Commit graph

982,081 commits

Author SHA1 Message Date
Ahmad Masri
e4a29bdd8f wil6210: check mid is valid
Check that the mid is valid and that it does not exceed the memory
size allocated to vifs array.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03 15:34:47 +03:00
Maya Erez
044974fbea wil6210: update WIL_MCS_MAX to 15
Update max MCS to 15, which is supported by Talyn-MB.
This will allow collecting statistics on number of RX packets
in higher MCS.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03 15:34:36 +03:00
Maya Erez
f6194f769d wil6210: do not set BIT_USER_SUPPORT_T_POWER_ON_0 in Talyn-MB
In Sparrow, FW might sleep long time due to T_Power_On calculation
in slow clock, so T_Power_On was set to zero to shorten the L1SS
wake-up time.
In Talyn-MB the L1SS wake-up procedure is handled by the PMU (HW),
hence T_Power_On calculation is accurate and should not be forced
to zero.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03 15:34:26 +03:00
Maya Erez
5793fe9d4f wil6210: increase PCP stop command timeout
In case there are connected stations, FW needs to disconnect
them before handling PCP stop. This flow can take several
seconds.
Increasing PCP stop timeout to 5 seconds to allow that.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03 15:34:15 +03:00
Ahmad Masri
a061894587 wil6210: prevent device memory access while in reset or suspend
Accessing some of the memory of the device while the device is
resetting or suspending may cause unexpected error as the HW is still
not in a stable state. Prevent this access to guarantee successful
read/write memory operations.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03 15:34:04 +03:00
Alexei Avshalom Lazar
73a7d1e34d wil6210: align to latest auto generated wmi.h
Align to latest version of the auto generated wmi file
describing the interface with FW.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03 15:33:53 +03:00
Matteo Croce
0f1bf7e398 arm64/vdso: don't leak kernel addresses
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
two obfuscated kernel pointer are printed at every boot:

    vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))

Remove the the print completely, as it's useless without the addresses.

Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-03 13:22:20 +01:00
Jann Horn
89833fab15 x86/fpu: Fix __user annotations
In save_xstate_epilog(), use __user when type-casting userspace
pointers.

In setup_sigcontext() and x32_setup_rt_frame(), cast the userspace
pointers to 'unsigned long __user *' before writing into them. These
pointers are originally '__u32 __user *' or '__u64 __user *', causing
sparse to complain when a userspace pointer is written into them. The
casts are okay because the pointers always point to pointer-sized
values.

Thanks to Luc Van Oostenryck and Al Viro for explaining this to me.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190329214652.258477-3-jannh@google.com
2019-04-03 14:12:40 +02:00
Miles Chen
19d6242ece arm64: setup min_low_pfn
When debugging with CONFIG_PAGE_OWNER, I noticed that the min_low_pfn
on arm64 is always zero and the page owner scanning has to start from zero.
We have to loop a while before we see the first valid pfn.
(see: read_page_owner())

Setup min_low_pfn to save some loops.

Before setting min_low_pfn:

[   21.265602] min_low_pfn=0, *ppos=0
Page allocated via order 0, mask 0x100cca(GFP_HIGHUSER_MOVABLE)
PFN 262144 type Movable Block 512 type Movable Flags 0x8001e
referenced|uptodate|dirty|lru|swapbacked)
prep_new_page+0x13c/0x140
get_page_from_freelist+0x254/0x1068
__alloc_pages_nodemask+0xd4/0xcb8

After setting min_low_pfn:

[   11.025787] min_low_pfn=262144, *ppos=0
Page allocated via order 0, mask 0x100cca(GFP_HIGHUSER_MOVABLE)
PFN 262144 type Movable Block 512 type Movable Flags 0x8001e
referenced|uptodate|dirty|lru|swapbacked)
prep_new_page+0x13c/0x140
get_page_from_freelist+0x254/0x1068
__alloc_pages_nodemask+0xd4/0xcb8
shmem_alloc_page+0x7c/0xa0
shmem_alloc_and_acct_page+0x124/0x1e8
shmem_getpage_gfp.isra.7+0x118/0x878
shmem_write_begin+0x38/0x68

Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-03 13:07:59 +01:00
Andy Shevchenko
10d64c871c pinctrl: cedarfork: Update pin names according to v1.13c
Version 1.13c of pin list has some changes in pin names for
Intel Cedarfork.

