Commit graph

982,081 commits

Author SHA1 Message Date
Dan Williams
d5d30d5a5c libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family
As Dexuan reports the NVDIMM_FAMILY_HYPERV platform is incompatible with
the existing Linux namespace implementation because it uses
NSLABEL_FLAG_LOCAL for x1-width PMEM interleave sets. Quirk it as an
platform / DIMM that does not provide BLK-aperture access. Allow the
libnvdimm core to assume no potential for aliasing. In case other
implementations make the same mistake, provide a "noblk" module
parameter to force-enable the quirk.

Link: https://lkml.kernel.org/r/PU1P153MB0169977604493B82B662A01CBF920@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-02 16:35:26 -08:00
Linus Torvalds
12491ed354 A single fix for building DT bindings in-tree.
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlxVtl0QHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw7wHD/4qMBS9JpAki/RV3Y9NN/FwWRYC4HS59K7s
 XnCt0oQBdGeiu6hxEaZLsUMurIxsfP87YE6sM9iwiE1JqwKnPl8727BNMd8AGeGP
 dT0Q8MXY/VYksegw+IG2E2L7ILAh2TDuHBt5t8ZKFgAzxvebVo9Cjj/hCp/c9j4l
 AUAONZ/sSvyl/ejmkQWTuJpA1ns+GN/OUzHgiNytGat/1gfcNaiKJlZxChVdN7SX
 Vqwxoih/J44LYQibUEIM/WyeNwqfEA440bI0xxoIVomfEH1lV3RNmXg2lrmZrdgi
 yax9+iUzH81wzWOIlWYYLV06bqt77wyxUTOMA4thFH5pXoI9FoH4IvqC+W75Z4xN
 DSQ9rSz7Gx5uDa01ttWI5kiFMcWVqPSuzsx+6dzpmJWII5WPEqSGFA3WniiJe+fG
 pc/s2xNVXQxhvfXi+WSjFZBxv7cKtvBtIOi2oOLlmOy4MDu1BiJ8St3+1eMv4laN
 7/ZmyDMVhIL45cRn28rLZ0NZY5340nit6QcihOwpQ9LElBXPOQ1NVTEjtNlw6SPd
 RHhYIF4bVGuJKYaIB8aU4QobIKIsL0rHfr2NY0xnJNzcJ02Jr+dv1brX6Nqd9msH
 ybnQByAIBG5zrxQPZvik5v4BxEHr4JPITUrxNLkP1HNc7/Vq0HBcCJjsw/ruRLQi
 67/Zo8Ijvg==
 =cHtH
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree fix from Rob Herring:
 "A single fix for building DT bindings in-tree"

* tag 'devicetree-fixes-for-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix dt_binding_check target for in tree builds
2019-02-02 10:34:32 -08:00
Linus Torvalds
74b13e7efe RISC-V Fixes for 5.0-rc5
This patch set contains a handful of mostly-independent patches:
 
 * A patch that causes our port to respect TIF_NEED_RESCHED, which fixes
   CONFIG_PREEMPT=y kernels.
 * A fix to avoid double-put on OF nodes.
 * Fix a misspelling of target in our Kconfig.
 * Generic PCIe is enabled in our defconfig.
 * A fix to our SBI early console to properly handle line endings.
 * A fix such that max_low_pfn is counted in PFNs.
 * A change to TASK_UNMAPPED_BASE to match what other arches do.
 
