The geni set/get_mctrl() functions currently do nothing unless
hardware flow control is enabled. Remove this arbitrary limitation.
Suggested-by: Johan Hovold <johan@kernel.org>
Fixes: 8a8a66a1a1 ("tty: serial: qcom_geni_serial: Add support for flow control")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AZX_DCAPS_PM_RUNTIME flag is added to indicate support for runtime PM.
azx_has_pm_runtime() is used to check if above is enabled and thus
forbid runtime PM calls if needed.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch moves clock enable/disable from system resume/suspend to
runtime resume/suspend respectively. Along with this hda controller
chip init or stop is also moved. System resume/suspend can invoke
runtime callbacks and do necessary setup.
chip->running can be used to check for probe completion and device
access during runtime_resume or runtime_suspend can be avoided if
probe is not yet finished. This helps to avoid kernel panic during
boot where runtime PM callbacks can happen from system PM.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Explicit clock enable is not required during probe, as this would be
managed by runtime PM calls. Clock can be enabled/disabled in runtime
resume/suspend. This way it is easier to balance clock enable/disable
counts.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Moved devm_clk_get() API calls to a separate function and the same
can be called early in the probe. This is done before runtime PM
for the device is enabled. The runtime resume/suspend callbacks can
later enable/disable clocks respectively(the support would be added
in subsequent patches). Clock handles should be available by the
time runtime suspend/resume calls can happen.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables runtime power management(runtime PM) support for
hda. pm_runtime_enable() and pm_runtime_disable() are added during
device probe and remove respectively. The runtime PM callbacks will
be forbidden if hda controller does not have support for runtime PM.
pm_runtime_get_sync() and pm_runtime_put() are added for hda register
access. The callbacks for above will be added in subsequent patches.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have been using Makefile for well over a decade now, use that name
instead of Kbuild.
Also, while moving the file, add the proper SPDX identifier at the top
of it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file is really really old, and doesn't make any sense to keep
around anymore, so just drop it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few remaining drivers/usb/ files that do not have SPDX
identifiers in them, all of these are either Kconfig or Makefiles. Add
the correct GPL-2.0 identifier to them to make scanning tools happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed the checkpatch.pl warning:
WARNING: Missing a blank line after declarations
Added space after declarations to conform to coding style.
Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SPDX license identifier and the boiler plate text are
contradicting. Only the SPDX license identifier is needed. The
other one is removed.
Fixes: 86958dcc5a ("mmc: dw_mmc-bluefield: Add driver extension")
Cc: stable@vger.kernel.org
Reviewed-by: David Woods <dwoods@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
I prefer to use my personal email address for kernel related work.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add vendor prefix "catalyst" for Catalyst Semiconductor which is
already in use but undocumented.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After sending a sysmon shutdown request to the SSCTL service on the
subsystem, wait for the service to send shutdown-ack interrupt or
an indication message to signal the completion of graceful shutdown.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add shutdown-ack irq handling required for sysmon shutdown for
Q6V5 MSS on SDM845/MSM8996 and for WCSS Q6V5 on QCS404 SoC.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: Revert back to qcom_add_sysmon_subdev returning a sysmon object]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce shutdown-irq binding required for sysmon shutdown for Q6V5 MSS
on SDM845/MSM8996 SoCs and for WCSS Q6V5 on QCS404 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix some oversights in the XArray porcelain API:
- support for m68k's two-byte aligned pointers
- reserving entries using xa_insert()
- missing xa_insert_bh() and xa_insert_irq() functions
- simplify using xa_for_each()
- use lockdep correctly
- a few other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlxGjXAUHHdpbGx5QGlu
ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5L4Qf8DQaaA9aDsZ66CGaxExfxiEMM2SEl
Ns02XTgVWvXUPI2zHU6oZGBgWOY2jysy688WJZH7FlFJVzHytbZ26ZG6sabVD271
WQJnjSeZwNnCF0ZJP/mbr6SKkZHOaAxWRgeXJQFPvke58gMxj9w7a2qU5OEBcbS2
nUCk5LzqQHveH0UYQJJGvKca/p8f2h0Y28+BG5YRWo1ivEDAf6LaD2ItTOv5Jf/4
lfaW48h/ObBNMaor+0fn8Po5TtP9R8vgBGDt5XRjiTy0yXEq62HwTCHjOydqywTA
pyEN8zZMtOwDjz9eEm+WPR3bLcOmLK+i0+oRFpM7tNl+iq/i0DCjxpJ+eQ==
=56qs
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
"Fix some oversights in the XArray porcelain API:
- support for m68k's two-byte aligned pointers
- reserving entries using xa_insert()
- missing xa_insert_bh() and xa_insert_irq() functions
- simplify using xa_for_each()
- use lockdep correctly
- a few other minor fixes and improvements"
* tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax:
XArray: Fix an arithmetic error in xa_is_err
XArray tests: Check mark 2 gets squashed
XArray: Fix typo in comment
XArray: Honour reserved entries in xa_insert
XArray: Permit storing 2-byte-aligned pointers
XArray: Change xa_for_each iterator
XArray: Turn xa_init_flags into a static inline
XArray tests: Add RCU locking
In ramoops_register_dummy() dummy_data is allocated via kzalloc()
then it will always occupy the heap space after register platform
device via platform_device_register_data(), but it will not be
used any more. So let's free it for system usage, replace it with
stack memory is better due to small size.
Signed-off-by: Yue Hu <huyue2@yulong.com>
[kees: add required memset and adjust sizeof() argument]
Signed-off-by: Kees Cook <keescook@chromium.org>
Two flow specifications can set the ip protocol field in
the flow table entry:
1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly.
2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users
who want to receive specific L4 packets.
We need to avoid overriding of the ip_protocol with zeros,
in case that the user first put the L4 specification and
only then the L3.
