The reference to iloc.bh has been dropped in ext4_mark_iloc_dirty.
However, the reference is dropped again if error occurs during
ext4_handle_dirty_metadata, which may result in use-after-free bugs.
Fixes: fb265c9cb49e("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
- Remove SNVS clock from i.MX7UPL clock driver and bindings, as the
clock will be visible on M4 core only, and never be accessed by
Cortex-A cores.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcvThaAAoJEFBXWFqHsHzOoR0H/0AjB+fmbMoeGEpo0pZjPFyw
RbQ/+UavX0Yy4z4LJmYw3y3n7/cLvyv8Edg/BRXCvgX6dmjHa6sOSW3rZSD7BWUp
Jg6m/NCkaq4GRFOfXrs+vzmjtEECyq5j6EV9QG8w3ZBEU733FkcQgMTsOmK9u7kF
fxUfz7PReS6ZPk276gTMwWaNOl1R6W8eaHjiK0F1LQIcZfPRcsPtFRFkriQ27m/7
MOJ5Wjpf5804qis3p8gDIc/Z+wPaf5QF0exNKL/55INjVeSwCw81TAqTpFWrkrgj
lF2DTXgBHVO9S03I5/d5CNFCYdlP7EbgRD5CoH7mWrqEiBnvUUAxhe5zlm4etno=
=4yV1
-----END PGP SIGNATURE-----
Merge tag 'clk-imx7ulp-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-imx
Pull i.MX7UPL clk changes from Shawn Guo:
- Remove SNVS clock from i.MX7UPL clock driver and bindings, as the
clock will be visible on M4 core only, and never be accessed by
Cortex-A cores
* tag 'clk-imx7ulp-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: clock: imx7ulp: remove SNVS clock
clk: imx7ulp: remove snvs clock
- A couple of patches from Jonathan Neuschäfer to improve i.MX5 clock
driver for i.MX50 support.
- Rename file clk-imx51-imx53.c to clk-imx5.c, as it covers support for
all i.MX5 series SoCs including i.MX50.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcvTXlAAoJEFBXWFqHsHzO9oAH+wQtUGOJw7Yiu/UcjGQmoWRJ
0MRLknDBlVBTKSqZLVoFsm2xRyCkdHA7QB3OaCui4I40pdwoCOxDFHUOc2PTwBk2
kr0tHiiYoYXF6oZioD5tCh2zLHNuCIYy+TLzwG4jVavUCQAnQE8jzE59kiEvxBVg
9dvVxRjiIcHg0azm/oRsD+HQYwZ0ALMkLcAtbP1GGgsHeoSbaPJsYQCmj+9jDP8t
OKwgtum7DeYFlelCMF70BubA3NmAFz3uKrgh1lXRGSM5nm2aMmuNyypFIN6c7E53
ELWfXvRLfncl5uipeIc5Km5r0L+AwBQmH9aOyzd3i4Ys2z3Kp5atSEhuqbDWnDI=
=udGf
-----END PGP SIGNATURE-----
Merge tag 'clk-imx5-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-imx
Pull i.MX5 clk changes from Shawn Guo:
- A couple of patches from Jonathan Neuschäfer to improve i.MX5 clock
driver for i.MX50 support
- Rename file clk-imx51-imx53.c to clk-imx5.c, as it covers support for
all i.MX5 series SoCs including i.MX50
* tag 'clk-imx5-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
clk: imx: rename clk-imx51-imx53.c to clk-imx5.c
clk: imx5: Fix i.MX50 ESDHC clock registers
clk: imx5: Fix i.MX50 mainbus clock registers
The word 'idr' is scattered throughout the API, so I haven't changed it,
but the 'idr' variable is now an XArray.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* Bump the 20000-series FW API version supported;
* Work on the new debugging infra continues;
* One clean-up to prevent a bogus warning with clang;
* A small cleanup in the PCI ID list;
* Work on new hardware continues;
* RTT confidence indication support for FTM;
* An improvement in HE rate-scaling;
-----BEGIN PGP SIGNATURE-----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=JJSw
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2019-04-18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Third batch of patches intended for v5.2
* Bump the 20000-series FW API version supported;
* Work on the new debugging infra continues;
* One clean-up to prevent a bogus warning with clang;
* A small cleanup in the PCI ID list;
* Work on new hardware continues;
* RTT confidence indication support for FTM;
* An improvement in HE rate-scaling;
Compilation fails if any of undeclared clk_set_*() functions are in use
and CONFIG_HAVE_CLK=n.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
According to the Tegra124 TRM documentation, PLLM_MISC2 register doesn't
have the lock-enable bit as well as any other PLLM-related register. Hence
PLLM re-locking can't be initiated by software. The incorrect bit setting
should have been harmless since that bit is undefined according to TRM.