 This has passed by standard "boot Fedora" flow.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlxR5B4THHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQf7aEACfy+2EHqgTo5lzRZCwxmjzb4rm5gyH
 1GuR+2NPiwjPADxCqpO7tLFwSoLWU46K7GKfTrjXWbW2hNfBiHfPv62mPSX7dWR0
 kbUMRK0z5qm4mE1K8mmDFWPntGchuuRz1rfPI2Dv8McVybz2MbrvlrJ3zXXK/Qcu
 07cWbmeGd2RWIfj+tSYo+i5Aq4VPWQ6X00ToZlIZ4/4v69mFVgjqTIcc3Jx7unt1
 vGFRjP8jDVibwFAE1yDcUl9OCxqW/wUuwTpPW2HgN+55dktjBxvESl/pMl0AeGYk
 ehKdsaBVk/BkQT2XkYDIPxqK4Yb0VsuPOoH0Jsj+l3tSGjSeRA/LwlHiY7hALIVj
 LTg2FvEKs++hLnzwV6D5Qqj8TcdowSm/hDJttjEewM+IhLPOVGLz16yRcM9jIC7E
 1Jc6ByTo6HgVxhasF/ehT5SowJc1nOR3nS9VVd2P0yYysdN0m/kcfSgxQ1GoXMmC
 2tnMlwJO7pm8akuV2ifxUsM6KlRP47auLtTbRxuebpYnd6YKng7NRLF8Um2tgck4
 wtULBEXZCLYhHB55Lyy+wWDr7Pi3XK7qyvoTNP+AEJHcPtI23TsGKzB0Hu2unvxE
 s9r+0NGuiiuLAsR6Jba9FFSeZR7mJ9u1Bm0fz89Ob6dr1lYf0UUjqqQfHTfVZr40
 F7SqTyD+pe7IoQ==
 =Z3YY
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of mostly-independent patches:

   - make our port respect TIF_NEED_RESCHED, which fixes
     CONFIG_PREEMPT=y kernels

   - fix double-put of OF nodes

   - fix a misspelling of target in our Kconfig

   - generic PCIe is enabled in our defconfig

   - fix our SBI early console to properly handle line
     endings

   - fix max_low_pfn being counted in PFNs

   - a change to TASK_UNMAPPED_BASE to match what other
     arches do

  This has passed my standard 'boot Fedora' flow"

* tag 'riscv-for-linus-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  riscv: Adjust mmap base address at a third of task size
  riscv: fixup max_low_pfn with PFN_DOWN.
  tty/serial: use uart_console_write in the RISC-V SBL early console
  RISC-V: defconfig: Add CRYPTO_DEV_VIRTIO=y
  RISC-V: defconfig: Enable Generic PCIE by default
  RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX}
  RISC-V: Kconfig: fix spelling mistake "traget" -> "target"
  RISC-V: asm/page.h: fix spelling mistake "CONFIG_64BITS" -> "CONFIG_64BIT"
  RISC-V: fix bad use of of_node_put
  RISC-V: Add _TIF_NEED_RESCHED check for kernel thread when CONFIG_PREEMPT=y
2019-02-02 10:26:14 -08:00
Linus Torvalds
c8864cb70f for-linus-20190202
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlxVxeIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpq35EADCoVRFF8mi7wBhNvfN/yLqC9sgnqJM7vF3
 gPpm/E4MsTzCXrhgRmulrikfM8ywOT5ZBgIQp+BrhQgDZIlJ9fcyinFjU7o/gRm5
 R32IMJ4o7uh+YKWQyRSQu1WCaF3hvbNGUT7duMfTKjZ6t9TxTBgy46wYhb7YmNAP
 Ur8C1+4NfF/aHp59n6COM70KdYfswRxtgdEHGfmHAbmKDpvAeC+7I2LPpjTf5bH/
 YULnxk5sQFvCINDJH4zprZ0lSDy+63qk+Q1xxqpFNR1tnmRIVNvKhPPB5xfRLvzB
 mw3JdtwnvoY8Yv6eCs0u7mZs5L3I8zTI+4RtHH9nPD7ykIiUHpejgaRc4TGy2tox
 Dpgfc/Nvdsscpuy4QcFNHbWWBUu5pa5Li+KVS0FEP9FmD5UhcvVmZaZK+V6NuGO4
 9G9wraASFasPK7I0FMHlWLMIWKdj4s4n/H55QnP6yvFsnsrFaqnDwybUFiicjFkv
 hmNQmq8+5p0n3ZBVGQ/SI//vPUjuaFUKU2MhhW0NVz+KkgmEnOJ+W+C77//U33l+
 zhBURtdlnqfImFejEayhhtCtMATJcf2E1rHlA3nM6JyVWMRvQR6asb78QhAKZd6w
 el7rqRdWMwryUYFaROVurfOBMPFdhhyDB1qrOzAZIkhFqWwM9GX6+MH/y8+00HSA
 aA/rXg/daw==
 =8Zz+
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20190202' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this release. This contains:

   - MD pull request from Song, fixing a recovery OOM issue (Alexei)

