Commit graph

982,081 commits

Author SHA1 Message Date
Casey Schaufler
0c6cfa622c SELinux: Abstract use of cred security blob
Don't use the cred->security pointer directly.
Provide a helper function that provides the security blob pointer.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:44 -08:00
Casey Schaufler
b17103a8b8 Smack: Abstract use of cred security blob
Don't use the cred->security pointer directly.
Provide a helper function that provides the security blob pointer.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:44 -08:00
Casey Schaufler
6d9c939dbe procfs: add smack subdir to attrs
Back in 2007 I made what turned out to be a rather serious
mistake in the implementation of the Smack security module.
The SELinux module used an interface in /proc to manipulate
the security context on processes. Rather than use a similar
interface, I used the same interface. The AppArmor team did
likewise. Now /proc/.../attr/current will tell you the
security "context" of the process, but it will be different
depending on the security module you're using.

This patch provides a subdirectory in /proc/.../attr for
Smack. Smack user space can use the "current" file in
this subdirectory and never have to worry about getting
SELinux attributes by mistake. Programs that use the
old interface will continue to work (or fail, as the case
may be) as before.

The proposed S.A.R.A security module is dependent on
the mechanism to create its own attr subdirectory.

The original implementation is by Kees Cook.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:44 -08:00
Kees Cook
d117a154e6 capability: Initialize as LSM_ORDER_FIRST
This converts capabilities to use the new LSM_ORDER_FIRST position.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
2019-01-08 13:18:44 -08:00
Kees Cook
e2bc445b66 LSM: Introduce enum lsm_order
In preparation for distinguishing the "capability" LSM from other LSMs, it
must be ordered first. This introduces LSM_ORDER_MUTABLE for the general
LSMs and LSM_ORDER_FIRST for capability. In the future LSM_ORDER_LAST
for could be added for anything that must run last (e.g. Landlock may
use this).

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:43 -08:00
Kees Cook
d6aed64b74 Yama: Initialize as ordered LSM
This converts Yama from being a direct "minor" LSM into an ordered LSM.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
2019-01-08 13:18:43 -08:00
Kees Cook
70b62c2566 LoadPin: Initialize as ordered LSM
This converts LoadPin from being a direct "minor" LSM into an ordered LSM.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
2019-01-08 13:18:43 -08:00
Kees Cook
d8e9bbd4fa LSM: Split LSM preparation from initialization
Since we already have to do a pass through the LSMs to figure out if
exclusive LSMs should be disabled after the first one is seen as enabled,
this splits the logic up a bit more cleanly. Now we do a full "prepare"
pass through the LSMs (which also allows for later use by the blob-sharing
code), before starting the LSM initialization pass.

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:43 -08:00
Casey Schaufler
c91d8106b3 LSM: Add all exclusive LSMs to ordered initialization
This removes CONFIG_DEFAULT_SECURITY in favor of the explicit ordering
offered by CONFIG_LSM and adds all the exclusive LSMs to the ordered
LSM initialization. The old meaning of CONFIG_DEFAULT_SECURITY is now
captured by which exclusive LSM is listed first in the LSM order. All
LSMs not added to the ordered list are explicitly disabled.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2019-01-08 13:18:43 -08:00
Kees Cook
be6ec88f41 selinux: Remove SECURITY_SELINUX_BOOTPARAM_VALUE
In preparation for removing CONFIG_DEFAULT_SECURITY, this removes the
soon-to-be redundant SECURITY_SELINUX_BOOTPARAM_VALUE. Since explicit
ordering via CONFIG_LSM or "lsm=" will define whether an LSM is enabled or
not, this CONFIG will become effectively ignored, so remove it. However,
in order to stay backward-compatible with "security=selinux", the enable
variable defaults to true.

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:43 -08:00
Kees Cook
0102fb83f9 apparmor: Remove SECURITY_APPARMOR_BOOTPARAM_VALUE
In preparation for removing CONFIG_DEFAULT_SECURITY, this removes the
soon-to-be redundant SECURITY_APPARMOR_BOOTPARAM_VALUE. Since explicit
ordering via CONFIG_LSM or "lsm=" will define whether an LSM is enabled or
not, this CONFIG will become effectively ignored, so remove it. However,
in order to stay backward-compatible with "security=apparmor", the enable
variable defaults to true.