Update the driver accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linar.org>
2019-04-03 14:49:47 +03:00
Qian Cai
b1ce45e86b arm64/mm: fix kernel-doc comments
Building a kernel with W=1 generates several warnings due to abuse of
kernel-doc comments:

  | arch/arm64/mm/numa.c:281: warning: Cannot understand  *
  |   on line 281 - I thought it was a doc line

Tidy up the comments to remove the warnings.

Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms.")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-03 12:46:27 +01:00
Dmitry Torokhov
ce856634af HID: input: add mapping for Assistant key
According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-04-03 13:33:25 +02:00
Angus Ainslie (Purism)
7240d7d41f arm64: dts: imx8mq: Change ahb clock for imx8mq
Set ahb clock on sdma1 to get rid of "Timeout waiting for CH0"
on the imx8mq.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-03 17:59:18 +07:00
Angus Ainslie (Purism)
b6c846b954 arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
Fix a typo in the compatible string

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-03 17:58:31 +07:00
Srinath Mannam
ea2df11f72 PCI: iproc: Allow outbound configuration for 32-bit I/O region
The IProc host controller has I/O memory windows allocated in
the AXI memory map that can be used to address PCI I/O memory
space.

Mapping from AXI memory windows to PCI outbound memory windows is
carried out in the host controller through OARR/OMAP registers pairs
that permit to define power of two region size AXI<->PCI mappings, the
smallest of which is 128MB.

Current code enables AXI memory window to PCI outbound memory window
mapping only for AXI windows matching one of the OARR/OMAP window sizes,
that are SoC dependent and the smallest of which is 128MB.

Some SoCs implementing the IProc host controller have a 32-bit AXI
memory window into PCI I/O memory space, eg:

    Base address | Size
-----------------------------
(1) 0x42000000   | 0x2000000
(2) 0x400000000  | 0x80000000

but its size (32MB - (1) above) is smaller than the smallest AXI<->PCI
region size provided by OARR (128MB), so the current driver rejects
mappings for the 32-bit region making the IProc host controller driver
unusable on 32-bit systems.

However, there is no reason why the 32-bit I/O memory window cannot be
enabled by mapping it through an OARR/OMAP region bigger in size (ie
32-bit AXI window size is 32MB but can be mapped using a 128MB OARR/OMAP
region).

Allow outbound window configuration of I/O memory windows that
are smaller in size than the host controller OARR/OMAP region, so
that the 32-bit AXI memory window can actually be enabled,
making the IProc host controller operational on 32-bit systems.

Link: https://lore.kernel.org/linux-pci/1551415936-30174-3-git-send-email-srinath.mannam@broadcom.com/
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
2019-04-03 11:56:46 +01:00
Srinath Mannam
73b9e4d330 PCI: iproc: Add CRS check in config read
The IPROC PCIe host controller implementation returns CFG_RETRY_STATUS
(0xffff0001) data when it receives a CRS completion, regardless of the
address of the read or the CRS Software Visibility Enable bit. As a
workaround the driver retries in software any read that returns
CFG_RETRY_STATUS even though, for reads of registers that are not Vendor
ID, the register value can correspond to CFG_RETRY_STATUS; this
situation would cause a timeout and failure of reading a valid register
value.

IPROC PCIe host controller PAXB v2 has a register to show config read
status flags like SC, UR, CRS and CA. Using this status flag,
an extra check is added to confirm the CRS using status flags before
reissuing a config read, fixing the issue.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
2019-04-03 11:52:38 +01:00
YueHaibing
71b47eaf6f sched/fair: Make sync_entity_load_avg() and remove_entity_load_avg() static
Fix these sparse warnigs:

  kernel/sched/fair.c:3570:6: warning: symbol 'sync_entity_load_avg' was not declared. Should it be static?
  kernel/sched/fair.c:3583:6: warning: symbol 'remove_entity_load_avg' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190320133839.21392-1-yuehaibing@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 12:34:31 +02:00
Joel Fernandes (Google)
7ba7319f9e sched/core: Annotate perf_domain pointer with __rcu
This fixes the following sparse errors in sched/fair.c:

  fair.c:6506:14: error: incompatible types in comparison expression
  fair.c:8642:21: error: incompatible types in comparison expression

Using __rcu will also help sparse catch any future bugs.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ From an RCU perspective. ]
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Cc: kernel-hardening@lists.openwall.com
Cc: kernel-team@android.com
Link: https://lkml.kernel.org/r/20190321003426.160260-5-joel@joelfernandes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 12:34:31 +02:00
Joel Fernandes (Google)
03f4b48eda rcuwait: Annotate task_struct with __rcu
This suppresses sparse error generated due to the recently added
rcu_assign_pointer sparse check.

