Commit graph

982,081 commits

Author SHA1 Message Date
Andy Shevchenko
278bca7f31 vfio-mdev: Switch to use new generic UUID API
There are new types and helpers that are supposed to be used in new code.

As a preparation to get rid of legacy types and API functions do
the conversion here.

Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-05 11:51:56 -07:00
Ville Syrjälä
39806c3f11 drm/i915: Include register polling in reg_rw traces
We generally omit register polling from the i915_reg_rw tracepoint.
Understandable since polling could generate a lot of noise in the
trace. The downside is that the trace is incomplete. As a compromise
let's trace the final register value observed while polling. That
should be generally sufficient to observe what the code should be
doing next.

I suppose in some cases it might make sense to also trace the initial
register value, and maybe the number of times we polled. But that
would require a separate tracepoint so let's leave it for the future.

The other users of _NOTRACE() are i915_pmu and i2c bitbanging,
which I decided to leave alone.

Next we should do something to claw back the tracepoints for
planes and whatnot which were switched to _FW() a while back.
I guess just new macros for raw_rw+trace. The question is
what to call it?

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204211644.21967-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-02-05 20:44:43 +02:00
Russell King
bf2fa12593 net: marvell: mvpp2: fix lack of link interrupts
Sven Auhagen reports that if he changes a SFP+ module for a SFP module
on the Macchiatobin Single Shot, the link does not come back up.  For
Sven, it is as easy as:

- Insert a SFP+ module connected, and use ping6 to verify link is up.
- Remove SFP+ module
- Insert SFP 1000base-X module use ping6 to verify link is up: Link
  up event did not trigger and the link is down

but that doesn't show the problem for me.  Locally, this has been
reproduced by:

- Boot with no modules.
- Insert SFP+ module, confirm link is up.
- Replace module with 25000base-X module.  Confirm link is up.
- Set remote end down, link is reported as dropped at both ends.
- Set remote end up, link is reported up at remote end, but not local
  end due to lack of link interrupt.

Fix this by setting up both GMAC and XLG interrupts for port 0, but
only unmasking the appropriate interrupt according to the current mode
set in the mac_config() method.  However, only do the mask/unmask
dance when we are really changing the link mode to avoid missing any
link interrupts.

Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05 10:40:28 -08:00
Russell King
4a4cec7257 net: marvell: mvpp2: use phy_interface_mode_is_8023z() helper
Use the phy_interface_mode_is_8023z() helper for detecting interface
modes that use 802.3z serial encoding.  This is equivalent to testing
for both 1000base-X and 2500base-X.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05 10:40:28 -08:00
Bruce Wang
d3db61caf4 drm/msm/dpu: remove struct encoder_kickoff_params
The contents of struct encoder_kickoff_params are never used. Remove the
structure and all remnants of it from function calls.

Changes in v2 (seanpaul):
- Actually remove the struct (Jeykumar)

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-05 13:35:55 -05:00
David S. Miller
7194d92b23 Merge branch 'nixge-Fixed-link-support'
Moritz Fischer says:

====================
nixge: Fixed-link support

This series adds fixed-link support to nixge.

The first patch corrects the binding to correctly reflect
hardware that does not come with MDIO cores instantiated.

The second patch adds fixed link support to the driver.

The third patch updates the binding document with the now
optional (formerly required) phy-handle property and references
the fixed-link docs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05 10:34:34 -08:00
Moritz Fischer
baaac2fb0d dt-bindings: net: Add fixed-link support
Update device-tree binding with fixed-link support.

With fixed-link support the formerly required property 'phy-handle'
is now optional if 'fixed-link' child is present.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05 10:34:34 -08:00
Moritz Fischer
8dc0ae90ad net: nixge: Add support for fixed-link configurations
Add support for fixed-link configurations to nixge driver.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05 10:34:34 -08:00
Moritz Fischer
dd648818da net: nixge: Make mdio child node optional
Make MDIO child optional and only instantiate the
MDIO bus if the child is actually present.

There are currently no (in-tree) users of this
binding; all (out-of-tree) users use overlays that
get shipped together with the FPGA images that contain
the IP.