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are wrongly set parenthesis in the code that are resulting in a
wrong configuration being programmed for PLLM. The original fix was made
by Danny Huang in the downstream kernel. The patch was tested on Nyan Big
Tegra124 chromebook, PLLM rate changing works correctly now and system
doesn't lock up after changing the PLLM rate due to EMC scaling.
Cc: <stable@vger.kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The trim support in mtip32xx has been "temporarily" disabled for 6
years, which is 3/4 of the time the driver even exists in the tree.
Remove it as it obviously is dead code now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for the V4L2_PIX_FMT_RGBA555, V4L2_PIX_FMT_RGBX555,
V4L2_PIX_FMT_ABGR555, V4L2_PIX_FMT_XBGR555, V4L2_PIX_FMT_BGRA555 and
V4L2_PIX_FMT_BGRX555 formats to the VSP driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the V4L2_PIX_FMT_RGBA444, V4L2_PIX_FMT_RGBX444,
V4L2_PIX_FMT_ABGR444, V4L2_PIX_FMT_XBGR444, V4L2_PIX_FMT_BGRA444 and
V4L2_PIX_FMT_BGRX444 formats to the VSP driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the V4L2_PIX_FMT_BGRA32, V4L2_PIX_FMT_BGRX32,
V4L2_PIX_FMT_RGBA32 and V4L2_PIX_FMT_RGBX32 formats to the VSP driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The V4L2 API is missing the 16-bit RGB555 formats for the RGBA, RGBX,
ABGR, XBGR, BGRA and BGRX component orders. Add them, using the same
4CCs as DRM.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The V4L2 API is missing the 16-bit RGB4444 formats for the RGBA, RGBX,
ABGR, XBGR, BGRA and BGRX component orders. Add them, using the same
4CCs as DRM.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Local variable *reserved* of remove_dquot_ref() is only used if
define CONFIG_QUOTA_DEBUG, but not ebraced in CONFIG_QUOTA_DEBUG
macro, which leads to unused-but-set-variable warning when compiling.
This patch ebrace it into CONFIG_QUOTA_DEBUG macro like what is done
in add_dquot_ref().
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The V4L2 API is missing the 32-bit RGB formats for the ABGR, XBGR, RGBA
and RGBX component orders. Add them, using the same 4CCs as DRM.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If our target exposed a namespace with a block size that is greater
than PAGE_SIZE, set 0 capacity on the namespace as we do not support it.
This issue encountered when the nvmet namespace was backed by a tempfile.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
struct nvme_rdma_cm_rej has two different attributes: recfmt and sts.
And sts will have value what this comment wanted to show.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Firstly it doesn't make sense to handle timeout for loop: 1) for admin
queue, the request is always completed in code path of queuing IO. 2)
for normal IO request, the timeout on these IOs have been handled by
underlying queue already.
