Commit graph

982,081 commits

Author SHA1 Message Date
Dave Airlie
35a280219b drm/legacy: move map cleanups into drm_bufs.c
This makes it easier to clean this up later.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-24 12:32:13 +10:00
Dave Airlie
15e60851e1 drm/legacy: move drm_legacy_master_rmmaps to non-driver legacy header.
This isn't used by drivers, and won't be in the future.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-24 12:32:11 +10:00
Dave Airlie
b30a43ac71 drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)
There was a nouveau DDX that relied on legacy context ioctls to work,
but we fixed it years ago, give distros that have a modern DDX the
option to break the uAPI and close the mess of holes that legacy
context support is.

Full context of the story:

commit 0e975980d4
Author: Peter Antoine <peter.antoine@intel.com>
Date:   Tue Jun 23 08:18:49 2015 +0100

    drm: Turn off Legacy Context Functions

    The context functions are not used by the i915 driver and should not
    be used by modeset drivers. These driver functions contain several bugs
    and security holes. This change makes these functions optional can be
    turned on by a setting, they are turned off by default for modeset
    driver with the exception of the nouvea driver that may require them with
    an old version of libdrm.

    The previous attempt was

    commit 7c510133d9
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Aug 8 15:41:21 2013 +0200

        drm: mark context support as a legacy subsystem

    but this had to be reverted

    commit c21eb21cb5
    Author: Dave Airlie <airlied@redhat.com>
    Date:   Fri Sep 20 08:32:59 2013 +1000

        Revert "drm: mark context support as a legacy subsystem"

    v2: remove returns from void function, and formatting (Daniel Vetter)

    v3:
    - s/Nova/nouveau/ in the commit message, and add references to the
      previous attempts
    - drop the part touching the drm hw lock, that should be a separate
      patch.

    Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2)
    Cc: Peter Antoine <peter.antoine@intel.com> (v2)
    Reviewed-by: Peter Antoine <peter.antoine@intel.com>
    Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

v2: move DRM_VM dependency into legacy config.
v3: fix missing dep (kbuild robot)

Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-24 12:32:10 +10:00
Inki Dae
8b9550344d drm/ipp: clean up debug messages
Print out debug messages with correct device name.

As for this, this patch adds device pointer to exynos_drm_ipp structure,
and in case of exynos_drm_ipp_task structure, replace drm_device pointer
with device one. This will make each ipp driver to print out debug
messages with correct device name.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24 11:23:20 +09:00
Inki Dae
df90a64eaf drm/vidi: replace platform_device pointer with device one
Add device pointer to vidi_context and remove platform_device pointer.

It doesn't need for vidi_context to contain platform_device object.
Instead, this patch makes this driver more simply by replacing platform_device
pointer with device one.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24 11:23:20 +09:00
Inki Dae
6be900563a drm/exynos: use DRM_DEV_DEBUG* instead of DRM_DEBUG macro
Use DRM_DEV_DEBUG* instead of DRM_DEBUG macro to print out
debug messages.

This patch just cleans up the use of debug log macro, which changes
the log macro to DRM_DEV_DEBUG*.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24 11:23:20 +09:00
Inki Dae
6f83d20838 drm/exynos: use DRM_DEV_ERROR to print out error message
This patch just cleans up the use of error log macro, which changes
the log macro to DRM_DEV_ERROR.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24 11:23:20 +09:00
Inki Dae
62f28738f1 drm/exynos: remove unnecessary messages
This patch removes unnecessary messages from fimd_clear_channels
and decon_clear_channels functions which print out just function
name.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24 11:23:20 +09:00
Inki Dae
e59305305c drm/fimd: use DRM_ERROR instead of DRM_INFO in error case
This patch makes error messages to be printed out using DRM_ERROR
instead of DRM_INFO.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24 11:23:20 +09:00
Seung-Woo Kim
f9af3f846c drm/exynos: g2d: remove style error
Remove checkpatch error, "foo* bar" should be "foo *bar".

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24 11:23:20 +09:00
Dave Airlie
70b5f09e43 Merge tag 'drm-msm-next-2019-04-21' of https://gitlab.freedesktop.org/drm/msm into drm-next
This time around it is a bunch of cleanup and fixes, expanding gpu
"zap" shader support (so we can take the GPU out of secure mode on
boot) to a6xx, and small UABI extension to support robustness (see
mesa MR 673).

