Commit graph

982,081 commits

Author SHA1 Message Date
Florian Westphal
26f7fe4a5d selftests: netfilter: add ebtables broute test case
ebtables -t broute allows to redirect packets in a way that
they get pushed up the stack, even if the interface is part
of a bridge.

In case of IP packets to non-local address, this means
those IP packets are routed instead of bridged-forwarded, just
as if the bridge would not have existed.

Expected test output is:
PASS: netns connectivity: ns1 and ns2 can reach each other
PASS: ns1/ns2 connectivity with active broute rule
PASS: ns1/ns2 connectivity with active broute rule and bridge forward drop

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-12 01:45:58 +02:00
YueHaibing
fa3c098c2d extcon: axp288: Add a depends on ACPI to the Kconfig entry
As Hans de Goede pointed, using this driver without ACPI
makes little sense, so add ACPI dependency to Kconfig entry
to fix a build error while CONFIG_ACPI is not set.

drivers/extcon/extcon-axp288.c: In function 'axp288_extcon_probe':
drivers/extcon/extcon-axp288.c:363:20: error: dereferencing pointer to incomplete type
    put_device(&adev->dev);

Fixes: 0cf064db94 ("extcon: axp288: Convert to use acpi_dev_get_first_match_dev()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-12 08:23:24 +09:00
Stanislav Fomichev
947e8b595b bpf: explicitly prohibit ctx_{in, out} in non-skb BPF_PROG_TEST_RUN
This should allow us later to extend BPF_PROG_TEST_RUN for non-skb case
and be sure that nobody is erroneously setting ctx_{in,out}.

Fixes: b0b9395d86 ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-12 00:53:00 +02:00
John Johansen
145a0ef21c apparmor: fix blob compression when ns is forced on a policy load
When blob compression is turned on, if the policy namespace is forced
onto a policy load, the policy load will fail as the namespace name
being referenced is inside the compressed policy blob, resulting in
invalid or names that are too long. So duplicate the name before the
blob is compressed.

Fixes: 876dd866c084 ("apparmor: Initial implementation of raw policy blob compression")
Signed-off-by: John Johansen <john.johansen@canonical.com>
2019-04-11 14:56:37 -07:00
John Johansen
fe166a9f28 apparmor: fix missing ZLIB defines
On configs where ZLIB is not already selected we are getting

undefined reference to `zlib_deflateInit2'
undefined reference to `zlib_deflate'
undefined reference to `zlib_deflateEnd'

For now just select the necessary ZLIB configs.

Fixes: 876dd866c084 ("apparmor: Initial implementation of raw policy blob compression")
Signed-off-by: John Johansen <john.johansen@canonical.com>
2019-04-11 14:56:37 -07:00
John Johansen
6a59d9243d apparmor: fix blob compression build failure on ppc
security/apparmor/policy_unpack.c: In function 'deflate_compress':
security/apparmor/policy_unpack.c:1064:4: error: implicit declaration of function 'vfree'; did you mean 'kfree'? [-Werror=implicit-function-declaration]
    vfree(stgbuf);
    ^~~~~
    kfree

Fixes: 876dd866c084 ("apparmor: Initial implementation of raw policy blob compression")
Signed-off-by: John Johansen <john.johansen@canonical.com>
2019-04-11 14:56:37 -07:00
Chris Coulson
63c16c3a76 apparmor: Initial implementation of raw policy blob compression
This adds an initial implementation of raw policy blob compression,
using deflate. Compression level can be controlled via a new sysctl,
"apparmor.rawdata_compression_level", which can be set to a value
between 0 (no compression) and 9 (highest compression).

Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2019-04-11 14:56:29 -07:00
Daniel Borkmann
6b7a21140f tools: add smp_* barrier variants to include infrastructure
Add the definition for smp_rmb(), smp_wmb(), and smp_mb() to the
tools include infrastructure: this patch adds the implementation
for x86-64 and arm64, and have it fall back as currently is for
other archs which do not have it implemented at this point. The
x86-64 one uses lock + add combination for smp_mb() with address
below red zone.

This is on top of 09d62154f6 ("tools, perf: add and use optimized
ring_buffer_{read_head, write_tail} helpers"), which didn't touch
smp_* barrier implementations. Magnus recently rightfully reported
however that the latter on x86-64 still wrongly falls back to sfence,
lfence and mfence respectively, thus fix that for applications under
tools making use of these to avoid such ugly surprises. The main
header under tools (include/asm/barrier.h) will in that case not
select the fallback implementation.