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:43 -08:00
Kees Cook
14bd99c821 LSM: Separate idea of "major" LSM from "exclusive" LSM
In order to both support old "security=" Legacy Major LSM selection, and
handling real exclusivity, this creates LSM_FLAG_EXCLUSIVE and updates
the selection logic to handle them.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
2019-01-08 13:18:43 -08:00
Kees Cook
7e611486d9 LSM: Refactor "security=" in terms of enable/disable
For what are marked as the Legacy Major LSMs, make them effectively
exclusive when selected on the "security=" boot parameter, to handle
the future case of when a previously major LSMs become non-exclusive
(e.g. when TOMOYO starts blob-sharing).

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
2019-01-08 13:18:43 -08:00
Kees Cook
5ef4e41918 LSM: Prepare for reorganizing "security=" logic
This moves the string handling for "security=" boot parameter into
a stored pointer instead of a string duplicate. This will allow
easier handling of the string when switching logic to use the coming
enable/disable infrastructure.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
2019-01-08 13:18:42 -08:00
Kees Cook
a8027fb0d1 LSM: Tie enabling logic to presence in ordered list
Until now, any LSM without an enable storage variable was considered
enabled. This inverts the logic and sets defaults to true only if the
LSM gets added to the ordered initialization list. (And an exception
continues for the major LSMs until they are integrated into the ordered
initialization in a later patch.)

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:42 -08:00
Kees Cook
79f7865d84 LSM: Introduce "lsm=" for boottime LSM selection
Provide a way to explicitly choose LSM initialization order via the new
"lsm=" comma-separated list of LSMs.

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:42 -08:00
Kees Cook
13e735c0e9 LSM: Introduce CONFIG_LSM
This provides a way to declare LSM initialization order via the new
CONFIG_LSM. Currently only non-major LSMs are recognized. This will
be expanded in future patches.

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:42 -08:00
Kees Cook
2d4d51198c LSM: Build ordered list of LSMs to initialize
This constructs an ordered list of LSMs to initialize, using a hard-coded
list of only "integrity": minor LSMs continue to have direct hook calls,
and major LSMs continue to initialize separately.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
2019-01-08 13:18:42 -08:00
Kees Cook
f4941d75b9 LSM: Lift LSM selection out of individual LSMs
As a prerequisite to adjusting LSM selection logic in the future, this
moves the selection logic up out of the individual major LSMs, making
their init functions only run when actually enabled. This considers all
LSMs enabled by default unless they specified an external "enable"
variable.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
2019-01-08 13:18:42 -08:00
Kees Cook
c5459b829b LSM: Plumb visibility into optional "enabled" state
In preparation for lifting the "is this LSM enabled?" logic out of the
individual LSMs, pass in any special enabled state tracking (as needed
for SELinux, AppArmor, and LoadPin). This should be an "int" to include
handling any future cases where "enabled" is exposed via sysctl which
has no "bool" type.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
2019-01-08 13:18:42 -08:00
Kees Cook
657d910b52 LSM: Provide separate ordered initialization
This provides a place for ordered LSMs to be initialized, separate from
the "major" LSMs. This is mainly a copy/paste from major_lsm_init() to
ordered_lsm_init(), but it will change drastically in later patches.

What is not obvious in the patch is that this change moves the integrity
LSM from major_lsm_init() into ordered_lsm_init(), since it is not marked
with the LSM_FLAG_LEGACY_MAJOR. As it is the only LSM in the "ordered"
list, there is no reordering yet created.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
2019-01-08 13:18:42 -08:00
Kees Cook
47008e5161 LSM: Introduce LSM_FLAG_LEGACY_MAJOR
This adds a flag for the current "major" LSMs to distinguish them when
we have a universal method for ordering all LSMs. It's called "legacy"
since the distinction of "major" will go away in the blob-sharing world.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
2019-01-08 13:18:42 -08:00
Ioana Ciornei
991e873223 soc: fsl: dpio: use a cpumask to identify which cpus are unused
The current implementation of the dpio driver uses a static next_cpu
variable to keep track of the index of the next cpu available. This
approach does not handle well unbinding and binding dpio devices in a
random order. For example, unbinding a dpio and then binding it again
with the driver, will generate the below error:

$ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/unbind
$ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/bind
[  103.946380] fsl_mc_dpio dpio.5: probe failed. Number of DPIOs exceeds
NR_CPUS.
[  103.955157] fsl_mc_dpio dpio.5: fsl_mc_driver_probe failed: -34
-bash: echo: write error: No such device

Fix this error by keeping a global cpumask of unused cpus that will be
updated at every dpaa2_dpio_[probe,remove].

