Commit graph

982,081 commits

Author SHA1 Message Date
Baoquan He
ec3937107a x86/mm/KASLR: Fix the size of the direct mapping section
kernel_randomize_memory() uses __PHYSICAL_MASK_SHIFT to calculate
the maximum amount of system RAM supported. The size of the direct
mapping section is obtained from the smaller one of the below two
values:

  (actual system RAM size + padding size) vs (max system RAM size supported)

This calculation is wrong since commit

  b83ce5ee91 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52").

In it, __PHYSICAL_MASK_SHIFT was changed to be 52, regardless of whether
the kernel is using 4-level or 5-level page tables. Thus, it will always
use 4 PB as the maximum amount of system RAM, even in 4-level paging
mode where it should actually be 64 TB.

Thus, the size of the direct mapping section will always
be the sum of the actual system RAM size plus the padding size.

Even when the amount of system RAM is 64 TB, the following layout will
still be used. Obviously KALSR will be weakened significantly.

   |____|_______actual RAM_______|_padding_|______the rest_______|
   0            64TB                                            ~120TB

Instead, it should be like this:

   |____|_______actual RAM_______|_________the rest______________|
   0            64TB                                            ~120TB

The size of padding region is controlled by
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING, which is 10 TB by default.

The above issue only exists when
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING is set to a non-zero value,
which is the case when CONFIG_MEMORY_HOTPLUG is enabled. Otherwise,
using __PHYSICAL_MASK_SHIFT doesn't affect KASLR.

Fix it by replacing __PHYSICAL_MASK_SHIFT with MAX_PHYSMEM_BITS.

 [ bp: Massage commit message. ]

Fixes: b83ce5ee91 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Garnier <thgarnie@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: frank.ramsay@hpe.com
Cc: herbert@gondor.apana.org.au
Cc: kirill@shutemov.name
Cc: mike.travis@hpe.com
Cc: thgarnie@google.com
Cc: x86-ml <x86@kernel.org>
Cc: yamada.masahiro@socionext.com
Link: https://lkml.kernel.org/r/20190417083536.GE7065@MiWiFi-R3L-srv
2019-04-18 10:42:58 +02:00
Vicente Bergas
b8f9d7f37b drm/rockchip: shutdown drm subsystem on shutdown
As explained by Robin Murphy:
> the IOMMU shutdown disables paging, so if the VOP is still
> scanning out then that will result in whatever IOVAs it was using now going
> straight out onto the bus as physical addresses.

We had a more radical approach before in commit
7f3ef5dedb ("drm/rockchip: Allow driver to be shutdown on reboot/kexec")
but that resulted in new warnings and oopses on shutdown on rk3399
chromeos devices.

So second try is resurrecting Vicentes shutdown change which should
achieve the same result but in a less drastic way.

Fixes: 63238173b2 ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"")
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Suggested-by: JeffyChen <jeffy.chen@rock-chips.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
[adapted commit message to explain the history]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.de
2019-04-18 10:28:30 +02:00
Mika Westerberg
c4630d6ae6 thunderbolt: Start firmware on Titan Ridge Apple systems
Titan Ridge flow to start the firmware is the same as Alpine Ridge so we
can do the same on Titan Ridge based Apple systems.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:54 +03:00
Mika Westerberg
6755156abc thunderbolt: Reword output of tb_dump_hop()
While tb_dump_hop() prints out necessary information it is in format
that is quite hard to read from the logs especially when one needs to
follow the path to see that the setup is correct.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:54 +03:00
Mika Westerberg
62efe699a7 thunderbolt: Make rest of the logging to happen at debug level
Now that the driver can handle every possible tunnel types there is no
point to log everything as info level so turn these to happen at debug
level instead.

While at it remove duplicated tunnel activation log message
(tb_tunnel_activate() calls tb_tunnel_restart() which print the same
message) and add one missing '\n' termination.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
b323a98f9b thunderbolt: Make __TB_[SW|PORT]_PRINT take const parameters
The printing macros do not modify the passed object so make them
const. While there make tb_route() to take const parameter as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
7ea4cd6b20 thunderbolt: Add support for XDomain connections
Two domains (hosts) can be connected through a Thunderbolt cable and in
that case they can start software services such as networking over the
high-speed DMA paths. Now that we have all the basic building blocks in
place to create DMA tunnels over the Thunderbolt fabric we can add this
support to the software connection manager as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
444ac38448 thunderbolt: Make tb_switch_alloc() return ERR_PTR()
In order to detect possible connections to other domains we need to be
able to find out why tb_switch_alloc() fails so make it return ERR_PTR()
instead. This allows the caller to differentiate between errors such as
-ENOMEM which comes from the kernel and for instance -EIO which comes
from the hardware when trying to access the possible switch.