This will significantly increase maintainabilty
of future revisions of this IP.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05 10:34:34 -08:00
Rajneesh Bhardwaj
d6827015e6 platform/x86: intel_pmc_core: Fix PCH IP name
For Cannonlake and Icelake, the IP name for Res_6 should be SPF i.e.
South Port F. No functional change is intended other than just renaming
the IP appropriately.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 291101f6a7 ("platform/x86: intel_pmc_core: Add CannonLake PCH support")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:55 +02:00
Rajneesh Bhardwaj
0e68eeea98 platform/x86: intel_pmc_core: Fix PCH IP sts reading
A previous commit "platform/x86: intel_pmc_core: Make the driver PCH
family agnostic <c977b98bbe>" provided
better abstraction to this driver but has some fundamental issues.

e.g. the following condition

for (index = 0; index < pmcdev->map->ppfear_buckets &&
	index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)

is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which
is _wrong_ and even though ppfear_buckets is 8, the loop fails to read
all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This
patch refactors the pfear show logic to correctly read PCH IP power
gating status for Cannonlake and beyond.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: c977b98bbe ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:55 +02:00
Rajneesh Bhardwaj
e50af83327 platform/x86: intel_pmc_core: Handle CFL regmap properly
Only Coffeelake should use Cannonlake regmap other than Cannonlake
platform. This allows Coffeelake special handling only when there is no
matching PCI device and default reg map selected as per CPUID is for
Sunrisepoint PCH. This change is needed to enable support for newer SoCs
such as Icelake.

Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 661405bd81 ("platform/x86: intel_pmc_core: Special case for Coffeelake")
Acked-by: "David E. Box" <david.e.box@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:55 +02:00
Hans de Goede
871f1f2bcb platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail
Commit c3b8e884de ("platform/x86: intel_int0002_vgpio: Implement irq_set_wake"),
was written to fix some wakeup issues on Bay Trail (BYT) devices.

We've received a bug report that this causes a suspend regression on some
Cherry Trail (CHT) based devices.

To fix the issues this causes on CHT devices, this commit modifies the
irq_set_wake support so that we only implement irq_set_wake on BYT devices,

Fixes: c3b8e884de ("platform/x86: intel_int0002_vgpio: ... irq_set_wake")
Reported-and-tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:54 +02:00
Anthony Wong
0bbbe97f2f platform/x86: ideapad: Add ideapad 330-15ICH to no_hw_rfkill
Lenovo ideapad 330-15ICH does not have hardware radio switch
but driver wrongly reports all radios as hard-blocked, add
it to no_hw_rfkill to fix it.

BugLink: https://bugs.launchpad.net/bugs/1811815
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:54 +02:00
Kai Renzig
bbb97d728f platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet
Add touchscreen platform data for the Chuwi Hi8 Air tablet.

Signed-off-by: Kai Renzig <k.renzig@gmail.com>
[andy: fixed driver name and rewrote subject]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 20:28:18 +02:00
Greg Kroah-Hartman
ab1ab0eb0c drm/i915: do not return invalid pointers as a *dentry
When calling debugfs functions, they can now return error values if
something went wrong.  If that happens, return a NULL as a *dentry to
the relay core instead of passing it an illegal pointer.

The relay core should be able to handle an illegal pointer, but add this
check to be safe.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131131507.GA19807@kroah.com
2019-02-05 09:45:28 -08:00
Rodrigo Vivi
b2ae318acd drm/i915: Rename HAS_GMCH
First of all GMCH can be considered a feature by itself
since it is a chip present in some platforms that connects
the IA processor to memory and other components in PC.

Also with the introduction of display block at device info,
we got a redundant definition:

.display.has_gmch_display = 1,

So, let's clean up things a bit and use the standardized
way of has_feature on displays side.

No functional change and no manual interaction to generate
this patch.

It is only:

sed -si -e 's/has_gmch_display/has_gmch/g' \
    	-e 's/HAS_GMCH_DISPLAY/HAS_GMCH/g' drivers/gpu/drm/i915/*{c,h}

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204222538.15842-1-rodrigo.vivi@intel.com
2019-02-05 09:43:23 -08:00
Hans de Goede
8335ebc1e9 platform/x86: touchscreen_dmi: Add info for the PoV Wintab P1006w (v1.0) tablet
Add touchscreen info for the Point of View Wintab P1006w (v1.0) tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 19:38:20 +02:00
Kai-Heng Feng
38f250b7d4 platform/x86: dell-wmi: Ignore new keyboard backlight change event
There's a new wmi event generated by dell-wmi when pressing keyboard
backlight hotkey:
[ 3285.474172] dell_wmi: Unknown key with type 0x0010 and code 0x003f pressed

This event is for notification purpose, let's ignore it. The keyboard
backlight hotkey uses another event so it still works without event
0x3f.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 19:38:20 +02:00
Hans de Goede
96f984d312 ACPI / scan: Create platform device for BSG2150 ACPI nodes
The Point of View TAB-P1006W-232-3G tablet has an ACPI firmware node with
a HID of BSG2150 describing the 2 Bosch sensors used in the device a
BMC150 compatible accelerometer and a BMC150 compatible magnetometer.