Fixes: ca0d475385 ('IB/mlx5: Add support in TOS and protocol to flow steering')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support for ODP for DEVX indirection mkey, it includes:
- Recognizing its type as part of the radix tree lookup.
- Use similar flow as done for the MW MKEY type.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Manage indirection mkey upon DEVX flow to support ODP.
To support a page fault event on the indirection mkey it needs to be part
of the device mkey radix tree.
Both the creation and the deletion flows for a DEVX object which is
indirection mkey were adapted to handle that.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Once an indirection MKEY is created umem valid bit shouldn't be set as
this MKEY doesn't really hold a umem.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Having of_reserved_mem_device_init() forcibly reconfigure DMA for all
callers, potentially overriding the work done by a bus-specific
.dma_configure method earlier, is at best a bad idea and at worst
actively harmful. If drivers really need virtual devices to own
dma-coherent memory, they should explicitly configure those devices
based on the appropriate firmware node as they create them.
It looks like the only driver not passing in a proper OF platform device
is s5p-mfc, so move the rogue of_dma_configure() call into that driver
where it logically belongs.
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
AEQ overflow will be reported by hardware when too many asynchronous
events occurred but not be handled in time. Normally, AEQ overflow error
is not easy to occur. Once happened, we have to do physical function reset
to recover. PF reset is implemented in two steps. Firstly, set reset
level with ae_dev->ops->set_default_reset_request. Secondly, run reset
with ae_dev->ops->reset_event.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable rxe in the function is not used. So it is removed.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Work must hold a kref on the ib_device otherwise the dev pointer can
become free before the work runs. This can happen because the work is
being pushed onto the system work queue which is not flushed during driver
unregister.
Remove the bogus use of 'reg_state':
- While in uverbs the reg_state is guaranteed to always be
REGISTERED
- Testing reg_state with no locking is bogus. Use ib_device_try_get()
to get back into a region that prevents unregistration.
For now continue with a flow that is similar to the existing code.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
It turns out future patches need this capability quite widely now, not
just for netlink, so provide two global functions to manage the
registration lock refcount.
This also moves the point the lock becomes 1 to within
ib_register_device() so that the semantics of the public API are very sane
and clear. Calling ib_device_try_get() will fail on devices that are only
allocated but not yet registered.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
To comply with tests we need to support more power supply properties:
POWER_SUPPLY_PROP_VOLTAGE_NOW
POWER_SUPPLY_PROP_TEMP
POWER_SUPPLY_PROP_CHARGE_COUNTER
POWER_SUPPLY_PROP_CURRENT_NOW
POWER_SUPPLY_PROP_CURRENT_AVG
POWER_SUPPLY_PROP_CHARGE_FULL
POWER_SUPPLY_PROP_CYCLE_COUNT
POWER_SUPPLY_PROP_VOLTAGE_MAX
POWER_SUPPLY_PROP_CURRENT_MAX
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix potential memory corruption and panic in loopback for IB_WR_SEND
variants.
The code blindly assumes the posted length will fit in the fetched rwqe,
which is not a valid assumption.
Fix by adding a limit test, and triggering the appropriate send completion
and putting the QP in an error state. This mimics the handling for
non-loopback QPs.
Fixes: 1570346153 ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt")
Cc: <stable@vger.kernel.org> #v4.20+
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Applications that use the stack for execution purposes cause userspace PSM
jobs to fail during mmap().
Both Fortran (non-standard format parsing) and C (callback functions
located in the stack) applications can be written such that stack
execution is required. The linker notes this via the gnu_stack ELF flag.
This causes READ_IMPLIES_EXEC to be set which forces all PROT_READ mmaps
to have PROT_EXEC for the process.
Checking for VM_EXEC bit and failing the request with EPERM is overly
conservative and will break any PSM application using executable stacks.
Cc: <stable@vger.kernel.org> #v4.14+
Fixes: 1222026764 ("IB/hfi: Protect against writable mmap")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The work completion length for a receiving a UD send with immediate is
short by 4 bytes causing application using this opcode to fail.
The UD receive logic incorrectly subtracts 4 bytes for immediate
value. These bytes are already included in header length and are used to
calculate header/payload split, so the result is these 4 bytes are
subtracted twice, once when the header length subtracted from the overall
length and once again in the UD opcode specific path.
Remove the extra subtraction when handling the opcode.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the flags verification was added two flags were missed from the
check:
* MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
* MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC
This causes user applications that were using these flags to break.
Fixes: 2e43bb31b8 ("IB/mlx5: Verify that driver supports user flags")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Document support for the HSCIF serial ports in the Renesas R-Car M1A
(R8A7778) and H1 (R8A7779) SoCs.
No driver update is needed.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[geert: Patch description]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Take into account device rx stream in mt76x02_mac_process_rate
in order to not report wrong number of rx spatial stream to mac80211.
The issue has been reported on mt76x0 device which is 1x1:1 however
the hw sometimes reports rx nss equal to 2
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
To untangle objects a bit more, avoiding rebuilding the color_fprintf
routines when changes are made to the perf config headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/n/tip-8qvu2ek26antm3a8jyl4ocbq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These options are not present in some (all?) clang versions, so when we
build for a distro that has a gcc new enough to have these options and
that the distro python build config settings use them but clang doesn't
support, b00m.
This is the case with fedora rawhide (now gearing towards f30), so check
if clang has the and remove the missing ones from CFLAGS.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5q50q9w458yawgxf9ez54jbp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this patch, /proc/kallsyms will show BPF programs as
<addr> t bpf_prog_<tag>_<name> [bpf]
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-10-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can resolve symbols and map names.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-9-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
gfxclk for OD setting is limited to 1980M for non-acg
ASICs of Vega10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>