Commit graph

982,081 commits

Author SHA1 Message Date
Lorenzo Bianconi
5ed3112878 mt76: move mt76_dma_tx_queue_skb_raw in mt76-core module
Move mt76_dma_tx_queue_skb_raw routine in dma.c and add the
corresponding entry in mt76_queue_ops data structure.
mt76_dma_tx_queue_skb_raw  will be reused adding support for
mt7603 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:33 +01:00
Lorenzo Bianconi
6f02aeabc9 mt76x0: mcu: remove useless commented configuration
Remove useless commented out configuration in mt76x0u_load_firmware
routine

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:33 +01:00
Lorenzo Bianconi
c07a49d475 mt76: move mt76_mcu_rx_event in mt76-core
Move mt76_mcu_rx_event i mt76-core module and remove duplicated code.
mt76_mcu_rx_event will be reused adding support for mt7603 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:33 +01:00
Lorenzo Bianconi
680abb25f7 mt76: move mt76_mcu_get_response in mt76-core
Move mt76_mcu_get_response in mt76-core module and remove duplicated
code. mt76_mcu_get_response will be reused adding support for mt7603
driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:33 +01:00
Lorenzo Bianconi
9df0fab9d1 mt76: move mt76_mcu_msg_alloc in mt76-core
Move mt76_mcu_msg_alloc in mt76-core module and remove duplicated code.
mt76_mcu_msg_alloc will be reused adding support for mt7603 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:33 +01:00
Lorenzo Bianconi
b29e46b765 mt76x0: eeprom: fix VHT mcs{8,9} rate power offset
Fix rate power configuration for VHT mcs 8 and 9 in
mt76x0_get_tx_power_per_rate. Moreover use the rate power
offset used for HT/VHT mcs 6 even for HT/VHT mcs 7

Fixes: b37bbc8c82 ("mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:33 +01:00
Stanislaw Gruszka
2bd7f3d2a9 mt76x02: enable support for IBSS and MESH
Since we implement beconing on USB now, similar interfaces should be
supported for USB as are for MMIO. Tested only on IBSS mode and
AP mode (not enabled due to lack of PS buffering).

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:32 +01:00
Stanislaw Gruszka
dbb2b22b11 mt76: beaconing fixes for USB
Configure beaconing on USB devices without PS buffering support.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:32 +01:00
Stanislaw Gruszka
b08ca4dc95 mt76x02: init beacon config for mt76x2u
Initialize beaconing also on mt76x2u.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:32 +01:00
Stanislaw Gruszka
39834c1293 mt76x02: minor beaconing init changes
Disable BEACON timer during init and configure interrupt registers
only for mmio devices.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:32 +01:00
Stanislaw Gruszka
0b2d27e5b8 mt76x02: initialize mutli bss mode when set up address
BSSID is not strtirct related with beaconing (for example we can have
2 STA vifs) and more related with MAC address, so initaize BSSID when
setting MAC address.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:32 +01:00
Stanislaw Gruszka
f9a043c582 mt76x02: use commmon add interface for mt76x2u
Since we now support mt76x2u feature to allow set mac address
when creating interface in common code we can use it for
mt76x2u.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:32 +01:00
Stanislaw Gruszka
06662264ce mt76x02: use mask for vifs
Use vif_mask to count interfaces to allow to set mac address in HW
if there is only one interface and report error if we create
interface with wrong BSSID resulting in already used index.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:32 +01:00
Mark Brown
9516e531fa
Merge branch 'for-5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1 for refcount fix 2019-02-18 18:51:48 +00:00
Kuninori Morimoto
19dd077777
ASoC: simple-card: fixup refcount_t underflow
commit da215354eb ("ASoC: simple-card: merge simple-scu-card")
merged simple-card and simple-scu-card. Then it had refcount
underflow bug. This patch fixup it.
We will get below error without this patch.

