Commit graph

982,081 commits

Author SHA1 Message Date
David S. Miller
8d3a3048c3 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2019-03-19

This series contains updates to e100, e1000, e1000e, igb, igc and
ixgbe.

Serhey Popovych fixes the return value for several of our older
drivers for netdev_update_features() to notify of changes applied.

Kai-Heng Feng fixes the WoL setting for system suspend, which should
not set to runtime suspend settings for igb.  Then fixes a power
management issue with e1000e for CNP+ devices.

Colin Ian King fixes whitespace issue (indentation), which helps with
readability.

Sasha provides the remaining changes for igc, including the enabling of
multi-queues to receive.  Added support for displaying and configuring
network flow classification (NFC) via ethtool.  Added additional
statistics and basic counters for igc.  Fixed a typo, so it aligns with
our other drivers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 10:12:03 -07:00
Sylwester Nawrocki
f29eec793d
ASoC: samsung: i2s: Don't use register read to determine slave/master mode
We can simplify the code by caching the CPU DAI master/slave
information rather than reading previously set register bit.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-20 17:10:45 +00:00
Annaliese McDermond
bf31cbfbe2
ASoC: tlv320aic32x4: Break out clock setting into separate function
Break the clock setting logic out from the main hw_params.  It's
rather large and unweildy and makes for a large function.  This
also better enables some of the following changes to the clock
tree access in the driver.

Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-20 17:10:31 +00:00
Paul Cercueil
0f91d24f2c
ASoC: jz4740: Depend on MIPS instead of MACH_JZ4740
Depending on MACH_JZ4740 prevent us from creating a generic kernel that
works on more than one MIPS board. Instead, we just depend on MIPS being
set.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-20 17:05:40 +00:00
Nicolas Le Bayon
0d7350316a i2c: i2c-stm32f7: improve loopback in timing algorithm
This avoids useless loops inside the I2C timing algorithm.
Actually, we support only one possible solution per prescaler value.
So after finding a solution with a prescaler, the algorithm can
switch directly to the next prescaler value.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-20 17:59:05 +01:00
Phil Edworthy
c62ebb3d5f i2c: designware: Add support for an interface clock
The Synopsys I2C Controller has an interface clock, but most SoCs hide
this away. However, on some SoCs you need to explicitly enable the
interface clock in order to access the registers. Therefore, add
support for an optional interface clock.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-20 17:57:18 +01:00
Phil Edworthy
bdfdf4b2ba dt: snps,designware-i2c: Add clock bindings documentation
The driver requires an undocumented clock property, so detail it.
Add documentation for a separate, optional, interface clock.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-20 17:56:55 +01:00
Steffen Klassert
bfc01ddff2 Revert "net: xfrm: Add '_rcu' tag for rcu protected pointer in netns_xfrm"
This reverts commit f10e0010fa.

This commit was just wrong. It caused a lot of
syzbot warnings, so just revert it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-03-20 17:56:13 +01:00
Jarkko Nikula
5cd1c56c42 i2c: i801: Add support for Intel Comet Lake
Add PCI ID for Intel Comet Lake PCH.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-20 17:42:23 +01:00
Ilya Dryomov
9d4a227f6e rbd: drop wait_for_latest_osdmap()
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-20 16:27:40 +01:00
Ilya Dryomov
bb229bbb3b libceph: wait for latest osdmap in ceph_monc_blacklist_add()
Because map updates are distributed lazily, an OSD may not know about
the new blacklist for quite some time after "osd blacklist add" command
is completed.  This makes it possible for a blacklisted but still alive
client to overwrite a post-blacklist update, resulting in data
corruption.

Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using
the post-blacklist epoch for all post-blacklist requests ensures that
all such requests "wait" for the blacklist to come into force on their
respective OSDs.