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsHwsEfi4y2LYKSqeqDEYvffwVgKhiP8jHcHpxp13J5LQ@mail.gmail.com
2019-04-24 11:56:32 +10:00
Colin Ian King
66c031716b net: atheros: fix spelling mistake "underun" -> "underrun"
There are spelling mistakes in structure elements, fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 18:46:27 -07:00
Dave Airlie
42f1a01330 Merge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-next
- Add the amdgpu specific bits for timeline support
- Add internal interfaces for xgmi pstate support
- DC Z ordering fixes for planes
- Add support for NV12 planes in DC
- Add colorspace properties for planes in DC
- eDP optimizations if the GOP driver already initialized eDP
- DC bandwidth validation tracing support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419150034.3473-1-alexander.deucher@amd.com
2019-04-24 11:46:19 +10:00
Simon Horman
0a5d329ffd ravb: Avoid unsupported internal delay mode for R-Car E3/D3
According to the R-Car Gen3 Hardware Manual Rev 1.50 of Nov 30, 2018, the
TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) or D3
(r8a77995). And by extension it is also not supported by RZ/G2E (r9a774c0).

This matches all ES versions of the affected SoCs as it is
not clear if this problem will be resolved in newer chips.
This can be revisited, as necessary.

This patch does not error-out if PHY_INTERFACE_MODE_RGMII_ID or
PHY_INTERFACE_MODE_RGMII_TXID are used on SoCs where TX clock delay
mode is not supported as there is a risk of introducing a regression
when used in conjunction with older DT blobs present in the field.
Rather, a warning is logged in such cases.

Based on work by Kazuya Mizuguchi.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 18:43:49 -07:00
Stephen Rothwell
c98f4822ed net: fix sparc64 compilation of sock_gettstamp
net/core/sock.c: In function 'sock_gettstamp':
net/core/sock.c:3007:23: error: expected '}' before ';' token
    .tv_sec = ts.tv_sec;
                       ^
net/core/sock.c:3011:4: error: expected ')' before 'return'
    return -EFAULT;
    ^~~~~~
net/core/sock.c:3013:2: error: expected expression before '}' token
  }
  ^

Fixes: c7cbdbf29f ("net: rework SIOCGSTAMP ioctl handling")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 18:35:17 -07:00
Fuqian Huang
0fa4122b2d isdn:mISDN: fix misuse of %x in hfcpci.c
Pointers should be printed with %p or %px rather than
cast to (u_long) and printed with %lx.
Change %lx to %p to print the pointer.
Change %lx to %pad to print the dma_addr_t.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 18:33:30 -07:00
Fuqian Huang
6f9fd97e3a isdn: hisax: Fix misuse of %x in config.c
Pointers should be printed with %p or %px rather than
cast to (u_long) type and printed with %lX.
As the function seems to be for debug purpose.
Change %lX to %px to print the pointer value.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 18:33:30 -07:00
Dave Airlie
a0cecc23cf Revert "drm/virtio: drop prime import/export callbacks"
This patch does more harm than good, as it breaks both Xwayland and
gnome-shell with X11.

Xwayland requires DRI3 & DRI3 requires PRIME.

X11 crash for obscure double-free reason which are hard to debug
(starting X11 by hand doesn't trigger the crash).

I don't see an apparent problem implementing those stub prime
functions, they may return an error at run-time, and it seems to be
handled fine by GNOME at least.

This reverts commit b318e3ff7c.
[airlied:
This broke userspace for virtio-gpus, and regressed things from DRI3 to DRI2.

This brings back the original problem, but it's better than regressions.]

Fixes: b318e3ff7c ("drm/virtio: drop prime import/export callbacks")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-24 10:52:52 +10:00
Dave Airlie
9fa246256e Revert "drm/i915/fbdev: Actually configure untiled displays"
This reverts commit d179b88deb.

This commit is documented to break userspace X.org modesetting driver in certain configurations.

The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.

