Commit graph

982,081 commits

Author SHA1 Message Date
Nicholas Kazlauskas
428da2bdb0 drm/amd/display: Enable vblank interrupt during CRC capture
[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.

When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.

This issue was found running:

igt@kms_plane_multiple@atomic-pipe-b-tiling-none

The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.

[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:55 -05:00
Martin Tsai
22051b636e drm/amd/display: Poll pending down rep before clear payload allocation table
[Why]
On current design, driver cannot handle the interrupt for
down reply when link training is processing. The DOWN REQ
send before link training will keep in the pending DOWN REP
state in the queue.
It makes the next DOWN REQ be queued until time out.

[How]
To add a polling sequence before clear payload allocation table
to make sure the pending DOWN REP can be handled.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:46 -05:00
Thomas Zimmermann
cbce5f0a9f drm/ttm: Remove ttm_bo_reference and ttm_bo_unref
Both functions are obsolete and all calls have been replaced by
ttm_bo_get and ttm_bo_put.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:38 -05:00
Thomas Zimmermann
706b7761ab drm/mgag200: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:31 -05:00
Thomas Zimmermann
6034d9d48e drm/vmwgfx: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

In places where is might be necessary, the current behaviour of cleaning the
pointer is kept.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:24 -05:00
Thomas Zimmermann
2d18cb98d6 drm/vmwgfx: Replace ttm_bo_reference with ttm_bo_get
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:18 -05:00
Thomas Zimmermann
829eee6290 drm/nouveau: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:11 -05:00
Thomas Zimmermann
b063dc9c1c drm/nouveau: Replace ttm_bo_reference with ttm_bo_get
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:43:02 -05:00
Thomas Zimmermann
376bc02da2 drm/ast: Replace ttm_bo_unref with ttm_bo_put
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-28 11:42:41 -05:00
Chris Wilson
1e345568e3 drm/i915: Move list of timelines under its own lock
Currently, the list of timelines is serialised by the struct_mutex, but
to alleviate difficulties with using that mutex in future, move the
list management under its own dedicated mutex.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-5-chris@chris-wilson.co.uk
2019-01-28 16:24:22 +00:00
Chris Wilson
0ca88ba0d6 drm/i915: Always allocate an object/vma for the HWSP
Currently we only allocate an object and vma if we are using a GGTT
virtual HWSP, and a plain struct page for a physical HWSP. For
convenience later on with global timelines, it will be useful to always
have the status page being tracked by a struct i915_vma. Make it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-4-chris@chris-wilson.co.uk
2019-01-28 16:24:19 +00:00
Chris Wilson
528cbd17ce drm/i915: Move vma lookup to its own lock
Remove the struct_mutex requirement for looking up the vma for an
object.

v2: Highlight how the race for duplicate vma creation is resolved on
reacquiring the lock with a short comment.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-3-chris@chris-wilson.co.uk
2019-01-28 16:24:16 +00:00
Chris Wilson
09d7e46b97 drm/i915: Pull VM lists under the VM mutex.
A starting point to counter the pervasive struct_mutex. For the goal of
avoiding (or at least blocking under them!) global locks during user
request submission, a simple but important step is being able to manage
each clients GTT separately. For which, we want to replace using the
struct_mutex as the guard for all things GTT/VM and switch instead to a
specific mutex inside i915_address_space.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-2-chris@chris-wilson.co.uk
2019-01-28 16:24:13 +00:00
Chris Wilson
499197dc16 drm/i915: Stop tracking MRU activity on VMA
Our goal is to remove struct_mutex and replace it with fine grained
locking. One of the thorny issues is our eviction logic for reclaiming
space for an execbuffer (or GTT mmaping, among a few other examples).
While eviction itself is easy to move under a per-VM mutex, performing
the activity tracking is less agreeable. One solution is not to do any
MRU tracking and do a simple coarse evaluation during eviction of
active/inactive, with a loose temporal ordering of last
insertion/evaluation. That keeps all the locking constrained to when we
are manipulating the VM itself, neatly avoiding the tricky handling of
possible recursive locking during execbuf and elsewhere.