Cc: stable@vger.kernel.org
Fixes: 6305a3b415 ("libceph: support for blacklisting clients")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-20 16:27:40 +01:00
Ville Syrjälä
8cac9fd9bc drm/i915: Inline skl_update_pipe_wm() into its only caller
skl_update_pipe_wm() is quite pointless now. Just inline it into
skl_compute_wm().

v2: s/skl_build_pipe_wm/skl_update_pipe_wm/ in the commit message (Matt)

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-10-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:16:16 +02:00
Ville Syrjälä
96cb7cde1a drm/i915: Don't pass pipe_wm around so much
{skl,icl}_build_plane_wm() don't need to be passed the pipe_wm, so
don't. And skl_build_pipe_wm() can easily dig it out itself.

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-9-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:16:16 +02:00
Ville Syrjälä
5e6037c88a drm/i915: Move some variables to tighter scope
Clean up skl_allocate_pipe_ddb() a bit by moving the 'wm' variable
to tighter scope. We'll also consitify it where appropriate.

Also initialize plane_alloc/uv_plane_alloc when decrlaring them
rather than later.

v2: Update commit message (Matt)

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-8-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:16:16 +02:00
Ville Syrjälä
a301cb0fca drm/i915: Keep plane watermarks enabled more aggressively
Currently we disable all the watermarks above the selected max
level for every plane. That would mean that the cursor's watermarks
may also get modified when another plane causes the selected
max watermark level to change. That is not so great as we would
like to keep the cursor as indepenedent as possible to avoid
having to throttle it in resposne to other plane activity.

To avoid that let's keep the watermarks enabled even for levels
above the max selected watermark level, iff the plane has enough
ddb for that particular level. This way the cursor's enabled
watermarks only depend on the cursor itself. This is safe because
the hardware will never choose to use a watermark level unless
all enabled planes have also enabled that level.

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-7-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:16:16 +02:00
Ville Syrjälä
10a7e07b68 drm/i915: Make sure cursor has enough ddb for the selected wm level
We use a fixed ddb allocation for the cursor. Now the calculation
actually makes sure we have enough ddb space, but let's double check
anyway.

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-6-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:16:16 +02:00
Ville Syrjälä
df331de3f8 drm/i915: Allocate enough DDB for the cursor
Currently we just assume that 32 or 8 blocks of ddb is sufficient
for the cursor. The 32 might be, but the 8 is certainly not. The
minimum we need is at least what level 0 watermarks need, but that
is a bit restrictive, so instead let's calculate what level 7
would need for a 256x256 cursor. We'll use that to determine the
fixed ddb allocation for the cursor. This way the cursor will never
be responsible for missing out on deeper power saving states.

v2: Loop to make sure this works even if some wm levels are
    totally disabled (latency==0)

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190319160311.23529-1-ville.syrjala@linux.intel.com
2019-03-20 17:16:08 +02:00
Ville Syrjälä
c92558aa41 drm/i915: Extract skl_compute_wm_params()
Extract the meat of skl_compute_plane_wm_params() into a lower
level helper that doesn't depend on the plane state. We'll
reuse this for the cursor ddb allocation calculations.

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:03:27 +02:00
Ville Syrjälä
67155a6996 drm/i915: Don't pass plane state to skl_compute_plane_wm()
skl_compute_plane_wm() doesn't actually need the plane state. While
it would make logically sense to pass it, we shall need to reuse
skl_compute_plane_wm() to compute the minimum ddb allocation for
the cursor before the cursor may be enabled. Thus we can't rely
on the plane state. The alternative would be to duplicate a lot of
the wm calculations for the cursor ddb allocation case, which doens't
appeal to me.

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-3-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:02:58 +02:00
Ville Syrjälä
3cf963cfe3 drm/i915: Accept alloc_size == blocks
If the minimum required ddb space for all the planes equals the
total ddb space available we are allowed to use the relevant
watermark level.

Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2019-03-20 17:01:56 +02:00
Ville Syrjälä
4677faf65f drm/i915: Use HPLLVCO_MOBILE for all PNVs
To allow unsetting .is_mobile for the desktop variant
of PNV fix up the cdclk code to select the mobile HPLLVCO register
for both PNV variants.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-5-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20 17:00:36 +02:00
Ville Syrjälä
f3e3048522 drm/i915: Introduce i915_has_asle()
We want to allow the desktop PNV to not have .is_mobile set. To
that end let's add a small helper to determine if the platform
has the ASLE interrupt (or equivalent). Supposdely both PNV
variants have it.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-4-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20 17:00:19 +02:00
Ville Syrjälä
9e7d569924 drm/i915: Introduce i9xx_has_pps()
Add a small helper to determine if we have the panel power
sequencer or not. We'll make PNV an exceptional case so
that we can unset .is_mobile for the desktop variant.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-3-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20 16:58:59 +02:00
Ville Syrjälä
b7c8093fac drm/i915: Introduce i9xx_has_pfit()
Make the code self-documenting by introducing i9xx_has_pfit().
Also make PNV an exceptional case so that we can unset
.is_mobile for the desktop variant.

v2: s/gen4/gen>=4/ (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319142329.22881-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20 16:58:19 +02:00
Ville Syrjälä
5c22786983 drm/i915: Reorder gen3/4 swizzle detection logic
g33/i964g/g45 are the exceptional cases when it comes to
the swizzle detection. Let's reorder the code to handle
them first and let everything else be handled by the
else branch. This allows us to unset .is_mobile for the
desktop PNV variant (which supposedly must follow the
"mobile" path here).

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-03-20 16:57:00 +02:00
Adam Ford
768b525edb ARM: dts: imx6qdl: Enable fsl,sec-v4.0-pwrkey
The imx6q Technical reference manual shows the interrupt is
available to wake from sleep using the power button. The driver
has been available for quite some time, and other variants of the
i.MX6 have it enabled, so this implements it much like the others.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20 22:52:42 +08:00
Lucas Stach
5252414f7c ARM: dts: imx6: RDU2: manage backlight from panel
Now that the backlight driver is upstream, we can properly manage the
backlight from the panel.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20 22:52:42 +08:00
Lucas Stach
574e852f99 ARM: dts: imx6: RDU2: add switch watchdog device
This adds the i2c device node for the ethernet switch watchdog.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20 22:52:42 +08:00
Kohji Okuno
8f3e2d2c93 ARM: imx6: cpuidle: omit the unnecessary unmask of GINT
In imx6_set_lpm, we only need to unmask GINT when not WAIT_CLOCKED,
so add a check condition.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20 22:35:29 +08:00
Dalit Ben Zoor
a691a1ebb5 habanalabs: set new golden value to tpc clock relaxation
On init or context switch, set TPC clock relaxation counter
register to a golden value.

Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-03-20 16:13:23 +02:00
Peter Hutterer
fd35759ce3 HID: logitech: Handle 0 scroll events for the m560
hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it
gets interpreted as a negative scroll direction event. This can cause scroll
direction resets and thus broken scrolling.

Fixes: 4435ff2f09 ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Cc: stable@vger.kernel.org # v5.0
Reported-and-tested-by: Aimo Metsälä <aimetsal@outlook.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-03-20 14:28:00 +01:00
Matthias Kaehlcke
a75bb4eb9e Revert "kbuild: use -Oz instead of -Os when using clang"
The clang option -Oz enables *aggressive* optimization for size,
which doesn't necessarily result in smaller images, but can have
negative impact on performance. Switch back to the less aggressive
-Os.

This reverts commit 6748cb3c29.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-20 22:27:29 +09:00
Ben Hutchings
8bc0868998 powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is
enabled, and that was the case before commit 4ffe713b75
("powerpc/mm: Increase the max addressable memory to 2PB").

