04:00
Andrew Lunn
406a4362c2 net: dsa: mv88e6060: Add SPDX header
Add an SPDX header, and remove the license text.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:23:04 -04:00
Murilo Fossa Vicentini
e56e251566 ibmvnic: Add device identification to requested IRQs
The ibmvnic driver currently uses the same fixed name when using
request_irq, this makes it hard to parse when multiple VNIC devices are
available at the same time. This patch adds the unit_address as the device
identification along with an id for each queue.

The original idea was to use the interface name as an identifier, but it
is not feasible given these requests happen at adapter probe, and at this
point netdev is not yet registered so it doesn't have the proper name
assigned to it.

Signed-off-by: Murilo Fossa Vicentini <muvic@linux.ibm.com>
Reviewed-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:20:06 -04:00
David S. Miller
fbef9478ff Merge branch 'tls-data-copies'
Jakub Kicinski says:

====================
net/tls: fix data copies in tls_device_reencrypt()

This series fixes the tls_device_reencrypt() which is broken
if record starts in the frags of the message skb.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:17:20 -04:00
Jakub Kicinski
eb3d38d5ad net/tls: fix copy to fragments in reencrypt
Fragments may contain data from other records so we have to account
for that when we calculate the destination and max length of copy we
can perform.  Note that 'offset' is the offset within the message,
so it can't be passed as offset within the frag..

Here skb_store_bits() would have realised the call is wrong and
simply not copy data.

Fixes: 4799ac81e5 ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:17:19 -04:00
Jakub Kicinski
97e1caa517 net/tls: don't copy negative amounts of data in reencrypt
There is no guarantee the record starts before the skb frags.
If we don't check for this condition copy amount will get
negative, leading to reads and writes to random memory locations.
Familiar hilarity ensues.

Fixes: 4799ac81e5 ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:17:19 -04:00
David S. Miller
026cc9c3ee cpsw: Put back cpsw_ndo_poll_controller()
To fix the build.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 20:08:25 -04:00
Linus Torvalds
25cce03b1d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Just a couple of fixups for Synaptics RMI4 driver and allowing
  snvs_pwrkey to be selected on more boards"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - write config register values to the right offset
  Input: synaptics-rmi4 - fix possible double free
  Input: snvs_pwrkey - make it depend on ARCH_MXC
2019-04-27 16:27:02 -07:00
David S. Miller
7cb523d4fe Merge branch 'net-ethernet-ti-clean-up-and-optimizations'
Grygorii Strashko says:

====================
net: ethernet: ti: clean up and optimizations

This is a preparation series for introducing new switchbase TI CPSW driver which
was originally introduced [1][2] by Ilias Apalodimas <ilias.apalodimas@linaro.org>
and also discussed in private mails and at Netdev x13 confernce.

Following discussions and suggestions (mostly by Andrew and Ivan) we going
to introduce the new driver which is operating in dual-emac mode
by default, thus working as 2 individual network interfaces.
When both interfaces joined the bridge - CPSW driver will enter a switch
mode and discard dual_mac configuration. The CPSW will be switched back
to dual_mac mode if any port leaves the bridge. All configuration is going to be
implemented via switchdev API.

Hence overall change is already very big I'm sending prerequisite patches which
are mostly minor fixes/clean ups and code refactoring to separate common parts
to be reused by both drivers.
Probably the most serious change from functional point of view is Patch 11.

These patches were NFS boot tetested on TI AM335x/AM437x/AM5xx boards.

These patches can be found at:
 git@git.ti.com:~gragst/ti-linux-kernel/gragsts-ti-linux-kernel.git
 branch: lkml-5.1-cpsw-clean-up-v2

changes in v2:
- added new patch 16 to get rid of force type conversation
- other chages metioned in patches
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
c24eef283a net: ethernet: ti: cpsw: move ethtool func in separate file
As a preparatory patch to add support for a switchdev based cpsw driver,
move common ethtool functions to separate cpsw-ethtool.c file so that they
can be used across both drivers. It will simplify CPSW driver code
maintenance also.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
cfc08345ec net: ethernet: ti: cpsw: switch to use mac sl api
Switch CPSW driver to use the new MAC SL API.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
a71a18f24d net: ethernet: ti: cpsw: introduce mac sl module api
The MAC SL submodule has a lot of common functions between many of TI SoCs
AM335x/AM437x/DRA7(AM57xx), Keystone 2 66AK2HK/E/L/G and K3 AM654, but
there are also differences especially in registers offsets and sets of
supported functions.

This patch introduces the MAC SL submodule API which is intended to provide
a common way to access the MAC SL submodule and hide HW integrations
details.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
e6a8462491 net: ethernet: ti: cpsw: move common hw init code in separate func
move common hw init code in separate function as preparation for adding new
switchdev driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
5dea398514 net: ethernet: ti: davinci_cpdma: use dma_addr_t for desc_mem_phys and desc_hw_addr
Use dma_addr_t for desc_mem_phys and desc_hw_addr to avoid types
conversions.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
814b4a67e5 net: ethernet: ti: cpsw: move cpsw definitions in priv header
As a preparatory patch to add a switchdev based cpsw driver move the common
header definitions to cpsw_priv.h. The plan is to develop a new driver on
switchdev driver model and obsolete the current cpsw driver after all
required functions are added to the new driver. This patch allows the same
header file to be re-used on both drivers during the transition period.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
83a8471ba2 net: ethernet: ti: cpsw: refactor probe to group common hw initialization
Rework probe to group common hw initialization:
- group resources request at the beginning of the probe
- move net device initialization and registration at the end of the probe
- drop cpsw_slave_init
as preparation of refactoring of common hw initialization code to
separate function.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
03f66f0675 net: ethernet: ti: davinci_mdio: use devm_ioremap()
The Davinci MDIO in most of the case implemented as module inside of TI
CPSW subsystem and fully depends on CPSW to be enabled, but historically
it's implemented as separate Platform device/driver and defined in DT files
in two ways:
- as standalone node
- as child node of CPSW subsystem.