Convert all the current call sites to handle this properly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
44242d6c97 thunderbolt: Add support for DMA tunnels
In addition to PCIe and Display Port tunnels it is also possible to
create tunnels that forward DMA traffic from the host interface adapter
(NHI) to a NULL port that is connected to another domain through a
Thunderbolt cable. These tunnels can be used to carry software messages
such as networking packets.

To support this we introduce another tunnel type (TB_TUNNEL_DMA) that
supports paths from NHI to NULL port and back.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
3b4b3235ca thunderbolt: Add XDomain UUID exchange support
Currently ICM has been handling XDomain UUID exchange so there was no
need to have it in the driver yet. However, since now we are going to
add the same capabilities to the software connection manager it needs to
be handled properly.

For this reason modify the driver XDomain protocol handling so that if
the remote domain UUID is not filled in the core will query it first and
only then start the normal property exchange flow.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
559c1e1e01 thunderbolt: Run tb_xdp_handle_request() in system workqueue
We run all XDomain requests during discovery in tb->wq and since it only
runs one work at the time it means that sending back reply to the other
domain may be delayed too much depending whether there is an active
XDomain discovery request running.

To make sure we can send reply to the other domain as soon as possible
run tb_xdp_handle_request() in system workqueue instead. Since the
device can be hot-removed in the middle we need to make sure the domain
structure is still around when the function is run so increase reference
count before we schedule the reply work.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
ab9f31cfa8 thunderbolt: Do not tear down tunnels when driver is unloaded
Now that we have capability to discover existing tunnels during driver
load there is no point tearing down tunnels when the driver gets
unloaded. Instead we can just leave them running. If user disconnects
devices while there is no Thunderbolt driver loaded, tunneled protocol
hotplug happens and is handled by the corresponding driver (pciehp in
case of PCIe tunnel, GFX driver in case of DP tunnel).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
4f807e47ee thunderbolt: Add support for Display Port tunnels
Display Port tunnels are somewhat more complex than PCIe tunnels as it
requires 3 tunnels (AUX Rx/Tx and Video). In addition we are not
supposed to create the tunnels immediately when a DP OUT is enumerated.
Instead we need to wait until we get hotplug event to that adapter port
or check if the port has HPD set before tunnels can be established. This
adds Display Port tunneling support to the software connection manager.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
c5ee6feb34 thunderbolt: Rework NFC credits handling
NFC (non flow control) credits is actually 20-bit field so update
tb_port_add_nfc_credits() to handle this properly. This allows us to set
NFC credits for Display Port path in subsequent patches.

Also make sure the function does not update the hardware if the
underlying switch is already unplugged.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
e78db6f08b thunderbolt: Generalize port finding routines to support all port types
We will be needing these routines to find Display Port adapters as well
so modify them to take port type as the second parameter.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
344e06430a thunderbolt: Scan only valid NULL adapter ports in hotplug
The only way to expand Thunderbolt topology is through the NULL adapter
ports (typically ports 1, 2, 3 and 4). There is no point handling
Thunderbolt hotplug events on any other port.

Add a helper function (tb_port_is_null()) that can be used to determine
if the port is NULL port, and use it in software connection manager code
when hotplug event is handled.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
99cabbb006 thunderbolt: Add support for full PCIe daisy chains
Currently the software connection manager (tb.c) has only supported
creating a single PCIe tunnel, no PCIe device daisy chaining has been
supported so far. This updates the software connection manager so that
it now can create PCIe tunnels for full chain of six devices.

Because PCIe allows DMA and opens possibility for DMA attacks we change
security level to "user" meaning that PCIe tunneling requires that the
userspace authorizes the devices first. This makes it possible to block
PCIe tunneling completely while still allowing other types of tunnels to
be automatically created.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
0414bec5f3 thunderbolt: Discover preboot PCIe paths the boot firmware established
In Apple Macs the boot firmware (EFI) connects all devices automatically
when the system is started, before it hands over to the OS. Instead of
ignoring we discover all those PCIe tunnels and record them using our
internal structures, just like we do when a device is connected after
the OS is already up.