Reported-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-11 14:45:50 -07:00
David S. Miller
78f07adac8 Merge branch 'ipv6-Refactor-nexthop-selection-helpers-during-a-fib-lookup'
David Ahern says:

====================
ipv6: Refactor nexthop selection helpers during a fib lookup

IPv6 has a fib6_nh embedded within each fib6_info and a separate
fib6_info for each path in a multipath route. A side effect is that
a fib6_info is passed all the way down the stack when selecting a path
on a fib lookup. Refactor the fib lookup functions and associated
helper functions to take a fib6_nh when appropriate to enable IPv6
to work with nexthop objects where the fib6_nh is not directly part
of a fib entry.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:07 -07:00
David Ahern
0b34eb0043 ipv6: Refactor __ip6_route_redirect
Move the nexthop evaluation of a fib entry to a helper that can be
leveraged for each fib6_nh in a multipath nexthop object.

In the move, 'continue' statements means the helper returns false
(loop should continue) and 'break' means return true (found the entry
of interest).

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:07 -07:00
David Ahern
0c59d00675 ipv6: Refactor rt6_device_match
Move the device and gateway checks in the fib6_next loop to a helper
that can be called per fib6_nh entry.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:07 -07:00
David Ahern
d83009d462 ipv6: Move fib6_multipath_select down in ip6_pol_route
Move the siblings and fib6_multipath_select after the null entry check
since a null entry can not have siblings.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern
af52a52cba ipv6: Be smarter with null_entry handling in ip6_pol_route_lookup
Clean up the fib6_null_entry handling in ip6_pol_route_lookup.
rt6_device_match can return fib6_null_entry, but fib6_multipath_select
can not. Consolidate the fib6_null_entry handling and on the final
null_entry check set rt and goto out - no need to defer to a second
check after rt6_find_cached_rt.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern
30c15f0338 ipv6: Refactor find_rr_leaf
find_rr_leaf has 3 loops over fib_entries calling find_match. The loops
are very similar with differences in start point and whether the metric
is evaluated:
    1. start at rr_head, no extra loop compare, check fib metric
    2. start at leaf, compare rt against rr_head, check metric
    3. start at cont (potential saved point from earlier loops), no
       extra loop compare, no metric check

Create 1 loop that is called 3 different times. This will make a
later change with multipath nexthop objects much simpler.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern
28679ed104 ipv6: Refactor find_match
find_match primarily needs a fib6_nh (and fib6_flags which it passes
through to rt6_score_route). Move fib6_check_expired up to the call
sites so find_match is only called for relevant entries. Remove the
match argument which is mostly a pass through and use the return
boolean to decide if match gets set in the call sites.

The end result is a helper that can be called per fib6_nh struct
which is needed once fib entries reference nexthop objects that
have more than one fib6_nh.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern
702cea5685 ipv6: Pass fib6_nh and flags to rt6_score_route
rt6_score_route only needs the fib6_flags and nexthop data. Change
it accordingly. Allows re-use later for nexthop based fib6_nh.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern
cc3a86c802 ipv6: Change rt6_probe to take a fib6_nh
rt6_probe sends probes for gateways in a nexthop. As such it really
depends on a fib6_nh, not a fib entry. Move last_probe to fib6_nh and
update rt6_probe to a fib6_nh struct.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern
6e1809a564 ipv6: Remove rt6_check_dev
rt6_check_dev is a simpler helper with only 1 caller. Fold the code
into rt6_score_route.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
David Ahern
1ba9a89517 ipv6: Only call rt6_check_neigh for nexthop with gateway
Change rt6_check_neigh to take a fib6_nh instead of a fib entry.
Move the check on fib_flags and whether the nexthop has a gateway
up to the one caller.