Note that discarding the MRU (currently implemented as a pair of lists,
to avoid scanning the active list for a NONBLOCKING search) is unlikely
to impact upon our efficiency to reclaim VM space (where we think a LRU
model is best) as our current strategy is to use random idle replacement
first before doing a search, and over time the use of softpinned 48b
per-ppGTT is growing (thereby eliminating any need to perform any eviction
searches, in theory at least) with the remaining users being found on
much older devices (gen2-gen6).

v2: Changelog and commentary rewritten to elaborate on the duality of a
single list being both an inactive and active list.
v3: Consolidate bool parameters into a single set of flags; don't
comment on the duality of a single variable being a multiplicity of
bits.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-1-chris@chris-wilson.co.uk
2019-01-28 16:24:09 +00:00
Axel Lin
d023377093
regulator: axp20x: Fix incorrect vsel_mask settings
Fix copy-paste mistake while converting to use defines for masks.

Fixes: db4a555f7c ("regulator: axp20x: use defines for masks")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-28 15:38:04 +00:00
Axel Lin
1dceee5eb3
regulator: isl6271a: Constify isl_core_ops and isl_fixed_ops
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-28 15:30:58 +00:00
Axel Lin
a6e58299e3
regulator: isl6271a: Remove *rdev[3] from struct isl_pmic
This driver is using devm_regulator_register, so it's not necessary to
store *rdev[3] in struct isl_pmic. Use a local variable instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-28 15:29:03 +00:00
Fathi Boudra
7d4e591bc0 selftests: timers: use LDLIBS instead of LDFLAGS
posix_timers fails to build due to undefined reference errors:

 aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
 -O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
 -DKTEST  -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
 posix_timers.c
 -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
 /tmp/cc1FTZzT.o: In function `check_timer_create':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
 undefined reference to `timer_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
 undefined reference to `timer_settime'
 collect2: error: ld returned 1 exit status

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-28 08:02:12 -07:00
Fathi Boudra
870f193d48 selftests: net: use LDLIBS instead of LDFLAGS
reuseport_bpf_numa fails to build due to undefined reference errors:

 aarch64-linaro-linux-gcc
 --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall
 -Wl,--no-as-needed -O2 -g -I../../../../usr/include/  -Wl,-O1
 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma  reuseport_bpf_numa.c
 -o
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa
 /tmp/ccfUuExT.o: In function `send_from_node':
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138:
 undefined reference to `numa_run_on_node'
 /tmp/ccfUuExT.o: In function `main':
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230:
 undefined reference to `numa_available'
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233:
 undefined reference to `numa_max_node'

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libnuma.

Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-28 08:02:12 -07:00
Greg Kroah-Hartman
7dd541a3fb s390: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28 15:58:55 +01:00
Greg Kroah-Hartman
d7f2f7c7fc s390: pci: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28 15:58:54 +01:00
Greg Kroah-Hartman
f36108c462 s390/hypfs: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28 15:58:54 +01:00
Collin Walling
4ad78b8651 s390/setup: set control program code via diag 318
The s390x diagnose 318 instruction sets the control program name code (CPNC)
and control program version code (CPVC) to provide useful information
regarding the OS during debugging. The CPNC is explicitly set to 4 to
indicate a Linux/KVM environment.

The CPVC is a 7-byte value containing:

 - 3-byte Linux version code, currently set to 0
 - 3-byte unique value, currently set to 0
 - 1-byte trailing null

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1544135405-22385-2-git-send-email-walling@linux.ibm.com>
[set version code to 0 until the structure is fully defined]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28 15:58:53 +01:00
Liu Xiang
0b7a814c26 ext2: Remove redundant check for finding no group
When best_desc keeps NULL, best_group keeps -1, too. So we can
return best_group directly.

Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Jan Kara <jack@suse.cz>
2019-01-28 15:51:11 +01:00
Mathieu Malaterre
f068ebd13b ext2: Annotate implicit fall through in __ext2_truncate_blocks
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1).