By doing this we can properly tear down tunnels when devices are
disconnected. Also this allows us to resume the existing tunnels after
system suspend/resume cycle.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
aae9e27f3b thunderbolt: Deactivate all paths before restarting them
State of the connected devices and tunnel configuration is not known
during resume. For example some paths may not be complete anymore if the
user has unplugged the related devices. So instead of marking all paths
as inactive we go ahead and deactivate them explicitly before we restart
them.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
8c7acaaf02 thunderbolt: Extend tunnel creation to more than 2 adjacent switches
Now that we can allocate hop IDs per port on a path, we can take
advantage of this and create tunnels covering longer paths than just
between two adjacent switches. PCIe actually does not need this as it
is typically a daisy chain between two adjacent switches but this way we
do not need to hard-code creation of the tunnel.

While there add name to struct tb_path to make debugging easier, and
update kernel-doc comments.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
fb19fac1d7 thunderbolt: Add helper function to iterate from one port to another
We need to be able to walk from one port to another when we are creating
paths where there are multiple switches between two ports. For this
reason introduce a new function tb_next_port_on_path().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-04-18 11:18:52 +03:00
Mika Westerberg
dfe40ca486 thunderbolt: Assign remote for both ports in case of dual link
Currently the driver only assigns remote port for the primary port if in
case of dual link. This makes things such as walking from one port to
another more complex than necessary because the code needs to change
from secondary to primary port if the path that is established is
created using secondary links.

In order to always assign both remote pointers we need to prevent the
scanning code from following the secondary link. Failing to do that
might cause problems as the same switch may be enumerated twice (or
removed in case of unplug). Handle that properly by introducing a new
function tb_port_has_remote() that returns true only for the primary
port. We also update tb_is_upstream_port() to support both dual link
ports, make it take const port pointer and move it below
tb_upstream_port() to keep similar functions close.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
0b2863ac3c thunderbolt: Add functions for allocating and releasing HopIDs
Each port has a separate path configuration space that is used for
finding the next hop (switch) in the path. HopID is an index to this
configuration space. HopIDs 0 - 7 are reserved by the protocol.

In order to get next available HopID for each direction we provide two
pairs of helper functions that can be used to allocate and release
HopIDs for a given port.

While there remove obsolete TODO comment.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
93f36ade5b thunderbolt: Generalize tunnel creation functionality
To be able to tunnel non-PCIe traffic, separate tunnel functionality
into generic and PCIe specific parts. Rename struct tb_pci_tunnel to
tb_tunnel, and make it hold an array of paths instead of just two.
Update all the tunneling functions to take this structure as parameter.

We also move tb_pci_port_active() to switch.c (and rename it) where we
will be keeping all port and switch related functions.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
1752b9f787 thunderbolt: Rename tunnel_pci to tunnel
In order to tunnel non-PCIe traffic as well rename tunnel_pci.[ch] to
tunnel.[ch] to reflect this fact. No functional changes.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
56183c88f3 thunderbolt: Cache adapter specific capability offset into struct port
The adapter specific capability either is there or not if the port does
not hold an adapter. Instead of always finding it on-demand we read the
offset just once when the port is initialized.

While there we update the struct port documentation to follow kernel-doc
format.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
4944269305 thunderbolt: Properly disable path
We need to wait until all buffers have been drained before the path can
be considered disabled. Do this for every hop in a path.

