Now that MIB support was registered with FDMI, the driver may receive CT
requests for MIB-related commands. At this time, no command is
supported. However, the driver needs to be graceful and reject the CT
request.
This patch adds identification of the requests as well as sending the
reject response.
Link: https://lore.kernel.org/r/20201020202719.54726-9-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Created new attribute lpfc_enable_mi, which by default is enabled.
Add command definition bits for SLI-4 parameters that recognize whether the
adapter has MIB information support and what revision of MIB data. Using
the adapter information, register vendor-specific MIB support with FDMI.
The registration will be done every link up.
During FDMI registration, encountered a couple of errors when reverting to
FDMI rev1. Code needed to exist once reverting. Fixed these.
Link: https://lore.kernel.org/r/20201020202719.54726-8-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver supports arbitrarily large scatter-gather lists and the current
value for max_sectors is limiting.
Change max_sectors to the largest value. This was actually done prior but
it only corrected one template and that template was later removed.
So change the remaining 2 templates. Other areas which hard-set the sectors
value should be inheriting what is in the template.
Link: https://lore.kernel.org/r/20201020202719.54726-7-james.smart@broadcom.com
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During code reviews duplicate code sections were found to determine the WQ
Create version. The duplication was potentially overriding logic that
validated page size.
Link: https://lore.kernel.org/r/20201020202719.54726-6-james.smart@broadcom.com
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 9816ef6ecb ("scsi: lpfc: Use after free in lpfc_rq_buf_free()")
was made to correct a use after free condition in lpfc_rq_buf_free().
Unfortunately, a subsequent patch cut on a tree without the fix
inadvertently reverted the fix.
Put the fix back: Move the freeing of the rqb_entry to after the print
function that references it.
Link: https://lore.kernel.org/r/20201020202719.54726-4-james.smart@broadcom.com
Fixes: 411de511c6 ("scsi: lpfc: Fix RQ empty firmware trap")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following call trace was seen during HBA reset testing:
BUG: scheduling while atomic: swapper/2/0/0x10000100
...
Call Trace:
dump_stack+0x19/0x1b
__schedule_bug+0x64/0x72
__schedule+0x782/0x840
__cond_resched+0x26/0x30
_cond_resched+0x3a/0x50
mempool_alloc+0xa0/0x170
lpfc_unreg_rpi+0x151/0x630 [lpfc]
lpfc_sli_abts_recover_port+0x171/0x190 [lpfc]
lpfc_sli4_abts_err_handler+0xb2/0x1f0 [lpfc]
lpfc_sli4_io_xri_aborted+0x256/0x300 [lpfc]
lpfc_sli4_sp_handle_abort_xri_wcqe.isra.51+0xa3/0x190 [lpfc]
lpfc_sli4_fp_handle_cqe+0x89/0x4d0 [lpfc]
__lpfc_sli4_process_cq+0xdb/0x2e0 [lpfc]
__lpfc_sli4_hba_process_cq+0x41/0x100 [lpfc]
lpfc_cq_poll_hdler+0x1a/0x30 [lpfc]
irq_poll_softirq+0xc7/0x100
__do_softirq+0xf5/0x280
call_softirq+0x1c/0x30
do_softirq+0x65/0xa0
irq_exit+0x105/0x110
do_IRQ+0x56/0xf0
common_interrupt+0x16a/0x16a
With the conversion to blk_io_poll for better interrupt latency in normal
cases, it introduced this code path, executed when I/O aborts or logouts
are seen, which attempts to allocate memory for a mailbox command to be
issued. The allocation is GFP_KERNEL, thus it could attempt to sleep.
Fix by creating a work element that performs the event handling for the
remote port. This will have the mailbox commands and other items performed
in the work element, not the irq. A much better method as the "irq" routine
does not stall while performing all this deep handling code.
Ensure that allocation failures are handled and send LOGO on failure.
Additionally, enlarge the mailbox memory pool to reduce the possibility of
additional allocation in this path.
Link: https://lore.kernel.org/r/20201020202719.54726-3-james.smart@broadcom.com
Fixes: 317aeb83c9 ("scsi: lpfc: Add blk_io_poll support for latency improvment")
Cc: <stable@vger.kernel.org> # v5.9+
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following calltrace was seen:
BUG: sleeping function called from invalid context at mm/slab.h:494
...
