Commit graph

982,081 commits

Author SHA1 Message Date
Nikita Danilov
6a7f227731 net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic
David noticed the original define was hiding 'err' variable
reference. Thats confusing and counterintuitive.

Andrew noted the whole macro could be replaced with standard readx_poll
kernel macro. This makes code more readable.

Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 16:45:16 -08:00
Igor Russkikh
8006e3730b net: aquantia: fixed instack structure overflow
This is a real stack undercorruption found by kasan build.

The issue did no harm normally because it only overflowed
2 bytes after `bitary` array which on most architectures
were mapped into `err` local.

Fixes: bab6de8fd1 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 16:45:15 -08:00
Nikita Danilov
13b7997a10 net: aquantia: fixed buffer overflow
The overflow is detected by smatch:

drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c: 175
  aq_pci_func_free_irqs() error: buffer overflow 'self->aq_vec' 8 <= 31

In reality msix_entry_mask always restricts number of iterations.
Adding extra condition to make logic clear and smatch happy.

Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 16:45:15 -08:00
Nikita Danilov
ea4854ddbc net: aquantia: added newline at end of file
drivers/net/ethernet/aquantia/atlantic/aq_nic.c: 991:1:
  warning: no newline at end of file

Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 16:45:15 -08:00
Nikita Danilov
ff83dbf21e net: aquantia: fixed memcpy size
Not careful array dereference caused analysis tools
to think there could be memory overflow.

There was actually no corruption because the array is
two dimensional.

drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c: 140
  aq_ethtool_get_strings() error:
    memcpy() '*aq_ethtool_stat_names' too small (32 vs 704)

Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 16:45:15 -08:00
Hangbin Liu
5e1a99eae8 ipv4: Add ICMPv6 support when parse route ipproto
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers.
But for ip -6 route, currently we only support tcp, udp and icmp.

Add ICMPv6 support so we can match ipv6-icmp rules for route lookup.

v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to
rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: eacb9384a3 ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 16:41:27 -08:00
Yonghong Song
b74e21ab7d samples/bpf: silence compiler warning for xdpsock_user.c
Compiling xdpsock_user.c with 4.8.5, I hit the following
compilation warning:
    HOSTCC  samples/bpf/xdpsock_user.o
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c: In function ‘main’:
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:449:6: warning: ‘idx_cq’ may be used unini
  tialized in this function [-Wmaybe-uninitialized]
    u32 idx_cq, idx_fq;
        ^
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:606:7: warning: ‘idx_rx’ may be used unini
  tialized in this function [-Wmaybe-uninitialized]
     u32 idx_rx, idx_tx = 0;
         ^
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:506:6: warning: ‘idx_rx’ may be used unini
  tialized in this function [-Wmaybe-uninitialized]
    u32 idx_rx, idx_fq = 0;

As an example, the code pattern looks like:
    u32 idx_cq;
    ...
    ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
    if (ret) {
      ...
    }
    ... idx_fq ...
The compiler warns since it does not know whether &idx_fq is assigned
or not inside the library function xsk_ring_prod__reserve().

Let us assign an initial value 0 to such auto variables to silence
compiler warning.

Fixes: 248c7f9c0e ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 01:07:10 +01:00
Yonghong Song
a83de90658 selftests/bpf: set unlimited RLIMIT_MEMLOCK for test_sock_fields
This is to avoid permission denied error. A lot of systems
may have a much lower number, e.g., 64KB, for RLIMIT_MEMLOCK,
which may not be sufficient for the test to run successfully.

Fixes: e0b27b3f97 ("bpf: Add test_sock_fields for skb->sk and bpf_tcp_sock")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 01:06:23 +01:00
Sven Van Asbroeck
7cf58b79b3 PCI/PME: Fix possible use-after-free on remove
In remove(), ensure that the PME work cannot run after kfree() is called.
Otherwise, this could result in a use-after-free.