On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now
define it as 46.  That is larger than the real number of physical
address bits, and breaks calculations in zsmalloc:

  mm/zsmalloc.c:130:49: warning: right shift count is negative
    MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
                                                   ^~
  ...
  mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope
    struct size_class *size_class[ZS_SIZE_CLASSES];
                       ^~~~~~~~~~

Fixes: 4ffe713b75 ("powerpc/mm: Increase the max addressable memory to 2PB")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-21 00:16:45 +11:00
Andy Shevchenko
2821fd0c2b lib/test_printf: Switch to bitmap_zalloc()
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.

Link: http://lkml.kernel.org/r/20190304100009.65147-1-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Andrew Morton <akpm@linux-foundation.org>
To: linux@rasmusvillemoes.dk
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-03-20 14:02:47 +01:00
Lin Yi
2908b076f5 USB: serial: mos7720: fix mos_parport refcount imbalance on error path
The write_parport_reg_nonblock() helper takes a reference to the struct
mos_parport, but failed to release it in a couple of error paths after
allocation failures, leading to a memory leak.

Johan said that move the kref_get() and mos_parport assignment to the
end of urbtrack initialisation is a better way, so move it. and
mos_parport do not used until urbtrack initialisation.

Signed-off-by: Lin Yi <teroincn@163.com>
Fixes: b69578df7e ("USB: usbserial: mos7720: add support for parallel port on moschip 7715")
Cc: stable <stable@vger.kernel.org>     # 2.6.35
Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-20 13:58:42 +01:00
Manivannan Sadhasivam
ee4c12f439 arm64: dts: freescale: Enable PCI-E controller for Oxalis board
Enable PCI-E controller for Oxalis board based on NXP/Freescale LS1012a
SoC available as the Mini PCI-E connector on the bottom side.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20 20:58:26 +08:00
Alexandre Belloni
22e7d5148d rtc: sd3078: fix manufacturer name
The proper manufacturer name is Shenzhen whwave.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20 13:10:57 +01:00
Alison Wang
b9eb314ae8 arm64: dts: ls1028a: Add pmu dt nodes
This patch adds pmu dt nodes for LS1028A.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20 19:51:30 +08:00
Marco Felsch
032f85c936 ARM: dts: pfla02: increase phy reset duration
Increase the reset duration to ensure correct phy functionality. The
reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
pfla02: use long enough reset for ethernet phy"):

  Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
  small percentage of modules have 'transmission timeouts' errors like

  barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
  warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
  eth0: 1000Mbps full duplex link detected
  eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout

Cc: Stefan Christ <s.christ@phytec.de>
Cc: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: 3180f95666 ("ARM: dts: Phytec imx6q pfla02 and pbab01 support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20 19:37:10 +08:00
Uwe Kleine-König
9ff06679e1 pwm: sysfs: fix typo "its" -> "it's"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:34:14 +01:00
Vignesh Raghavendra
efc80fb374 pwm: tiehrpwm: Enable compilation for ARCH_K3
K3 devices have the same EHRPWM IP as OMAP SoCs. Enable the driver to be
built for K3 devices. Also, drop reference to AM33xx in help text, as IP
is found on multiple TI SoCs.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:33:51 +01:00
Daniele Ceraolo Spurio
fd79d93985 drm/i915/selftests: add test to verify get/put fw domains
Exercise acquiring and releasing forcewake around register reads. In
order to read a register behind a GT powerwell, we need to instruct that
powerwell to wake up using a forcewake. When we no longer require the GT
powerwell, we tell the GT to release our forcewake. Inside the
forcewake, the register read should work but outside it should just
return garbage, 0 being the most common garbage. Thus we can detect when
we are inside and outside of the forcewake with just a simple register
read, and so can verify that the GT powerwell is released when we say
so.