This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v3.19+
2019-04-24 10:47:56 +10:00
Dave Airlie
6e865c7230 drm/tegra: Changes for v5.2-rc1
This contains a fix for the usage of shared resets that previously
 generated a WARN on boot. In addition, there's a fix for CPU cache
 maintenance of GEM buffers allocated using get_pages().
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAly4k7gTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoUqkD/oC21pwikg0nYh1LoiH7GbmA3NPm56o
 Ei0cx9p8KyHUT0ongxmr0wfvyfCjwCqlFPWJOZrFOXjUmIupUooTbsqnAiHwEQE8
 6m2FaZXRpYc8VYk7+uW4u1MhmWr7fStuxVs/GKVZBK7jaxn3MXouL6fP3cOc8QK1
 GZdek2hxMDkvK1PnDc0MRx+COxsi3pMRL8hwBj++1EWPh3SGuOBsaj8S9dxXwSXH
 TrNCIpGV6BOL6y9g9uDGmqDM6lef90Dx0mRneuWK3pQoCbQJDMUsdVuNEKYI+wqZ
 hrfG9TZWeamK42OSX5GDM/DJwtb2K1z58Z410dlmc1IK9Inw7LcpYDHdoZQSmBgv
 5KwYgeqjQSYV9Ok1D0SY3grdroufg6PSHuE+VgD4SpQ4pbBrBvPUqxpi4icY0re9
 Td3FBzHzEMB14QWXIKWXfG7fd9pAKSesxaRaI3G9mtJrI1kIeRa3/0z8MQtSwbOg
 fxAZYXkCS2aeo9h6Owmhqm/lgYuv/SJ/1NOwLVJ6tgoI1rN0ukMe2OCPCOFmY7AJ
 ehiVBfXY7bjVYW3yhCUdm4w5ju/lmO5g2N4nqdpmcpvOz4QZE0aviPqcA5hiMfMQ
 5WKakqrJ1NGVMTQtKJxGgUq3BXEFqnMpKUkUMT+KVQinMjZOEu1klxlg4ScyZVdd
 Ly0z3PjsUbv+6g==
 =nA5m
 -----END PGP SIGNATURE-----

Merge tag 'drm/tegra/for-5.2-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v5.2-rc1

This contains a fix for the usage of shared resets that previously
generated a WARN on boot. In addition, there's a fix for CPU cache
maintenance of GEM buffers allocated using get_pages().

(airlied: contains a merge from a shared tegra tree)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418151447.9430-1-thierry.reding@gmail.com
2019-04-24 10:30:45 +10:00
David S. Miller
6b18bdfdba Merge branch 'ipv6-fib6_ref-conversion-to-refcount_t'
Eric Dumazet says:

====================
ipv6: fib6_ref conversion to refcount_t

We are chasing use-after-free in IPv6 that could have their origin
in fib6_ref 0 -> 1 transitions.

This patch series should help finding the root causes if these
illegal transitions ever happen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:19:48 -07:00
Eric Dumazet
f05713e091 ipv6: convert fib6_ref to refcount_t
We suspect some issues involving fib6_ref 0 -> 1 transitions might
cause strange syzbot reports.

Lets convert fib6_ref to refcount_t to catch them earlier.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:19:48 -07:00
Eric Dumazet
5ea715289a ipv6: broadly use fib6_info_hold() helper
Instead of using atomic_inc(), prefer fib6_info_hold()
so that upcoming refcount_t conversion is simpler.

Only fib6_info_alloc() is using atomic_set() since we
just allocated a new object.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:19:48 -07:00
Eric Dumazet
b027055022 ipv6: fib6_info_destroy_rcu() cleanup
We do not need to clear f6i->rt6i_exception_bucket right before
freeing f6i.

Note that f6i->rt6i_exception_bucket is properly protected by
f6i->exception_bucket_flushed being set to one in rt6_flush_exceptions()
under the protection of rt6_exception_lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:19:48 -07:00
Dave Airlie
8d8f6f7044 drm-misc-next for v5.2:
UAPI Changes:
 - Document which feature flags belong to which command in virtio_gpu.h
 - Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
 
 Cross-subsystem Changes:
 - Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
 - Add parameters to the device tree bindings for tfp410
 - iommu/io-pgtable: Add ARM Mali midgard MMU page table format
 - dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
 - Use the 64-bits compare for dma-fence-chains
 
 Core Changes:
 - Make the fb conversion functions use __iomem dst.
 - Rename drm_client_add to drm_client_register
 - Move intel_fb_initial_config to core.
 - Add a drm_gem_objects_lookup helper
 - Add drm_gem_fence_array helpers, and use it in lima.
 - Add drm_format_helper.c to kerneldoc.
 