This issue was detected with the help of Coccinelle.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Frederick Lawler <fred@fredlawl.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-01 17:45:27 -06:00
Daniel Borkmann
4269f69bc9 Merge branch 'bpf-doc-improvements'
Andrii Nakryiko says:

====================
A bunch of BPF-related docs typo, wording and formatting fixes.

v1->v2:
- split off non-documentation changes into separate patchset
====================

Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 00:40:05 +01:00
Andrii Nakryiko
46604676c8 docs/bpf: minor casing/punctuation fixes
Fix few casing and punctuation glitches.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 00:40:04 +01:00
Andrii Nakryiko
9ab5305dbe docs/btf: reflow text to fill up to 78 characters
Reflow paragraphs to more fully and evenly fill 78 character lines.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 00:40:04 +01:00
Andrii Nakryiko
5efc529fb4 docs/btf: fix typos, improve wording
Fix various typos, some of the formatting and wording for
Documentation/btf.rst.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 00:40:04 +01:00
Eric Dumazet
4b9113045b bpf: fix u64_stats_init() usage in bpf_prog_alloc()
We need to iterate through all possible cpus.

Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 00:31:36 +01:00
Paul Burton
d1a2930d8a MIPS: eBPF: Fix icache flush end address
The MIPS eBPF JIT calls flush_icache_range() in order to ensure the
icache observes the code that we just wrote. Unfortunately it gets the
end address calculation wrong due to some bad pointer arithmetic.

The struct jit_ctx target field is of type pointer to u32, and as such
adding one to it will increment the address being pointed to by 4 bytes.
Therefore in order to find the address of the end of the code we simply
need to add the number of 4 byte instructions emitted, but we mistakenly
add the number of instructions multiplied by 4. This results in the call
to flush_icache_range() operating on a memory region 4x larger than
intended, which is always wasteful and can cause crashes if we overrun
into an unmapped page.

Fix this by correcting the pointer arithmetic to remove the bogus
multiplication, and use braces to remove the need for a set of brackets
whilst also making it obvious that the target field is a pointer.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 00:04:15 +01:00
Tvrtko Ursulin
4aa909707b drm/i915: Re-arrange execbuf so context is known before engine
Needed for a following patch.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-23-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-03-01 22:25:11 +00:00
Trond Myklebust
3eb86093ea NFSv4.2: Add client support for the generic 'layouterror' RPC call
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
a79f194aa4 NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated
If a layout segment gets invalidated while a pNFS I/O operation
is queued for transmission, then we ideally want to abort
immediately. This is particularly the case when there is a large
number of I/O related RPCs queued in the RPC layer, and the layout
segment gets invalidated due to an ENOSPC error, or an EACCES (because
the client was fenced). We may end up forced to spam the MDS with a
lot of otherwise unnecessary LAYOUTERRORs after that I/O fails.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
39a5201a2b NFSv4/pnfs: Fix barriers in nfs4_mark_deviceid_unavailable()
Fix the memory barriers in nfs4_mark_deviceid_unavailable() and
nfs4_test_deviceid_unavailable().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
762bb7e973 NFS/flexfiles: Fix up sparse RCU annotations
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
108bb4afd3 NFSv4/flexfiles: Fix invalid deref in FF_LAYOUT_DEVID_NODE()
If the attempt to instantiate the mirror's layout DS pointer failed,
then that pointer may hold a value of type ERR_PTR(), so we need
to check that before we dereference it.

Fixes: 65990d1afb ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Anna Schumaker
1a3466aed3 NFS: Add missing encode / decode sequence_maxsz to v4.2 operations
These really should have been there from the beginning, but we never
noticed because there was enough slack in the RPC request for the extra
bytes. Chuck's recent patch to use au_cslack and au_rslack to compute
buffer size shrunk the buffer enough that this was now a problem for
SEEK operations on my test client.