Secondly nvme-loop's timeout handler is simply broken, and easy to
cause issue: 1) no any sync/protection between timeout and normal
completion, and now it is driver's responsibility to deal with
that; 2) bad reset implementation, blk_mq_update_nr_hw_queues()
is called after all NSs's queue is stopped(quiesced), and easy
to trigger deadlock.
So kill the timeout handler.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewd-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
usually nvme_ prefix is for core functions.
While we're cleaning up, remove redundant empty lines
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.
Fixes: 4c174e6366 ("nvme-rdma: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.
Fixes: 39d5775746 ("nvme-tcp: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The host may support it, but nothing prevents us from
sending a single r2t at a time like we do anyways.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When the backing file is a tempfile for example, the inode i_blkbits
can be 1M in size which causes problems for hosts to support as the
disk block size. Instead, expose the minimum between i_blkbits and
12 (4K sector size).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by:- Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Build breaks:
drivers/nvme/target/core.c: In function 'nvmet_req_alloc_sgl':
drivers/nvme/target/core.c:939:12: error: implicit declaration of \
function 'sgl_alloc'; did you mean 'bio_alloc'? \
[-Werror=implicit-function-declaration]
req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt);
^~~~~~~~~
bio_alloc
drivers/nvme/target/core.c:939:10: warning: assignment makes pointer \
from integer without a cast [-Wint-conversion]
req->sg = sgl_alloc(req->transfer_len, GFP_KERNEL, &req->sg_cnt);
^
drivers/nvme/target/core.c: In function 'nvmet_req_free_sgl':
drivers/nvme/target/core.c:952:3: error: implicit declaration of \
function 'sgl_free'; did you mean 'ida_free'? [-Werror=implicit-function-declaration]
sgl_free(req->sg);
^~~~~~~~
ida_free
Cause:
1. missing include to <linux/scatterlist.h>
2. SGL_ALLOC needs to be enabled
Therefore adding the missing include, as well as Kconfig dependency.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet_subsys_alloc() returns its pointer or NULL if it fails. We can
see three different steps in this function:
1. memory allocation
2. argument check
3. memory allocation for string
But now the callers of this function do not seem to handle case 2 by
returning -ENOMEM only even if it fails with an invalid parameter.
This patch specifies error codes so that caller can pass it to its own
caller.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use NVMe namings for improving code readability.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Initialize it during command allocation.
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This involves initializing the boot params EFI related fields and the
efi global variable.
Without this fix a PVH dom0 doesn't detect when booted from EFI, and
thus doesn't support accessing any of the EFI related data.
Reported-by: PGNet Dev <pgnet.dev@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # 4.19+
Drop LIST_HEAD where the variable it declares is never used.
The declarations were introduced with the file, but the declared
variables were not used.
Fixes: 1107ba885e ("xen: add xenfs to allow usermode <-> Xen interaction")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
It's time to officially admit I'm not doing anything useful for
mach-davinci anymore. Since Bartosz is bringing all the code I wrote
10+ years ago into the modern era, he should take over.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Sphinx really wants colons after arguments :/
Fixes the following warnings:
drm_gem.c:1384: warning: Function parameter or member 'fence_array' not described in 'drm_gem_fence_array_add'
drm_gem.c:1384: warning: Function parameter or member 'fence' not described in 'drm_gem_fence_array_add'
drm_gem.c:1435: warning: Function parameter or member 'fence_array' not described in 'drm_gem_fence_array_add_implicit'
drm_gem.c:1435: warning: Function parameter or member 'obj' not described in 'drm_gem_fence_array_add_implicit'
drm_gem.c:1435: warning: Function parameter or member 'write' not described in 'drm_gem_fence_array_add_implicit'
Fixes: 5d5a179d3e ("drm: Add helpers for setting up an array of dma_fence dependencies.")