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-08 14:15:37 -06:00
Ioana Ciornei
e181a569d8 soc: fsl: dpio: cleanup the cpu array on dpaa2_io_down
The dpio_by_cpu array should not contain a reference to a freed dpaa2_io
object. This patch adds the necessary cleanup in dpaa2_io_down.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-08 14:15:36 -06:00
Wolfram Sang
18569fa89a i2c: rcar: add suspend/resume support
Because the adapter will be set up before every transaction anyhow, we
just need to mark it as suspended to the I2C core.

Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:52 +01:00
Wolfram Sang
2088716f90 i2c: s3c2410: use core helper to mark adapter suspended
Rejecting transfers should be handled by the core. Also, this will
ensure proper locking which was forgotten in this open coded version.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:52 +01:00
Wolfram Sang
d5c95bd6f3 i2c: exynos5: use core helper to mark adapter suspended
Rejecting transfers should be handled by the core. Also, this will
ensure proper locking which was forgotten in this open coded version.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:51 +01:00
Wolfram Sang
5a7b81ff1b i2c: sprd: use core helper to mark adapter suspended
Rejecting transfers should be handled by the core.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:50 +01:00
Wolfram Sang
7b6b69984e i2c: sprd: don't use pdev as variable name for struct device *
The pointer to a device is usually named 'dev'. These 'pdev' here look
much like copy&paste errors. Fix them to avoid confusion.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:50 +01:00
Wolfram Sang
5601df355b i2c: zx2967: use core helper to mark adapter suspended
Rejecting transfers should be handled by the core. Also, this will
ensure proper locking which was forgotten in this open coded version
and make sure resume mark is set after enabling clocks (not before).

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:49 +01:00
Wolfram Sang
f2e0d28cba i2c: brcmstb: use core helper to mark adapter suspended
Rejecting transfers should be handled by the core.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:49 +01:00
Wolfram Sang
1adcc83e21 i2c: synquacer: remove unused is_suspended flag
This flag was defined and checked but never set a value. Remove it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:02:48 +01:00
Wolfram Sang
9ac6cb5fbb i2c: add suspended flag and accessors for i2c adapters
A few drivers open code the handling of suspended adapters. It could be
handled by the core, though, to ensure generic handling. This patch adds
the flag and accessor functions. The usage of these helpers is optional,
though. See the kerneldoc in this patch. Using the new flag, we now
reject further transfers if the adapter is already marked suspended.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08 21:01:07 +01:00
Sudeep Holla
31f031f73a ARM: dts: at91: replace gpio-key,wakeup with wakeup-source property
Most of the legacy "gpio-key,wakeup" property are already replaced
with "wakeup-source". However few occurrences of old property has
popped up again, probably from the remnants in downstream trees.
Almost all of those were remove couple of years back.

Replace the legacy properties with the unified "wakeup-source"
property introduced in the commit 700a38b27e ("Input: gpio_keys -
switch to using generic device properties")

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-08 19:12:40 +01:00
Claudiu Beznea
c2dfab7e40 ARM: dts: at91: at91-sama5d27_som1_ek: enable qspi1 memory
Enable qspi1.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-08 19:12:30 +01:00
Claudiu Beznea
26b933b943 ARM: dts: at91: at91-sama5d27_som1: add QSPI1 + SPI NOR memory nodes
Configure the QSPI1 controller pin muxing and declare the
jedec,spi-nor memory (SST26VF064).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[tudor.ambarus@microchip.com: add spi-rx/tx-bus-width, drop partitions,
reword commit.]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-08 19:12:30 +01:00
Peter Wu
00eb5b0da8 drm/fb-helper: fix leaks in error path of drm_fb_helper_fbdev_setup
After drm_fb_helper_fbdev_setup calls drm_fb_helper_init,
"dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will
have some effect). After that, drm_fb_helper_initial_config is called
which may call the "fb_probe" driver callback.