Fixes: f4ac1674f5 ("nfs: Add ALLOCATE support")
Fixes: 2e72448b07 ("NFS: Add COPY nfs operation")
Fixes: cb95deea0b ("NFS OFFLOAD_CANCEL xdr")
Fixes: 624bd5b7b6 ("nfs: Add DEALLOCATE support")
Fixes: 1c6dcbe5ce ("NFS: Implement SEEK")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:19:46 -05:00
Masami Hiramatsu
49ef5f4570 tracing/kprobes: Use probe_kernel_read instead of probe_mem_read
Use probe_kernel_read() instead of probe_mem_read() because
probe_mem_read() is a kind of wrapper for switching memory
read function between uprobes and kprobes.

Link: http://lkml.kernel.org/r/20190222011643.3e19ade84a3db3e83518648f@kernel.org

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-01 16:18:15 -05:00
Pavel Tikhomirov
6a072128d2 tracing: Fix event filters and triggers to handle negative numbers
Then tracing syscall exit event it is extremely useful to filter exit
codes equal to some negative value, to react only to required errors.
But negative numbers does not work:

[root@snorch sys_exit_read]# echo "ret == -1" > filter
bash: echo: write error: Invalid argument
[root@snorch sys_exit_read]# cat filter
ret == -1
        ^
parse_error: Invalid value (did you forget quotes)?

Similar thing happens when setting triggers.

These is a regression in v4.17 introduced by the commit mentioned below,
testing without these commit shows no problem with negative numbers.

Link: http://lkml.kernel.org/r/20180823102534.7642-1-ptikhomirov@virtuozzo.com

Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-01 16:11:09 -05:00
Eran Ben Elisha
85327a9c41 net/mlx5: Update the list of the PCI supported devices
Add the upcoming ConnectX-6 Dx.

In addition, add "ConnectX Family mlx5Gen Virtual Function" device ID.
Every new HCA VF will be identified with this device ID. Different VF
models will be distinguished by their revision id.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:18 -08:00
Roi Dayan
10fbb1cdd0 net/mlx5e: Set peer flow needed also for multipath
Update the predicate that determines if to duplicate rules installed on
vport reps to account also for the multipath case.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:18 -08:00
Roi Dayan
68931c7dd7 net/mlx5e: Update check for merged eswitch device
The current check only validates if both netdevs use the same ops
which means both are vf reps or both uplink reps.

Unlike the case where the two uplinks are bonded (VF LAG), under
multipath scheme the switchdev parent id is not unified between the
uplink reps (and all the associated vf reps). However, we still want
to duplicate in the driver encap flows, adjust the merged eswitch
check for that matter.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:18 -08:00
Roi Dayan
5fb091e813 net/mlx5e: Use hint to resolve route when in HW multipath mode
As part of creating the tunnel headers while offloading TC encap rules,
we resolve the route and neighbour in order to get the source /
destination mac.

Since the way we offload multipath route is by having two HW rules,
one per uplink port, doing naive route lookup might get us a "wrong"
routing path which goes through the peer uplink and this will get us
eventually to create a wrong L2 header for the tunnel.

To avoid that, we use a device hint to get the correct route.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:17 -08:00
Roi Dayan
316d5f72b4 net/mlx5e: Always query offloaded tc peer rule counter
Under multipath when encap rules are duplicated to HW in the driver,
it's possible for one flow to be currently un-offloaded (e.g. lack of
next-hop route or neigh entry) while the other flow is offloaded. As
such, we move to query the counters of both flows at all times.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:17 -08:00
Roi Dayan
b4a23329e2 net/mlx5e: Re-attempt to offload flows on multipath port affinity events
Under multipath it's possible for us to offload the flow only through
the e-switch for which proper route through the uplink exists.
When the port is up and the next-hop route is set again we want to
offload through it as well.

