LTO will happily inline __const_udelay() everywhere it is used. Forcing it
noinline saves ~44k text in a LTO build.
13999560 1740864 1499136 17239560 1070e08 vmlinux-with-udelay-inline
13954764 1736768 1499136 17190668 1064f0c vmlinux-wo-udelay-inline
Even without LTO this function should never be inlined.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190330004743.29541-4-andi@firstfloor.org
The "vide" inline assembler is only needed on 32bit kernels for old
32bit only CPUs.
Guard it with an #ifdef so it's not included in 64bit builds.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190330004743.29541-2-andi@firstfloor.org
With gcc toplevel assembler statements that do not mark themselves as .text
may end up in other sections. This causes LTO boot crashes because various
assembler statements ended up in the middle of the initcall section. It's
also a latent problem without LTO, although it's currently not known to
cause any real problems.
According to the gcc team it's expected behavior.
Always mark all the top level assembler statements as text so that they
switch to the right section.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190330004743.29541-1-andi@firstfloor.org
For consistency (and elegance!), add intel_device_info.has_rps.
The immediate boon is that RPS support is now emitted along the other
capabilities in the debug log and after errors.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419134836.5626-1-chris@chris-wilson.co.uk
This patch replaces speakup's implementations with calls to functions
in tty/vt/selection.c. Those functions are:
cancel_selection()
set_selection_kernel()
paste_selection()
Currently setting selection is done in interrupt context. However,
set_selection_kernel() can sleep - for instance, it requires console_lock
which can sleep. Therefore we offload that work to a work_struct thread,
following the same pattern which was already set for paste_selection().
When setting selection, we also get a reference to tty and make sure to
release the reference before returning.
struct speakup_paste_work has been renamed to the more generic
speakup_selection_work because it is now used for both pasting as well
as setting selection. When paste work is cancelled, the code wasn't
setting tty to NULL. This patch also fixes that by setting tty to NULL
so that in case of failure we don't get EBUSY forever.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Gregory Nowak <greg@gregn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch breaks set_selection() into two functions so that when
called from kernel, copy_from_user() can be avoided. The two functions
are called set_selection_user() and set_selection_kernel() in order to
be explicit about their purposes. This also means updating any
references to set_selection() and fixing for name change. It also
exports set_selection_kernel() and paste_selection().
These changes are used the following patch where speakup's selection
functionality calls into the above functions, thereby doing away with
parallel implementation.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Gregory Nowak <greg@gregn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace code of the following form:
sizeof(*resp) + props_count * sizeof(struct gb_power_supply_props_desc)
with:
struct_size(resp, props, props_count)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid typedefs for structure types to maintain kernel coding style.
Remove typedefs for _ODM_Phy_Dbg_Info and _ODM_Mac_Status_Info_.
This part is done by the following semantic patch:
<smpl>
@r1@
identifier i;
type t;
@@
typedef struct i {
...
}t;
@r2@
type r1.t;
identifier v;
@@
t v;
@script:python match@
i << r1.i;
x;
@@
coccinelle.x = i;
@r4@
identifier match.x;
type r1.t;
@@
- typedef struct x
+ struct x
{ ... }
- t
;
@r5@
type r1.t;
identifier r2.v, match.x;
@@
- t v;
+ struct x v;
</smpl>
Change Structure name _ODM_Phy_Dbg_Info and _ODM_Mac_Status_Info_ to maintain Linux kernel Coding Style.
Replace occurences of ODM_PHY_DBG_INFO_T to odm_phy_dbg_info and ODM_MAC_INFO to odm_mac_status_info.
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using writel and readl use regmap API which makes
the driver maintainability easier.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Depending on revision of the chip, 'mt7621_bypass_pipe_rst' function
must be executed. Add better support for this using 'soc_device_match'
in driver probe function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device tree is not using child nodes anymore so the 'child_np' variable
can safely removed. This also simplifies the error path to be able to
directly return errors removing also the 'ret' variable.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver is using 'of_address_to_resource' to get memory resources.
Make use of 'platform_get_resource' instead which is more accurate
for a platform driver. This also makes possible to delete a local
variable which is not needed anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in an RT_TRACE message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two spelling mistake in RT_TRACE messages. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`dt9812_detach()` is the Comedi "detach" handler for the dt9812 driver.
When it is called, the private data for the device is about to be freed.
The private data contains a mutex `devpriv->mut` that was initialized
when the private data was allocated. Call `mutex_destroy()` to mark it
as invalid.
Also remove the calls to `mutex_lock()` and `mutex_unlock()` from
`dt9812_detach()` as the mutex is only being used around a call to
`usb_set_intfdata()` to clear the USB interface's driver data pointer.
The mutex lock seems redundant here, especially as it is about to be
destroyed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`ni6501_detach()` is the Comedi "detach" handler for the ni_usb6501
driver. It is called when the private data for the device is about to
be freed. The private data contains a mutex `devpriv->mut` that was
initialized when the private data was allocated. Call `mutex_destroy()`
to mark it as invalid.
