Just like vb2 does, use u64 internally to store the timestamps
of the buffers. Only convert to timeval when interfacing with
userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Just like vb2 does, use u64 internally to store the timestamps
of the buffers. Only convert to timeval when interfacing with
userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Just like vb2 does, use u64 internally to store the timestamps
of the buffers. Only convert to timeval when interfacing with
userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Just like vb2 does, use u64 internally to store the timestamps
of the buffers. Only convert to timeval when interfacing with
userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Just like vb2 does, use u64 internally to store the timestamps
of the buffers. Only convert to timeval when interfacing with
userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Internally use ktime_get_ns() to get the timestamp of the event.
Only convert to timespec when interfacing with userspace.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This enables mute LED support and fixes switching jacks when the laptop
is docked.
Signed-off-by: Jurica Vukadin <jurica.vukadin@rt-rk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
update_wm_post is meant for pre-g4x only. Don't ever set
it on g4x+.
The only effect of a bogus update_wm_post on g4x+ could
be that we clear the legacy_cursor_update flag in
intel_atomic_commit(). Since legacy_cursor_update is
only set for legacy cursor updates (as the name suggests)
and we only set update_wm_post for a modeset the two
cases should never occur at the same time. But let's
be consistent in setting update_wm_post so we don't
end up confusing so many people.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206185433.8116-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add support for booting secondary CPUs on MT7629.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The comparison css->pipes[pipe].bindex < 0 is always false because
bindex is an unsigned int. Fix this by using a signed integer for
the comparison.
Detected by CoverityScan, CID#1476023 ("Unsigned compared against 0")
Fixes: f5f2e42735 ("media: staging/intel-ipu3: Add css pipeline programming")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since ipu3_css_buf_dequeue() never returns NULL, remove the
dead code to fix static checker warning:
drivers/staging/media/ipu3/ipu3.c:493 imgu_isr_threaded()
warn: 'b' is an error pointer or valid
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
[Bug report: https://lore.kernel.org/linux-media/20190104122856.GA1169@kadam/]
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This addresses the below TODO item.
- Use V4L2_CTRL_TYPE_MENU for dual-pipe mode control. (Sakari)
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The UVC video driver converts the timestamp from hardware specific unit
to one known by the kernel at the time when the buffer is dequeued. This
is fine in general, but the streamoff operation consists of the
following steps (among other things):
1. uvc_video_clock_cleanup --- the hardware clock sample array is
released and the pointer to the array is set to NULL,
2. buffers in active state are returned to the user and
3. buf_finish callback is called on buffers that are prepared.
buf_finish includes calling uvc_video_clock_update that accesses the
hardware clock sample array.
The above is serialised by a queue specific mutex. Address the problem
by skipping the clock conversion if the hardware clock sample array is
already released.
Fixes: 9c0863b1cc ("[media] vb2: call buf_finish from __queue_cancel")
Reported-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Tested-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When initially testing the Camera Terminal Descriptor wTerminalType
field (buffer[4]), no mask is used. Later in the function, the MSB is
overloaded to store the descriptor subtype, and so a mask of 0x7fff
is used to check the type.
If a descriptor is specially crafted to set this overloaded bit in the
original wTerminalType field, the initial type check will fail (falling
through, without adjusting the buffer size), but the later type checks
will pass, assuming the buffer has been made suitably large, causing an
overflow.
Avoid this problem by checking for the MSB in the wTerminalType field.
If the bit is set, assume the descriptor is bad, and abort parsing it.
Originally reported here:
https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8
A similar (non-compiling) patch was provided at that time.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As we fallback to use "mediatek,mt7623" for MT7623a, remove unused
root node property "mediatek,mt7623a" in the document.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The SOURCE_CHANGE event is decoder specific, so don't allow it for
encoders.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
It is good practice to fill in the bus_info.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
It is good practice to fill in bus_info.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Check that the selection buf_type is valid before calling get_q_data() to
avoid hitting the WARN(1) in that function if the buffer type is not valid.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+44b24cff6bf96006ecfa@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 2cc1802f62 ("media: vb2: Keep dma-buf buffers mapped until
they are freed") removed code leaving a local variable unused.