Remove the inline from the definition as well. Not necessary.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:24:06 -07:00
Linus Torvalds
2d06b23581 for-5.1-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlyveOkACgkQxWXV+ddt
 WDvb3g//RTIy+8o1PwPihGT9z0wWaFTxJF9Ea3SDzgMVsOaWzZIM29Q0XCwGyR5s
 xdwJlNrum4eJwcLRuvvZtZ6e9h6vdgmNxi7ULem0r2ik58rvgZf3TQp/t78qMMLo
 Z8Qp/jQPHOOhwGURFsUd2TwCYQ+3yyEhzoObDDQ5OAyeCgneLe2hLNvyMMF7YNkl
 joaWY5iAwDY61UaRxggwx8OI7TkhCA/ZA27zyjc6oomCQglIM/KmdvmjHpiBs0j/
 1Ij4SDmSo9nqGES/SfubW/l3fpg42hoQWBMuI3/WLr3CBKN08wuRe+BKoDmVyoex
 eVTy3+AnBp6KsjyOmN9h5Am+r1lyToJ1ZpsjkKQzo5SRlYC/SA0oFlxhHKygoft6
 tEEJf+hbySiod/ZX0KItS6Myo1xsHsX8LnidAO+7pK0S5e5D59QPXtw6oJIp0JX/
 kAKrng6bX3+7bSrF8h62nKqpFq/NUTjF8zxB6gwMwnrtroU36r8AFE4+bcyX5Z5g
 +JoJcZ9VFsFcA4GCTzYWTYQ2RfCU6Vnbvh4wTLHiR+IDvbkNFxMUE4z5O+fwqhkl
 6nv8G2EgK3ORZS/4mNAjmanB71gPwbovhTQhju8LQGEmlmwBrF1mQ+YhrBlMrMv9
 XspCzNktqzbGj70tMPbPSB2A5H9oi+5Oabzq2MPFUVBkA9ztpSA=
 =fYo9
 -----END PGP SIGNATURE-----

Merge tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

 - fix parsing of compression algorithm when set as a inode property,
   this could end up with eg. 'zst' or 'zli' in the value

 - don't allow trim on a filesystem with unreplayed log, this could
   cause data loss if there are pending updates to the block groups that
   would not be subject to trim after replay

* tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: prop: fix vanished compression property after failed set
  btrfs: prop: fix zstd compression parameter validation
  Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
2019-04-11 14:19:02 -07:00
Anson Huang
fbc5ee9a69 rtc: mxc_v2: use dev_pm_set_wake_irq() to simplify code
With calling dev_pm_set_wake_irq() to set MXC_V2 RTC as wakeup source
for suspend, generic wake irq mechanism will automatically enable
it as wakeup source when suspend, then the suspend/resume callback
which are ONLY for enabling/disabling irq wake can be removed, it
simplifies the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-11 23:18:33 +02:00
Anson Huang
bc0e731fc2 rtc: mxc: use dev_pm_set_wake_irq() to simplify code
With calling dev_pm_set_wake_irq() to set MXC RTC as wakeup source
for suspend, generic wake irq mechanism will automatically enable
it as wakeup source when suspend, then the suspend/resume callback
which are ONLY for enabling/disabling irq wake can be removed, it
simplifies the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-11 23:18:32 +02:00
Andy Shevchenko
862cac15d2 rtc: rx8025: Fix a parameter to %ptR in rx8025_read_alarm()
The commit 1921cab117 ("rtc: rx8025: Switch to use %ptR") converted
the driver to use new %p extension, but actually used wrong type of
the parameter in one case.

Fix a parameter to %ptR in rx8025_read_alarm().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-11 23:18:30 +02:00
YueHaibing
153a9177c1 rtc: sirfsoc: Make sysrtc_regmap_config static
Fix sparse warning:

drivers/rtc/rtc-sirfsoc.c:282:28: warning:
 symbol 'sysrtc_regmap_config' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-11 23:18:27 +02:00
David Ahern
a5f622984a selftests: fib_tests: Fix 'Command line is not complete' errors
A couple of tests are verifying a route has been removed. The helper
expects the prefix as the first part of the expected output. When
checking that a route has been deleted the prefix is empty leading
to an invalid ip command:

  $ ip ro ls match
  Command line is not complete. Try option "help"

Fix by moving the comparison of expected output and output to a new
function that is used by both check_route and check_route6. Use the
new helper for the 2 checks on route removal.

Also, remove the reset of 'set -x' in route_setup which overrides the
user managed setting.