The ACPI firmware node actually contains 3 I2cSerialBusV2 resources,
but this seems to be a copy and paste job from the BSG1160 firmware node
on other devices, since there is no i2c-client listening to the 0x68
address listed in the third resource and the 0x68 address is identical
to the address of the third resource in the BSG1160 nodes, where as the
other 2 addresses are different.

Add the ID to the I2C multi instantiate list, so that the
i2c-multi-instantiate.c driver can handle it;

And add the necessary info to the i2c-multi-instantiate.c driver to
enumerate all I2C slaves correctly.

To avoid triggering the:

        if (i < multi->num_clients) {
                dev_err(dev, "Error finding driver, idx %d\n", i);

Error this commit lists the 3th device in the i2c_inst_data with a
type of "bsg2150_dummy_dev".

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-05 19:38:20 +02:00
Stephen Smalley
45189a1998 selinux: fix avc audit messages
commit a2c513835b ("selinux: inline some AVC functions used only once")
introduced usage of audit_log_string() in place of audit_log_format()
for fixed strings.  However, audit_log_string() quotes the string.
This breaks the avc audit message format and userspace audit parsers.
Switch back to using audit_log_format().

Fixes: a2c513835b ("selinux: inline some AVC functions used only once")
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-05 12:34:33 -05:00
Chris Wilson
21950ee7cc drm/i915: Pull i915_gem_active into the i915_active family
Looking forward, we need to break the struct_mutex dependency on
i915_gem_active. In the meantime, external use of i915_gem_active is
quite beguiling, little do new users suspect that it implies a barrier
as each request it tracks must be ordered wrt the previous one. As one
of many, it can be used to track activity across multiple timelines, a
shared fence, which fits our unordered request submission much better. We
need to steer external users away from the singular, exclusive fence
imposed by i915_gem_active to i915_active instead. As part of that
process, we move i915_gem_active out of i915_request.c into
i915_active.c to start separating the two concepts, and rename it to
i915_active_request (both to tie it to the concept of tracking just one
request, and to give it a longer, less appealing name).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-5-chris@chris-wilson.co.uk
2019-02-05 17:20:11 +00:00
Chris Wilson
5f5c139d69 drm/i915: Allocate active tracking nodes from a slabcache
Wrap the active tracking for a GPU references in a slabcache for faster
allocations, and hopefully better fragmentation reduction.

v3: Nothing device specific left, it's just a slabcache that we can
make global.
v4: Include i915_active.h and don't put the initfunc under DEBUG_GEM

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-4-chris@chris-wilson.co.uk
2019-02-05 17:17:34 +00:00
Fabrizio Castro
2e2b7615e3 dt-bindings: PCI: rcar: Add device tree support for r8a774c0
Add PCIe support for the RZ/G2E (a.k.a. R8A774C0).

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-05 17:16:29 +00:00
Chris Wilson
a42375af0a drm/i915: Release the active tracker tree upon idling
As soon as we detect that the active tracker is idle and we prepare to
call the retire callback, release the storage for our tree of
per-timeline nodes. We expect these to be infrequently used and quick
to allocate, so there is little benefit in keeping the tree cached and
we would prefer to return the pages back to the system in a timely
fashion.

This also means that when we finalize the struct as a whole, we know as
the activity tracker must be idle, the tree has already been released.
Indeed we can reduce i915_active_fini() just to the assertions that there
is nothing to do.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-3-chris@chris-wilson.co.uk
2019-02-05 17:14:33 +00:00
Chris Wilson
64d6c500a3 drm/i915: Generalise GPU activity tracking
We currently track GPU memory usage inside VMA, such that we never
release memory used by the GPU until after it has finished accessing it.
However, we may want to track other resources aside from VMA, or we may
want to split a VMA into multiple independent regions and track each
separately. For this purpose, generalise our request tracking (akin to
struct reservation_object) so that we can embed it into other objects.

v2: Tweak error handling during selftest setup.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-2-chris@chris-wilson.co.uk
2019-02-05 17:12:00 +00:00
Chandan Uddaraju
45815d0962 drm: add definitions for DP Audio/Video compliance tests
This change adds definitions needed for DP audio compliance testing.
It also adds missing definition for DP video compliance.