 Driver Changes:
 - Add panfrost driver for mali midgard/bitfrost.
 - Converts bochs to use the simple display type.
 - Small fixes to sun4i, tinydrm, ti-fp410.
 - Fid aspeed's Kconfig options.
 - Make some symbols/functions static in lima, sun4i and meson.
 - Add a driver for the lg,acx467akm-7 panel.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAly4N1oACgkQ/lWMcqZw
 E8OJNQ//fk8+8TkupJTiBYjsAIbo4pRrWa29zQFhiqEhG2kpDESr1YjkeN3uQ+wg
 R6laOUt1jMNiV/BRBUlsv95cbZ0eda3mDPyFOqni8qBoUf0o4NMgLhuLK6qPeMyN
 76u/VZCwYl1AZGiyi33xMABWZ0WmRkwaGxG8gDW/pGU2klRX6T7XgZPDnXrX/jJC
 xq9QUWsOKoBVXX6OtYQPiL6WslbHh97sPzzs5dljJuLOWIug6xFWarUYK6vPnzU1
 HVNcu2/oS6VMCRAW+Ocf4dlcfIN7PvKL984AOcZH3SLB5qabhbjB14e10RivJGZx
 O2yhqNsdF42HcvA08EnwzNvtNS9Rj/GNuw95KHEU+pKZGZ6dQo/fFivm2DoeOqub
 piQlTjVqrHhpNhKg+h8Bd5jUQjx97TPy+PjFtjvCZznZpp8SK8T12yrN+MK4W1ml
 vzMYSaMWiUYNbdixSQH0L90i555uMQgOXh53mKNEovPkh1SKlcsMbONuJIEphpne
 jOT89O9AhtwGu4179cTHRPWpsDcWw/Uoji5wcWZkjeBWdwjwXDGXiIHePN1KAcw9
 qBERJs+yVujgmAvjnJwbe78QlYB1+wgtPdvWAGR0gmu31J1WVL1ADMLFe0YQ5RIz
 huXetCYJzYzv8PxWAPUkky/vUFq4EZQkEQFzGQPtrZje5sH2mko=
 =7Hyr
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2019-04-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.2:

UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.

Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains

Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.

Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
2019-04-24 10:12:50 +10:00
David S. Miller
20eb08b2b0 mlx5-updates-2019-04-22
This series includes updates to mlx5e driver RX data path and some
 significant XDP RX/TX improvements to overcome/mitigate HW and PCIE
 bottlenecks.
 
 From Tariq:
 1) Some Enhancements in rq->flags
 2) Stabilize RX packet rate (on Striding RQ) with
 multiple outstanding UMR posts
 In this patch, we add support for multiple outstanding UMR posts,
  to allow faster gap closure between consuming MPWQEs and reposting
 them back into the WQ.
 
 Performance test:
 As expected, huge improvement in large-scale (48 cores).
 
 xdp_redirect_map, 64B UDP multi-stream.
 Redirect from ConnectX-5 100Gbps to ConnectX-6 100Gbps.
 CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz.
 
 Before: Unstable, 7 to 30 Mpps
 After:  Stable,   at 70.5 Mpps
 
 From Shay:
 3) XDP, Inline small packets into the TX MPWQE in XDP xmit flow
 
 Upon high packet rate with multiple CPUs TX workloads, much of the HCA's
 resources are spent on prefetching TX descriptors, thus affecting
 transmission rates.
 This patch comes to mitigate this problem by moving some workload to the
 CPU and reducing the HW data prefetch overhead for small packets (<= 256B).
 
 When forwarding packets with XDP, a packet that is smaller
 than a certain size (set to ~256 bytes) would be sent inline within
 its WQE TX descrptor (mem-copied), when the hardware tx queue is congested
 beyond a pre-defined water-mark.
 
 Performance:
     Tested packet rate for UDP 64Byte multi-stream
     over two dual port ConnectX-5 100Gbps NICs.
     CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
 
     * Tested with hyper-threading disabled
 
     XDP_TX:
 
     |          | before | after   |       |
     | 24 rings | 51Mpps | 116Mpps | +126% |
     | 1 ring   | 12Mpps | 12Mpps  | same  |
 
     XDP_REDIRECT:
 
     ** Below is the transmit rate, not the redirection rate
     which might be larger, and is not affected by this patch.
 
     |          | before  | after   |      |
     | 32 rings | 64Mpps  | 92Mpps  | +43% |
     | 1 ring   | 6.4Mpps | 6.4Mpps | same |
 
 As we can see, feature significantly improves scaling, without
 hurting single ring performance.
 
 From Maxim:
 4) Some trivial refactoring and code improvements prior to a larger series
 to support AF_XDP.
 