This adds another bit field to struct tb_regs_hop even if we are trying
to get rid of them but we can clean them up another day.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
5480dfc275 thunderbolt: Set sleep bit when suspending switch
Thunderbolt 2 devices and beyond link controller needs to be notified
when a switch is going to be suspended by setting bit 31 in LC_SX_CTRL
register. Add this functionality to the software connection manager.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
e879a709de thunderbolt: Configure lanes when switch is initialized
Thunderbolt 2 devices and beyond need to have additional bits set in
link controller specific registers. This includes two bits in LC_SX_CTRL
that tell the link controller which lane is connected and whether it is
upstream facing or not.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
a9be55824a thunderbolt: Move LC specific functionality into a separate file
We will be adding more link controller functionality in subsequent
patches and it does not make sense to keep all that in switch.c, so
separate LC functionality into its own file.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
ffd003b2f8 thunderbolt: Add dummy read after port capability list walk on Light Ridge
Light Ridge has an issue where reading the next capability pointer
location in port config space the read data is not cleared. It is fine
to read capabilities each after another so only thing we need to do is
to make sure we issue dummy read after tb_port_find_cap() is finished to
avoid the issue in next read.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
8b0110d9d1 thunderbolt: Enable TMU access when accessing port space on legacy devices
Light Ridge and Eagle Ridge both need to have TMU access enabled before
port space can be fully accessed so make sure it happens on those. This
allows us to get rid of the offset quirk in tb_port_find_cap().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
f0342e757c thunderbolt: Do not allocate switch if depth is greater than 6
Maximum depth in Thunderbolt topology is 6 so make sure it is not
possible to allocate switches that exceed the depth limit.

While at it update tb_switch_alloc() to use upper/lower_32_bits()
following tb_switch_alloc_safe_mode().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
09f11b6c99 thunderbolt: Take domain lock in switch sysfs attribute callbacks
switch_lock was introduced because it allowed serialization of device
authorization requests from userspace without need to take the big
domain lock (tb->lock). This was fine because device authorization with
ICM is just one command that is sent to the firmware. Now that we start
to handle all tunneling in the driver switch_lock is not enough because
we need to walk over the topology to establish paths.

For this reason drop switch_lock from the driver completely in favour of
big domain lock.

There is one complication, though. If userspace is waiting for the lock
in tb_switch_set_authorized(), it keeps the device_del() from removing
the sysfs attribute because it waits for active users to release the
attribute first which leads into following splat:

    INFO: task kworker/u8:3:73 blocked for more than 61 seconds.
          Tainted: G        W         5.1.0-rc1+ #244
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kworker/u8:3    D12976    73      2 0x80000000
    Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
    Call Trace:
     ? __schedule+0x2e5/0x740
     ? _raw_spin_lock_irqsave+0x12/0x40
     ? prepare_to_wait_event+0xc5/0x160
     schedule+0x2d/0x80
     __kernfs_remove.part.17+0x183/0x1f0
     ? finish_wait+0x80/0x80
     kernfs_remove_by_name_ns+0x4a/0x90
     remove_files.isra.1+0x2b/0x60
     sysfs_remove_group+0x38/0x80
     sysfs_remove_groups+0x24/0x40
     device_remove_attrs+0x3d/0x70
     device_del+0x14c/0x360
     device_unregister+0x15/0x50
     tb_switch_remove+0x9e/0x1d0 [thunderbolt]
     tb_handle_hotplug+0x119/0x5a0 [thunderbolt]
     ? process_one_work+0x1b7/0x420
     process_one_work+0x1b7/0x420
     worker_thread+0x37/0x380
     ? _raw_spin_unlock_irqrestore+0xf/0x30
     ? process_one_work+0x420/0x420
     kthread+0x118/0x130
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x35/0x40

We deal this by following what network stack did for some of their
attributes and use mutex_trylock() with restart_syscall(). This makes
userspace release the attribute allowing sysfs attribute removal to
progress before the write is restarted and eventually fail when the
attribute is removed.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
4708384f35 thunderbolt: Block reads and writes if switch is unplugged
If switch is already disconnected there is no point sending it commands
and waiting for timeout. Instead in that case return error immediately.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
8f965efd21 thunderbolt: Drop duplicated get_switch_at_route()
tb_switch_find_by_route() does the same already so use it instead and
remove duplicated get_switch_at_route().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-04-18 11:18:51 +03:00
Mika Westerberg
a336b62769 thunderbolt: Remove unused work field in struct tb_switch
This field is not used anywhere so remove it.

Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
9872760eb7 net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending
The XDomain protocol messages may start as soon as Thunderbolt control
channel is started. This means that if the other host starts sending
ThunderboltIP packets early enough they will be passed to the network
driver which then gets confused because its resume hook is not called
yet.

Fix this by unregistering the ThunderboltIP protocol handler when
suspending and registering it back on resume.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
2019-04-18 11:18:51 +03:00
Christian Borntraeger
13209ad039 KVM: s390: add MSA9 to cpumodel
This enables stfle.155 and adds the subfunctions for KDSA. Bit 155 is
added to the list of facilities that will be enabled when there is no
cpu model involved as MSA9 requires no additional handling from
userspace, e.g. for migration.