Changes in V2:
-- Delete cover letter for this patch.
-- Move the description from cover letter into patch commit message.
-- Remove DPU from subject prefix

Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # for merging through -msm.
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-05 11:46:40 -05:00
Udo Eberhardt
3bff2407fb ALSA: usb-audio: Add support for new T+A USB DAC
This patch adds the T+A VID to the generic check in order to enable
native DSD support for T+A devices. This works with the new T+A USB
DAC model SD3100HV and will also work with future devices which
support the XMOS/Thesycon style DSD format.

Signed-off-by: Udo Eberhardt <udo.eberhardt@thesycon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-05 17:21:55 +01:00
Chris Wilson
a21f453c73 drm/i915/selftests: Exercise some AB...BA preemption chains
Build a chain using 2 contexts (A, B) then request a preemption such
that a later A request runs before the spinner in B.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205123835.25331-1-chris@chris-wilson.co.uk
2019-02-05 16:16:02 +00:00
Daniel Borkmann
90d304b7f7 Merge branch 'bpf-riscv-jit'
Björn Töpel says:

====================
This v2 series adds an RV64G BPF JIT to the kernel.

At the moment the RISC-V Linux port does not support
CONFIG_HAVE_KPROBES (Patrick Stählin sent out an RFC last year), which
means that CONFIG_BPF_EVENTS is not supported. Thus, no tests
involving BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT,
BPF_PROG_TYPE_KPROBE and BPF_PROG_TYPE_RAW_TRACEPOINT passes.

The implementation does not support "far branching" (>4KiB).

Test results:
  # modprobe test_bpf
  test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed]

  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier
  ...
  Summary: 761 PASSED, 507 SKIPPED, 2 FAILED

Note that "test_verifier" was run with one build with
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise
many of the the tests that require unaligned access were skipped.

CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y:
  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier | grep -c 'NOTE.*unknown align'
  0

No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS:
  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier | grep -c 'NOTE.*unknown align'
  59

The two failing test_verifier tests are:
  "ld_abs: vlan + abs, test 1"
  "ld_abs: jump around ld_abs"

This is due to that "far branching" involved in those tests.
All tests where done on QEMU emulator version 3.1.50
(v3.1.0-688-g8ae951fbc106). I'll test it on real hardware, when I get
access to it.

I'm routing this patch via bpf-next/netdev mailing list (after a
conversation with Palmer at FOSDEM), mainly because the other JITs
went that path.

Again, thanks for all the comments!

Cheers,
Björn

v1 -> v2:
* Added JMP32 support. (Daniel)
* Add RISC-V to Documentation/sysctl/net.txt. (Daniel)
* Fixed seen_call() asymmetry. (Daniel)
* Fixed broken bpf_flush_icache() range. (Daniel)
* Added alignment annotations to some selftests.

RFCv1 -> v1:
* Cleaned up the Kconfig and net/Makefile. (Christoph)
* Removed the entry-stub and squashed the build/config changes to be
  part of the JIT implementation. (Christoph)
* Simplified the register tracking code. (Daniel)
* Removed unused macros. (Daniel)
* Added myself as maintainer and updated documentation. (Daniel)
* Removed HAVE_EFFICIENT_UNALIGNED_ACCESS. (Christoph, Palmer)
* Added tail-calls and cleaned up the code.
====================

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 17:03:02 +01:00
Linus Walleij
ab3ab7b654 mtd: rawnand: fsmc: Disable NAND on remove()
This disables the NAND on remove() and the errorpath,
making sure the chipselect gets deasserted when the
NAND is not in use.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:12 +01:00
Linus Walleij
30c72ab142 mtd: rawnand: fsmc: Reset NAND timings on resume()
When we go through a suspend/resume cycle the NAND
timings and other settings may have been lost so reset
the chip to bring it up in a known working state.