This driver callback may call drm_fb_helper_defio_init (as is done by
drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs)
as documented. These are normally cleaned up on exit by
drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini.

If an error occurs after "fb_probe", but before setup is complete, then
calling just drm_fb_helper_fini will leak resources. This was triggered
by df2052cc92 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"):

    [   50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
    [   50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38)
    [   50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2
    [   50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0
    [   50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G                T 4.20.0-rc7 #1
    [   50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0
    ...
    [   50.023155] Call Trace:
    [   50.023155]  ? bochs_kms_fini+0x1e/0x30
    [   50.023155]  ? bochs_unload+0x18/0x40

This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n.

Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian
Link: https://lkml.kernel.org/r/20181223004315.GA11455@al
Fixes: 8741216396 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl
2019-01-08 18:47:46 +01:00
Noralf Trønnes
6e1490cf43 drm/fb-helper: generic: Fix setup error path
If register_framebuffer() fails during fbdev setup we will leak the
framebuffer, the GEM buffer and the shadow buffer for defio. This is
because drm_fb_helper_fbdev_setup() just calls drm_fb_helper_fini() on
error not taking into account that register_framebuffer() can fail.

Since the generic emulation uses DRM client for its framebuffer and
backing buffer in addition to a shadow buffer, it's necessary to open code
drm_fb_helper_fbdev_setup() to properly handle the error path.

Error cleanup is removed from .fb_probe and is handled by one function for
all paths.

Fixes: 9060d7f493 ("drm/fb-helper: Finish the generic fbdev emulation")
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105181846.26495-1-noralf@tronnes.org
2019-01-08 18:46:16 +01:00
Trond Myklebust
6a829eb861 SUNRPC: Fix TCP receive code on archs with flush_dcache_page()
After receiving data into the page cache, we need to call flush_dcache_page()
for the architectures that define it.

Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching...")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-08 12:44:51 -05:00
David Herrmann
7b55851367 fork: record start_time late
This changes the fork(2) syscall to record the process start_time after
initializing the basic task structure but still before making the new
process visible to user-space.

Technically, we could record the start_time anytime during fork(2).  But
this might lead to scenarios where a start_time is recorded long before
a process becomes visible to user-space.  For instance, with
userfaultfd(2) and TLS, user-space can delay the execution of fork(2)
for an indefinite amount of time (and will, if this causes network
access, or similar).

By recording the start_time late, it much closer reflects the point in
time where the process becomes live and can be observed by other
processes.

Lastly, this makes it much harder for user-space to predict and control
the start_time they get assigned.  Previously, user-space could fork a
process and stall it in copy_thread_tls() before its pid is allocated,
but after its start_time is recorded.  This can be misused to later-on
cycle through PIDs and resume the stalled fork(2) yielding a process
that has the same pid and start_time as a process that existed before.
This can be used to circumvent security systems that identify processes
by their pid+start_time combination.

Even though user-space was always aware that start_time recording is
flaky (but several projects are known to still rely on start_time-based
identification), changing the start_time to be recorded late will help
mitigate existing attacks and make it much harder for user-space to
control the start_time a process gets assigned.

Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08 09:40:53 -08:00
YueHaibing
8e11403876 f2fs: remove set but not used variable 'err'
Fixes gcc '-Wunused-but-set-variable' warning:

fs/f2fs/data.c: In function 'f2fs_dio_submit_bio':
fs/f2fs/data.c:2585:6: warning:
 variable 'err' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-01-08 09:34:27 -08:00
Zhikang Zhang
539cd35223 f2fs: fix compile warnings: 'struct *' declared inside parameter list
We meet these compile warnings below, which caused by missing declare structs:
struct f2fs_io_info, struct extent, struct f2fs_sb_info.

warning: 'struct f2fs_io_info' declared inside parameter list
warning: 'struct extent_info' declared inside parameter list
warning: 'struct f2fs_sb_info' declared inside parameter list

Signed-off-by: Zhikang Zhang <zhangzhikang1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-01-08 09:34:27 -08:00
Chengguang Xu
f365c6cc85 f2fs: change error code to -ENOMEM from -EINVAL
The error case of failing allocating memory should
return -ENOMEM.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-01-08 09:34:27 -08:00
Jaegeuk Kim
7c77bf7de1 f2fs: don't access node/meta inode mapping after iput
This fixes wrong access of address spaces of node and meta inodes after iput.