Remove it to avoid a compiler warning.
Fixes: 2cc1802f62 ("media: vb2: Keep dma-buf buffers mapped until they are freed")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This reverts commit 3b99ab7dec.
The compatible "mediatek,mt7623a" is useless, so remove it.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
We need to reset MCU and do other initializations on resume otherwise
MT7610U device will fail to initialize, what cause system hung due to
USB requests timeouts.
Patch fixes 4.19 -> 4.20 regression.
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Apply backpressure to hogs that emit requests faster than the GPU can
process them by waiting for their ring to be less than half-full before
proceeding with taking the struct_mutex.
This is a gross hack to apply throttling backpressure, the long term
goal is to remove the struct_mutex contention so that each client
naturally waits, preferably in an asynchronous, nonblocking fashion
(pipelined operations for the win), for their own resources and never
blocks another client within the driver at least. (Realtime priority
goals would extend to ensuring that resource contention favours high
priority clients as well.)
This patch only limits excessive request production and does not attempt
to throttle clients that block waiting for eviction (either global GTT or
system memory) or any other global resources, see above for the long term
goal.
No microbenchmarks are harmed (to the best of my knowledge).
Testcase: igt/gem_exec_schedule/pi-ringfull-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207071829.5574-1-chris@chris-wilson.co.uk
On the Bananapi M3 and Cubietruck Plus, the DC input jacks are wired to
the ACIN pins, which is represented by the AC power supply. Both boards
have connectors for LiPo batteries, which are represented by the battery
power supply.
The H8 Homlet is a set-top box design. The DC input jack is wired to the
ACIN pins, but there are no battery connectors.
Enable these power supplies in the device tree.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Cubieboard4 has a Realtek RTL8211E ethernet PHY which uses RGMII to
talk to the MAC. The PHY is powered by 2 regulators: cldo1 for the PHY's
core logic and gpio1-ldo for I/O. The latter also powers the SoC side
pins. As there is no binding to model a second regulator supply for the
PHY, it is omitted. It is however properly modeled for the PIO.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A80 Optimus has a Realtek RTL8211E ethernet PHY which uses RGMII to
talk to the MAC. The PHY is powered by 2 regulators: cldo1 for the PHY's
core logic and gpio1-ldo for I/O. The latter also powers the SoC side
pins. As there is no binding to model a second regulator supply for the
PHY, it is omitted. It is however properly modeled for the PIO.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The GMAC (gigabit ethernet controller) supports RGMII to connect to
the ethernet PHY, for gigabit network speeds.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A80 has the same GMAC found on the A31 SoC.
Add a device node, and an alias for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A80 has the same DWMAC hardware as on earlier Allwinner SoCs. The
accompanying GMAC clock register has been moved into the "System
Control" area.
Add a clock node for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Cubieboard 4 has the PMIC providing voltage to all the pin-bank
supply rails from its various regulator outputs. All pin-banks that
have supply rails are accounted for. PN pin-bank does not have a
supply rail.
Also remove any "regulator-always-on" properties from regulators that
were only marked to provide pin-bank power.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A80 Optimus has the PMIC providing voltage to all the pin-bank
supply rails from its various regulator outputs. All pin-banks that
have supply rails are accounted for. PN pin-bank does not have a
supply rail.
Also remove any "regulator-always-on" properties from regulators that
were only marked to provide pin-bank power.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The DC1SW output from the AXP809 is unused. Unused regulators should
still be listed so as to be considered to be fully constrained.
Fixes: aa4a27bc81 ("ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and regulators")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
If we have a kernel configured for periodic timer interrupts, and we
have cpuidle enabled, then we end up with CPU1 losing timer interupts
after a hotplug.