The FSMC only supports single CS chips so we only need
to call nand_reset(chip, 0).

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:12 +01:00
Stefan Roese
c40c7a990a mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG
Add support for GigaDevice GD5F1GQ4UExxG SPI NAND chip.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:12 +01:00
Masahiro Yamada
7a10a92f12 mtd: rawnand: denali: remove unused dma_addr field from denali_nand_info
This is a leftover of commit 997cde2a22 ("mtd: nand: denali: skip
driver internal bounce buffer when possible").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:11 +01:00
Masahiro Yamada
a8fce9fe2c mtd: rawnand: denali: remove unused function argument 'raw'
This argument is not used at all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:11 +01:00
Masahiro Yamada
4b3ee71be0 mtd: rawnand: denali: remove unneeded denali_reset_irq() call
This code was added by commit 26d266e10e ("mtd: nand: denali: fix
raw and oob accessors for syndrome page layout"), but I do not see
sensible reason.

The IRQ flags are correctly reset by denali_cmd_ctrl(), so this code
is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:11 +01:00
Masahiro Yamada
f9ffb406d3 mtd: rawnand: check return code of nand_reset() and nand_readid_op()
nand_scan_ident() iterates over maxchips to find as many homogeneous
chips as possible.

Since commit 2d472aba15 ("mtd: nand: document the NAND
controller/NAND chip DT representation"), new drivers should pass in
the exact number of CS lines instead of possible max, but old
platforms may still rely on nand_scan_ident() to detect the actual
number of connected CS lines.

In that case, this loop bails out when manufacturer or device ID
unmatches. The reason of unmatch is most likely no chip is connected
to that CS line. If so, nand_reset() should already have failed,
and the following nand_readid_op() is pointless.

Before ->exec_op hook was introduced, drivers had no way to tell
the failure of NAND_CMD_RESET to the framework because the legacy
->cmdfunc() has void return type. Now drivers implementing ->exec_op
hook can return the error code. You can save nand_readid_op() by
checking the return value of nand_reset(). The return value of
nand_readid_op() should be checked as well. If it fails, probably
id[0] and id[1] are undefined values.

Just for consistency, it should be sensible to check the return
code in nand_do_write_oob() as well.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:11 +01:00
Masahiro Yamada
2d73f3d66b mtd: rawnand: remove ->legacy.erase and single_erase()
Now that the last user of this hook, denali.c, stopped using it,
we can remove the erase hook from nand_legacy.

I squashed single_erase() because only the difference between
single_erase() and nand_erase_op() is the number of bit shifts.

The status/ret conversion in nand_erase_nand() is unneeded since
commit eb94555e9e ("mtd: nand: use usual return values for the
->erase() hook"). Cleaned it up now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:11 +01:00
Björn Töpel
e2c6f50e48 selftests/bpf: add "any alignment" annotation for some tests
RISC-V does, in-general, not have "efficient unaligned access". When
testing the RISC-V BPF JIT, some selftests failed in the verification
due to misaligned access. Annotate these tests with the
F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag.

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 16:56:10 +01:00
Masahiro Yamada
d4ea6ed022 mtd: rawnand: denali: remove ->erase hook
Commit f9ebd1bb41 ("mtd: rawnand: Deprecate ->erase()") discouraged
the use of this hook, so I am happy to follow the suggestion.

Although the Denali IP provides a special MAP10 command for erasing,
using it would not buy us much. The Denali IP actually works with the
generic erasing by single_erase() + ->cmdfunc hook (nand_command_lp)
+ ->cmd_ctrl hook (denali_cmd_ctrl).

This method is also deprecated, but denali_erase() can go away
irrespective of ->exec_op conversion.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:10 +01:00
Björn Töpel
e8cb0167ae bpf, doc: add RISC-V JIT to BPF documentation
Update Documentation/networking/filter.txt and
Documentation/sysctl/net.txt to mention RISC-V.

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 16:56:10 +01:00
Mathieu Malaterre
3175e12183 mtd: rawnand: Annotate implicit fall through in nand_scan_tail
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1).

This commit removes the following warnings:

  drivers/mtd/nand/raw/nand_base.c:5556:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
  drivers/mtd/nand/raw/nand_base.c:5575:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
  drivers/mtd/nand/raw/nand_base.c:5613:13: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:10 +01:00
Björn Töpel
8a9e0aff88 MAINTAINERS: add RISC-V BPF JIT maintainer
Add Björn Töpel as RISC-V BPF JIT maintainer.