	OF: ERROR: Bad of_node_put() on /sound
	CPU: 3 PID: 237 Comm: kworker/3:1 Not tainted 5.0.0-rc6+ #1514
	Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
	Workqueue: events deferred_probe_work_func
	Call trace:
	 dump_backtrace+0x0/0x150
	 show_stack+0x24/0x30
	 dump_stack+0xb0/0xec
	 of_node_release+0xd0/0xd8
	 kobject_put+0x74/0xe8
	 of_node_put+0x24/0x30
	 __of_get_next_child+0x50/0x70
	 of_get_next_child+0x40/0x68
	 asoc_simple_card_probe+0x604/0x730
	 platform_drv_probe+0x58/0xa8
	 ...
Reported-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 18:36:52 +00:00
Axel Lin
ef541f73d1
regulator: stpmic1: Remove regul_id and *regmap from struct stpmic1_regulator
At the context with *rdev available, regulator core provides
rdev_get_id()/rdev_get_regmap() APIs to get regulator id and *regmap.
So no need to store them in struct stpmic1_regulator.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 18:28:06 +00:00
Axel Lin
55e72728cd
regulator: pv88060: Fix .ops for PV88060_SW
There is no vsel_reg/vsel_mask settings for PV88060_ID_SWx, so don't use
pv88060_ldo_ops for PV88060_SW. The PV88060_ID_SWx is fixed voltage,
set .fixed_uV instead of .min_uV then regulator core will automatically
support get_voltage and list_voltage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 18:27:51 +00:00
Daniel Baluta
461d854c0d
ASoC: simple-card: Fix refcount underflow
of_get_child_by_name() takes a reference we'll need to drop
later so when we substitute in top we need to take a reference
as well as just assigning.

Without this patch we hit the following error:

[    1.246852] OF: ERROR: Bad of_node_put() on /sound-wm8524
[    1.262261] Hardware name: NXP i.MX8MQ EVK (DT)
[    1.266807] Workqueue: events deferred_probe_work_func
[    1.271950] Call trace:
[    1.274406]  dump_backtrace+0x0/0x158
[    1.278074]  show_stack+0x14/0x20
[    1.281396]  dump_stack+0xa8/0xcc
[    1.284717]  of_node_release+0xb0/0xc8
[    1.288474]  kobject_put+0x74/0xf0
[    1.291879]  of_node_put+0x14/0x28
[    1.295286]  __of_get_next_child+0x44/0x70
[    1.299387]  of_get_next_child+0x3c/0x60
[    1.303315]  simple_for_each_link+0x1dc/0x230
[    1.307676]  simple_probe+0x80/0x540
[    1.311256]  platform_drv_probe+0x50/0xa0

This patch is based on an earlier version posted by Kuninori Morimoto
and commit message includes explanations from Mark Brown.

https://patchwork.kernel.org/patch/10814255/

Reported-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 18:24:28 +00:00
Sylwester Nawrocki
b5c16a24ef
ASoC: samsung: odroid: Ensure proper sample rate on pri/sec PCM
Currently when playing sound with different sample rates actual
sample rate will be determined by audio stream which starts first
on either primary or secondary PCM. The audio root clock will be
configured appropriately only for the first stream. As the hardware
is limited to same sample rate on both interfaces we need to disallow
streams with different sample rates. It is done by this patch by
returning error in FE hw_params if there is already active stream
running with different sample rate.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 18:24:14 +00:00
YueHaibing
70605450fd
ASoC: stm32: sai: remove set but not used variables 'mask, cr1'
Fixes gcc '-Wunused-but-set-variable' warning:

sound/soc/stm/stm32_sai_sub.c: In function 'stm32_sai_configure_clock':
sound/soc/stm/stm32_sai_sub.c:902:11: warning:
 variable 'mask' set but not used [-Wunused-but-set-variable]
sound/soc/stm/stm32_sai_sub.c:902:6: warning:
 variable 'cr1' set but not used [-Wunused-but-set-variable]

It's not used any more after 8307b2afd3 ("ASoC: stm32: sai: set sai as
mclk clock provider")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 18:23:59 +00:00
Bard liao
304017d31d
ASoC: topology: free created components in tplg load error
Topology resources are no longer needed if any element failed to load.

Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 18:21:49 +00:00
Kalle Valo
f77ecde5f2 Fourth batch of iwlwifi patches intended for v5.1
* Work on the new debugging infrastructure continues;
 * FTM (Fine Timing Measurement) initiator and responder implementation;
 * Support for a new device family started;
 * Bump supported FW API to 46;
 * General bugfixes;
 * Other cleanups;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlxlNmgACgkQoUecoho8
 xfolGg//Z0843gfkrCMCrix+qgrV1NzBSnPKndlrcNKdmzzpdVuLiNDyY+Ij2FyK
 d/DuqmSsU0yhCJruHu1PN8cJ8uA9UJV8SMo7HvT/1RFV0d1MqYIKGMKn3BUm8KjR
 jxm7/RSnXf0DrVaHwyo3+mQT9b0RwfT9mHzo+ARxQLYqX+HwWVlYYM+905YKU4jK
 GOogrK5i3iIjtImLYibSd4DlsS1ws5oD3nQEn/IxTZVk0aqv49qQkM6+OHVp/6hi
 oA0ZQe+R19SfXBB2ushblapRGlmPiwZ3hhpHyJcxIhqX+UpYRFYgASqSygG6XhjJ
 wB8G6KegNSq1Rg6Sw2HZn28XGhsm1Kh67PZkIMp6k4OAttk+fw5NylRi+YwCAMZP
 axVjtjikUt/Td97TZtjOTjI58+ZN1kQo/3Th3gB9Pg9x7yjcJknAltFXr+kc8Cd9
 gq4vPkojP9P+itHI3CcCrHRWnhA3H5ynmLkEmDSCIGJlCxecTKmwg99KRjDzhlOr
 AZd5rs0+C7u3FlrL0jagrpuy1nF038e56drmuAbHecK561IEx2UY8XofYxvapb0Y
 /0q8NPdX0Hhe229T0vtTDJnTGYjnV0pSqOhAouPyZz3V9zUiPVWbJ3tqaxH11vDI
 KjJiOkxPcWpRfAWtovAfY/0l/q2ungpGxqq3lthg3kQa3wUwwtM=
 =B8hU
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-next-for-kalle-2019-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Fourth batch of iwlwifi patches intended for v5.1

* Work on the new debugging infrastructure continues;
* FTM (Fine Timing Measurement) initiator and responder implementation;
* Support for a new device family started;
* Bump supported FW API to 46;
* General bugfixes;
* Other cleanups;
2019-02-18 20:10:46 +02:00
Linus Torvalds
301e361072 - API: Fix build breakge by exporting the function mbox_flush
- BRCM: Fix FlexRM ring flush timeout issue
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAlxq46MACgkQf9lkf8eY
 P5WnUA/9GntqiC3vyGtLpivp7oa5+N6QhBbw3mTNTtOmHsw4bI25wnPJcsC5k3Nt
 QjJbFv0itovZvdWivBMmNivPhsLyoitz8S4eRyhDfaqo9kza2yz3KH4xIYsgzyyB
 tIs0LLqihi6DmnMHbV+oTmniLHipMi0Coe9c9+7YPwJkS1wqCYib79yo8IG242/s
 +AQ7yxEDET4gL+yqmmZUWS0oBE0ad4wCOm1l7mNym3Gb4IK1kGonx/7H2McGOLYt
 uTpYZexRF78vsjkO+UiJj6siExcPytBSzK/OAfUcbPUnUM4GaArbvQdf8x1yCEIP
 IeaCAWL1oeC83Q4HNLQOOqtFQzK6B7YKgKSYf21ROb7aOlsvAIZ7/vII75dGOa32
 zukCJbBEplMv2XiVkHZxmdGAcH54LxeKuS9bH6Pr5PPcWtJYqIXt6NKtG9tMRTpu
 lghl5SbKZd7W2T0yCTcheXVei8fcqfRFlKhuDSeDhoomJSwqv94Ac2ZfZuncmMbu
 Le0m8NLgD9di8nUVeKTR1Z/IgHBudlnsPSp5l2rE51dDsJ1jKIMCSf3zQT/tjPTS
 74iEdVgH/d6kAfCaHCdDoPnVIvh7KIe8HVMa7W0SSxXQMEp2pCBMnHBIMfkxN0dq
 aBAjxUoM4ldg5mUdUPB7WFFn/MofvzjEnziEZMTF8m/rXZlRwz4=
 =NPyS
 -----END PGP SIGNATURE-----

Merge tag 'mailbox-fixes-v5.0-rc7' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox fixes from Jassi Brar:

 - API: Fix build breakge by exporting the function mbox_flush

 - BRCM: Fix FlexRM ring flush timeout issue

* tag 'mailbox-fixes-v5.0-rc7' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue
  mailbox: Export mbox_flush()
2019-02-18 10:03:19 -08:00
Marek Szyprowski
4dc185ccc7 ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
ARM Performance Monitoring Units (PMUs) are permanently disabled in the
Exynos5422 SoC version used on Odroid XU3-lite boards. Disable them in
boards dtb to avoid confusing user and getting following warning on boot:

hw-breakpoint: Failed to enable monitor mode on CPU 0

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-02-18 18:59:30 +01:00
Linus Torvalds
3ddc14e25e A few ARM fixes:
- Dietmar Eggemann noticed an issue with IRQ migration during CPU hotplug
   stress testing.
 - Mathieu Desnoyers noticed that a previous fix broke optimised kprobes.
 - Robin Murphy noticed a case where we were not clearing the dma_ops.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAXGVW//TnkBvkraxkAQK8wg/8D8TzU4nuO7r/0n6YXS6quJz15VRmK6uu
 c+geOFmQ5VOWYJZDJ94IWEjXd/W1X6JpN94zL+xefJ5Ct38YBjhyYqq41HGoxAtV
 YjwXZAY6kkjMR8HBW+Xkhn0WcefE+QjMNPjUQUtpfLTvQpiaBC94zCeiw6ttxBv5
 fkSlYUq1OGf8i75bBHBg7Nj2UFMn2so/1dYOr3OejVAq+b/r82D4bm0ykXiHFzrH
 RDT+VKcSjsxFCFBPqN/76Lf4rUTZqgIsl3h/LRBdvOGo3M/7t26ByJZ4p9nYgsDh
 VfeitZCxUHRIBoBjqPA+uAhb5G/Ya4Qf+fyauuQuMMRxpnjACCxG5OekG/+UMZEK
 4/8mhO8u33bphqHB+b6e6LRPke+EHC+quj3CLYgxyY6PKzSBk1tUSiGhxIbmR0Yw
 a4VtY31832BN5BSyCJvfYdl/+brs+Nujhjbzd66+3EvU0zgPISuXXBwfWkqmwshU
 S+Yj/BVo/wCwnGsqY6UFqtdEBL9J+Oe1J6I3Y6hzPd27egv7IIFWCGkL+gWPxWtd
 YbbgdfU3dL7fTw5j6Es6mdFkz+uWwWSfTs1ImB4EAYQzNgkJrfxJrbA6v1PfzLDP
 5sFMB3W8fwPfT7Qq11QpjEywn1+fi/JFrWLsW2xUAFVd79HPIbsEf8eZQF5OA0Qw
 4jDzQqOr9Sc=
 =KSCg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A few ARM fixes:

   - Dietmar Eggemann noticed an issue with IRQ migration during CPU
     hotplug stress testing.

   - Mathieu Desnoyers noticed that a previous fix broke optimised
     kprobes.

   - Robin Murphy noticed a case where we were not clearing the dma_ops"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8835/1: dma-mapping: Clear DMA ops on teardown
  ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction
  ARM: 8824/1: fix a migrating irq bug when hotplug cpu
2019-02-18 09:59:28 -08:00
Marek Szyprowski
8e0861fd7f ARM: dts: exynos: Add stdout path property to Arndale board
Replace bootargs and kernel console parameter with 'stdout-path' property
in 'chosen' node to instruct kernel which serial driver should be used
for the kernel console and logs. This allows to enable earlycon messages
by adding just 'earlycon' parameter to kernel command line.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-02-18 18:58:36 +01:00
Marek Szyprowski
a66352e005 ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
PMU node. This fixes the following warning on boot:

exynos_clkout_init: failed to register clkout clock

Fixes: d19bb397e1 ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-02-18 18:57:24 +01:00
Wei Yongjun
b2c02c63ac
ASoC: cs35l36: Make some symbols static
Fixes the following sparse warnings:

sound/soc/codecs/cs35l36.c:135:20: warning:
 symbol 'cs35l36_reg' was not declared. Should it be static?
sound/soc/codecs/cs35l36.c:248:6: warning:
 symbol 'cs35l36_readable_reg' was not declared. Should it be static?
sound/soc/codecs/cs35l36.c:398:6: warning:
 symbol 'cs35l36_precious_reg' was not declared. Should it be static?
sound/soc/codecs/cs35l36.c:410:6: warning:
 symbol 'cs35l36_volatile_reg' was not declared. Should it be static?