   - Fix for a sync related stall (Jianchao)

   - Dummy callback for timeouts (Tetsuo)

   - IDE atapi sense ordering fix (me)"

* tag 'for-linus-20190202' of git://git.kernel.dk/linux-block:
  ide: ensure atapi sense request aren't preempted
  blk-mq: fix a hung issue when fsync
  block: pass no-op callback to INIT_WORK().
  md/raid5: fix 'out of memory' during raid cache recovery
2019-02-02 10:16:28 -08:00
Linus Torvalds
3cde55ee79 SCSI fixes on 20190201
Five minor bug fixes.  The libfc one is a tiny memory leak, the zfcp
 one is an incorrect user visible parameter and the rest are on error
 legs or obscure features.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXFTUrCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe/hAQCDic6S
 FcD8TPv4jAt3qWun5vVCFAGCEuGet73p89sxpQEA51KcGrFjR9oCtZkd9nIzJL7M
 enGaQ0RtT8wPMSUNklE=
 =t6p4
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Five minor bug fixes.

  The libfc one is a tiny memory leak, the zfcp one is an incorrect user
  visible parameter and the rest are on error legs or obscure features"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: 53c700: pass correct "dev" to dma_alloc_attrs()
  scsi: bnx2fc: Fix error handling in probe()
  scsi: scsi_debug: fix write_same with virtual_gb problem
  scsi: libfc: free skb when receiving invalid flogi resp
  scsi: zfcp: fix sysfs block queue limit output for max_segment_size
2019-02-02 10:12:53 -08:00
Linus Torvalds
b9de6efed2 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "24 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
  autofs: fix error return in autofs_fill_super()
  autofs: drop dentry reference only when it is never used
  fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
  mm: migrate: don't rely on __PageMovable() of newpage after unlocking it
  psi: clarify the Kconfig text for the default-disable option
  mm, memory_hotplug: __offline_pages fix wrong locking
  mm: hwpoison: use do_send_sig_info() instead of force_sig()
  kasan: mark file common so ftrace doesn't trace it
  init/Kconfig: fix grammar by moving a closing parenthesis
  lib/test_kmod.c: potential double free in error handling
  mm, oom: fix use-after-free in oom_kill_process
  mm/hotplug: invalid PFNs from pfn_to_online_page()
  mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages
  psi: fix aggregation idle shut-off
  mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone
  mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone
  oom, oom_reaper: do not enqueue same task twice
  mm: migrate: make buffer_migrate_page_norefs() actually succeed
  kernel/exit.c: release ptraced tasks before zap_pid_ns_processes
  x86_64: increase stack size for KASAN_EXTRA
  ...
2019-02-02 09:32:58 -08:00
Florian Fainelli
c4ba5268e7 This pull request brings in the arm64 reference for Raspberry Pi 3 A+.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcVMqpAAoJEFXEMs9xUwyNIiEP/jOOzLlwXnDZkPts/ophdtrS
 WOHqpPR5orl486tVSBlQslMNv1bfL2PVhV4mgJ67x0vFGcWcVc0MjV1qKltpBI1g
 6GPv3fMgEZ+hUGfkrwqlNuA6KMDa2yUXiXM5VAujvowuaIOBRQ3EcnUgpjjnruTZ
 da8EmVCXWzNuzUUVVDIwNiER2Q5Uen4UrRjXaVHkRjGhcQ6lv0RPRljEDwZOQVfr
 8Ecyn0SvwGsojbd28Wku5/0DENWGAKFkEHglL2/A2isHKMoEskIKidPiy5CWizvA
 P7rROanXgXZy2lDjYeXjz/k8PGFC1vlttZ18dBIXorlViy1da8f3+OoL6M+60XKC
 RrVki+W4b6zDuzcVlYtqoPH7BDTSzSx+uEz8CzcB4uuQUUBm6tn8B+Yk5X3acuez
 7CHR8uP6t2C1FVVFpPlFHhYuwsfrCIGp7C5Yknxz1Or/ztZzZ8OU0iBvKnBs5A1A
 vo8pzX98WpGoSM4Z+6SpW69aQt2PrhO+4l7eAfqOrs2jcdcBMlUcTMz0GPJD5WD+
 nRIuZipKvlKnbmgi/sHDS9HqPTXVUGrXUhFkUkjZbHERZNVufKfcMCyFMGgDDHhM
 iE+bbqQXA5MuvvMcCcYwbmSskd/vevZF8Xb9zqqPnKU7E9oS/BIzt4CtbyQsJ5dz
 6a4JhrzdKZDfZVhS8My8
 =fjMq
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlxV0XAACgkQh9CWnEQH
 BwT0Kg//Rkc2e5QRLcRmIOhBUimXslxO3yuTFm3yMvBG949WEpLApTuV5j01eqaP
 79yAPS/5V1ME/7re4i1aUtEcar4DNRU0JL4ibbSehL33iiVwPOLVqgts9hdeRE9e
 ShNwjah9bHhxIh7MXK01nQUAz8lvvhSKxHMPL7Gly43QvzjvhRRz+1WmlX+J6zIf
 SutLWZoiBMfxnYhsFcHciRcHjcRe/qucaMup5iBc2qpNtDmr3TuCocMAxIRvk/9x
 dGwmqv0fcUnROBl1WASqTN9TkBiN1GIQTFyL52S0i2A+kA/Je+DWZNH0mdoEj+YZ
 FElkSoLy/pIXWcs6ZPtlWIMNqHxj1QHGz8MEO3Rpitju+wXPVBp9k4l96V8qfVyQ
 8zTJsljeV8gLfQpJc6jYD8XJDxJEROBeK9QcVIU+kv/0ht5n2uuiY2eZDosJAG3/
 LLDoHysKtwWmeQbKISESk+dndmhl6OCGbJGalukkq5jB9GqlVD/IXD/kVsNqVmPi
 EPeeQuq9qEfdOAuTlDwEgb+Cc0W6HmYZ4+Op9QxFRt3EhOX4UBmCj3IKNl7v0q40
 VzKIdWGL+BcPjr5JEbstzrZmd8eMijtEZi+MOs/OGIqtcKlna8v1LyL+LcEfW4t5
 tQaQ0FSXpCtw/Ji9SKpLofHMQCJaRXNT/flaxqdtpIOd7FBPhSs=
 =aQFS
 -----END PGP SIGNATURE-----