 -Saeed.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcv2LjAAoJEEg/ir3gV/o+90gIAI8+4lwkXZAVk4mxf9PMjxuB
 bQiKd80e++26sgrNHCyuWZnIzTQqYAnUJ3WRC+Kk1pFTo1O23A+fvweT8m1dqAvP
 Z/5ktfbAeF3fwOVu7aGu9vh4zJEWJj8oO+I+G+OaOe2iV7FVTTFnWHxiiCfungAW
 oUnXozq4vERSQLechqqgz6nACxOPgEOCJrp4T9lDYSbqZizHgFttmInMQguq/7KS
 LvITcNu3EF5l4y2LxwCFiKRgGc2y/belU63AK+2pQUXhH46kQPEHdncdLg5d9QYA
 xJwthn697qxS0PIP5oHPHNVN+qJXfuUHVonXqVOAJebGQnV82of6+sPweRxwh1s=
 =MfAR
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2019-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2019-04-22

This series includes updates to mlx5e driver RX data path and some
significant XDP RX/TX improvements to overcome/mitigate HW and PCIE
bottlenecks.

From Tariq:
1) Some Enhancements in rq->flags
2) Stabilize RX packet rate (on Striding RQ) with
multiple outstanding UMR posts
In this patch, we add support for multiple outstanding UMR posts,
 to allow faster gap closure between consuming MPWQEs and reposting
them back into the WQ.

Performance test:
As expected, huge improvement in large-scale (48 cores).

xdp_redirect_map, 64B UDP multi-stream.
Redirect from ConnectX-5 100Gbps to ConnectX-6 100Gbps.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz.

Before: Unstable, 7 to 30 Mpps
After:  Stable,   at 70.5 Mpps

From Shay:
3) XDP, Inline small packets into the TX MPWQE in XDP xmit flow

Upon high packet rate with multiple CPUs TX workloads, much of the HCA's
resources are spent on prefetching TX descriptors, thus affecting
transmission rates.
This patch comes to mitigate this problem by moving some workload to the
CPU and reducing the HW data prefetch overhead for small packets (<= 256B).

When forwarding packets with XDP, a packet that is smaller
than a certain size (set to ~256 bytes) would be sent inline within
its WQE TX descrptor (mem-copied), when the hardware tx queue is congested
beyond a pre-defined water-mark.

Performance:
    Tested packet rate for UDP 64Byte multi-stream
    over two dual port ConnectX-5 100Gbps NICs.
    CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz

    * Tested with hyper-threading disabled

    XDP_TX:

    |          | before | after   |       |
    | 24 rings | 51Mpps | 116Mpps | +126% |
    | 1 ring   | 12Mpps | 12Mpps  | same  |

    XDP_REDIRECT:

    ** Below is the transmit rate, not the redirection rate
    which might be larger, and is not affected by this patch.

    |          | before  | after   |      |
    | 32 rings | 64Mpps  | 92Mpps  | +43% |
    | 1 ring   | 6.4Mpps | 6.4Mpps | same |

As we can see, feature significantly improves scaling, without
hurting single ring performance.

From Maxim:
4) Some trivial refactoring and code improvements prior to a larger series
to support AF_XDP.
====================

Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23 17:03:40 -07:00
Dave Airlie
b1c4f7fead Merge tag 'drm-intel-next-2019-04-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:

- uAPI "Fixes:" patch for the upcoming kernel 5.1, included here too

  We have an Ack from the media folks (only current user) for this
  late tweak

Cross-subsystem Changes:

- ALSA: hda: Fix racy display power access (Takashi, Chris)

Driver Changes:

- DDI and MIPI-DSI clocks fixes for Icelake (Vandita)
- Fix Icelake frequency change/locking (RPS) (Mika)
- Temporarily disable ppGTT read-only bit on Icelake (Mika)
- Add missing Icelake W/As (Mika)
- Enable 12 deep CSB status FIFO on Icelake (Mika)
- Inherit more Icelake code for Elkhartlake (Bob, Jani)

- Handle catastrophic error on engine reset (Mika)
- Shortcut readiness to reset check (Mika)
- Regression fix for GEM_BUSY causing us to report a mixed uabi-class request as not busy (Chris)
- Revert back to max link rate and lane count on eDP (Jani)
- Fix pipe BPP readout for BXT/GLK DSI (Ville)
- Set DP min_bpp to 8*3 for non-RGB output formats (Ville)
- Enable coarse preemption boundaries for Gen8 (Chris)
- Do not enable FEC without DSC (Ville)
- Restore correct BXT DDI latency optim setting calculation (Ville)
- Always reset context's RING registers to avoid running workload twice during reset (Chris)
- Set GPU wedged on driver unload (Janusz)
- Consolidate two similar barries from timeline into one (Chris)
- Only reset the pinned kernel contexts on resume (Chris)
- Wakeref tracking improvements (Chris, Imre)
- Lockdep fixes for shrinker interactions (Chris)
- Bump ready tasks ahead of busywaits in prep of semaphore use (Chris)