Cc: Eric Anholt <eric@anholt.net>
Cc: Qiang Yu <yuq825@gmail.com> (v1)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424204916.222155-1-sean@poorly.run
Clang's integrated assembler does not allow assembly macros defined
in one inline asm block using the .macro directive to be used across
separate asm blocks. LLVM developers consider this a feature and not a
bug, recommending code refactoring:
https://bugs.llvm.org/show_bug.cgi?id=19749
As binutils doesn't allow macros to be redefined, this change uses
UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros
in-place and workaround gcc and clang limitations on redefining macros
across different assembler blocks.
Specifically, the current state after preprocessing looks like this:
asm volatile(".macro mXX_s ... .endm");
void f()
{
asm volatile("mXX_s a, b");
}
With GCC, it gives macro redefinition error because sysreg.h is included
in multiple source files, and assembler code for all of them is later
combined for LTO (I've seen an intermediate file with hundreds of
identical definitions).
With clang, it gives macro undefined error because clang doesn't allow
sharing macros between inline asm statements.
I also seem to remember catching another sort of undefined error with
GCC due to reordering of macro definition asm statement and generated
asm code for function that uses the macro.
The solution with defining and undefining for each use, while certainly
not elegant, satisfies both GCC and clang, LTO and non-LTO.
Co-developed-by: Alex Matveev <alxmtvv@gmail.com>
Co-developed-by: Yury Norov <ynorov@caviumnetworks.com>
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When the maximum send wr delivered by the user is zero, the qp does not
have a sq.
When allocating the sq db buffer to store the user sq pi pointer and map
it to the kernel mode, max_send_wr is used as the trigger condition, while
the kernel does not consider the max_send_wr trigger condition when
mapmping db. It will cause sq record doorbell map fail and create qp fail.
The failed print information as follows:
hns3 0000:7d:00.1: Send cmd: tail - 418, opcode - 0x8504, flag - 0x0011, retval - 0x0000
hns3 0000:7d:00.1: Send cmd: 0xe59dc000 0x00000000 0x00000000 0x00000000 0x00000116 0x0000ffff
hns3 0000:7d:00.1: sq record doorbell map failed!
hns3 0000:7d:00.1: Create RC QP failed
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
With the z14 machine there came also a CPACF hardware extension
which provides a True Random Number Generator. This TRNG can
be accessed with a new subfunction code within the CPACF prno
instruction and provides random data with very high entropy.
So if there is a TRNG available, let's use it for initial seeding
and reseeding instead of the current implementation which tries
to generate entropy based on stckf (store clock fast) jitters.
For details about the amount of data needed and pulled for
seeding and reseeding there can be explaining comments in the
code found.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Here is a rework of the generate_entropy function of the pseudo random
device driver exploiting the prno CPACF instruction.
George Spelvin pointed out some issues with the existing
implementation. One point was, that the buffer used to store the stckf
values is 2 pages which are initially filled with get_random_bytes()
for each 64 byte junk produced by the function. Another point was that
the stckf values only carry entropy in the LSB and thus a buffer of
2 pages is not really needed. Then there was a comment about the use
of the kimd cpacf function without proper initialization.
The rework addresses these points and now one page is used and only
one half of this is filled with get_random_bytes() on each chunk of 64
bytes requested data. The other half of the page is filled with stckf
values exored into with an overlap of 4 bytes. This can be done due to
the fact that only the lower 4 bytes carry entropy we need. For more
details about the algorithm used, see the header of the function.
The generate_entropy() function now uses the cpacf function klmd with
proper initialization of the parameter block to perform the sha512
hash.
George also pointed out some issues with the internal buffers used for
seeding and reads. These buffers are now zeroed with memzero_implicit
after use.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reported-by: George Spelvin <lkml@sdf.org>
Suggested-by: George Spelvin <lkml@sdf.org>
Reviewed-by: Patrick Steuer <steuer@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ariel Levkovich says:
====================
The series exposes the ICM address of the receive transport
interface (TIR) of Raw Packet and RSS QPs to the user since they are
required to properly create and insert steering rules that direct flows to
these QPs.