This can manifest itself in RCU stall warnings, or userspace becoming
unresponsive.
The problem is that the kernel initially wants to use the TWD timer
for interrupts, but the TWD loses context when we enter the C3 cpuidle
state. Nothing reprograms the TWD after idle.
We have solved this in the past by switching to broadcast timer ticks,
and cpuidle44xx switches to that mode at boot time. However, there is
nothing to switch from periodic mode local timers after a hotplug
operation.
We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one
would expect would take care of the issue, but internally this only
deals with one-shot local timers - tick_broadcast_enable() on the other
hand only deals with periodic local timers. So, we need to call both.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: just standardized the subject line]
Signed-off-by: Tony Lindgren <tony@atomide.com>
dirent modification events (create/delete/move) do not carry the
child entry name/inode information. Instead, we report FAN_ONDIR
for mkdir/rmdir so user can differentiate them from creat/unlink.
This is consistent with inotify reporting IN_ISDIR with dirent events
and is useful for implementing recursive directory tree watcher.
We avoid merging dirent events referring to subdirs with dirent events
referring to non subdirs, otherwise, user won't be able to tell from a
mask FAN_CREATE|FAN_DELETE|FAN_ONDIR if it describes mkdir+unlink pair
or rmdir+create pair of events.
For backward compatibility and consistency, do not report FAN_ONDIR
to user in legacy fanotify mode (reporting fd) and report FAN_ONDIR
to user in FAN_REPORT_FID mode for all event types.
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The bluetooth-keyboard which comes with the Toshiba WT10A tablet uses
a couple of usage codes in the vendor specific ffbc page.
The keyboard has a vendor-id of 04f2 which maps to Chicony.
Other then adding a few keymappings for the ffbc usages, no special
handling is necessary. So rather then adding a new hid-toshiba driver,
this commit adds the ID and 2 extra key-mappings to the hid-topseed
driver. The hid-topseed driver already contains mapping for some
ffbc usages (and does nothing else) and it already binds to another
Chicony manufactured keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxXYaEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkSQH/2yrfnviNPFYpZOR
QQdc71Bfhkd8m85SmWIsSebkxmi3hKFVj15sGbWXd6+0/VxjEEGvQCZpvVwJceke
LwDxtkKGg/74wAqJvlSAWxFNZ+Had4jDeoSoeQChddsBVXBBCxQx2v6ECg3o2x7W
k8Z8t4+3RijDf8fYXY9ETyO2zW8R/wgT+dnl+DPgUH7u4dxh7FzAUfc4bgZIDg+i
FzBQfbTJuz4BU7uRZ9IJiwhWKv0Iyi2DR3BY8Z1pqEpRaUMJMrCs2WGytHbTgt9e
0EtO1airbVneU4eumU/ZaF9cyEbah9HousEPnP7J09WG4s/Odxc4zE+uK1QqS2im
5Xv88is=
=dVd1
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Linux 5.0-rc5
Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to
prepare a base for fbdev-v5.1 changes.
Add support for events with data type FSNOTIFY_EVENT_INODE
(e.g. create/attrib/move/delete) for inode and filesystem mark types.
The "inode" events do not carry enough information (i.e. path) to
report event->fd, so we do not allow setting a mask for those events
unless group supports reporting fid.
The "inode" events are not supported on a mount mark, because they do
not carry enough information (i.e. path) to be filtered by mount point.
The "dirent" events (create/move/delete) report the fid of the parent
directory where events took place without specifying the filename of the
child. In the future, fanotify may get support for reporting filename
information for those events.
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When event data type is FSNOTIFY_EVENT_INODE, we don't have a refernece
to the mount, so we will not be able to open a file descriptor when user
reads the event. However, if the listener has enabled reporting file
identifier with the FAN_REPORT_FID init flag, we allow reporting those
events and we use an identifier inode to encode fid.
The inode to use as identifier when reporting fid depends on the event.
For dirent modification events, we report the modified directory inode
and we report the "victim" inode otherwise.