Call Trace:
dump_stack+0x9a/0xf0
___might_sleep.cold.63+0x13d/0x178
slab_pre_alloc_hook+0x6a/0x90
kmem_cache_alloc_trace+0x3a/0x2d0
lpfc_sli4_nvmet_alloc+0x4c/0x280 [lpfc]
lpfc_post_rq_buffer+0x2e7/0xa60 [lpfc]
lpfc_sli4_hba_setup+0x6b4c/0xa4b0 [lpfc]
lpfc_pci_probe_one_s4.isra.15+0x14f8/0x2280 [lpfc]
lpfc_pci_probe_one+0x260/0x2880 [lpfc]
local_pci_probe+0xd4/0x180
work_for_cpu_fn+0x51/0xa0
process_one_work+0x8f0/0x17b0
worker_thread+0x536/0xb50
kthread+0x30c/0x3d0
ret_from_fork+0x3a/0x50
A prior patch introduced a spin_lock_irqsave(hbalock) in the
lpfc_post_rq_buffer() routine. Call trace is seen as the hbalock is held
with interrupts disabled during a GFP_KERNEL allocation in
lpfc_sli4_nvmet_alloc().
Fix by reordering locking so that hbalock not held when calling
sli4_nvmet_alloc() (aka rqb_buf_list()).
Link: https://lore.kernel.org/r/20201020202719.54726-2-james.smart@broadcom.com
Fixes: 411de511c6 ("scsi: lpfc: Fix RQ empty firmware trap")
Cc: <stable@vger.kernel.org> # v4.17+
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Michael Chan says:
====================
bnxt_en: Bug fixes.
These 5 bug fixes are all related to the firmware reset or AER recovery.
2 patches fix the cleanup logic for the workqueue used to handle firmware
reset and recovery. 1 patch ensures that the chip will have the proper
BAR addresses latched after fatal AER recovery. 1 patch fixes the
open path to check for firmware reset abort error. The last one
sends the fw reset command unconditionally to fix the AER reset logic.
====================
Link: https://lore.kernel.org/r/1603685901-17917-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the AER or firmware reset flow, if we are in fatal error state or
if pci_channel_offline() is true, we don't send any commands to the
firmware because the commands will likely not reach the firmware and
most commands don't matter much because the firmware is likely to be
reset imminently.
However, the HWRM_FUNC_RESET command is different and we should always
attempt to send it. In the AER flow for example, the .slot_reset()
call will trigger this fw command and we need to try to send it to
effect the proper reset.
Fixes: b340dc680e ("bnxt_en: Avoid sending firmware messages when AER error is detected.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a PCIe fatal error occurs, the internal latched BAR addresses
in the chip get reset even though the BAR register values in config
space are retained.
pci_restore_state() will not rewrite the BAR addresses if the
BAR address values are valid, causing the chip's internal BAR addresses
to stay invalid. So we need to zero the BAR registers during PCIe fatal
error to force pci_restore_state() to restore the BAR addresses. These
write cycles to the BAR registers will cause the proper BAR addresses to
latch internally.
Fixes: 6316ea6db9 ("bnxt_en: Enable AER support.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of the commit b148bb238c
("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."),
cancel_delayed_work_sync() is called only for VFs to fix a possible
crash by cancelling any pending delayed work items. It was assumed
by mistake that the flush_workqueue() call on the PF would flush
delayed work items as well.
As flush_workqueue() does not cancel the delayed workqueue, extend
the fix for PFs. This fix will avoid the system crash, if there are
any pending delayed work items in fw_reset_task() during driver's
.remove() call.
Unify the workqueue cleanup logic for both PF and VF by calling
cancel_work_sync() and cancel_delayed_work_sync() directly in
bnxt_remove_one().
Fixes: b148bb238c ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent patch has moved the workqueue cleanup logic before
calling unregister_netdev() in bnxt_remove_one(). This caused a
regression because the workqueue can be restarted if the device is
still open. Workqueue cleanup must be done after unregister_netdev().
The workqueue will not restart itself after the device is closed.
Call bnxt_cancel_sp_work() after unregister_netdev() and
call bnxt_dl_fw_reporters_destroy() after that. This fixes the
regession and the original NULL ptr dereference issue.
Fixes: b16939b59c ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nesting macros that use the same local variable names causes
warnings when building with "make W=2":
include/asm-generic/percpu.h:117:14: warning: declaration of '__ret' shadows a previous local [-Wshadow]
include/asm-generic/percpu.h:126:14: warning: declaration of '__ret' shadows a previous local [-Wshadow]
These are fairly harmless, but since the warning comes from
a global header, the warning happens every time the headers
are included, which is fairly annoying.