Fixes: d69faad765 ("selftests: fib_tests: Add prefix route tests with metric")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:17:59 -07:00
Jean-Philippe Brucker
9cb30a71ac PCI: OF: Support "external-facing" property
Set the "untrusted" attribute to any PCIe port that has an
"external-facing" device tree property.  Any device downstream of this port
will inherit the attribute and have only the strictest IOMMU protection.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-11 16:17:53 -05:00
Jean-Philippe Brucker
badd9f19f1 dt-bindings: Add "external-facing" PCIe port property
Provide a way for the firmware to tell the OS which devices are external to
the machine and therefore untrusted.  The property can describe for example
Thunderbolt and other user-accessible ports, which should always have the
strongest IOMMU protection.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Grant Likely <grant.likely@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2019-04-11 16:17:40 -05:00
Colin Ian King
62720b12d2 dns: remove redundant zero length namelen check
The zero namelen check is redundant as it has already been checked
for zero at the start of the function.  Remove the redundant check.

Addresses-Coverity: ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 14:01:08 -07:00
YueHaibing
d3706566ae net: netrom: Fix error cleanup path of nr_proto_init
Syzkaller report this:

BUG: unable to handle kernel paging request at fffffbfff830524b
PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0
Oops: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23
Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2
RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4
RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258
RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269
R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250
R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830
FS:  00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 __list_add include/linux/list.h:60 [inline]
 list_add include/linux/list.h:79 [inline]
 proto_register+0x444/0x8f0 net/core/sock.c:3375
 nr_proto_init+0x73/0x4b3 [netrom]
 ? 0xffffffffc1628000
 ? 0xffffffffc1628000
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004
Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan
 bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc]
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: fffffbfff830524b
---[ end trace 039ab24b305c4b19 ]---

If nr_proto_init failed, it may forget to call proto_unregister,
tiggering this issue.This patch rearrange code of nr_proto_init
to avoid such issues.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 13:59:49 -07:00
Dave Airlie
ffb5d6fe14 - core: Make atomic_enable and disable optional for CRTC
- dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration
             improvements for older controller versions
  - omap: a fix for the CEC clock management policy
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXK9aTQAKCRDj7w1vZxhR
 xXKwAP9vwrBuyG0j7nK/uVPEHZYUgb41i9t+dC38wAWDcbb4swEAzGs+VEkqKvSt
 T9dJNxd1lbdYTRTOKkiRT40tuoiR2Q0=
 =NuDF
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

 - core: Make atomic_enable and disable optional for CRTC
 - dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration
            improvements for older controller versions
 - omap: a fix for the CEC clock management policy

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411151658.orm46ccd5zmrw27l@flea
2019-04-12 06:55:25 +10:00
Andy Duan
d7c3a206e6 net: fec: manage ahb clock in runtime pm
Some SOC like i.MX6SX clock have some limits:
- ahb clock should be disabled before ipg.
- ahb and ipg clocks are required for MAC MII bus.
So, move the ahb clock to runtime management together with
ipg clock.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 13:53:28 -07:00
Daniel Borkmann
94c59aab42 Merge branch 'bpf-l2-encap'
Alan Maguire says:

====================
Extend bpf_skb_adjust_room growth to mark inner MAC header so
that L2 encapsulation can be used for tc tunnels.

Patch #1 extends the existing test_tc_tunnel to support UDP
encapsulation; later we want to be able to test MPLS over UDP
and MPLS over GRE encapsulation.

Patch #2 adds the BPF_F_ADJ_ROOM_ENCAP_L2(len) macro, which
allows specification of inner mac length.  Other approaches were
explored prior to taking this approach.  Specifically, I tried
automatically computing the inner mac length on the basis of the
specified flags (so inner maclen for GRE/IPv4 encap is the len_diff
specified to bpf_skb_adjust_room minus GRE + IPv4 header length
for example).  Problem with this is that we don't know for sure
what form of GRE/UDP header we have; is it a full GRE header,
or is it a FOU UDP header or generic UDP encap header? My fear
here was we'd end up with an explosion of flags.  The other approach
tried was to support inner L2 header marking as a separate room
adjustment, i.e. adjust for L3/L4 encap, then call
bpf_skb_adjust_room for L2 encap.  This can be made to work but
because it imposed an order on operations, felt a bit clunky.

Patch #3 syncs tools/ bpf.h.