Merge tag 'tags/bcm2835-dt-64-next-2019-02-01' into devicetree-arm64/next

This pull request brings in the arm64 reference for Raspberry Pi 3 A+.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-02-02 09:20:38 -08:00
Tomasz Duszynski
3fa30bf700 iio: chemical: sps30: remove printk format specifier
pr_fmt is used by printk wrappers. There are not any in the driver
code so remove the format specifier.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 17:08:06 +00:00
Beniamin Bia
8e8040c52e staging: iio: frequency: ad9833: Load clock using clock framework
The clock frequency is loaded from device-tree using clock framework
instead of statically value. The change allow configuration of
the device via device-trees and better initialization sequence.
This is part of broader effort to add device-tree support to this driver
and take it out from staging.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 17:06:49 +00:00
Jerome Brunet
889c2b7ec4 clk: meson: rework and clean drivers dependencies
Initially, the meson clock directory only hosted 2 controllers drivers,
for meson8 and gxbb. At the time, both used the same set of clock drivers
so managing the dependencies was not a big concern.

Since this ancient time, entropy did its job, controllers with different
requirement and specific clock drivers have been added. Unfortunately, we
did not do a great job at managing the dependencies between the
controllers and the different clock drivers. Some drivers, such as
clk-phase or vid-pll-div, are compiled even if they are useless on the
target (meson8). As we are adding new controllers, we need to be able to
pick a driver w/o pulling the whole thing.

The patch aims to clean things up by:
* providing a dedicated CONFIG_ for each clock drivers
* allowing clock drivers to be compiled as a modules, if possible
* stating explicitly which drivers are required by each controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-02 17:43:32 +01:00
Jerome Brunet
cb78ba7629 clk: meson: axg-audio does not require syscon
The axg audio clock controller uses regmap mmio, not syscon.