Rename the variables to avoid shadowing and shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Ido Schimmel says:
====================
mlxsw: Various fixes
This patch set contains various fixes for mlxsw.
Patch #1 ensures that only link modes that are supported by both the
device and the driver are advertised. When a link mode that is not
supported by the driver is negotiated by the device, it will be
presented as an unknown speed by ethtool, causing the bond driver to
wrongly assume that the link is down.
Patch #2 fixes a trivial memory leak upon module removal.
Patch #3 fixes a use-after-free that syzkaller was able to trigger once
on a slow emulator after a few months of fuzzing.
====================
Link: https://lore.kernel.org/r/20201024133733.2107509-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each EMAD transaction stores the skb used to issue the EMAD request
('trans->tx_skb') so that the request could be retried in case of a
timeout. The skb can be freed when a corresponding response is received
or as part of the retry logic (e.g., failed retransmit, exceeded maximum
number of retries).
The two tasks (i.e., response processing and retransmits) are
synchronized by the atomic 'trans->active' field which ensures that
responses to inactive transactions are ignored.
In case of a failed retransmit the transaction is finished and all of
its resources are freed. However, the current code does not mark it as
inactive. Syzkaller was able to hit a race condition in which a
concurrent response is processed while the transaction's resources are
being freed, resulting in a use-after-free [1].
Fix the issue by making sure to mark the transaction as inactive after a
failed retransmit and free its resources only if a concurrent task did
not already do that.
[1]
BUG: KASAN: use-after-free in consume_skb+0x30/0x370
net/core/skbuff.c:833
Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004
CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x250
mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192
instrument_atomic_read include/linux/instrumented.h:56 [inline]
atomic_read include/asm-generic/atomic-instrumented.h:27 [inline]
refcount_read include/linux/refcount.h:147 [inline]
skb_unref include/linux/skbuff.h:1044 [inline]
consume_skb+0x30/0x370 net/core/skbuff.c:833
mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592
mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline]
mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672
mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063
mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
__do_softirq+0x223/0x964 kernel/softirq.c:292
asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711
Allocated by task 1006:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:494 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
slab_post_alloc_hook mm/slab.h:586 [inline]
slab_alloc_node mm/slub.c:2824 [inline]
slab_alloc mm/slub.c:2832 [inline]
kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837
__build_skb+0x21/0x60 net/core/skbuff.c:311
__netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464
netdev_alloc_skb include/linux/skbuff.h:2810 [inline]
mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline]
mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline]
mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817
mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831
mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline]
mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365
mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037
devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765
genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:714 [inline]
genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731
netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470
genl_rcv+0x24/0x40 net/netlink/genetlink.c:742
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0x150/0x190 net/socket.c:671
____sys_sendmsg+0x6d8/0x840 net/socket.c:2359
___sys_sendmsg+0xff/0x170 net/socket.c:2413
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2446
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 73:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
kasan_set_free_info mm/kasan/common.c:316 [inline]
__kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
slab_free_hook mm/slub.c:1474 [inline]
slab_free_freelist_hook mm/slub.c:1507 [inline]
slab_free mm/slub.c:3072 [inline]
kmem_cache_free+0xbe/0x380 mm/slub.c:3088
kfree_skbmem net/core/skbuff.c:622 [inline]
kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616
__kfree_skb net/core/skbuff.c:679 [inline]
consume_skb net/core/skbuff.c:837 [inline]
consume_skb+0xe1/0x370 net/core/skbuff.c:831
mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592
mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613
mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293
The buggy address belongs to the object at ffff88804f5703c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 212 bytes inside of
224-byte region [ffff88804f5703c0, ffff88804f5704a0)
The buggy address belongs to the page:
page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0
flags: 0x100000000000200(slab)
raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
Fixes: caf7297e7a ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During port creation the driver instructs the device to advertise all
the supported link modes queried from the device.
Since cited commit not all the link modes supported by the device are
supported by the driver. This can result in the device negotiating a
link mode that is not recognized by the driver causing ethtool to show
an unsupported speed:
$ ethtool swp1
...
Speed: Unknown!