- Huge step in splitting display code into fine grained files (Jani)
- Refactor the IRQ init/reset macros for code saving (Paulo)
- Convert IRQ initialization code to uncore MMIO access (Paulo)
- Convert workarounds code to use uncore MMIO access (Chris)
- Nuke drm_crtc_state and use intel_atomic_state instead (Manasi)
- Update SKL clock-gating WA (Radhakrishna, Ville)
- Isolate GuC reset code flow (Chris)
- Expose force_dsc_enable through debugfs (Manasi)
- Header standalone compile testing framework (Jani)
- Code cleanups to reduce driver footprint (Chris)
- PSR code fixes and cleanups (Jose)
- Sparse and kerneldoc updates (Chris)
- Suppress spurious combo PHY B warning (Vile)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418080426.GA6409@jlahtine-desk.ger.corp.intel.com
2019-04-24 10:02:20 +10:00
Daniel Borkmann
a21b48a2f2 Merge branch 'bpf-proto-fixes'
Willem de Bruijn says:

====================
Expand the tc tunnel encap support with protocols that convert the
network layer protocol, such as 6in4. This is analogous to existing
support in bpf_skb_proto_6_to_4.

Patch 1 implements the straightforward logic
Patch 2 tests it with a 6in4 tunnel

Changes v1->v2
  - improve documentation in test
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-24 01:32:28 +02:00
Willem de Bruijn
f6ad6accaa selftests/bpf: expand test_tc_tunnel with SIT encap
So far, all BPF tc tunnel testcases encapsulate in the same network
protocol. Add an encap testcase that requires updating skb->protocol.

The 6in4 tunnel encapsulates an IPv6 packet inside an IPv4 tunnel.
Verify that bpf_skb_net_grow correctly updates skb->protocol to
select the right protocol handler in __netif_receive_skb_core.

The BPF program should also manually update the link layer header to
encode the right network protocol.

Changes v1->v2
  - improve documentation of non-obvious logic

Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-24 01:32:26 +02:00
Willem de Bruijn
1b00e0dfe7 bpf: update skb->protocol in bpf_skb_net_grow
Some tunnels, like sit, change the network protocol of packet.
If so, update skb->protocol to match the new type.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-24 01:32:26 +02:00
Tycho Andersen
6beff00b79 seccomp: fix up grammar in comment
This sentence is kind of a train wreck anyway, but at least dropping the
extra pronoun helps somewhat.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
2019-04-23 16:21:12 -07:00
Jun Lei
a9a3c0da14 drm/amd/display: add explicit handshake between x86 and DMCU
[why]
When DMCU interrupts x86, it leads to undefined phy programming

[how]
expand dmcu interface to support new PHY lock and unlock commands
if DMCU FW doesn't support these commands, they fail silently so its okay

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:28:19 -05:00
Eric Bernstein
cc602e2b0d drm/amd/display: Allow cursor position when plane_res.ipp is NULL
[Why]
Starting with DCN1, the input_pixel_processor (ipp) struct has been
replaced by dpp struct (part of DAL3.1 SW architecture change).
Need to update logic to handle cases where ipp is never allocated.

[How]
Only skip cursor position programming if both ipp and dpp resources
are NULL.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:28:11 -05:00
Aric Cyr
00ae0af700 drm/amd/display: 3.2.27
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:28:05 -05:00
Anthony Koo
5b7c0d8d2b drm/amd/display: Fix eDP Black screen after S4 resume
[Why]
Power down of PHY on eDP requires us to call eDP power
control to power on again

[How]
1. In the case link rates don't match, disable PHY
requires calling of eDP power control ON after

2. Link disable case limit to eDP path since
this is not really applicable to DP since we do
power down PHY as part of verify link cap

3. Move detection of eDP link settings to be
done even for S4 resume cases where other
dpcd cap read and edid read can be skipped

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:27:58 -05:00
Anthony Koo
abdef75583 drm/amd/display: Send DMCU messages only if FW loaded
[Why]
Some DMCU messages were being sent in cases where
there was no DMCU FW at all, which resulted in some wait
timeouts

[How]
Delay sending some of the DMCU messages after FW
init is called and DMCU is running.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:27:51 -05:00
Wenjing Liu
43e3ac8389 drm/amd/display: Add function to copy DC streams
We'll need the ability to copy a dc_stream_state for some features.
Implement it here.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:27:45 -05:00
Anthony Koo
41629f02c6 drm/amd/display: Allow system to enter stutter on init
[Why]
Workaround was missing in one HW disable path,
meaning when all pipes are power gated, stutter was
not working

[How]
Add workaround for init_hw path for stutter
workaround

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:27:32 -05:00
Leo Li
bb20be7510 drm/amdgpu: Check if SW SMU is supported before accessing funcs
smu.ppt_funcs is only initialized for ASICs supporting SW SMU.