Patch #4 extends the tests again to support MPLSoverGRE,
MPLSoverUDP, and transparent ethernet bridging (TEB) where
the inner L2 header is an ethernet header.  Testing of BPF
encap against tunnels is done for cases where configuration
of such tunnels is possible (MPLSoverGRE[6], MPLSoverUDP,
gre[6]tap), and skipped otherwise.  Testing of BPF encap/decap
is always carried out.

Changes since v2:
 - updated tools/testing/selftest/bpf/config with FOU/MPLS CONFIG
   variables (patches 1, 4)
 - reduced noise in patch 1 by avoiding unnecessary movement of code
 - eliminated inner_mac variable in bpf_skb_net_grow (patch 2)

Changes since v1:
 - fixed formatting of commit references.
 - BPF_F_ADJ_ROOM_FIXED_GSO flag enabled on all variants (patch 1)
 - fixed fou6 options for UDP encap; checksum errors observed were
   due to the fact fou6 tunnel was not set up with correct ipproto
   options (41 -6).  0 checksums work fine (patch 1)
 - added definitions for mask and shift used in setting L2 length
   (patch 2)
 - allow udp encap with fixed GSO (patch 2)
 - changed "elen" to "l2_len" to be more descriptive (patch 4)
====================

Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11 22:50:58 +02:00
Alan Maguire
3ec61df82b selftests_bpf: add L2 encap to test_tc_tunnel
Update test_tc_tunnel to verify adding inner L2 header
encapsulation (an MPLS label or ethernet header) works.

Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11 22:50:57 +02:00
Alan Maguire
1db04c300a bpf: sync bpf.h to tools/ for BPF_F_ADJ_ROOM_ENCAP_L2
Sync include/uapi/linux/bpf.h with tools/ equivalent to add
BPF_F_ADJ_ROOM_ENCAP_L2(len) macro.

Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11 22:50:57 +02:00
Alan Maguire
58dfc900fa bpf: add layer 2 encap support to bpf_skb_adjust_room
commit 868d523535 ("bpf: add bpf_skb_adjust_room encap flags")
introduced support to bpf_skb_adjust_room for GSO-friendly GRE
and UDP encapsulation.

For GSO to work for skbs, the inner headers (mac and network) need to
be marked.  For L3 encapsulation using bpf_skb_adjust_room, the mac
and network headers are identical.  Here we provide a way of specifying
the inner mac header length for cases where L2 encap is desired.  Such
an approach can support encapsulated ethernet headers, MPLS headers etc.
For example to convert from a packet of form [eth][ip][tcp] to
[eth][ip][udp][inner mac][ip][tcp], something like the following could
be done:

	headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen;

	ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC,
				  BPF_F_ADJ_ROOM_ENCAP_L4_UDP |
				  BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 |
				  BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen));

Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11 22:50:56 +02:00
Alan Maguire
166b5a7f2c selftests_bpf: extend test_tc_tunnel for UDP encap
commit 868d523535 ("bpf: add bpf_skb_adjust_room encap flags")
introduced support to bpf_skb_adjust_room for GSO-friendly GRE
and UDP encapsulation and later introduced associated test_tc_tunnel
tests.  Here those tests are extended to cover UDP encapsulation also.

Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11 22:50:56 +02:00
Jon Maloy
909620ff72 tipc: use standard write_lock & unlock functions when creating node
In the function tipc_node_create() we protect the peer capability field
by using the node rw_lock. However, we access the lock directly instead
of using the dedicated functions for this, as we do everywhere else in
node.c. This cosmetic spot is fixed here.

Fixes: 40999f11ce ("tipc: make link capability update thread safe")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 13:42:35 -07:00
Ville Syrjälä
6fd3134ae3 drm/i915: Do not enable FEC without DSC
Currently we enable FEC even when DSC is no used. While that is
theoretically valid supposedly there isn't much of a benefit from
this. But more importantly we do not account for the FEC link
bandwidth overhead (2.4%) in the non-DSC link bandwidth computations.
So the code may think we have enough bandwidth when we in fact
do not.