This is especially problematic when the netdev is enslaved to a bond, as
the bond driver uses unknown speed as an indication that the link is
down:
[13048.900895] net_ratelimit: 86 callbacks suppressed
[13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex
[13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex
Fix this by making sure that only link modes that are supported by both
the device and the driver are advertised.
Fixes: b97cd89126 ("mlxsw: Remove 56G speed support")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 12d16b397c ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 12d16b397c ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Karsten Graul says:
====================
net/smc: fixes 2020-10-23
Patch 1 fixes a potential null pointer dereference. Patch 2 takes care
of a suppressed return code and patch 3 corrects the system EID in the
ISM driver.
====================
Link: https://lore.kernel.org/r/20201023184830.59548-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The system EID that is defined by the ISM driver is not correct. Using
an incorrect system EID allows to communicate with remote Linux systems
that use the same incorrect system EID, but when it comes to
interoperability with other operating systems then the system EIDs do
never match which prevents SMC-Dv2 communication.
Using the correct system EID fixes this problem.
Fixes: 201091ebb2 ("net/smc: introduce System Enterprise ID (SEID)")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The patch that repaired the invalid return code in smcd_new_buf_create()
missed to take care of errno ENOSPC which has a special meaning that no
more DMBEs can be registered on the device. Fix that by keeping this
errno value during the translation of the return code.
Fixes: 6b1bbf94ab ("net/smc: fix invalid return code in smcd_new_buf_create()")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_listen_work() calls smc_listen_decline() on label out_decl,
providing the ini pointer variable. But this pointer can still be null
when the label out_decl is reached.
Fix this by checking the ini variable in smc_listen_work() and call
smc_listen_decline() with the result directly.
Fixes: a7c9c5f4af ("net/smc: CLC accept / confirm V2")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If SPI is used for periodic polling any sensor, significant delays
sometimes appear. Switching on module clocks during resume lead to delays.
Enabling autosuspend mode causes the controller to not suspend between
SPI transfers and the delays disappear.
The commit also remove unnecessary call to pm_runtime_idle() used
to explicit put device to suspended state. Without pm_runtime_idle() PM
core will put device in the suspended state just after probe() returns.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201019150343.2520-1-akochetkov@lintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
If SPI is used for periodic polling any sensor, significant delays
sometimes appear. Switching on module clocks during resume lead to delays.
Enabling autosuspend mode causes the controller to not suspend between
SPI transfers and the delays disappear.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Link: https://lore.kernel.org/r/20201016085014.31667-1-al.kochet@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During __vsock_create() CAP_NET_ADMIN is used to determine if the
vsock_sock->trusted should be set to true. This value is used later
for determing if a remote connection should be allowed to connect
to a restricted VM. Unfortunately, if the caller doesn't have
CAP_NET_ADMIN, an audit message such as an selinux denial is
generated even if the caller does not want a trusted socket.
Logging errors on success is confusing. To avoid this, switch the
capable(CAP_NET_ADMIN) check to the noaudit version.
Reported-by: Roman Kiryanov <rkir@google.com>
https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit moves the descriptions of the files residing in
tools/memory-model/Documentation to a README file in that directory,
leaving behind the description of tools/memory-model/Documentation/README
itself. After this change, tools/memory-model/Documentation/README
provides a guide to the files in the tools/memory-model/Documentation
directory, guiding people with different skills and needs to the most
appropriate starting point.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a small section to the litmus-tests.txt documentation file for
the Linux Kernel Memory Model explaining that the memory model often
fails to recognize certain control dependencies.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current code sets up the filter action field before
rewrites are set up. When the action 'switch' is used
with rewrites, this may result in initial few packets
that get switched out don't have rewrites applied
on them.
So, make sure filter action is set up along with rewrites
or only after everything else is set up for rewrites.
Fixes: 12b276fbf6 ("cxgb4: add support to create hash filters")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smatch complains that "ret" might be uninitialized if we don't enter
the loop. We do always enter the loop so it's a false positive, but
it's cleaner to just return a literal zero and that silences the
warning as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201023112212.GA282278@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code to try to shut up sparse warnings about questionable locking
didn't shut up sparse: it made the result not parse as valid C at all,
since the end result now has a label with no statement.
The proper fix is to just always lock the hardware, the same way Bart
did in commit 8ae178760b ("scsi: qla2xxx: Simplify the functions for
dumping firmware"). That avoids the whole problem with having locking
that is not statically obvious.
But in the meantime, just remove the incorrect attempt at trying to
avoid a sparse warning that just made things worse.