Also remove the calls to `mutex_lock()` and `mutex_unlock()` from
`ni6501_detach()`. The only other locks of the mutex are by some of the
Comedi instruction handlers that cannot contend with the "detach"
handler for this mutex.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`usbdux_detach()` is the Comedi "detach" handler for the usbdux driver.
When it is called, the private data for the device is about to be freed.
The private date contains a mutex `devpriv->mut` that was initialized
when the private data was allocated. Call `mutex_destroy()` to mark it
as invalid.
The calls to `mutex_lock()` and `mutex_unlock()` are probably not
required, especially as the mutex is about to be destroyed, but leave
them alone for now.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`usbduxfast_detach()` is the Comedi "detach" handler for the usbduxfast
driver. When it is called, the private data for the device is about to
be freed. The private date contains a mutex `devpriv->mut` that was
initialized when the private data was allocated. Call `mutex_destroy()`
to mark it as invalid.
The calls to `mutex_lock()` and `mutex_unlock()` in
`usbduxfast_detach()` are probably not required, especially as the mutex
is about to be destroyed, but leave them alone for now.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`usbduxsigma_detach()` is the Comedi "detach" handler for the
usbduxsigma driver. When it is called, the private data for the device
is about to be freed. The private date contains a mutex `devpriv->mut`
that was initialized when the private data was allocated. Call
`mutex_destroy()` to mark it as invalid.
The calls to `mutex_lock()` and `mutex_unlock()` in
`usbduxsigma_detach()` are probably not required, especially as the
mutex is about to be destroyed, but leave them alone for now.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix sparse warning:
drivers/staging/most/configfs.c:34:18: warning:
symbol 'mdev_link_list' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple spelling mistakes in variable names, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kzalloc here was being used without checking the return - if the
kzalloc fails return VCHIQ_ERROR. The call-site of
vchiq_platform_init_state() vchiq_init_state() was not responding
to an allocation failure so checks for != VCHIQ_SUCCESS
and pass VCHIQ_ERROR up to vchiq_platform_init() which then
will fail with -EINVAL.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-By: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are not a lot of functions in the core comedi module that require
the R/W semaphore `attach_lock` in `struct comedi_device` to be locked
(although there are a few functions that require at least one of
`attach_lock` and `mutex` to be locked). One function that requires the
caller to lock `attach_lock` is `comedi_device_detach_cleanup()` so add
a call to `lockdep_assert_held()` to check and document that.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lots of functions in the core comedi module expect the mutex in `struct
comedi_device` to be held, so add calls to `lockdep_assert_held()` to
check and document that. An unusual case is the calls to
`lockdep_assert_held()` after successful return from
`comedi_alloc_board_minor()` which allocates a `struct comedi_device`
and returns with its mutex locked.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_auto_config()` uses `dev->class_dev` for logging a kernel
message after releasing `dev->mutex`. There is an unlikely possibility
that the Comedi device `dev` will have been removed by the
`COMEDI_DEVCONFIG` ioctl() command. Keep hold of the mutex until the
kernel message has been sent to prevent that. The function can call
`comedi_release_hardware_device()` on error. In that case, the mutex
must be unlocked before that.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid kretprobe recursion loop bg by setting a dummy
kprobes to current_kprobe per-CPU variable.
This bug has been introduced with the asm-coded trampoline
code, since previously it used another kprobe for hooking
the function return placeholder (which only has a nop) and
trampoline handler was called from that kprobe.
This revives the old lost kprobe again.
With this fix, we don't see deadlock anymore.
And you can see that all inner-called kretprobe are skipped.
event_1 235 0
event_2 19375 19612
The 1st column is recorded count and the 2nd is missed count.
Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed)
(some difference are here because the counter is racy)
Reported-by: Andrea Righi <righi.andrea@gmail.com>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: c9becf58d9 ("[PATCH] kretprobe: kretprobe-booster")
Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Verify the stack frame pointer on kretprobe trampoline handler,
If the stack frame pointer does not match, it skips the wrong
entry and tries to find correct one.
This can happen if user puts the kretprobe on the function
which can be used in the path of ftrace user-function call.
Such functions should not be probed, so this adds a warning
message that reports which function should be blacklisted.
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/155094059185.6137.15527904013362842072.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use devm_clk_get_optional() to get optional clock instead of
optional_clk_get() which uses devm_clk_get() to get clock and
checks for -EPROBE_DEFER but not -ENOENT as devm_clk_get_optional()
does, in fact, only ignoring -ENOENT will cover more errors, so
the replacement doesn't change original purpose.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver tries to get optional clock, it ignores all errors except
-EPROBE_DEFER, but if only ignores -ENOENT, it will cover some real errors,
such as -ENOMEM, so use devm_clk_get_optional() to get optional clock.
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver tries to get optional clock, it ignores all errors,
but if only ignores -ENOENT, it will cover some real errors, such as
-EPROBE_DEFER, so use devm_clk_get_optional() to get optional clock.
Cc: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver tries to get optional clock, it ignores all errors except
-EPROBE_DEFER, but if only ignores -ENOENT, it will cover some real errors,
such as -ENOMEM, so use devm_clk_get_optional() to get optional clock.
And remove unnecessary stack variable clk.
Cc: Dongjin Kim <tobetter@gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>