Cc: stable@vger.kernel.org
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 240999cf33 ("i915/dp/fec: Add fec_enable to the crtc state.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326144903.6617-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
2019-04-11 23:41:28 +03:00
Paul Cercueil
eaa9558d35 clk: ingenic: jz4725b: Add UDC PHY clock
Add clock for the USB Device Controller PHY.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:41:11 -07:00
Ulf Hansson
e94999688e PM / Domains: Add genpd governor for CPUs
After some preceding changes, PM domains managed by genpd may contain
CPU devices, so idle state residency values should be taken into
account during the state selection process. [The residency value is
the minimum amount of time to be spent by a CPU (or a group of CPUs)
in an idle state in order to save more energy than could be saved
by picking up a shallower idle state.]

For this purpose, add a new genpd governor, pm_domain_cpu_gov, to be
used for selecting idle states of PM domains with CPU devices attached
either directly or through subdomains.

The new governor computes the minimum expected idle duration for all
online CPUs attached to a PM domain and its subdomains.  Next, it
finds the deepest idle state whose target residency is within the
expected idle duration and selects it as the target idle state of
the domain.

It should be noted that the minimum expected idle duration computation
is based on the closest timer event information stored in the per-CPU
variables cpuidle_devices for all of the CPUs in the domain.  That
needs to be revisited in future, as obviously there are other reasons
why a CPU may be woken up from idle.

Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-11 22:41:01 +02:00
Paul Cercueil
93dc07f8b0 dt-bindings: clock: jz4725b-cgu: Add UDC PHY clock
Add macro for the UDC PHY clock of the JZ4725B.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:40:58 -07:00
Marc Gonzalez
c0ee0e43c0 clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998
See similar issue solved by commit 5f2420ed21
("clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998")

Without this patch, PCIe PHY init fails:

qcom-qmp-phy 1c06000.phy: pipe_clk enable failed err=-16
phy phy-1c06000.phy.0: phy init failed --> -16

Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Fixes: b5f5f525c5 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:37:42 -07:00
Bjorn Andersson
892df0191b clk: qcom: Add QCS404 TuringCC
The Turing Clock Controller provides resources related to running the
Turing subsystem.

PM runtime is used to ensure that the associated AHB clock is ticking
while the clock framework is accessing the registers in the Turing clock
controller.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:35:48 -07:00
Bjorn Andersson
360fed4228 clk: qcom: branch: Add AON clock ops
Some clocks can only be turned on by resetting the block containing
them, provide a clock type that allow us to reference these clocks and
have the client drivers enable and "disable" them.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:34:21 -07:00
Bjorn Andersson
5f19c6e936 dt-bindings: clock: Introduce Qualcomm Turing Clock controller
Add devicetree binding for the turing clock controller found in QCS404.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:34:10 -07:00
Bjorn Andersson
8bc7a04bb7 clk: qcom: gcc-qcs404: Add CDSP related clocks and resets
Add the clocks and resets need in order to control the Turing
remoteproc.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:32:20 -07:00
James Liao
dac5d67277 clk: mediatek: Allow changing PLL rate when it is off
Some modules may need to change its clock rate before turn on it.
So changing PLL's rate when it is off should be allowed.
This patch removes PLL enabled check before set rate, so that
PLLs can set new frequency even if they are off.

On MT8173 for example, ARMPLL's enable bit can be controlled by
other HW. That means ARMPLL may be turned on even if we (CPU / SW)
set ARMPLL's enable bit as 0. In this case, SW may want and can
still change ARMPLL's rate by changing its pcw and postdiv settings.
But without this patch, new pcw setting will not be applied because
its enable bit is 0.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Michael Turquette <mturuqette@baylibre.com>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:29:19 -07:00
Weiyi Lu
acddfc2c26 clk: mediatek: Add MT8183 clock support
Add MT8183 clock support, include topckgen, apmixedsys,
infracfg, mcucfg and subsystem clocks.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:29:19 -07:00
Weiyi Lu
23fe31dedb clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data
In previous MediaTek PLL design, it assumes the pcw change control
is always on the CON1 register.
However, the pcw change bit on MT8183 was moved onto CON0 because
the the PCW length of audio PLLs are extended to 32-bit.
Add configurable pcw_chg_reg to set the pcw change control register
address or using the default control register CON1 if without
setting in pll data.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:20:16 -07:00
Weiyi Lu
d90240bc07 clk: mediatek: Add dt-bindings for MT8183 clocks
Add MT8183 clock dt-bindings, include topckgen, apmixedsys,
infracfg, mcucfg and subsystem clocks.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 13:15:39 -07:00