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 16:56:10 +01:00
Mathieu Malaterre
5b15f8650b mtd: rawnand: Annotate implicit fall through in nand_command/nand_command_lp
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1).

This commit removes the following warnings:

  drivers/mtd/nand/raw/nand_legacy.c:332:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
  drivers/mtd/nand/raw/nand_legacy.c:483:3: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:10 +01:00
Björn Töpel
2353ecc6f9 bpf, riscv: add BPF JIT for RV64G
This commit adds a BPF JIT for RV64G.

The JIT is a two-pass JIT, and has a dynamic prolog/epilogue (similar
to the MIPS64 BPF JIT) instead of static ones (e.g. x86_64).

At the moment the RISC-V Linux port does not support
CONFIG_HAVE_KPROBES, which means that CONFIG_BPF_EVENTS is not
supported. Thus, no tests involving BPF_PROG_TYPE_TRACEPOINT,
BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_KPROBE and
BPF_PROG_TYPE_RAW_TRACEPOINT passes.

The implementation does not support "far branching" (>4KiB).

Test results:
  # modprobe test_bpf
  test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed]

  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier
  ...
  Summary: 761 PASSED, 507 SKIPPED, 2 FAILED

Note that "test_verifier" was run with one build with
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise
many of the the tests that require unaligned access were skipped.

CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y:
  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier | grep -c 'NOTE.*unknown align'
  0

No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS:
  # echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
  # ./test_verifier | grep -c 'NOTE.*unknown align'
  59

The two failing test_verifier tests are:
  "ld_abs: vlan + abs, test 1"
  "ld_abs: jump around ld_abs"

This is due to that "far branching" involved in those tests.

All tests where done on QEMU (QEMU emulator version 3.1.50
(v3.1.0-688-g8ae951fbc106)).

Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 16:56:10 +01:00
Yoshio Furuyama
db214513f6 mtd: spinand: Add support for all Toshiba Memory products
Add device table for Toshiba Memory products.
Also, generalize OOB layout structure and function names.

Signed-off-by: Yoshio Furuyama <tmcmc-mb-yfuruyama7@ml.toshiba.co.jp>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:10 +01:00
Jianxin Pan
0f416a463e MAINTAINERS: Add entry for Amlogic NAND controller driver
Add entry for Amlogic NAND controller driver and its bindings[0].

[0] https://lore.kernel.org/lkml/1547566684-57472-1-git-send-email-jianxin.pan@amlogic.com/

Signed-off-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:10 +01:00
Liang Yang
8fae856c53 mtd: rawnand: meson: add support for Amlogic NAND flash controller
Add initial support for the Amlogic NAND flash controller which is
available on Meson SoCs.

Signed-off-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05 16:56:09 +01:00
Daniel Borkmann
31de389707 Merge branch 'bpf-btf-dedup'
Andrii Nakryiko says:

====================
This patch series adds BTF deduplication algorithm to libbpf. This algorithm
allows to take BTF type information containing duplicate per-compilation unit
information and reduce it to equivalent set of BTF types with no duplication without
loss of information. It also deduplicates strings and removes those strings that
are not referenced from any BTF type (and line information in .BTF.ext section,
if any).

Algorithm also resolves struct/union forward declarations into concrete BTF types
across multiple compilation units to facilitate better deduplication ratio. If
undesired, this resolution can be disabled through specifying corresponding options.

When applied to BTF data emitted by pahole's DWARF->BTF converter, it reduces
the overall size of .BTF section by about 65x, from about 112MB to 1.75MB, leaving
only 29247 out of initial 3073497 BTF type descriptors.

Algorithm with minor differences and preliminary results before FUNC/FUNC_PROTO
support is also described more verbosely at:

https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html

v1->v2:
- rebase on latest bpf-next
- err_log/elog -> pr_debug
- btf__dedup, btf__get_strings, btf__get_nr_types listed under 0.0.2 version
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 16:52:58 +01:00
Andrii Nakryiko
9c65112744 selftests/btf: add initial BTF dedup tests
This patch sets up a new kind of tests (BTF dedup tests) and tests few aspects of
BTF dedup algorithm. More complete set of tests will come in follow up patches.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-05 16:52:57 +01:00