v2: Picking the right forcewaked register to return 0 outside of
forcewake is an art.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320080052.27273-1-chris@chris-wilson.co.uk
2019-03-20 11:32:13 +00:00
Vignesh Raghavendra
b54d1ed07a dt-bindings: pwm: tiehrpwm: Add TI AM654 SoC specific compatible
Add a new compatible string "ti,am654-ehrpwm" to support EHRPWM IP on
TI AM654 SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:31:45 +01:00
Christoph Vogtländer
b00ef53053 pwm: tiehrpwm: Update shadow register for disabling PWMs
It must be made sure that immediate mode is not already set, when
modifying shadow register value in ehrpwm_pwm_disable(). Otherwise
modifications to the action-qualifier continuous S/W force
register(AQSFRC) will be done in the active register.
This may happen when both channels are being disabled. In this case,
only the first channel state will be recorded as disabled in the shadow
register. Later, when enabling the first channel again, the second
channel would be enabled as well. Setting RLDCSF to zero, first, ensures
that the shadow register is updated as desired.

Fixes: 38dabd91ff ("pwm: tiehrpwm: Fix disabling of output of PWMs")
Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com>
[vigneshr@ti.com: Improve commit message]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:31:07 +01:00
Nathan Chancellor
44481955ea pwm: img: Turn final 'else if' into 'else' in img_pwm_config
When building with -Wsometimes-uninitialized, Clang warns:

drivers/pwm/pwm-img.c:126:13: error: variable 'timebase' is used
uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]

The final else if functions as an else; make that explicit so that Clang
understands that timebase cannot be used uninitialized.

Link: https://github.com/ClangBuiltLinux/linux/issues/400
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:29:22 +01:00
Phong Hoang
347ab94803 pwm: Fix deadlock warning when removing PWM device
This patch fixes deadlock warning if removing PWM device
when CONFIG_PROVE_LOCKING is enabled.

This issue can be reproceduced by the following steps on
the R-Car H3 Salvator-X board if the backlight is disabled:

 # cd /sys/class/pwm/pwmchip0
 # echo 0 > export
 # ls
 device  export  npwm  power  pwm0  subsystem  uevent  unexport
 # cd device/driver
 # ls
 bind  e6e31000.pwm  uevent  unbind
 # echo e6e31000.pwm > unbind