We generate SW event from the FIB event handler when multipath port
affinity changes. The tc offloads code gets this event, goes over the
flows which were marked as of having missing route and attempts to
offload them.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:17 -08:00
Roi Dayan
6997b1c9ca net/mlx5: Emit port affinity event for multipath offloads
Under multipath offload scheme, as part of handling fib events, emit
mlx5 port affinity event on the enabled ports which will be handled by
the tc offloads code.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:17 -08:00
Roi Dayan
ef06c9ee89 net/mlx5e: Allow one failure when offloading tc encap rules under multipath
In a similar manner to uplink/VF LAG, under multipath we add encap peer
rule on the second port as well.

However, unlike the LAG case, we do want to allow failure for adding
one of the rules. This happens due to using a routing hint while doing
the route lookup when one path (next hop device) is down.

Introduce a new flag to indicate that route lookup failed for encap
flow. Note that a flow may still not be offloaded to hw due to missing
neighbour, in that case, the neigh update event will take care of it.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:16 -08:00
Roi Dayan
95dc1902c3 net/mlx5e: Don't inherit flow flags on peer flow creation
Currently the peer flow inherits the flags from the original flow
after we've set it. At this time the flags are set according to
the flow state, e.g marked as going to slow path and such.

Even if not getting us to real bugs now, this opens the door to
get us to troubles later. Future proof the code and avoid the
inheritance, use the peer flags as were set on input when we
started adding the original flow.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:16 -08:00
Roi Dayan
544fe7c2e6 net/mlx5e: Activate HW multipath and handle port affinity based on FIB events
To support multipath offload we are going to track SW multipath route
and related nexthops. To do that we register to FIB notifier and handle
the route and next-hops events and reflect that as port affinity to HW.

When there is a new multipath route entry that all next-hops are the
ports of an HCA we will activate LAG in HW.

Egress wise, we use HW LAG as the means to emulate multipath on current
HW which doesn't support port selection based on xmit hash. In the
presence of multiple VFs which use multiple SQs (send queues) this
yields fairly good distribution.

HA wise, HW LAG buys us the ability for a given RQ (receive queue) to
receive traffic from both ports and for SQs to migrate xmitting over
the active port if their base port fails.

When the route entry is being updated to single path we will update
the HW port affinity to use that port only.

If a next-hop becomes dead we update the HW port affinity to the living
port.

When all next-hops are alive again we reset the affinity to default.

Due to FW/HW limitations, when a route is deleted we are not disabling
the HW LAG since doing so will not allow us to enable it again while
VFs are bounded. Typically this is just a temporary state when a
routing daemon removes dead routes and later adds them back as needed.

This patch only handles events for AF_INET.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:16 -08:00
Roi Dayan
724b509ca0 net/mlx5: Add multipath mode
In order to offload ecmp-on-host scheme where next-hop routes are used,
we will make use of HW LAG. Add accessor function to let upper layers
in the driver to realize if the lag acts in multi-path mode.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:16 -08:00
Roi Dayan
e6ee5e7166 net/mlx5: Use own workqueue for lag netdev events processing
Instead of using the system workqueue, allocate our own workqueue.
This workqueue will be used to handle more work in the next patch.

This patch doesn't change functionality.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:16 -08:00
Roi Dayan
10a193ed78 net/mlx5: Expose lag operations in header file
The change is a refactoring step towards a multipath use case.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:15 -08:00
Roi Dayan
bb19ad0d8d net/mlx5: Use unsigned int bit instead of bool as a struct member
This fix checkpatch check
CHECK: Avoid using bool structure members because of possible alignment
issues

Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:15 -08:00
Roi Dayan
0ad060ee9c net/mlx5e: Don't make internal use of errno to denote missing neigh
EAGAIN is treated as a specific case when we consider the attachment
successful but wait for neigh event before offloading the flow.
This can result in unwanted behavior when sub calls on the offloading
path will return EAGAIN and we pass this error up.