This commit removes the following warnings:

  fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
  fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2019-01-28 15:50:45 +01:00
Harald Freudenberger
8f9aca0c45 s390/zcrypt: fix specification exception on z196 during ap probe
The older machines don't have the QCI instruction available.
With support for up to 256 crypto cards the probing of each
card has been extended to check card ids from 0 up to 255.
For machines with QCI support there is a filter limiting the
range of probed cards. The older machines (z196 and older)
don't have this filter and so since support for 256 cards is
in the driver all cards are probed. However, these machines
also require to have the card id fit into 6 bits. Exceeding
this limit results in a specification exception which happens
on every kernel startup even when there is no crypto configured
and used at all.

This fix limits the range of probed crypto cards to 64 if
there is no QCI instruction available to obey to the older
ap architecture and so fixes the specification exceptions
on z196 machines.

Cc: stable@vger.kernel.org # v4.17+
Fixes: af4a72276d ("s390/zcrypt: Support up to 256 crypto adapters.")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28 15:43:17 +01:00
Stefan Haberland
4a8ef6999b s390/dasd: fix using offset into zero size array error
Dan Carpenter reported the following:

The patch 52898025cf: "[S390] dasd: security and PSF update patch
for EMC CKD ioctl" from Mar 8, 2010, leads to the following static
checker warning:

	drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io()
	error: using offset into zero size array 'psf_data[]'

drivers/s390/block/dasd_eckd.c
  4458          /* Copy parms from caller */
  4459          rc = -EFAULT;
  4460          if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
                                    ^^^^^^^
The user can specify any "usrparm.psf_data_len".  They choose zero by
mistake.

  4461                  goto out;
  4462          if (is_compat_task()) {
  4463                  /* Make sure pointers are sane even on 31 bit. */
  4464                  rc = -EINVAL;
  4465                  if ((usrparm.psf_data >> 32) != 0)
  4466                          goto out;
  4467                  if ((usrparm.rssd_result >> 32) != 0)
  4468                          goto out;
  4469                  usrparm.psf_data &= 0x7fffffffULL;
  4470                  usrparm.rssd_result &= 0x7fffffffULL;
  4471          }
  4472          /* alloc I/O data area */
  4473          psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL
  			   				 | GFP_DMA);
  4474          rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL
							       | GFP_DMA);
  4475          if (!psf_data || !rssd_result) {

kzalloc() returns a ZERO_SIZE_PTR (0x16).

  4476                  rc = -ENOMEM;
  4477                  goto out_free;
  4478          }
  4479
  4480          /* get syscall header from user space */
  4481          rc = -EFAULT;
  4482          if (copy_from_user(psf_data,
  4483                             (void __user *)(unsigned long)
  				   	 		 usrparm.psf_data,
  4484                             usrparm.psf_data_len))

That all works great.

  4485                  goto out_free;
  4486          psf0 = psf_data[0];
  4487          psf1 = psf_data[1];

But now we're assuming that "->psf_data_len" was at least 2 bytes.

Fix this by checking the user specified length psf_data_len.

Fixes: 52898025cf ("[S390] dasd: security and PSF update patch for EMC CKD ioctl")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28 15:43:17 +01:00
Martin Schwidefsky
634692ab70 s390/suspend: fix stack setup in swsusp_arch_suspend
The patch that added support for the virtually mapped kernel stacks changed
swsusp_arch_suspend to switch to the nodat-stack as the vmap stack is not
available while going in and out of suspend.

Unfortunately the switch to the nodat-stack is incorrect which breaks
suspend to disk.

Cc: stable@vger.kernel.org # v4.20
Fixes: ce3dc44749 ("s390: add support for virtually mapped kernel stacks")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28 15:43:17 +01:00
Josef Bacik
302167c50b btrfs: don't end the transaction for delayed refs in throttle
Previously callers to btrfs_end_transaction_throttle() would commit the
transaction if there wasn't enough delayed refs space.  This happens in
relocation, and if the fs is relatively empty we'll run out of delayed
refs space basically immediately, so we'll just be stuck in this loop of
committing the transaction over and over again.