[   87.659974] ======================================================
[   87.666149] WARNING: possible circular locking dependency detected
[   87.672327] 5.0.0 #7 Not tainted
[   87.675549] ------------------------------------------------------
[   87.681723] bash/2986 is trying to acquire lock:
[   87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0
[   87.694528]
[   87.694528] but task is already holding lock:
[   87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c
[   87.707405]
[   87.707405] which lock already depends on the new lock.
[   87.707405]
[   87.715574]
[   87.715574] the existing dependency chain (in reverse order) is:
[   87.723048]
[   87.723048] -> #1 (pwm_lock){+.+.}:
[   87.728017]        __mutex_lock+0x70/0x7e4
[   87.732108]        mutex_lock_nested+0x1c/0x24
[   87.736547]        pwm_request_from_chip.part.6+0x34/0x74
[   87.741940]        pwm_request_from_chip+0x20/0x40
[   87.746725]        export_store+0x6c/0x1f4
[   87.750820]        dev_attr_store+0x18/0x28
[   87.754998]        sysfs_kf_write+0x54/0x64
[   87.759175]        kernfs_fop_write+0xe4/0x1e8
[   87.763615]        __vfs_write+0x40/0x184
[   87.767619]        vfs_write+0xa8/0x19c
[   87.771448]        ksys_write+0x58/0xbc
[   87.775278]        __arm64_sys_write+0x18/0x20
[   87.779721]        el0_svc_common+0xd0/0x124
[   87.783986]        el0_svc_compat_handler+0x1c/0x24
[   87.788858]        el0_svc_compat+0x8/0x18
[   87.792947]
[   87.792947] -> #0 (kn->count#58){++++}:
[   87.798260]        lock_acquire+0xc4/0x22c
[   87.802353]        __kernfs_remove+0x258/0x2c4
[   87.806790]        kernfs_remove_by_name_ns+0x50/0xa0
[   87.811836]        remove_files.isra.1+0x38/0x78
[   87.816447]        sysfs_remove_group+0x48/0x98
[   87.820971]        sysfs_remove_groups+0x34/0x4c
[   87.825583]        device_remove_attrs+0x6c/0x7c
[   87.830197]        device_del+0x11c/0x33c
[   87.834201]        device_unregister+0x14/0x2c
[   87.838638]        pwmchip_sysfs_unexport+0x40/0x4c
[   87.843509]        pwmchip_remove+0xf4/0x13c
[   87.847773]        rcar_pwm_remove+0x28/0x34
[   87.852039]        platform_drv_remove+0x24/0x64
[   87.856651]        device_release_driver_internal+0x18c/0x21c
[   87.862391]        device_release_driver+0x14/0x1c
[   87.867175]        unbind_store+0xe0/0x124
[   87.871265]        drv_attr_store+0x20/0x30
[   87.875442]        sysfs_kf_write+0x54/0x64
[   87.879618]        kernfs_fop_write+0xe4/0x1e8
[   87.884055]        __vfs_write+0x40/0x184
[   87.888057]        vfs_write+0xa8/0x19c
[   87.891887]        ksys_write+0x58/0xbc
[   87.895716]        __arm64_sys_write+0x18/0x20
[   87.900154]        el0_svc_common+0xd0/0x124
[   87.904417]        el0_svc_compat_handler+0x1c/0x24
[   87.909289]        el0_svc_compat+0x8/0x18
[   87.913378]
[   87.913378] other info that might help us debug this:
[   87.913378]
[   87.921374]  Possible unsafe locking scenario:
[   87.921374]
[   87.927286]        CPU0                    CPU1
[   87.931808]        ----                    ----
[   87.936331]   lock(pwm_lock);
[   87.939293]                                lock(kn->count#58);
[   87.945120]                                lock(pwm_lock);
[   87.950599]   lock(kn->count#58);
[   87.953908]
[   87.953908]  *** DEADLOCK ***
[   87.953908]
[   87.959821] 4 locks held by bash/2986:
[   87.963563]  #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c
[   87.971044]  #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8
[   87.978872]  #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c
[   87.988001]  #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c
[   87.995481]
[   87.995481] stack backtrace:
[   87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7
[   88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT)
[   88.012791] Call trace:
[   88.015235]  dump_backtrace+0x0/0x190
[   88.018891]  show_stack+0x14/0x1c
[   88.022204]  dump_stack+0xb0/0xec
[   88.025514]  print_circular_bug.isra.32+0x1d0/0x2e0
[   88.030385]  __lock_acquire+0x1318/0x1864
[   88.034388]  lock_acquire+0xc4/0x22c
[   88.037958]  __kernfs_remove+0x258/0x2c4
[   88.041874]  kernfs_remove_by_name_ns+0x50/0xa0
[   88.046398]  remove_files.isra.1+0x38/0x78
[   88.050487]  sysfs_remove_group+0x48/0x98
[   88.054490]  sysfs_remove_groups+0x34/0x4c
[   88.058580]  device_remove_attrs+0x6c/0x7c
[   88.062671]  device_del+0x11c/0x33c
[   88.066154]  device_unregister+0x14/0x2c
[   88.070070]  pwmchip_sysfs_unexport+0x40/0x4c
[   88.074421]  pwmchip_remove+0xf4/0x13c
[   88.078163]  rcar_pwm_remove+0x28/0x34
[   88.081906]  platform_drv_remove+0x24/0x64
[   88.085996]  device_release_driver_internal+0x18c/0x21c
[   88.091215]  device_release_driver+0x14/0x1c
[   88.095478]  unbind_store+0xe0/0x124
[   88.099048]  drv_attr_store+0x20/0x30
[   88.102704]  sysfs_kf_write+0x54/0x64
[   88.106359]  kernfs_fop_write+0xe4/0x1e8
[   88.110275]  __vfs_write+0x40/0x184
[   88.113757]  vfs_write+0xa8/0x19c
[   88.117065]  ksys_write+0x58/0xbc
[   88.120374]  __arm64_sys_write+0x18/0x20
[   88.124291]  el0_svc_common+0xd0/0x124
[   88.128034]  el0_svc_compat_handler+0x1c/0x24
[   88.132384]  el0_svc_compat+0x8/0x18