  percpu-rwsem.c:162:9: sparse: error: incompatible types in comparison expression
  exit.c:316:16: sparse: error: incompatible types in comparison expression

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ From an RCU perspective. ]
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Cc: kernel-hardening@lists.openwall.com
Cc: kernel-team@android.com
Link: https://lkml.kernel.org/r/20190321003426.160260-4-joel@joelfernandes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 12:34:31 +02:00
Joel Fernandes (Google)
994aeb7a93 sched_domain: Annotate RCU pointers properly
The scheduler uses RCU API in various places to access sched_domain
pointers. These cause sparse errors as below.

Many new errors show up because of an annotation check I added to
rcu_assign_pointer(). Let us annotate the pointers correctly which also
will help sparse catch any potential future bugs.

This fixes the following sparse errors:

  rt.c:1681:9: error: incompatible types in comparison expression
  deadline.c:1904:9: error: incompatible types in comparison expression
  core.c:519:9: error: incompatible types in comparison expression
  core.c:1634:17: error: incompatible types in comparison expression
  fair.c:6193:14: error: incompatible types in comparison expression
  fair.c:9883:22: error: incompatible types in comparison expression
  fair.c:9897:9: error: incompatible types in comparison expression
  sched.h:1287:9: error: incompatible types in comparison expression
  topology.c:612:9: error: incompatible types in comparison expression
  topology.c:615:9: error: incompatible types in comparison expression
  sched.h:1300:9: error: incompatible types in comparison expression
  topology.c:618:9: error: incompatible types in comparison expression
  sched.h:1287:9: error: incompatible types in comparison expression
  topology.c:621:9: error: incompatible types in comparison expression
  sched.h:1300:9: error: incompatible types in comparison expression
  topology.c:624:9: error: incompatible types in comparison expression
  topology.c:671:9: error: incompatible types in comparison expression
  stats.c:45:17: error: incompatible types in comparison expression
  fair.c:5998:15: error: incompatible types in comparison expression
  fair.c:5989:15: error: incompatible types in comparison expression
  fair.c:5998:15: error: incompatible types in comparison expression
  fair.c:5989:15: error: incompatible types in comparison expression
  fair.c:6120:19: error: incompatible types in comparison expression
  fair.c:6506:14: error: incompatible types in comparison expression
  fair.c:6515:14: error: incompatible types in comparison expression
  fair.c:6623:9: error: incompatible types in comparison expression
  fair.c:5970:17: error: incompatible types in comparison expression
  fair.c:8642:21: error: incompatible types in comparison expression
  fair.c:9253:9: error: incompatible types in comparison expression
  fair.c:9331:9: error: incompatible types in comparison expression
  fair.c:9519:15: error: incompatible types in comparison expression
  fair.c:9533:14: error: incompatible types in comparison expression
  fair.c:9542:14: error: incompatible types in comparison expression
  fair.c:9567:14: error: incompatible types in comparison expression
  fair.c:9597:14: error: incompatible types in comparison expression
  fair.c:9421:16: error: incompatible types in comparison expression
  fair.c:9421:16: error: incompatible types in comparison expression

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ From an RCU perspective. ]
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Cc: kernel-hardening@lists.openwall.com
Cc: kernel-team@android.com
Link: https://lkml.kernel.org/r/20190321003426.160260-3-joel@joelfernandes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 12:34:31 +02:00
Joel Fernandes (Google)
b10abd0a88 sched/cpufreq: Annotate cpufreq_update_util_data pointer with __rcu
Recently I added an RCU annotation check to rcu_assign_pointer(). All
pointers assigned to RCU protected data are to be annotated with __rcu
inorder to be able to use rcu_assign_pointer() similar to checks in
other RCU APIs.

This resulted in a sparse error:

  kernel//sched/cpufreq.c:41:9: sparse: error: incompatible types in comparison expression (different address spaces)

Fix this by annotating cpufreq_update_util_data pointer with __rcu. This
will also help sparse catch any future RCU misuage bugs.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ From an RCU perspective. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Cc: kernel-hardening@lists.openwall.com
Cc: kernel-team@android.com
Link: https://lkml.kernel.org/r/20190321003426.160260-2-joel@joelfernandes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 12:34:31 +02:00
Alexander Shiyan
8c5dc8d9f1 video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE
and BACKLIGHT_LCD_DEVICE) that do the same job.
The patch removes useless BACKLIGHT_LCD_SUPPORT option
and converts LCD_CLASS_DEVICE into a menu.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-03 11:15:57 +01:00
Christina Quast
4b81dad109 ALSA: doc: my_chip has no element ioport
chip->ioport is dereferenced in two places, but the struct is
defined as follows:

struct mychip {
	struct snd_card *card;
	struct pci_dev *pci;

	unsigned long port;
	int irq;
};

Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-03 11:55:47 +02:00
Tvrtko Ursulin
640cde65b4 drm/i915: Fix uninitialized mask in intel_device_info_subplatform_init
Mask need to be initialized to zero since device id checks may not match.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 805446c834 ("drm/i915: Introduce concept of a sub-platform")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403064407.25646-1-tvrtko.ursulin@linux.intel.com
2019-04-03 10:55:43 +01:00
Richard Sailer
80690a276f ALSA: hda/realtek - Add quirk for Tuxedo XC 1509
This adds a SND_PCI_QUIRK(...) line for the Tuxedo XC 1509.

The Tuxedo XC 1509 and the System76 oryp5 are the same barebone
notebooks manufactured by Clevo. To name the fixups both use after the
actual underlying hardware, this patch also changes System76_orpy5
to clevo_pb51ed in 2 enum symbols and one function name,
matching the other pci_quirk entries which are also named after the
device ODM.

Fixes: 7f665b1c32 ("ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5")
Signed-off-by: Richard Sailer <rs@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-03 11:55:00 +02:00
Kailang Yang
8983eb602a ALSA: hda/realtek - Move to ACT_INIT state
It will be lose Mic JD state when Chrome OS boot and headset was plugged.
Just Implement of reset combo jack JD verb for ACT_PRE_PROBE state.
Intel test result was also failed.
It test passed until changed the initial state to ACT_INIT.
Mic JD will show every time.
This patch also changed the model name as 'alc-chrome-book' for
application of Chrome OS.

Fixes: 10f5b1b85e ("ALSA: hda/realtek - Fixed Headset Mic JD not stable")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-03 11:51:39 +02:00
Jann Horn
a0fe2c6479 linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
Use parentheses around uses of the argument in u64_to_user_ptr() to
ensure that the cast doesn't apply to part of the argument.

There are existing uses of the macro of the form

  u64_to_user_ptr(A + B)

which expands to

  (void __user *)(uintptr_t)A + B

(the cast applies to the first operand of the addition, the addition
is a pointer addition). This happens to still work as intended, the
semantic difference doesn't cause a difference in behavior.

But I want to use u64_to_user_ptr() with a ternary operator in the
argument, like so:

  u64_to_user_ptr(A ? B : C)

This currently doesn't work as intended.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190329214652.258477-1-jannh@google.com
2019-04-03 11:43:49 +02:00
Peter Zijlstra
a1247d06d0 locking/static_key: Fix false positive warnings on concurrent dec/inc
Even though the atomic_dec_and_mutex_lock() in
__static_key_slow_dec_cpuslocked() can never see a negative value in
key->enabled the subsequent sanity check is re-reading key->enabled, which may
have been set to -1 in the meantime by static_key_slow_inc_cpuslocked().

                CPU  A                               CPU B

 __static_key_slow_dec_cpuslocked():          static_key_slow_inc_cpuslocked():
                               # enabled = 1
   atomic_dec_and_mutex_lock()
                               # enabled = 0
                                              atomic_read() == 0
                                              atomic_set(-1)
                               # enabled = -1
   val = atomic_read()
   # Oops - val == -1!

The test case is TCP's clean_acked_data_enable() / clean_acked_data_disable()
as tickled by KTLS (net/ktls).

Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: ard.biesheuvel@linaro.org
Cc: oss-drivers@netronome.com
Cc: pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 11:42:33 +02:00
Andrey Smirnov
87fd3ce28b ARM: dts: imx6qdl: Specify viewport count for PCIE block
i.MX6 comes with 4 viewports, so configure PCIE node accordingly so
that the driver won't assume we only have 2.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-03 16:40:34 +07:00
Lendacky, Thomas
6d3edaae16 x86/perf/amd: Resolve NMI latency issues for active PMCs
On AMD processors, the detection of an overflowed PMC counter in the NMI
handler relies on the current value of the PMC. So, for example, to check
for overflow on a 48-bit counter, bit 47 is checked to see if it is 1 (not
overflowed) or 0 (overflowed).