In later case it's required to split CPSW subsystem "reg" property to
exclude MDIO I/O range which is not useful.

Hence, replace devm_ioremap_resource() with devm_ioremap() to allow define
full I/O range in parent CPSW subsystem without spliting.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
7cb528c553 net: ethernet: ti: ale: do not auto delete mcast super entries
Do not delete multicast supervisory packet's (SUPER) entries while flushing
multicast addresses from ALE table cpsw_ale_flush_multicast(). Those
entries have to be added/removed only explicitly.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
06095f34f8 net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac mode
Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood
Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port
belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is
working in non dual_mac mode, but in dual_mac - it causes
enabling/disabling ALLMULTI flag for both ports.

Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to
specify ALE port number for which ALLMULTI has to be enabled and check if
port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
91c88659a7 net: ethernet: ti: ale: use define for host port in cpsw_ale_set_allmulti()
Use ALE_PORT_HOST define for host port in cpsw_ale_set_allmulti() instead
of constants.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:49 -04:00
Grygorii Strashko
af9f4e6a33 net: ethernet: ti: ale: fix mcast super setting
Use correct define ALE_SUPER for ALE Multicast Address Table Entry
Supervisory Packet (SUPER) bit setting instead of ALE_BLOCKED. No issues
were observed till now as it have never been set, but it's going to be used
by new CPSW switch driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
10ae805477 net: ethernet: ti: cpsw: drop cpsw_tx_packet_submit()
Drop unnecessary wrapper function cpsw_tx_packet_submit() which is used
only in one place.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
d183a9428d net: ethernet: ti: cpsw: use devm_alloc_etherdev_mqs()
Use devm_alloc_etherdev_mqs() and simplify code.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
56bf8a5df3 net: ethernet: ti: cpsw: drop pinctrl_pm_select_default_state call
Drop pinctrl_pm_select_default_state call from probe as default
pinctrl state is set by DD core.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
c8fb566875 net: ethernet: ti: cpsw: use local var dev in probe
Use local variable struct device *dev in probe to simplify code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
9763a891a5 net: ethernet: ti: cpsw: update cpsw_split_res() to accept cpsw_common
Update cpsw_split_res() to accept struct cpsw_common instead of
struct net_device to simplify code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
16f5416482 net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE config option
All TI drivers CPSW/NETCP can't work without ALE, hence simplify
build of those drivers by always linking cpsw_ale and drop
CONFIG_TI_CPSW_ALE config option.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
99f6297182 net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config option
Both drivers CPSW and EMAC can't work without CPDMA, hence simplify build
of those drivers by always linking davinci_cpdma and drop TI_DAVINCI_CPDMA
config option.
Note. the davinci_emac driver module was changed to "ti_davinci_emac" to
make build work.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
Grygorii Strashko
68cf027f3d net: ethernet: ti: convert to SPDX license identifiers
Replace textual license with SPDX-License-Identifier.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:11:48 -04:00
David S. Miller
84ee91640f Merge branch 'strict-netlink-validation'
Johannes Berg says:

====================
strict netlink validation

Here's a respin, with the following changes:
 * change message when rejecting unknown attribute types (David Ahern)
 * drop nl80211 patch - I'll apply it separately
 * remove NL_VALIDATE_POLICY - we have a lot of calls to nla_parse()
   that really should be without a policy as it has previously been
   validated - need to find a good way to handle this later
 * include the correct generic netlink change (d'oh, sorry)
====================

Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:07:22 -04:00
Johannes Berg
ef6243acb4 genetlink: optionally validate strictly/dumps
Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.

Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:

    @@
    identifier ops;
    expression X;
    @@
    struct genl_ops ops[] = {
    ...,
     {
            .cmd = X,
    +       .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
            ...
     },
    ...
    };

For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:07:22 -04:00
Johannes Berg
56738f4608 netlink: add strict parsing for future attributes
Unfortunately, we cannot add strict parsing for all attributes, as
that would break existing userspace. We currently warn about it, but
that's about all we can do.

For new attributes, however, the story is better: nobody is using
them, so we can reject bad sizes.

Also, for new attributes, we need not accept them when the policy
doesn't declare their usage.

David Ahern and I went back and forth on how to best encode this, and
the best way we found was to have a "boundary type", from which point
on new attributes have all possible validation applied, and NLA_UNSPEC
is rejected.

As we didn't want to add another argument to all functions that get a
netlink policy, the workaround is to encode that boundary in the first
entry of the policy array (which is for type 0 and thus probably not
really valid anyway). I put it into the validation union for the rare
possibility that somebody is actually using attribute 0, which would
continue to work fine unless they tried to use the extended validation,
which isn't likely. We also didn't find any in-tree users with type 0.

The reason for setting the "start strict here" attribute is that we
never really need to start strict from 0, which is invalid anyway (or
in legacy families where that isn't true, it cannot be set to strict),
so we can thus reserve the value 0 for "don't do this check" and don't
have to add the tag to all policies right now.

Thus, policies can now opt in to this validation, which we should do
for all existing policies, at least when adding new attributes.

Note that entirely *new* policies won't need to set it, as the use
of that should be using nla_parse()/nlmsg_parse() etc. which anyway
do fully strict validation now, regardless of this.

So in effect, this patch only covers the "existing command with new
attribute" case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:07:22 -04:00