Fixes: 1cd5018175 ("clk: meson: axg: add the audio clock controller driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-4-jbrunet@baylibre.com
2019-02-02 17:43:08 +01:00
Jerome Brunet
6e47b53073 clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
Use CONFIG_ARCH_MESON to let make enter the meson clock directory.
As part of a rework, CONFIG_COMMON_CLK_AMLOGIC is about to be removed.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-3-jbrunet@baylibre.com
2019-02-02 17:42:50 +01:00
Jerome Brunet
12aa377bf8 clk: export some clk_hw function symbols for module drivers
clk-provider.h provides clk_hw_is_prepared(), clk_hw_is_enabled() and
clk_hw_is_prepared() but these symbols are not exported for the
modules which prevents a clock driver using them to be compiled as
a module. Export them to fix the problem.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-2-jbrunet@baylibre.com
2019-02-02 17:42:02 +01:00
David S. Miller
a68a848135 Merge branch 'hns3-next'
Huazhong Tan says:

====================
code optimizations & bugfixes for HNS3 driver

This patchset includes bugfixes and code optimizations for the HNS3
ethernet controller driver
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:09 -08:00
liuzhongzhu
54a395b63e net: hns3: MAC table entry count function increases operation 0 value protection measures
When updating the available MAC VLAN table counts,
MAC VLAN table entry count function adds
operation 0 value protection measures.

Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:09 -08:00
liuzhongzhu
6104ca87e1 net: hns3: modify the upper limit judgment condition
In order to prevent the variable anomaly from being larger than desc_num,
the upper limit judgment condition becomes >=.

Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:09 -08:00
Jian Shen
77af09c678 net: hns3: don't allow user to change vlan filter state
When user disables vlan filter, and adds vlan device, it won't
notify the driver the update the vlan filter. In this case, when
user enables vlan filter again, the packets with new vlan tag
will be filtered by vlan filter.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:09 -08:00
liuzhongzhu
f9f07091b4 net: hns3: optimize the maximum TC macro
Multiple macros with the largest number of TCs in the system,
optimized to HCLGE_MAX_TC_NUM.

Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
liuzhongzhu
9194d18b05 net: hns3: fix the problem that the supported port is empty
Run ethtool ethx when displaying device information in VF,
the supported port and link mode items will be empty.

This patch fixes it.

Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Huazhong Tan
b6b4f987c5 net: hns3: fix a wrong checking in the hclge_tx_buffer_calc()
Only the TC is enabled, we need to check whether the buffer is enough,
otherwise it may lead to a wrong -ENOMEM case.

Fixes: 9ffe79a9c2 ("net: hns3: Support for dynamically assigning tx buffer to TC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Weihang Li
3a586422a5 net: hns3: move some set_bit statement into hclge_prepare_mac_addr
This patch does not change the code logic. There are some same
set_bit statements called by add/rm_uc/mc_addr_common, and move
this statements into hclge_prepare_mac_addr to reduce duplicate
code.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Weihang Li
b671b723e0 net: hns3: add hclge_cmd_check_retval() to parse comman's return value
For simplifying the code, this patch adds hclge_cmd_check_retval() to
check the return value of the command.

Also, according the IMP's description, when there are several descriptors
in a command, then the IMP will save the return value on the last
description, so hclge_cmd_check_retval() just check the last one for this
case.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Yunsheng Lin
8ca754b13f net: hns3: code optimization for hclge_rx_buffer_calc
There are four steps to calcuate the rx private buffer, each step
can be done in a function to avoid code duplication and aid code
readability.

This patch adds three separate functions do the job. Also, the
function name more or less make the comment redundant, so remove
some obvious comment.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Yonglong Liu
1731be4c73 net: hns3: Modify parameter type from int to bool in set_gro_en
The second parameter to the hook function set_gro_en is always passed in
true/false, so modify it's type from int to bool.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Peng Li
6241e71e72 net: hns3: fix an issue for hns3_update_new_int_gl
HNS3 supports setting rx-usecs|tx-usecs as 0, but it will not
update dynamically when adaptive-tx or adaptive-rx is enable.
This patch removes the Redundant check.

Fixes: a95e1f8666 ("net: hns3: change the time interval of int_gl calculating")
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Peng Li
9e50dc11b8 net: hns3: fix a code style issue for hns3_update_new_int_gl()
Use the same code style for rx_group and tx_group in the
hns3_update_new_int_gl().