Instead of attaching to a specific error code return a  boolean value
from the attach encap operation saying if the encap is valid or not.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:15 -08:00
Roi Dayan
733d4f367c net/mlx5e: Cleanup attach encap function
Remove the tunnel info argument which we can get from the other args.
Also reorder the args to have input args first and output args later.

This patch doesn't change functionality.

Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:15 -08:00
Eran Ben Elisha
6bdbc1cb6c net/mlx5e: Declare mlx5e_tx_reporter_recover_from_ctx as static
Function mlx5e_tx_reporter_recover_from_ctx is only used within mlx5e tx
reporter, move it to be statically declared in en/reporter_tx.c.

Fixes: de8650a820 ("net/mlx5e: Add tx reporter support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01 12:04:15 -08:00
Joe Perches
1c7cf3d5e1 wusb: Remove unnecessary static function ckhdid_printf
This static inline is unnecessary and can be removed
by using the vsprintf %ph extension.

This reduces overall object size by more than 2K.

Reported-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01 20:53:41 +01:00
Mans Rullgard
5d5d44dec7 usb: core: make default autosuspend delay configurable
Make the default autosuspend delay configurable at build time.
This is useful for systems that require a non-standard value as
it avoids relying on the command line being properly set.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01 20:53:41 +01:00
David S. Miller
699be71534 Merge branch 'nfp-control-processor-DMA-support-and-RJ45'
Jakub Kicinski says:

====================
nfp: control processor DMA support and RJ45

This series starts with adding support for reporting twisted pair
media type in ethtool.

Remaining patches add support for using DMA with the control/service
processor.  Currently we always copy the command data into card's
memory.  DMA support allows us to have the NSP read the data from
host memory by itself.  Unfortunately, the FW loading and flashing
cannot directly map the buffers for DMA because (a) the firmware
ABI returns const buffers, and (b) the buffers may be vmalloc()ed
in many mysterious/unmappable way.  So just bite the bullet -
allocate new host buffer for the command and copy.

As Dirk explains, the NSP now supports updating all FWs at once
which means the max flashing time grew significantly.  He bumps
the max wait to avoid timeouts.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:36:01 -08:00
Dirk van der Merwe
35697764d7 nfp: nsp: set higher timeout for flash bundle
The management firmware now supports being passed a bundle with
multiple components to be stored in flash at once. This makes it
easier to update all components to a known state with a single
user command, however, this also has the potential to increase
the time required to perform the update significantly.

The management firmware only updates the components out of a bundle
which are outdated, however, we need to make sure we can handle
the absolute worst case where a CPLD update can take a long time
to perform.

We set a very conservative total timeout of 900s which already
adds a contingency.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:36:01 -08:00
Jakub Kicinski
345415138d nfp: nsp: allow the use of DMA buffer
Newer versions of NSP can access host memory.  Simplest access
type requires all data to be in one contiguous area.  Since we
don't have the guarantee on where callers of the NSP ABI will
allocate their buffers we allocate a bounce buffer and copy
the data in and out.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:36:01 -08:00
Jakub Kicinski
66487abe2f nfp: nsp: move default buffer handling into its own function
DMA version of NSP communication is coming, move the code which
copies data into the NFP buffer into a separate function.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:36:00 -08:00
Jakub Kicinski
882cdcb5d3 nfp: nsp: use fractional size of the buffer
NSP expresses the buffer size in MB and 4 kB blocks.  For small
buffers the kB part may make a difference, so count it in.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:36:00 -08:00
Jakub Kicinski
1e301a1407 nfp: report RJ45 connector in ethtool
Add support for reporting twisted pair port type.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:36:00 -08:00
Bryan Whitehead
90490ef726 lan743x: Fix TX Stall Issue
It has been observed that tx queue stalls while downloading
from certain web sites (example www.speedtest.net)

The cause has been tracked down to a corner case where
dma descriptors where not setup properly. And there for a tx
completion interrupt was not signaled.

This fix corrects the problem by properly marking the end of
a multi descriptor transmission.

Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01 11:34:09 -08:00