This code existed because we didn't have a good feedback mechanism for
running delayed refs, but with the delayed refs rsv we do now.  Delete
this throttling code and let the btrfs_start_transaction() in relocation
deal with putting pressure on the delayed refs infrastructure.  With
this patch we no longer take 5 minutes to balance a metadata only fs.

Qu has submitted a fstest to catch slow balance or excessive transaction
commits. Steps to reproduce:

* create subvolume
* create many (eg. 16000) inlined files, of size 2KiB
* iteratively snapshot and touch several files to trigger metadata
  updates
* start balance -m

Reported-by: Qu Wenruo <wqu@suse.com>
Fixes: 64403612b7 ("btrfs: rework btrfs_check_space_for_delayed_refs")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add tags and steps to reproduce ]
Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-28 15:41:11 +01:00
Andrew Lunn
7ae710f9f8 gpio: vf610: Mask all GPIO interrupts
On SoC reset all GPIO interrupts are disable. However, if kexec is
used to boot into a new kernel, the SoC does not experience a
reset. Hence GPIO interrupts can be left enabled from the previous
kernel. It is then possible for the interrupt to fire before an
interrupt handler is registered, resulting in the kernel complaining
of an "unexpected IRQ trap", the interrupt is never cleared, and so
fires again, resulting in an interrupt storm.

Disable all GPIO interrupts before registering the GPIO IRQ chip.

Fixes: 7f2691a196 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 15:28:43 +01:00
Andy Shevchenko
876811f7c3 gpiolib: acpi: Correct kernel doc of struct acpi_gpio_event
The checker complains during build

gpiolib-acpi.c:45: warning: Function parameter or member 'irq_requested' not described in 'acpi_gpio_event'

because the typo in the field description.

Fix the name to have documentation up-to-date.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 15:24:15 +01:00
Jisheng Zhang
c246761b44 pinctrl: berlin: as370: use generic "pwm" as pwm function name
So that we could use the generic "pwm" for two or more pins, e.g

	pwm0_pmux: pwm0-pmux {
		groups = "PWM0", "PWM1";
		function = "pwm";
	};

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 15:20:53 +01:00
Andrew Lunn
b868db94a6 gpio: tqmx86: Add GPIO from for this IO controller
Some TQ-Systems ComExpress modules contain an IO controller with 8
GPIO lines.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 15:19:23 +01:00
Filipe Manana
a627947076 Btrfs: fix deadlock when allocating tree block during leaf/node split
When splitting a leaf or node from one of the trees that are modified when
flushing pending block groups (extent, chunk, device and free space trees),
we need to allocate a new tree block, which in turn can result in the need
to allocate a new block group. After allocating the new block group we may
need to flush new block groups that were previously allocated during the
course of the current transaction, which is what may cause a deadlock due
to attempts to write lock twice the same leaf or node, as when splitting
a leaf or node we are holding a write lock on it and its parent node.

The same type of deadlock can also happen when increasing the tree's
height, since we are holding a lock on the existing root while allocating
the tree block to use as the new root node.

An example trace when the deadlock happens during the leaf split path is:

  [27175.293054] CPU: 0 PID: 3005 Comm: kworker/u17:6 Tainted: G        W         4.19.16 #1
  [27175.293942] Hardware name: Penguin Computing Relion 1900/MD90-FS0-ZB-XX, BIOS R15 06/25/2018
  [27175.294846] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
  (...)
  [27175.298384] RSP: 0018:ffffab2087107758 EFLAGS: 00010246
  [27175.299269] RAX: 0000000000000bbd RBX: ffff9fadc7141c48 RCX: 0000000000000001
  [27175.300155] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9fadc7141c48
  [27175.301023] RBP: 0000000000000001 R08: ffff9faeb6ac1040 R09: ffff9fa9c0000000
  [27175.301887] R10: 0000000000000000 R11: 0000000000000040 R12: ffff9fb21aac8000
  [27175.302743] R13: ffff9fb1a64d6a20 R14: 0000000000000001 R15: ffff9fb1a64d6a18
  [27175.303601] FS:  0000000000000000(0000) GS:ffff9fb21fa00000(0000) knlGS:0000000000000000
  [27175.304468] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [27175.305339] CR2: 00007fdc8743ead8 CR3: 0000000763e0a006 CR4: 00000000003606f0
  [27175.306220] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [27175.307087] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [27175.307940] Call Trace:
  [27175.308802]  btrfs_search_slot+0x779/0x9a0 [btrfs]
  [27175.309669]  ? update_space_info+0xba/0xe0 [btrfs]
  [27175.310534]  btrfs_insert_empty_items+0x67/0xc0 [btrfs]
  [27175.311397]  btrfs_insert_item+0x60/0xd0 [btrfs]
  [27175.312253]  btrfs_create_pending_block_groups+0xee/0x210 [btrfs]
  [27175.313116]  do_chunk_alloc+0x25f/0x300 [btrfs]
  [27175.313984]  find_free_extent+0x706/0x10d0 [btrfs]
  [27175.314855]  btrfs_reserve_extent+0x9b/0x1d0 [btrfs]
  [27175.315707]  btrfs_alloc_tree_block+0x100/0x5b0 [btrfs]
  [27175.316548]  split_leaf+0x130/0x610 [btrfs]
  [27175.317390]  btrfs_search_slot+0x94d/0x9a0 [btrfs]
  [27175.318235]  btrfs_insert_empty_items+0x67/0xc0 [btrfs]
  [27175.319087]  alloc_reserved_file_extent+0x84/0x2c0 [btrfs]
  [27175.319938]  __btrfs_run_delayed_refs+0x596/0x1150 [btrfs]
  [27175.320792]  btrfs_run_delayed_refs+0xed/0x1b0 [btrfs]
  [27175.321643]  delayed_ref_async_start+0x81/0x90 [btrfs]
  [27175.322491]  normal_work_helper+0xd0/0x320 [btrfs]
  [27175.323328]  ? move_linked_works+0x6e/0xa0
  [27175.324160]  process_one_work+0x191/0x370
  [27175.324976]  worker_thread+0x4f/0x3b0
  [27175.325763]  kthread+0xf8/0x130
  [27175.326531]  ? rescuer_thread+0x320/0x320
  [27175.327284]  ? kthread_create_worker_on_cpu+0x50/0x50
  [27175.328027]  ret_from_fork+0x35/0x40
  [27175.328741] ---[ end trace 300a1b9f0ac30e26 ]---

Fix this by preventing the flushing of new blocks groups when splitting a
leaf/node and when inserting a new root node for one of the trees modified
by the flushing operation, similar to what is done when COWing a node/leaf
from on of these trees.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202383
Reported-by: Eli V <eliventer@gmail.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-28 15:04:58 +01:00
Linus Walleij
c6868f7cab pinctrl: sh-pfc: Updates for v5.1
- Add TMU pin groups on R-Car E3,
   - Miscellaneous fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXEnXuQAKCRCKwlD9ZEnx
 cFJqAP4hmcb8FPI+WYl6S4LCPiEIoh7DyzvMNqaAIapESh2+OgEAuL90j3GPqeBW
 zFEqI29YXvMwimZO+1Zsnl3lw8PiNgY=
 =2+rG
 -----END PGP SIGNATURE-----

Merge tag 'sh-pfc-for-v5.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v5.1

  - Add TMU pin groups on R-Car E3,
  - Miscellaneous fixes and cleanups.
2019-01-28 15:02:04 +01:00
Phil Reid
9ce01efe5b gpio: altera: Fixup block comment style
Add missing '*' char to the start of the comment lines.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 14:59:58 +01:00
Ville Syrjälä
7bed8adcd9 drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen
Certain SNB machines (eg. ASUS K53SV) seem to have a broken BIOS
which misprograms the hardware badly when encountering a suitably
high resolution display. The programmed pipe timings are somewhat
bonkers and the DPLL is totally misprogrammed (P divider == 0).
That will result in atomic commit timeouts as apparently the pipe
is sufficiently stuck to not signal vblank interrupts.