This was exposed by commit 3e6efab865 ("scsi: qla2xxx: Fix reset of
MPI firmware"), very similarly to how commit cbb01c2f2f ("scsi:
qla2xxx: Fix MPI failure AEN (8200) handling") exposed the same problem
in another place, and caused that commit 8ae178760b.
Please don't add code to just shut up sparse without actually fixing
what sparse complains about.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Arun Easi <aeasi@marvell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A couple of um files ended up not including the header file that defines
the __section() macro, and the simplest fix is to just revert the change
for those files.
Fixes: 33def8498f treewide: Convert macro and uses of __section(foo) to __section("foo")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some drivers (such as EFA) have a GID table, but aren't IB/RoCE devices.
Remove the unnecessary rdma_ib_or_roce() check.
This fixes rdma-core failures for EFA when it uses the new ioctl interface
for querying the GID table.
Fixes: 9f85cbe50a ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/20201026082621.32463-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drivers that need a uverbs AH should instead set the create_user_ah() op
similar to reg_user_mr(). MODIFY_AH and QUERY_AH cmds were never
implemented so are just deleted.
Link: https://lore.kernel.org/r/11-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allowing userspace to invoke these commands is probably going to crash
these drivers as they are not tested and not expecting to use them on a
user object.
For example pvrdma touches cq->ring_state which is not initialized for
user QPs.
These commands are effected:
- IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in
rdma-core, only hfi1, ipath and rxe calls it.
- IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only
ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in
rdma-core, only ipath and hfi1 call them.
- IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in
rdma-core, only ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere
- IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in
rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call
it.
Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No driver sets it, and the core code sets a maximum mask, simply remove
it.
Disabled operations are now handled either by having a NULL ops pointer,
or by having the common driver callbacks check for unsupported extended
attributes.
Link: https://lore.kernel.org/r/9-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the QP attrs create_flags is supported.
Unfortuantely when create_flags was added to the QP attrs the drivers were
not updated. uverbs_ex_cmd_mask was used to block it - even though kernel
drivers use these flags too.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code
to be EOPNOTSUPP.
Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the CQ attrs is supported. Unfortuantely
when flags was added to the CQ attrs the drivers were not updated,
uverbs_ex_cmd_mask was used to block it. This was missed when create CQ
was converted to ioctl, so non-zero flags could have been passed into
drivers.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask.
Fixes: 41b2a71fc8 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file")
Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that it can support the provided attr_mask during
modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block
modify_qp_ex because the driver didn't check RATE_LIMIT.
Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
uverbs was blocking srq_types the driver doesn't support based on the
CREATE_XSRQ cmd_mask. Fix all drivers to check for supported srq_types
during create_srq and move CREATE_XSRQ to the core code.
Link: https://lore.kernel.org/r/5-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions all depend on the driver providing a specific op:
- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace
All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.
Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since a while now the uverbs layer checks if the driver implements a
function before allowing the ucmd to proceed. This largely obsoletes the
cmd_mask stuff, but there is some tricky bits in drivers preventing it
from being removed.
Remove the easy elements of uverbs_ex_cmd_mask by pre-setting them in the
core code. These are triggered soley based on the related ops function
pointer.
query_device_ex is not triggered based on an op, but all drivers already
implement something compatible with the extension, so enable it globally
too.
Link: https://lore.kernel.org/r/2-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
scatter_data_area() and gather_data_area() are not easy to understand since
data is copied in nested loops over sg_list and tcmu dbi list. Since sg
list can contain only partly filled pages, the loop has to be prepared to
handle sg pages not matching dbi pages one by one.
Existing implementation uses kmap_atomic()/kunmap_atomic() due to
performance reasons. But instead of using these calls strictly nested for
sg and dpi pages, the code holds the mappings in an overlapping way, which
indeed is a bug that would trigger on archs using highmem.
The scatterlist lib contains the sg_miter_start/_next/_stop functions which
can be used to simplify such complicated loops.
The new code now processes the dbi list in the outer loop, while sg list is
handled by the inner one. That way the code can take advantage of the
sg_miter_* family calls.
Calling sg_miter_stop() after the end of the inner loop enforces strict
nesting of atomic kmaps.
Since the nested loops in scatter_/gather_data_area were very similar, I
replaced them by the new helper function tcmu_copy_data().
Link: https://lore.kernel.org/r/20201019115118.11949-1-bostroesser@gmail.com
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