For example:
FS_ATTRIB reports the child inode even if reported on a watched parent.
FS_CREATE reports the modified dir inode and not the created inode.
[JK: Fixup condition in fanotify_group_event_mask()]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
All fsnotify hooks set the FS_ISDIR flag for events that happen
on directory victim inodes except for fsnotify_perm().
Add the missing FS_ISDIR flag in fsnotify_perm() hook and let
fanotify_group_event_mask() check the FS_ISDIR flag instead of
checking if path argument is a directory.
This is needed for fanotify support for event types that do not
carry path information.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We need to report FS_ISDIR flag with MOVE_SELF and DELETE_SELF events
for fanotify, because fanotify API requires the user to explicitly
request events on directories by FAN_ONDIR flag.
inotify never reported IN_ISDIR with those events. It looks like an
oversight, but to avoid the risk of breaking existing inotify programs,
mask the FS_ISDIR flag out when reprting those events to inotify backend.
We also add the FS_ISDIR flag with FS_ATTRIB event in the case of rename
over an empty target directory. inotify did not report IN_ISDIR in this
case, but it normally does report IN_ISDIR along with IN_ATTRIB event,
so in this case, we do not mask out the FS_ISDIR flag.
[JK: Simplify the checks in fsnotify_move()]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Wrapper around statfs() interface.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
For FAN_REPORT_FID, we need to encode fid with fsid of the filesystem on
every event. To avoid having to call vfs_statfs() on every event to get
fsid, we store the fsid in fsnotify_mark_connector on the first time we
add a mark and on handle event we use the cached fsid.
Subsequent calls to add mark on the same object are expected to pass the
same fsid, so the call will fail on cached fsid mismatch.
If an event is reported on several mark types (inode, mount, filesystem),
all connectors should already have the same fsid, so we use the cached
fsid from the first connector.
[JK: Simplify code flow around fanotify_get_fid()
make fsid argument of fsnotify_add_mark_locked() unconditional]
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When setting up an fanotify listener, user may request to get fid
information in event instead of an open file descriptor.
The fid obtained with event on a watched object contains the file
handle returned by name_to_handle_at(2) and fsid returned by statfs(2).
Restrict FAN_REPORT_FID to class FAN_CLASS_NOTIF, because we have have
no good reason to support reporting fid on permission events.
When setting a mark, we need to make sure that the filesystem
supports encoding file handles with name_to_handle_at(2) and that
statfs(2) encodes a non-zero fsid.
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If group requested FAN_REPORT_FID and event has file identifier,
copy that information to user reading the event after event metadata.
fid information is formatted as struct fanotify_event_info_fid
that includes a generic header struct fanotify_event_info_header,
so that other info types could be defined in the future using the
same header.
metadata->event_len includes the length of the fid information.
The fid information includes the filesystem's fsid (see statfs(2))
followed by an NFS file handle of the file that could be passed as
an argument to open_by_handle_at(2).
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When user requests the flag FAN_REPORT_FID in fanotify_init(),
a unique file identifier of the event target object will be reported
with the event.
The file identifier includes the filesystem's fsid (i.e. from statfs(2))
and an NFS file handle of the file (i.e. from name_to_handle_at(2)).
The file identifier makes holding the path reference and passing a file
descriptor to user redundant, so those are disabled in a group with
FAN_REPORT_FID.
Encode fid and store it in event for a group with FAN_REPORT_FID.
Up to 12 bytes of file handle on 32bit arch (16 bytes on 64bit arch)
are stored inline in fanotify_event struct. Larger file handles are
stored in an external allocated buffer.
On failure to encode fid, we print a warning and queue the event
without the fid information.
[JK: Fold part of later patched into this one to use
exportfs_encode_inode_fh() right away]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The helper is quite trivial and open coding it will make it easier
to implement copying event fid info to user.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
fix incorrect IC name that will affect the MT8183 power dt-bindings
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>