When the perf NMI handler executes it does not know in advance which PMC
counters have overflowed. As such, the NMI handler will process all active
PMC counters that have overflowed. NMI latency in newer AMD processors can
result in multiple overflowed PMC counters being processed in one NMI and
then a subsequent NMI, that does not appear to be a back-to-back NMI, not
finding any PMC counters that have overflowed. This may appear to be an
unhandled NMI resulting in either a panic or a series of messages,
depending on how the kernel was configured.

To mitigate this issue, add an AMD handle_irq callback function,
amd_pmu_handle_irq(), that will invoke the common x86_pmu_handle_irq()
function and upon return perform some additional processing that will
indicate if the NMI has been handled or would have been handled had an
earlier NMI not handled the overflowed PMC. Using a per-CPU variable, a
minimum value of the number of active PMCs or 2 will be set whenever a
PMC is active. This is used to indicate the possible number of NMIs that
can still occur. The value of 2 is used for when an NMI does not arrive
at the LAPIC in time to be collapsed into an already pending NMI. Each
time the function is called without having handled an overflowed counter,
the per-CPU value is checked. If the value is non-zero, it is decremented
and the NMI indicates that it handled the NMI. If the value is zero, then
the NMI indicates that it did not handle the NMI.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 11:40:32 +02:00
Lendacky, Thomas
914123fa39 x86/perf/amd: Resolve race condition when disabling PMC
On AMD processors, the detection of an overflowed counter in the NMI
handler relies on the current value of the counter. So, for example, to
check for overflow on a 48 bit counter, bit 47 is checked to see if it
is 1 (not overflowed) or 0 (overflowed).

There is currently a race condition present when disabling and then
updating the PMC. Increased NMI latency in newer AMD processors makes this
race condition more pronounced. If the counter value has overflowed, it is
possible to update the PMC value before the NMI handler can run. The
updated PMC value is not an overflowed value, so when the perf NMI handler
does run, it will not find an overflowed counter. This may appear as an
unknown NMI resulting in either a panic or a series of messages, depending
on how the kernel is configured.

To eliminate this race condition, the PMC value must be checked after
disabling the counter. Add an AMD function, amd_pmu_disable_all(), that
will wait for the NMI handler to reset any active and overflowed counter
after calling x86_pmu_disable_all().

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 11:40:32 +02:00
Peter Zijlstra
d7262457e3 perf/x86/intel: Initialize TFA MSR
Stephane reported that the TFA MSR is not initialized by the kernel,
but the TFA bit could set by firmware or as a leftover from a kexec,
which makes the state inconsistent.

Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Nelson DSouza <nelson.dsouza@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: tonyj@suse.com
Link: https://lkml.kernel.org/r/20190321123849.GN6521@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 11:40:32 +02:00
Shaokun Zhang
1279e41d53 perf/headers: Fix stale comment for struct perf_addr_filter
The @inode field has been removed after:

  9511bce9fe ("perf/core: Fix bad use of igrab()")

Update the description.

Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1554274464-5739-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 11:40:02 +02:00
Andrey Smirnov
a8ab3547c7 ARM: dts: imx7d: Specify viewport count for PCIE block
i.MX7D comes with 4 viewports, so configure PCIE node accordingly so
that the driver won't assume we only have 2.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-03 16:39:56 +07:00
Geert Uytterhoeven
5f068190cc ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
Enable the config options needed to access the CFI NOR FLASH on the
APE6EVM board.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-03 11:36:05 +02:00
Geert Uytterhoeven
c8bb03f65c ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
Enable the config options needed to access the CFI NOR FLASH on the
APE6EVM board.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-03 11:35:39 +02:00
Marek Vasut
a7586ad99e ARM: dts: alt: Enable USB support
Add nodes enabling internal PCI controllers to which the internal USB
controllers are connected, add USB PHY node and pinmux nodes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-03 11:30:09 +02:00
Noralf Trønnes
6e3f17ee73 drm/fb-helper: generic: Call drm_client_add() after setup is done
Hotplug can happen while drm_fbdev_generic_setup() is running so move
drm_client_add() call after setup is done to avoid
drm_fbdev_client_hotplug() running in two threads at the same time.

Fixes: 9060d7f493 ("drm/fb-helper: Finish the generic fbdev emulation")
Cc: stable@vger.kernel.org
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401141358.25309-1-noralf@tronnes.org
2019-04-03 11:11:47 +02:00
Greg Kroah-Hartman
44b8ef17c4 staging: media: tegra-vde: add proper SPDX identifiers on file that did not have it.
There was a single file for the tegra-vde driver that did not have SPDX
identifiers on it, so fix that up.  At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.

Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:18 +02:00
Greg Kroah-Hartman
ffe00b0a0e staging: media: imx: add proper SPDX identifiers on files that did not have them.
There were a few files for the imx media drivers that did not have SPDX
identifiers on them, so fix that up.  At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-media@vger.kernel.org
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:18 +02:00
Greg Kroah-Hartman
26855d5ace staging: media: soc_camera: add proper SPDX identifiers on files that did not have them.
There were a few files for the soc_camera drivers that did not have SPDX
identifiers on them, so fix that up.  At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: linux-media@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:18 +02:00
Greg Kroah-Hartman
b20deecfd1 staging: media: zoran: add proper SPDX identifiers on files that did not have them.
There were a few files for the zoran driver that did not have SPDX
identifiers on them, so fix that up.  At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org
Cc: mjpeg-users@lists.sourceforge.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:17 +02:00
Greg Kroah-Hartman
b36bcbe511 staging: rtl8192e: delete license file.
There is no need for yet-another-copy of the gpl to be in the kernel
source tree, especially for just a single driver.  This got added as
part of the import of the driver from when it was a stand-along chunk of
code.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:17 +02:00
Greg Kroah-Hartman
18056f34c3 staging: rtl8192e: add proper SPDX identifiers on files that did not have them.
There were a few files for the rtl8192e driver that did not have SPDX
identifiers on them, so fix that up.  At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:17 +02:00
Greg Kroah-Hartman
53b6f8bc53 staging: ralink-gdma: add proper SPDX identifiers on ralink-gdma file
The ralink-gdma.c driver did not have a SPDX identifier on it, so fix
that up.  At the same time, remove the "free form" text that specified
the license of the file, as that is impossible for any tool to properly
parse.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:17 +02:00
Greg Kroah-Hartman
21baa36d92 staging: rtl8192u: add proper SPDX identifiers on files that did not have them.
There were a few files for the rtl8192u driver that did not have SPDX
identifiers on them, so fix that up.  At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.

Cc: John Whitmore <johnfwhitmore@gmail.com>
Cc: Bhanusree Pola <bhanusreemahesh@gmail.com>
Cc: Sanjana Sanikommu <sanjana99reddy99@gmail.com>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:17 +02:00
Greg Kroah-Hartman
2506abea7f staging: iio: add proper SPDX identifiers to remaining driver files
There are a number of IIO staging drivers that do not have a proper SPDX
identifier on it.  So fix that up and at the same time, remove the "free
form" license text, as that's pretty much impossible for any tool to
parse.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:17 +02:00
Greg Kroah-Hartman
7beaea2945 staging: comedi: quatec_daqp_cs: add proper SPDX identifier to driver
By default all files without license information are under the default
license of the kernel, which is GPL version 2.  Because of this, add the
GPL-2.0 identifier to the quatec_daqp_cs driver which did not have any license
identifiers in it at all.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Brent Baccala <baccala@freesoft.org>
Cc: David A. Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:16 +02:00
Greg Kroah-Hartman
3baad68a97 staging: vc04_services: remove remaining redundant license text
Now that the SPDX tag is in all vc04_services files, that identifies the
license in a specific and legally-defined manner.  So the extra GPL and
BSD text wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the license text.

No copyright headers or other non-license-description text was removed.

Cc: Eric Anholt <eric@anholt.net>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Cc: Aymen Qader <qader.aymen@gmail.com>
Cc: "Tobias Büttner" <tobias.buettner@fau.de>
Cc: Dominic Braun <inf.braun@fau.de>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Alejandro Ismael Silva <silva.alejandro.ismael@gmail.com>
Cc: Phil Elwell <phil@raspberrypi.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:16 +02:00
Greg Kroah-Hartman
371ebdbe1b staging: vc04_services: add proper SPDX identifier for dual licensed files
There are a number of vc04_services files that are dual licensed under
the GPL2 and BSD-3 licenses.  They currently do not have a SPDX
identifier on them, so fix that up and add the proper identifier so that
tools can pick it up easily.

Cc: Eric Anholt <eric@anholt.net>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Cc: Aymen Qader <qader.aymen@gmail.com>
Cc: "Tobias Büttner" <tobias.buettner@fau.de>
Cc: Dominic Braun <inf.braun@fau.de>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Alejandro Ismael Silva <silva.alejandro.ismael@gmail.com>
Cc: Phil Elwell <phil@raspberrypi.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:16 +02:00