Please note that a cpu model enabled user space can and will have the
final decision on the facility bits for a guests.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
2019-04-18 10:14:11 +02:00
Christian Borntraeger
d5cb6ab1e3 KVM: s390: add vector BCD enhancements facility to cpumodel
If vector support is enabled, the vector BCD enhancements facility
might also be enabled.
We can directly forward this facility to the guest if available
and VX is requested by user space.

Please note that user space can and will have the final decision
on the facility bits for a guests.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
2019-04-18 10:14:11 +02:00
Christian Borntraeger
7832e91cd3 KVM: s390: add vector enhancements facility 2 to cpumodel
If vector support is enabled, the vector enhancements facility 2
might also be enabled.
We can directly forward this facility to the guest if available
and VX is requested by user space.

Please note that user space can and will have the final decision
on the facility bits for a guests.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
2019-04-18 10:14:10 +02:00
Eric Farman
58616e6a37 KVM: s390: Fix potential spectre warnings
Fix some warnings from smatch:

arch/s390/kvm/interrupt.c:2310 get_io_adapter() warn: potential spectre issue 'kvm->arch.adapters' [r] (local cap)
arch/s390/kvm/interrupt.c:2341 register_io_adapter() warn: potential spectre issue 'dev->kvm->arch.adapters' [w]

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190417005414.47801-1-farman@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-04-18 10:13:51 +02:00
Julian Wiedmann
6bcf74e2d1 s390/qdio: consolidate index tracking for queue scan
qdio.ko offers a small number of high-level functions to drive the
scanning of a QDIO queue for ready-to-process SBALs:
qdio_get_next_buffers(), __[ti]qdio_inbound_processing() and
__qdio_outbound_processing().

Let each of those functions maintain the 'start' index for their current
scan, and pass it to lower-level helpers as needed. This improves the
code's overall layering, and allows us to eliminate the additional
first_to_kick cursor with a follow-on patch.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-18 10:10:32 +02:00
Julian Wiedmann
5b2ad27052 s390/qdio: limit direct access to first_to_check cursor
Refactor all the low-level helpers to take the first_to_check cursor as
parameter, rather than accessing it directly.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-18 10:10:31 +02:00
Masahiro Yamada
3c454f47e6 x86/build/vdso: Add FORCE to the build rule of %.so
$(call if_changed,...) must have FORCE as a prerequisite.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1554280212-10578-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-18 10:05:34 +02:00
Richard Weinberger
1c14fe2167 mtd: nandsim: switch to exec_op interface
Stop using the legacy interface.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:08 +02:00
Richard Weinberger
74aee14c77 mtd: nandsim: Embed struct nand_chip in struct nandsim
We will need struct nand_controller soon, so more stuff need to
be parts of struct nandsim.
While we are here, rename "nand" to "ns" to use the same naming scheme
everywhere in nandsim.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:08 +02:00
Frieder Schrempf
598dce7068 mtd: rawnand: AMD: Also use the last page for bad block markers
According to the datasheet of some Cypress SLC NANDs, the bad
block markers can be in the first, second or last page of a block.
So let's check all three locations.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:08 +02:00
Frieder Schrempf
7a1894a955 mtd: rawnand: ESMT: Also use the last page for bad block markers
It is known that some ESMT SLC NANDs have been shipped
with the factory bad block markers in the first or last page
of the block, instead of the first or second page. To be on
the safe side, let's check all three locations.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:08 +02:00
Frieder Schrempf
f90da7818b mtd: rawnand: Support bad block markers in first, second or last page
Currently supported bad block marker positions within the block are:
* in first page only
* in last page only
* in first or second page

Some ESMT NANDs are known to have been shipped by the manufacturer
with bad block markers in the first or last page, instead of the
first or second page.

Also the datasheets for Cypress/Spansion/AMD NANDs claim that the
first, second *and* last page needs to be checked.

Therefore we make it possible to set NAND_BBM_FIRSTPAGE,
NAND_BBM_SECONDPAGE and NAND_BBM_LASTPAGE independently in any
combination.

To simplify the code, the logic to evaluate the flags is moved to a
a new function nand_bbm_get_next_page().

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18 08:54:08 +02:00