The hardware does not deal with multiple WCID entries for the same station
properly. Set IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR to avoid those cases
Signed-off-by: Felix Fietkau <nbd@nbd.name>
On MT76x2, the hardware does not report tx status in the FIFO register,
if the packet id is 0.
Change the allocation of packet IDs to use 0 for no-ack packets, 1 for
non-probing packets and 2-255 for packets with tx status requested.
Fixes rate control issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2.
Fixes: 0ea5b2fd38 ("arm64: dts: renesas: r8a77965: Add SCIF device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.
Fixes: dbcae5ea4b ("arm64: dts: r8a7796: Enable SCIF DMA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SCIF2 on RZ/G2M can be used with both DMAC1 and DMAC2.
Fixes: 3a3933a4fa ("arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The timer interrupts specified in commit 3652e2741f ("ARM: dts:
da850: Add clocks") are wrong but since the current timer code
hard-codes them, the bug was never spotted.
This patch must go into stable since, once we introduce a proper
clocksource driver, devices with buggy device tree will stop booting.
Fixes: 3652e2741f ("ARM: dts: da850: Add clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The custom setup/cleanup routines included in the ath79 driver only
take care of setting the initial CS state. However that is already
handled by the bitbang code, so this code can be removed.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow building this driver in compile test we need to remove all
dependency on headers from arch/mips/include. To allow this we
explicitly define all the registers locally instead of using
ar71xx_regs.h and we move the platform data struct definition to
include/linux/platform_data/spi-ath79.h.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
First of all this callback was slightly misused to setup the clock
polarity at the beginning of a transfer. Beside being at the wrong
place, it is also useless as only SPI mode 1 is supported. Instead
just make sure the base value used for IOC is suitable to start a
transfer by clearing the clock and data bits during the controller
setup.
This also remove the last direct usage of the GPIO API, so we can
remove the direct dependency on GPIOLIB.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
spi_setup() already call spi_set_cs() right after calling the
controller setup method, so there is no need for the bitbang driver to
do that. Because of this the chipselect() callback was confusingly
still called when CS is GPIO based.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a default pdata which can fit most HW design. So we don't need to
add a lot of DMI checking in this driver.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a math problem here which leads to a lot of static checker
warnings for me:
net/sunrpc/clnt.c:451 rpc_new_client() error: (-4096) too low for ERR_PTR
Error values are from -1 to -4095 or from 0xffffffff to 0xfffff001 in
hexadecimal. (I am assuming a 32 bit system for simplicity). We are
using the lowest two bits to hold some internal XArray data so the
error is shifted two spaces to the left. 0xfffff001 << 2 is 0xffffc004.
And finally we want to check that BIT(1) is set so we add 2 which gives
us 0xffffc006.
In other words, we should be checking that "entry >= 0xffffc006", but
the check is actually testing if "entry >= 0xffffc002".
Fixes: 76b4e52995 ("XArray: Permit storing 2-byte-aligned pointers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[Use xa_mk_internal() instead of changing the bracketing]
Signed-off-by: Matthew Wilcox <willy@infradead.org>
- Better manual-upload support for atomic
The new damage helper has the necessary pieces to make this work.
- tinydrm_gem_cma_prime_import_sg_table
This is now moved to the CMA helper and can be set using the
DRM_GEM_CMA_VMAP_DRIVER_OPS macro.
- tinydrm_fb_create
This is now covered by drm_gem_fb_create_with_dirty()
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-6-noralf@tronnes.org
This switches to drm_atomic_helper_dirtyfb() as the framebuffer dirty
handler. All flushing will now happen in the pipe functions.
Also enable the damage plane property for all except repaper which can
only do full updates.
ili9225:
This change made ili9225_init() equal to mipi_dbi_init() so use it.
v3: Include vblank header (Sam)
ili9225 and st7586 can't use mipi_dbi_enable_flush() (David)
v2: Remove fb check in mipi_dbi_enable_flush() it can't be NULL
(kbuild test robot)
Cc: David Lechner <david@lechnology.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: David Lechner <david@lechnology.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-5-noralf@tronnes.org
This prepares for the switch to drm_atomic_helper_dirtyfb() in the next
patch. The damage helper returns a drm_rect so switch to that everywhere
including using a pointer in the dirty functions.