IIRC something like this was also observed on some other SNB
machine years ago (might have been a Dell XPS 8300) but a BIOS
update cured it. Sadly looks like this was never fixed for the
ASUS K53SV as the latest BIOS (K53SV.320 11/11/2011) is still
broken.

The quickest way to deal with this seems to be to shut down
the pipe+ports+DPLL. Unfortunately doing this during the
normal sanitization phase isn't quite soon enough as we
already spew several WARNs about the bogus hardware state.
But it's better than hanging the boot for a few dozen seconds.
Since this is limited to a few old machines it doesn't seem
entirely worthwile to try and rework the readout+sanitization
code to handle it more gracefully.

v2: Fix potential NULL deref (kbuild test robot)
    Constify has_bogus_dpll_config()

Cc: stable@vger.kernel.org # v4.20+
Cc: Daniel Kamil Kozar <dkk089@gmail.com>
Reported-by: Daniel Kamil Kozar <dkk089@gmail.com>
Tested-by: Daniel Kamil Kozar <dkk089@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109245
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111174950.10681-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2019-01-28 15:53:32 +02:00
Ville Syrjälä
8a920e24f0 drm/i915/tv: Use the scanline counter for timestamps on i965gm TV output
Just like the frame counter, the pixel counter also reads zero
all the time when the TV encoder is used. Fortunately the
scanline counter still works sufficiently well so let's use that
to correct the vblank timestamps. Otherwise the timestamps may
en up out of whack, and since we use them to guesstimate the
vblank counter value that may end up incorrect as well.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125181931.19482-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
2019-01-28 15:53:32 +02:00
Ville Syrjälä
6a2a940410 drm/i915/tv: Fix return value for intel_tv_compute_config()
Ever since commit 204474a6b8 ("drm/i915: Pass down rc in
intel_encoder->compute_config()") we're supposed to return an
errno from .compute_config(). I failed to notice that when
pushing the TV encoder fixes which were written before said
commmit. Fix up the return value for the error case.

Cc: Imre Deak <imre.deak@intel.com>
Fixes: 690157f0a9 ("drm/i915/tv: Fix >1024 modes on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125181931.19482-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
2019-01-28 15:53:32 +02:00
YueHaibing
4f41e66cf5 pinctrl: sirf: drop pointless static qualifier in sirfsoc_gpio_probe
There is no need to have the 'sgpio' variable static since new
value always be assigned before use it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 14:42:55 +01:00
YueHaibing
ff54d82b77 pinctrl: ti-iodelay: Fix platform_no_drv_owner.cocci warnings
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 14:41:54 +01:00
Vladimir Zapolskiy
e73339037f pinctrl: remove unused 'pinconf-config' debugfs interface
The main goal of the change is to remove .pin_config_dbg_parse_modify
callback before a driver with its support appears. So far the in-kernel
interface did not attract any users since its introduction 5 years ago.

Originally .pin_config_dbg_parse_modify callback and the associated
'pinconf-config' debugfs file were introduced in commit f07512e615
("pinctrl/pinconfig: add debug interface"), a short description of
'pinconf-config' usage for debugging can be expressed this way:

Write to 'pinconf-config' (see pinconf_dbg_config_write() function):

% echo -n modify $map_type $device_name $state_name $pin_name $config > \
	/sys/kernel/debug/pinctrl/$pinctrl/pinconf-config

It supposes to update a global (therefore single!) 'pinconf_dbg_conf'
variable with an alternative setting, the arguments should match
an existing pinconf device and some registered pinctrl mapping 'map':

* $map_type is either 'config_pin' or 'config_group', it should match
  'map->type' value of PIN_MAP_TYPE_CONFIGS_PIN or
   PIN_MAP_TYPE_CONFIGS_GROUP accordingly,
* $device_name should match 'map->dev_name' string value,
* $state_name should match 'map->name' string value,
* $pin_name should match 'map->data.configs.group_or_pin' string value,

If all above has matched, then $config is a new value to be set by calling
pinconfops->pin_config_dbg_parse_modify(pctldev, config, matched_config).

After a successful write into 'pinconf-config' a user can read the file
to get information about that single modified pin configuration.