====================
For dependencies this branch is based on mlx5-next from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
* branch 'mlx5_tir_icm':
IB/mlx5: Expose TIR ICM address to user space
net/mlx5: Introduce new TIR creation core API
net/mlx5: Expose TIR ICM address in command outbox
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Provide byte-range file locking emulation that can be configured at mount
time to one of four modes:
(1) flock=local. Locking is done locally only and no reference is made to
the server.
(2) flock=openafs. Byte-range locking is done locally only; whole-file
locking is done with reference to the server. Whole-file locks cannot
be upgraded unless the client holds an exclusive lock.
(3) flock=strict. Byte-range and whole-file locking both require a
sufficient whole-file lock on the server.
(4) flock=write. As strict, but the client always gets an exclusive
whole-file lock on the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Add four more tracepoints:
(1) afs_make_fs_call1 - Split from afs_make_fs_call but takes a filename
to log also.
(2) afs_make_fs_call2 - Like the above but takes two filenames to log.
(3) afs_lookup - Log the result of doing a successful lookup, including a
negative result (fid 0:0).
(4) afs_get_tree - Log the set up of a volume for mounting.
It also extends the name buffer on the afs_edit_dir tracepoint to 24 chars
and puts quotes around the filename in the text representation.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement sillyrename for AFS unlink and rename, using the NFS variant
implementation as a basis.
Note that the asynchronous file locking extender/releaser has to be
notified with a state change to stop it complaining if there's a race
between that and the actual file deletion.
A tracepoint, afs_silly_rename, is also added to note the silly rename and
the cleanup. The afs_edit_dir tracepoint is given some extra reason
indicators and the afs_flock_ev tracepoint is given a silly-delete file
lock cancellation indicator.
Signed-off-by: David Howells <dhowells@redhat.com>
Holding a file lock on an AFS file does not prevent it from being deleted
on the server, so we need to handle an error resulting from that when we
try setting, extending or releasing a lock.
Fix this by adding a "deleted" lock state and cancelling the lock extension
process for that file and aborting all waiters for the lock.
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Improve the content of directory check failure reports from:
kAFS: afs_dir_check_page(6d57): bad magic 1/2 is 0000
to dump more information about the individual blocks in a directory page.
Signed-off-by: David Howells <dhowells@redhat.com>
Add two tracepoints for monitoring AFS file locking. Firstly, add one that
follows the operational part:
echo 1 >/sys/kernel/debug/tracing/events/afs/afs_flock_op/enable
And add a second that more follows the event-driven part:
echo 1 >/sys/kernel/debug/tracing/events/afs/afs_flock_ev/enable
Individual file_lock structs seen by afs are tagged with debugging IDs that
are displayed in the trace log to make it easier to see what's going on,
especially as setting the first lock always seems to involve copying the
file_lock twice.
Signed-off-by: David Howells <dhowells@redhat.com>
Further fix the file locking in the afs filesystem client in a number of
ways, including:
(1) Don't submit the operation to obtain a lock from the server in a work
queue context, but rather do it in the process context of whoever
issued the requesting system call.
(2) The owner of the file_lock struct at the front of the pending_locks
queue now owns right to talk to the server.
(3) Write locks can be instantly granted if they don't overlap with any
other locks *and* we have a write lock on the server.
(4) In the event of an authentication/permission error, all other matching
pending locks requests are also immediately aborted.
(5) Properly use VFS core locks_lock_file_wait() to distribute the server
lock amongst local client locks, including waiting for the lock to
become available.
Test with:
sqlite3 /afs/.../scratch/billings.sqlite <<EOF
CREATE TABLE hosts (
hostname varchar(80),
shorthost varchar(80),
room varchar(30),
building varchar(30),
PRIMARY KEY(shorthost)
);
EOF
With the version of sqlite3 that I have, this should fail consistently with
EAGAIN, whether or not the program is straced (which introduces some delays
between lock syscalls).
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>