On a Hawaii ASIC, attempting to access the udev attribute
ATTRS{power_dpm_state} will cause a null pointer deref in
amdgpu_get_dpm_state() because of this.

Fix by checking if SW SMU is supported first.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:27:25 -05:00
Leo Li
3b8cea6f64 drm/amd/include: Add HUBPREQ_DEBUG register offsets
They will be used by DC when runing ASIC-specific HUBP initialization.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-23 17:27:08 -05:00
Anson Huang
d386bb9042 i2c: imx: correct the method of getting private data in notifier_call
The way of getting private imx_i2c_struct in i2c_imx_clk_notifier_call()
is incorrect, should use clk_change_nb element to get correct address
and avoid below kernel dump during POST_RATE_CHANGE notify by clk
framework:

Unable to handle kernel paging request at virtual address 03ef1488
pgd = (ptrval)
[03ef1488] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events reduce_bus_freq_handler
PC is at i2c_imx_set_clk+0x10/0xb8
LR is at i2c_imx_clk_notifier_call+0x20/0x28
pc : [<806a893c>]    lr : [<806a8a04>]    psr: a0080013
sp : bf399dd8  ip : bf3432ac  fp : bf7c1dc0
r10: 00000002  r9 : 00000000  r8 : 00000000
r7 : 03ef1480  r6 : bf399e50  r5 : ffffffff  r4 : 00000000
r3 : bf025300  r2 : bf399e50  r1 : 00b71b00  r0 : bf399be8
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 4e03004a  DAC: 00000051
Process kworker/2:1 (pid: 38, stack limit = 0x(ptrval))
Stack: (0xbf399dd8 to 0xbf39a000)
9dc0:                                                       806a89e4 00000000
9de0: ffffffff bf399e50 00000002 806a8a04 806a89e4 80142900 ffffffff 00000000
9e00: bf34ef18 bf34ef04 00000000 ffffffff bf399e50 80142d84 00000000 bf399e6c
9e20: bf34ef00 80f214c4 bf025300 00000002 80f08d08 bf017480 00000000 80142df0
9e40: 00000000 80166ed8 80c27638 8045de58 bf352340 03ef1480 00b71b00 0f82e242
9e60: bf025300 00000002 03ef1480 80f60e5c 00000001 8045edf0 00000002 8045eb08
9e80: bf025300 00000002 03ef1480 8045ee10 03ef1480 8045eb08 bf01be40 00000002
9ea0: 03ef1480 8045ee10 07de2900 8045eb08 bf01b780 00000002 07de2900 8045ee10
9ec0: 80c27898 bf399ee4 bf020a80 00000002 1f78a400 8045ee10 80f60e5c 80460514
9ee0: 80f60e5c bf01b600 bf01b480 80460460 0f82e242 bf383a80 bf383a00 80f60e5c
9f00: 00000000 bf7c1dc0 80f60e70 80460564 80f60df0 80f60d24 80f60df0 8011e72c
9f20: 00000000 80f60df0 80f60e6c bf7c4f00 00000000 8011e7ac bf274000 8013bd84
9f40: bf7c1dd8 80f03d00 bf274000 bf7c1dc0 bf274014 bf7c1dd8 80f03d00 bf398000
9f60: 00000008 8013bfb4 00000000 bf25d100 bf25d0c0 00000000 bf274000 8013bf88
9f80: bf25d11c bf0cfebc 00000000 8014140c bf25d0c0 801412ec 00000000 00000000
9fa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<806a893c>] (i2c_imx_set_clk) from [<806a8a04>] (i2c_imx_clk_notifier_call+0x20/0x28)
[<806a8a04>] (i2c_imx_clk_notifier_call) from [<80142900>] (notifier_call_chain+0x44/0x84)
[<80142900>] (notifier_call_chain) from [<80142d84>] (__srcu_notifier_call_chain+0x44/0x98)
[<80142d84>] (__srcu_notifier_call_chain) from [<80142df0>] (srcu_notifier_call_chain+0x18/0x20)
[<80142df0>] (srcu_notifier_call_chain) from [<8045de58>] (__clk_notify+0x78/0xa4)
[<8045de58>] (__clk_notify) from [<8045edf0>] (__clk_recalc_rates+0x60/0xb4)
[<8045edf0>] (__clk_recalc_rates) from [<8045ee10>] (__clk_recalc_rates+0x80/0xb4)
Code: e92d40f8 e5903298 e59072a0 e1530001 (e5975008)
---[ end trace fc7f5514b97b6cbb ]---

Fixes: 90ad2cbe88 ("i2c: imx: use clk notifier for rate changes")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2019-04-24 00:14:57 +02:00
Charles Keepax
76c547830b clk: lochnagar: Add support for the Cirrus Logic Lochnagar
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.