This is a non-functional change except for the debug print which looks a
bit different.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-4-noralf@tronnes.org
Useful for drivers that only care about the combined damage.
v2: Remove unnecessary clearing of damage clips
Cc: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-3-noralf@tronnes.org
This adds a .fb_create helper that sets the .dirty callback to
drm_atomic_helper_dirtyfb().
v2: Improve docs (Daniel)
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-2-noralf@tronnes.org
CMA helper drivers have been converted to drm_fbdev_generic_setup()
so the fbdev code can be removed.
v3: Remove CMA specific conditional in the generic fbdev client
v2: Clean up the includes some more (Laurent)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114121059.20704-1-noralf@tronnes.org
An older GCC compiler complains:
kernel/bpf/verifier.c: In function 'bpf_check':
kernel/bpf/verifier.c:4***:13: error: 'prev_offset' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
} else if (krecord[i].insn_offset <= prev_offset) {
^
kernel/bpf/verifier.c:4***:38: note: 'prev_offset' was declared here
u32 i, nfuncs, urec_size, min_size, prev_offset;
Although the compiler is wrong here, the patch makes sure
that prev_offset is always initialized, just to silence the warning.
v2: fix a spelling error in the commit message.
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev says:
====================
This patch series add support for queue/stack manipulations.
It goes like this:
commands by permitting empty keys.
v2:
* removed unneeded jsonw_null from patch #6
* improved bash completions (and moved them into separate patch #7)
====================
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is intended to be used with queues and stacks, it pops and prints
the last element via bpf_map_lookup_and_delete_elem.
Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map push pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map pop pinned /sys/fs/bpf/q
value: 00 01 02 03
bpftool map pop pinned /sys/fs/bpf/q
Error: empty map
bpftool map create /sys/fs/bpf/s type stack value 4 entries 10 name s
bpftool map enqueue pinned /sys/fs/bpf/s value 0 1 2 3
bpftool map dequeue pinned /sys/fs/bpf/s
value: 00 01 02 03
bpftool map dequeue pinned /sys/fs/bpf/s
Error: empty map
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is intended to be used with queues and stacks and be more
user-friendly than 'update' without the key.
Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map push pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/q
value: 00 01 02 03
bpftool map create /sys/fs/bpf/s type stack value 4 entries 10 name s
bpftool map enqueue pinned /sys/fs/bpf/s value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/s
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is intended to be used with queues and stacks and be more
user-friendly than 'lookup' without key/value.
Example:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map peek pinned /sys/fs/bpf/q
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When doing dump or lookup, don't print key if key_size == 0 or value if
value_size == 0. The initial usecase is queue and stack, where we have
only values.
This is for regular output only, json still has all the fields.
Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
key: value: 00 01 02 03
After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bpftool expects key for 'lookup' operations. For some map types, key should
not be specified. Support looking up those map types.
Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
Error: did not find key
After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
key: value: 00 01 02 03
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bpftool expects both key and value for 'update' operations. For some
map types, key should not be specified. Support updating those map types.
Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
Error: did not find key
After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The kerneldoc comment for struct dma_fence_array lacks a description
of the "work" member, leading to this docs-build warning:
./include/linux/dma-fence-array.h:54: warning: Function parameter or member 'work' not described in 'dma_fence_array'
Add a description and make the warning go away.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116153436.3b244cda@lwn.net
Add support for octal mode I/O data transfer based on the controller (spi)
mode.
Assign hw-capability mask bits for octal transfer.
Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Add octal read flag for flash mt35xu512aba.
This flash, mt35xu512aba, is only complaint to SFDP JESD216B and does
not seem to support newer JESD216C standard that provides auto
detection of Octal mode capabilities and opcodes. Therefore, this
capability is manually added using new SPI_NOR_OCTAL_READ flag.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
- Add opcodes for octal I/O commands
* Read : 1-1-8 and 1-8-8 protocol
* Write : 1-1-8 and 1-8-8 protocol
* opcodes for 4-byte address mode command
- Entry of macros in _convert_3to4_xxx function
- Add flag SPI_NOR_OCTAL_READ specifying flash support octal read
commands. This flag is required for flashes which didn't provides
support for auto detection of Octal mode capabilities i.e. not
seems to support newer JESD216C standard.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
The dev field needs to be set when serio_register_port() is called,
because the open callback may use it (in the error handling path).
Fixes: commit af518342ef ("Input: olpc_apsp - check FIFO status on open(), not probe()")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Minor checkpatch fixes sprinkled on top of the changed lines.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14ed72e7f04c9340a057855c5950b54811f8a477.1547629303.git.jani.nikula@intel.com
There is not currently way to infer the port number through sysfs that
is being used as the CPU port number. Overlay a ndo_get_phys_port_name()
operation onto the DSA master network device in order to retrieve that
information.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since 83c0afaec7 ("net: dsa: Add new binding implementation"), DSA is
no longer a platform device exclusively and can support registering DSA
switches from other bus drivers (PCI, USB, I2C, etc.).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kvzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>