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02 08:24:08 -08:00
Otavio Salvador
2b679ca113
regulator: rk808: Fix BUCK1/2 voltages on rk805
RK805 has the following voltage range for the BUCK1 and BUCK2 regulators:

From 0.7125V to 1.45V in 12.5mV steps, 1.8V, 2V, 2.2V and 2.3V

, which corresponds to the following values as per the RK805
datasheet:

000 000: 0.7125V
000 001: 0.725V
……
111 011: 1.45V
111 100: 1.8V
111 101: 2.0V
111 110: 2.2V
111 111: 2.3V

This means that the voltage range is not linear and so RK805 can not
reuse the same regulator_ops structure from RK808.

Fix it by creating a list with the correct supported voltage values
for RK805 BUCK1 and BUCK2 regulators.

Tested on a rv1108-elgin-r1 board that now correctly reports a BUCK2
voltage of 2.2V instead of the unsupported value of 1.4875V.

Fixes: c4e0d344c1 ("regulator: rk808: Add regulator driver for RK805")
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 17:16:06 +01:00
Zhiwei Jiang
411db2ab7d
ASoC: dapm: Add warnings for widget overwrite when adding route
Currently, in some complex cases, more than one widgets have same
name and registed from differnt dapm context, and route add from
another context too. When snd_soc_dapm_add_route, the previous
registered widget will overwritten by the latest same name widget,
will cause unexpect error. For Asoc framework we cant avoid this
situation and we cant decide which widget that wanted with route.
At least we can give users a notice.

Signed-off-by: Zhiwei Jiang <qq282012236@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 17:15:27 +01:00
Charles Keepax
078a85f280
ASoC: dapm: Only power up active channels from a DAI
Currently all widgets attached to a DAI link will be powered
up when the DAI is active, however this may include routes
that are not actually in use if there are unused channels
available on the DAI.

The macros for creating AIF widgets already include an entry for
slot, it is proposed to change that to channel. The effective
difference here being respresenting the logical channel index
rather than the physical slot index. The CODECs currently
using the slot entry on the DAPM_AIF macros are using it in
a manner consistent with this, the CODECs not using it just
have the field set to zero.

A variable is added to snd_soc_dapm_widget to represent
this channel index and then for each AIF widget attached to
a DAI this is compared against the number of channels on
the stream. Enabling the links for those which will be in
use. This has the nice property that the CODECs which haven't
used the slot/channel entry in the macro will function exactly
as before due to all the AIF widgets having a channel of zero
and a stream by definition having at least one channel.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 17:15:17 +01:00
Guennadi Liakhovetski
52abe6cc18
ASoC: topology: fix oops/use-after-free case with dai driver
rmmod/modprobe tests expose a kernel oops when accessing the dai
driver pointer. This comes from the topology design which operates in
multiple passes. Each object removal happens at a specific iteration,
and the code checks for the iteration (order) number after the memory
containing the order was freed.

Fix this be clearing a reference to the dai driver and check its
validity to avoid dereferences.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 17:13:28 +01:00
Pierre-Louis Bossart
199ed3e81c
ASoC: dapm: fix use-after-free issue with dailink sname
Commit 7620fe9161 ("ASoC: topology: fix memory leak in
soc_tplg_dapm_widget_create") fixed a memory leak issue, but
additional tests and KASAN reports show a use-after-free in soc-dapm.

The widgets are created with a kmemdup operating on a template. The
"name" string is also duplicated, but the "sname" string is not. As a
result, when the template is freed after widget creation, its sname
string is still used.

Fix by explicitly duplicating the "sname" string, and freeing it when
required.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 17:13:09 +01:00
Axel Lin
8cf268e535
regulator: uniphier: Constify uniphier_regulator_ops
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 17:05:42 +01:00
Beniamin Bia
80109c3234 staging: iio: frequency: ad9833: Get frequency value statically
The values from platform data were replaced by statically values.
This was just a intermediate step of taking this driver out of staging and
load data from device tree.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 16:01:36 +00:00
Robert Eshleman
1e65b2f1f6 dt-bindings: iio: light: Add max44009
Adds device tree bindings for the max44009 light sensor.

Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 16:01:22 +00:00
Axel Lin
33cd870c4b
regulator: uniphier: Fix probe error handling
Ensure unwind all resources if probe fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 16:00:04 +00:00
KaiChieh Chuang
4bd8597dc3
ASoC: mediatek: add btcvsd driver
The driver function for transferring/receiving
BT encoded data to/from BT firmware.

Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 15:59:27 +00:00
KaiChieh Chuang
425da20a98
ASoC: mediatek: add documents for btcvsd driver
document for btcvsd driver

Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 15:58:43 +00:00
Robert Eshleman
6aef699a7d iio: light: add driver for MAX44009
The MAX44009 is a low-power ambient light sensor from Maxim
Integrated. It differs from the MAX44000 in that it doesn't have
proximity sensing and that it requires far less current (1 micro-amp
vs 5 micro-amps). The register mapping and feature set between the
two are different enough to require a new driver for the MAX44009.

Developed and tested with a BeagleBone Black and UDOO Neo (i.MX6SX)

Supported features:

* Reading lux (processed value)

* Rising and falling illuminance threshold
  events

* Configuring integration time

https://datasheets.maximintegrated.com/en/ds/MAX44009.pdf

Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 15:47:46 +00:00
Charles Keepax
909d74e39f
ASoC: arizona: Add channel numbers to AIFs
Set the channel number on each AIF widget to allow unused channels not
to be powered up across AIFs.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 15:42:34 +00:00
Kuninori Morimoto
2264cf2e5d
ASoC: rsnd: fixup TDM Split mode check for CTU
Renesas sound card need to judge that whether it is using
"TDM Split mode". To judge it and for other purpose, it has
rsnd_parse_connect_simple() and rsnd_parse_connect_graph(),
but these are using different judgement policy for
TDM Split mode.
It is pointless and confusable.
This patch add new rsnd_parse_tdm_split_mode() and use common
judgement policy for simple-card/audio-graph.

Without this patch, CTU will be judged as TDM Split mode
on audio-graph card.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 15:42:11 +00:00
Kuninori Morimoto
f497c88b19
ASoC: rsnd: synchronize connection check for simple-card/audio-graph
Current rsnd driver has below function to check connection
	rsnd_parse_connect_simple()
	rsnd_parse_connect_graph()
But these have different parameters. This patch synchronize these
for cleanup.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 15:42:10 +00:00
Kuninori Morimoto
7aea8a9d71
ASoC: rsnd: fixup MIX kctrl registration
Renesas sound device has many IPs and many situations.
If platform/board uses MIXer, situation will be more complex.
To avoid duplicate DVC kctrl registration when MIXer was used,
it had original flags.
But it was issue when sound card was re-binded, because
no one can't cleanup this flags then.

To solve this issue, commit 9c698e8481 ("ASoC: rsnd: tidyup
registering method for rsnd_kctrl_new()") checks registered
card->controls, because if card was re-binded, these were cleanuped
automatically. This patch could solve re-binding issue.
But, it start to avoid MIX kctrl.

To solve these issues, we need below.
To avoid card re-binding issue: check registered card->controls
To avoid duplicate DVC registration: check registered rsnd_kctrl_cfg
To allow multiple MIX registration: check registered rsnd_kctrl_cfg
This patch do it.

Fixes: 9c698e8481 ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()")
Reported-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-By: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-02 15:41:29 +00:00
Biju Das
59600d045f dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
RZ/G1C (R8A77470) watchdog implementation is compatible with R-Car
Gen2, therefore add relevant documentation.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-02-02 14:06:36 +01:00
Sai Prakash Ranjan
671cdde36e watchdog: qcom: Add suspend/resume support
This adds the support for qcom watchdog suspend and resume
when entering and exiting deep sleep states. Otherwise
having watchdog active after suspend would result in unwanted
crashes/resets if resume happens after a long time.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-02-02 14:06:36 +01:00
Qiuxu Zhuo
d4dc89d069 EDAC, i10nm: Add a driver for Intel 10nm server processors
This driver supports the Intel 10nm series server integrated memory
controller. It gets the memory capacity and topology information by
reading the registers in PCI configuration space and memory-mapped I/O.

It decodes the memory error address to the platform specific address
by using the ACPI Address Translation (ADXL) Device Specific Method
(DSM).

Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-5-tony.luck@intel.com
2019-02-02 13:33:18 +01:00
Qiuxu Zhuo
98f2fc829e EDAC, skx_edac: Delete duplicated code
Delete the duplicated code from skx_edac.c and rename skx_edac.c to
skx_base.c. Update the Makefile to build the skx_edac driver from
skx_base.c and skx_common.c.

Add SPDX to skx_base.c and clean out unnecessary #include lines.

 [ bp: Drop the license boilerplate - there's an SPDX identifier now. ]

Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-4-tony.luck@intel.com
2019-02-02 13:33:11 +01:00
Stefan Popa
b64d973008 dt-bindings: iio: adc: Add docs for AD7768-1
Document support for AD7768-1 Analog to Digital Converter.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 10:30:20 +00:00
Stefan Popa
a5f8c7da3d iio: adc: Add AD7768-1 ADC basic support
The ad7768-1 is a single channel, precision 24-bit analog to digital
converter (ADC).

This basic patch configures the device in fast mode, with 32 kSPS and
leaves the default sinc5 filter.

Two data conversion modes are made available. When data is retrieved by
using the read_raw attribute, one shot single conversion mode is set.
The continuous conversion mode is enabled when the triggered buffer
mechanism is used. To assure correct data retrieval, the driver waits
for the interrupt triggered by the low to high transition of the DRDY
pin.

Datasheets:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02 10:28:56 +00:00
Qian Cai
74c953ca5f efi/arm64: Fix debugfs crash by adding a terminator for ptdump marker
When reading 'efi_page_tables' debugfs triggers an out-of-bounds access here:

  arch/arm64/mm/dump.c: 282
  if (addr >= st->marker[1].start_address) {

called from:

  arch/arm64/mm/dump.c: 331
  note_page(st, addr, 2, pud_val(pud));

because st->marker++ is is called after "UEFI runtime end" which is the
last element in addr_marker[]. Therefore, add a terminator like the one
for kernel_page_tables, so it can be skipped to print out non-existent
markers.

Here's the KASAN bug report:

  # cat /sys/kernel/debug/efi_page_tables
  ---[ UEFI runtime start ]---
  0x0000000020000000-0x0000000020010000          64K PTE       RW NX SHD AF ...
  0x0000000020200000-0x0000000021340000       17664K PTE       RW NX SHD AF ...
  ...
  0x0000000021920000-0x0000000021950000         192K PTE       RW x  SHD AF ...
  0x0000000021950000-0x00000000219a0000         320K PTE       RW NX SHD AF ...
  ---[ UEFI runtime end ]---
  ---[ (null) ]---
  ---[ (null) ]---

   BUG: KASAN: global-out-of-bounds in note_page+0x1f0/0xac0
   Read of size 8 at addr ffff2000123f2ac0 by task read_all/42464
   Call trace:
    dump_backtrace+0x0/0x298
    show_stack+0x24/0x30
    dump_stack+0xb0/0xdc
    print_address_description+0x64/0x2b0
    kasan_report+0x150/0x1a4
    __asan_report_load8_noabort+0x30/0x3c
    note_page+0x1f0/0xac0
    walk_pgd+0xb4/0x244
    ptdump_walk_pgd+0xec/0x140
    ptdump_show+0x40/0x50
    seq_read+0x3f8/0xad0
    full_proxy_read+0x9c/0xc0
    __vfs_read+0xfc/0x4c8
    vfs_read+0xec/0x208
    ksys_read+0xd0/0x15c
    __arm64_sys_read+0x84/0x94
    el0_svc_handler+0x258/0x304
    el0_svc+0x8/0xc

  The buggy address belongs to the variable:
   __compound_literal.0+0x20/0x800

  Memory state around the buggy address:
   ffff2000123f2980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffff2000123f2a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
  >ffff2000123f2a80: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 00
                                            ^
   ffff2000123f2b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffff2000123f2b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0

[ ardb: fix up whitespace ]
[ mingo: fix up some moar ]

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9d80448ac9 ("efi/arm64: Add debugfs node to dump UEFI runtime page tables")
Link: http://lkml.kernel.org/r/20190202095017.13799-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-02 11:27:29 +01:00
Codrin Ciubotariu
dc3f595b66 dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-02-02 15:55:26 +05:30