The Lochnagar can take several input clocks from the host system,
provides several of its own clock sources, and provides extensive
routing options for those clocks to be supplied to the attached
CODEC/Amp device.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-23 14:59:38 -07:00
Charles Keepax
3a02cd6854 clk: lochnagar: Add initial binding documentation
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-23 14:55:44 -07:00
Nick Desaulniers
1e0221374e
mips: vdso: drop unnecessary cc-ldoption
Towards the goal of removing cc-ldoption, it seems that --hash-style=
was added to binutils 2.17.50.0.2 in 2006. The minimal required version
of binutils for the kernel according to
Documentation/process/changes.rst is 2.20.

--build-id was added in 2.18 according to binutils-gdb/ld/NEWS.

Link: https://gcc.gnu.org/ml/gcc/2007-01/msg01141.html
Cc: clang-built-linux@googlegroups.com
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
2019-04-23 14:53:54 -07:00
Alexandru Gagniuc
ba11edc650 PCI/ACPI: Advertise _HPX Type 3 support via _OSC
_OSC now has a way to inform firmware that OS has the capability to
interpret _HPX Type 3 setting records.  This was added by the following
PCI Firmware Specification ECN:

  ECN:  _HPX and PCIe Completion Timeout related _OSC Enhancements
  Date:	September 12, 2018
  Affected Document: PCI Firmware Specification, Rev. 3.2

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23 16:38:16 -05:00
Alexandru Gagniuc
f873c51a15 PCI/ACPI: Implement _HPX Type 3 Setting Record
The _HPX Type 3 Setting Record is intended to be more generic and allow
configuration of settings not possible with Type 2 records.  For example,
firmware could ensure that the completion timeout value is set accordingly
throughout the PCI tree.

Implement support for _HPX Type 3 Setting Records, which were added in the
ACPI 6.3 spec.

Link: https://lore.kernel.org/lkml/20190208162414.3996-4-mr.nuke.me@gmail.com
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23 16:38:09 -05:00
Alexandru Gagniuc
87fcf12e84 PCI/ACPI: Remove the need for 'struct hotplug_params'
We used to first parse all the _HPP and _HPX tables before using the
information to program registers of PCIe devices.  Up through HPX Type 2,
there was only one structure of each type, so we could cheat and store it
on the stack.

With HPX Type 3 we get an arbitrary number of entries, so the above model
doesn't scale that well.  Instead of parsing all tables at once, parse and
program each entry separately.  For _HPP and _HPX Types 0 through 2, this
is functionally equivalent.  The change enables the upcoming _HPX Type 3 to
integrate more easily.

Link: https://lore.kernel.org/lkml/20190208162414.3996-3-mr.nuke.me@gmail.com
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[bhelgaas: fix build errors]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23 16:38:05 -05:00
Alexandru Gagniuc
e77704501c PCI/ACPI: Do not export pci_get_hp_params()
pci_get_hp_params() is only used within drivers/pci, and there is no reason
to make it available outside of the PCI core, so stop exporting it.

Link: https://lore.kernel.org/lkml/20190208162414.3996-2-mr.nuke.me@gmail.com
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23 16:37:58 -05:00
Ray Jui
8221324b1a i2c: iproc: Change driver to use 'BIT' macro
Change the iProc I2C driver to use the 'BIT' macro from all '1 << XXX'
bit operations to get rid of compiler warning and improve readability of
the code

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-04-23 23:36:00 +02:00
Mauro Carvalho Chehab
7358a821f0 docs: gpio: convert docs to ReST and rename to *.rst
The API described at sysfs.txt is deprecated.

Still, as it is still part of the Kernel (and will likely be
there for some time, as we don't simply remove APIs). So,
it makes sense to keep it there.

The conversion of this file is trivial:
  - add blank lines and identation in order to identify paragraphs;
  - mark a literal block as such.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 23:30:07 +02:00