The fact is .pin_config_dbg_parse_modify callback has never been defined
in 'struct pinconf_ops' of any pinconf driver, thus an actual modification
of a pin or group state on any present pinconf controller does not happen,
and it declares that all related code is no more than dead code.

I discovered the issue while attempting to add .pin_config_dbg_parse_modify
support in some drivers and found that too short 'MAX_NAME_LEN' set by

  drivers/pinctrl/pinconf.c:372:#define MAX_NAME_LEN 15

is practically insufficient to store a regular pinctrl device name,
which are like 'e6060000.pin-controller-sh-pfc' or pin names like
'MX6QDL_PAD_ENET_REF_CLK', thus it is another indicator that the code
is barely usable, insufficiently tested and unprepossessing.

Of course it might be possible to increase MAX_NAME_LEN, and then add
.pin_config_dbg_parse_modify callbacks to the drivers, but the whole
idea of such a limited debug option looks inviable. A more flexible
way to functionally substitute the original approach is to implicitly
or explicitly use pinctrl_select_state() function whenever needed.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Laurent Meunier <laurent.meunier@st.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 14:39:52 +01:00
Vladimir Zapolskiy
87eff9af7e pinctrl: remove pinctrl/machine.h inclusion from pinctrl/pinconf.h
The change adds explicit inclusion of linux/pinctrl/machine.h header
to the only needed pinctrl-madera-core.c file, and therefore inclusion
of pinctrl/machine.h header from pinctrl/pinconf.h can be removed.

The change is preparatory to a follow-up reversal of commit f07512e615
("pinctrl/pinconfig: add debug interface").

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28 14:39:17 +01:00
Bin Liu
a53469a68e usb: phy: am335x: fix race condition in _probe
power off the phy should be done before populate the phy. Otherwise,
am335x_init() could be called by the phy owner to power on the phy first,
then am335x_phy_probe() turns off the phy again without the caller knowing
it.

Fixes: 2fc711d763 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28 15:31:43 +02:00
Linus Walleij
67e436ffd6 Merge branch 'ib-qcom-spmi' of /home/linus/linux-gpio into devel 2019-01-28 14:31:13 +01:00
Alexey Khoroshilov
512e6fb589 usb: dwc3: exynos: Fix error handling of clk_prepare_enable
If clk_prepare_enable() fails in dwc3_exynos_probe() or in
dwc3_exynos_resume(), exynos->clks[0] is left undisabled
because of usage preincrement in while condition.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 9f2168367a ("usb: dwc3: exynos: Rework clock handling and prepare for new variants")
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28 15:31:11 +02:00
Anders Roxell
f2105d4259 usb: phy: fix link errors
Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28 15:30:45 +02:00
Gustavo A. R. Silva
07c69f1148 usb: gadget: udc: net2272: Fix bitwise and boolean operations
(!x & y) strikes again.

Fix bitwise and boolean operations by enclosing the expression:

	intcsr & (1 << NET2272_PCI_IRQ)

in parentheses, before applying the boolean operator '!'.

Notice that this code has been there since 2011. So, it would
be helpful if someone can double-check this.

This issue was detected with the help of Coccinelle.

Fixes: ceb80363b2 ("USB: net2272: driver for PLX NET2272 USB device controller")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28 15:27:21 +02:00
Tejas Joglekar
1e19cdc806 usb: dwc3: gadget: Handle 0 xfer length for OUT EP
For OUT endpoints, zero-length transfers require MaxPacketSize buffer as
per the DWC_usb3 programming guide 3.30a section 4.2.3.3.

This patch fixes this by explicitly checking zero length
transfer to correctly pad up to MaxPacketSize.

Fixes: c6267a5163 ("usb: dwc3: gadget: align transfers to wMaxPacketSize")
Cc: stable@vger.kernel.org

Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28 15:27:07 +02:00
Gerd Hoffmann
b5f030b7b4 drm/qxl: use kernel mode db
Add all standard modes from the kernel's video mode data base.
Keep a few non-standard modes in the qxl mode list.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-23-kraxel@redhat.com
2019-01-28 14:24:54 +01:00