The sysfs unexport in pwmchip_remove() is completely asymmetric
to what we do in pwmchip_add_with_polarity() and commit 0733424c9b
("pwm: Unexport children before chip removal") is a strong indication
that this was wrong to begin with. We should just move
pwmchip_sysfs_unexport() where it belongs, which is right after
pwmchip_sysfs_unexport_children(). In that case, we do not need
separate functions anymore either.

We also really want to remove sysfs irrespective of whether or not
the chip will be removed as a result of pwmchip_remove(). We can only
assume that the driver will be gone after that, so we shouldn't leave
any dangling sysfs files around.

This warning disappears if we move pwmchip_sysfs_unexport() to
the top of pwmchip_remove(), pwmchip_sysfs_unexport_children().
That way it is also outside of the pwm_lock section, which indeed
doesn't seem to be needed.

Moving the pwmchip_sysfs_export() call outside of that section also
seems fine and it'd be perfectly symmetric with pwmchip_remove() again.

So, this patch fixes them.

Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
[shimoda: revise the commit log and code]
Fixes: 76abbdde2d ("pwm: Add sysfs interface")
Fixes: 0733424c9b ("pwm: Unexport children before chip removal")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:21:31 +01:00
Noralf Trønnes
a89bfc5d9a tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfers
Buffers passed to spi_sync() must be dma-safe even for tiny buffers since
some SPI controllers use DMA for all transfers.

Example splat with CONFIG_DMA_API_DEBUG enabled:

[   23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d]
[   23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190
[   23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm
[   23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236
[   23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[   23.750620] RIP: 0010:check_for_stack+0xb7/0x190
[   23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54
[   23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286
[   23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006
[   23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450
[   23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0
[   23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c
[   23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001
[   23.750679] FS:  0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690
[   23.750686] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[   23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0
[   23.750696] Call Trace:
[   23.750713]  debug_dma_map_sg+0x100/0x340
[   23.750727]  ? dma_direct_map_sg+0x3b/0xb0
[   23.750739]  spi_map_buf+0x25a/0x300
[   23.750751]  __spi_pump_messages+0x2a4/0x680
[   23.750762]  __spi_sync+0x1dd/0x1f0
[   23.750773]  spi_sync+0x26/0x40
[   23.750790]  mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi]
[   23.750802]  ? spi_finalize_current_transfer+0x10/0x10
[   23.750821]  mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi]

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org
2019-03-20 12:02:41 +01:00
Mauro Carvalho Chehab
b60a5b8dcf media: Kconfig files: use the right help coding style
Checkpatch wants to use 'help' instead of '---help---':

	WARNING: prefer 'help' over '---help---' for new help texts

Let's change it globally at the media subsystem, as otherwise people
would keep using the old way.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-20 06:47:51 -04:00
Sakari Ailus
8a3946cad2 media: v4l2-fwnode: Add a deprecation note in the old ACPI parsing example
This is not how ACPI tables are written. Add a deprecation note and refer
to the proper documentation.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-20 06:37:55 -04:00
Geert Uytterhoeven
15d82d2249 rtc: sh: Fix invalid alarm warning for non-enabled alarm
When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:

    rtc rtc0: invalid alarm value: 2019-03-14T255:255:255

sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled.  __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.

Fix this by returning -1 instead, as this value is handled fine for all
fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-20 11:37:50 +01:00