Fixes: 6ba9dd6c89 ("ASoC: cs35l36: Add support for Cirrus CS35L36 Amplifier")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:42:37 +00:00
Cheng-Yi Chiang
74c6ecf419
ASoC: qcom: Kconfig: select dmic for sdm845
sdm845 uses dmic on EC so it should select CROS_EC_CODEC.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:42:22 +00:00
Viorel Suman
2231609a2c
ASoC: fsl_spdif: fix sysclk_df type
According to RM SPDIF STC SYSCLK_DF field is 9-bit wide, values
being in 0..511 range. Use a proper type to handle sysclk_df.

Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:42:09 +00:00
Viorel Suman
30c498a10a
ASoC: fsl_spdif: fix TXCLK_DF mask
According to RM SPDIF TXCLK_DF mask is 7-bit wide.

Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:41:55 +00:00
Codrin Ciubotariu
5952947375
ASoC: codecs: ad193x: Add support to disable on-chip PLL
The on-chip PLL can be disabled if on the MCLKI pin we have an external
clock at 512 x fs. This clock can be used as direct internal clock for
ADCs or DACs.
To support this, we add an extra clock id that can be configured
using the set_sysclk() callback.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:41:42 +00:00
Codrin Ciubotariu
bccf9c7e14
ASoC: codecs: ad193x: Add runtime support for DSP_A and I2S modes
The driver only supports DPS_A for DAC, which is configured at probe.
This patch adds support for DSP_A and I2S modes by using the set_fmt()
callback.

A trivial break is also removed from a case's default branch.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:41:29 +00:00
Codrin Ciubotariu
90f6e68031
ASoC: codecs: ad193x: Fix frame polarity for DSP_A format
By default, the codec starts to interpret the left (first) channel on
the falling edge (low polarity) of LRCLK. However, for DSP_A, the left
channel needs to start on the rising edge of LRCLK. This patch fixes
this channel swap by toggling the bit which selects the LRCLK polarity.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:41:16 +00:00
Codrin Ciubotariu
75c2ecb4bd
ASoC: codecs: ad193x: Set constraint to always have 32 sample bits
DACs and ADCs on ad193x codecs require a 32 bit slot size. We should
assure that no other size is used.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:41:03 +00:00
Codrin Ciubotariu
7aac8d13fc
ASoC: codecs: ad193x: Remove capture support for codecs without ADC
Some ad193x codecs don't have ADCs, so they have no capture capabilities.
This way, we can use this driver in multicodec cards.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:40:50 +00:00
Linus Torvalds
10f4902173 Two more tracing fixes
- Have kprobes not use copy_from_user() to access kernel addresses,
    because kprobes can legitimately poke at bad kernel memory, which
    will fault. Copy from user code should never fault in kernel space.
    Using probe_mem_read() can handle kernel address space faulting.
 
  - Put back the entries counter in the tracing output that was accidentally
    removed.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXGb7BxQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qqvaAQC66gQ79frSW7xPjJ4Y+qLIm0YDV18i
 aCHowAXxDeK3qAEA3sDeELAPVupacPrzZc6zejI+bf0HArPe08n3vlHwAQw=
 =uUQj
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Two more tracing fixes

   - Have kprobes not use copy_from_user() to access kernel addresses,
     because kprobes can legitimately poke at bad kernel memory, which
     will fault. Copy from user code should never fault in kernel space.
     Using probe_mem_read() can handle kernel address space faulting.

   - Put back the entries counter in the tracing output that was
     accidentally removed"

* tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix number of entries in trace header
  kprobe: Do not use uaccess functions to access kernel memory that can fault
2019-02-18 09:40:16 -08:00
Krzysztof Kozlowski
e653eaed97 ARM: dts: exynos: Enable ADC on Odroid HC1
Odroid HC1 uses the exynos5422-odroid-core.dtsi file as a base.  All
other Exynos5422 Odroids use the "common".  The ADC node was defined
only in the latter.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-02-18 18:39:47 +01:00
Darrick J. Wong
15baadf72c xfs: fix xfs_buf magic number endian checks
Create a separate magic16 check function so that we don't run afoul of
static checkers.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-02-18 09:38:41 -08:00
Cody P Schafer
46c039d06b media: cx25840: mark pad sig_types to fix cx231xx init
Without this, we get failures like this when the kernel attempts to
initialize a cx231xx device:

	[16046.153653] cx231xx 3-1.2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 6 interfaces
	[16046.153900] cx231xx 3-1.2:1.1: can't change interface 3 alt no. to 3: Max. Pkt size = 0
	[16046.153907] cx231xx 3-1.2:1.1: Identified as Hauppauge USB Live 2 (card=9)
	[16046.154350] i2c i2c-11: Added multiplexed i2c bus 13
	[16046.154379] i2c i2c-11: Added multiplexed i2c bus 14
	[16046.267194] cx25840 10-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
	[16048.424551] cx25840 10-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
	[16048.463224] cx231xx 3-1.2:1.1: v4l2 driver version 0.0.3
	[16048.567878] cx231xx 3-1.2:1.1: Registered video device video2 [v4l2]
	[16048.568001] cx231xx 3-1.2:1.1: Registered VBI device vbi0
	[16048.568419] cx231xx 3-1.2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
	[16048.568425] cx231xx 3-1.2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
	[16048.568431] cx231xx 3-1.2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
	[16048.568436] cx231xx 3-1.2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
	[16048.568448] usb 3-1.2: couldn't get decoder output pad for V4L I/O
	[16048.568453] cx231xx 3-1.2:1.1: V4L2 device vbi0 deregistered
	[16048.568579] cx231xx 3-1.2:1.1: V4L2 device video2 deregistered
	[16048.569001] cx231xx: probe of 3-1.2:1.1 failed with error -22

Likely a regession since Commit 9d6d20e652
("media: v4l2-mc: switch it to use the new approach to setup pipelines")
(v4.19-rc1-100-g9d6d20e652c0), which introduced the use of
PAD_SIGNAL_DV within v4l2_mc_create_media_graph().

This also modifies cx25840 to remove the VBI pad, matching the action
taken in Commit 092a37875a ("media: v4l2: remove VBI output pad").

Fixes: 9d6d20e652 ("media: v4l2-mc: switch it to use the new approach to setup pipelines")

Cc: stable@vger.kernel.org
Signed-off-by: Cody P Schafer <dev@codyps.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:33:20 -05:00
Colin Ian King
e3e71be056 media: wl128x: fix spelling mistake: "Swtich" -> "Switch"
There is a spelling mistake in a fmdbg debug message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:32:43 -05:00
Hans Verkuil
cdabfa8402 media: vimc: fix memory leak
media_device_cleanup() wasn't called, which caused a small
memory leak.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:32:21 -05:00
Hans Verkuil
959bba1342 media: vivid: two unregistration fixes
When the media device registration fails, don't call media_device_unregister
since the device was never actually registered.

When removing the module also call media_device_cleanup() to avoid a memory leak.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:31:58 -05:00
Masahiro Yamada
075ddd7568
regulator: core: remove unused rdev_get_supply()
This is a remnant of commit 70a7fb80e8 ("regulator: core: Fix nested
locking of supplies").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:14:49 +00:00
Sakari Ailus
dd1df35dd0 media: soc_camera: Depend on BROKEN
This patch makes the SoC camera framework as well as effectively the few
remaining sensor drivers depend on BROKEN, rendering it uncompileable
without changes in Kconfig.

The purpose is to leave the code around if someone wishes to convert the
drivers to the modern day V4L2 sub-device framework without having to go
to see development history in git.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:14:31 -05:00
Sakari Ailus
dc548ee077 media: soc_camera: Move the mt9t031 under soc_camera directory
Move the mt9t031 driver to the soc_camera directory in the media staging
tree.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:13:49 -05:00
Sakari Ailus
045f95e773 media: soc_camera: Move the imx074 under soc_camera directory
Move the imx074 driver to the soc_camera directory in the media staging
tree.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:11:49 -05:00
Ondrej Jirman
4afa60d3a8
regulator: axp20x: fix DCDCB and BLDO2 definitions for AXP806
This fixes another set of errors from the refactoring of literals
to mask preproccesor definitions.

Found by debugging a broken voltage setup on Orange Pi One Plus.

Fixes: db4a555f7c ("regulator: axp20x: use defines for masks")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18 17:09:47 +00:00
Sakari Ailus
280de94a65 media: soc_camera: Move to the staging tree
The SoC camera framework has no functional drivers left, something that
has not changed for years. Move the leftovers to the staging tree.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:09:19 -05:00
Yan, Zheng
04242ff3ac ceph: avoid repeatedly adding inode to mdsc->snap_flush_list
Otherwise, mdsc->snap_flush_list may get corrupted.

Cc: stable@vger.kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-18 18:08:29 +01:00