Fixes: 60aa4d5536 ("f2fs: fix use-after-free issue when accessing sbi->stat_info")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-01-08 09:34:27 -08:00
Jaegeuk Kim
31867b23d7 f2fs: wait on atomic writes to count F2FS_CP_WB_DATA
Otherwise, we can get wrong counts incurring checkpoint hang.

IO_W (CP:  -24, Data:   24, Flush: (   0    0    1), Discard: (   0    0))

Thread A                        Thread B
- f2fs_write_data_pages
 -  __write_data_page
  - f2fs_submit_page_write
   - inc_page_count(F2FS_WB_DATA)
     type is F2FS_WB_DATA due to file is non-atomic one
- f2fs_ioc_start_atomic_write
 - set_inode_flag(FI_ATOMIC_FILE)
                                - f2fs_write_end_io
                                 - dec_page_count(F2FS_WB_CP_DATA)
                                   type is F2FS_WB_DATA due to file becomes
                                   atomic one

Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-01-08 09:34:27 -08:00
Arnaldo Carvalho de Melo
ee412f1469 tools include uapi: Sync linux/vhost.h with the kernel sources
To get the changes in:

  4b86713236 ("vhost: split structs into a separate header file")

Silencing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

Those didn't touch things used in tools, i.e. the following continues
working:

  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh
  static const char *vhost_virtio_ioctl_cmds[] = {
          [0x00] = "SET_FEATURES",
          [0x01] = "SET_OWNER",
          [0x02] = "RESET_OWNER",
          [0x03] = "SET_MEM_TABLE",
          [0x04] = "SET_LOG_BASE",
          [0x07] = "SET_LOG_FD",
          [0x10] = "SET_VRING_NUM",
          [0x11] = "SET_VRING_ADDR",
          [0x12] = "SET_VRING_BASE",
          [0x13] = "SET_VRING_ENDIAN",
          [0x14] = "GET_VRING_ENDIAN",
          [0x20] = "SET_VRING_KICK",
          [0x21] = "SET_VRING_CALL",
          [0x22] = "SET_VRING_ERR",
          [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT",
          [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT",
          [0x25] = "SET_BACKEND_FEATURES",
          [0x30] = "NET_SET_BACKEND",
          [0x40] = "SCSI_SET_ENDPOINT",
          [0x41] = "SCSI_CLEAR_ENDPOINT",
          [0x42] = "SCSI_GET_ABI_VERSION",
          [0x43] = "SCSI_SET_EVENTS_MISSED",
          [0x44] = "SCSI_GET_EVENTS_MISSED",
          [0x60] = "VSOCK_SET_GUEST_CID",
          [0x61] = "VSOCK_SET_RUNNING",
  };
  static const char *vhost_virtio_ioctl_read_cmds[] = {
          [0x00] = "GET_FEATURES",
          [0x12] = "GET_VRING_BASE",
          [0x26] = "GET_BACKEND_FEATURES",
  };
  $

At some point in the eBPFication of perf, using something like:

	# perf trace -e ioctl(cmd=VHOST_VRING*)

Will setup a BPF filter right at the raw_syscalls:sys_enter tracepoint,
i.e. filtering at the origin.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-g28usrt7l59lwq3wuh8vzbig@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:33 -03:00
Arnaldo Carvalho de Melo
fdc42ca190 tools include uapi: Sync linux/fs.h copy with the kernel sources
To get the changes in:

  e262e32d6b ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled")

That made the mount flags string table generator to switch to using
mount.h instead.

This silences the following perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mosz81pa6iwxko4p2owbm3ss@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:33 -03:00
Arnaldo Carvalho de Melo
1c23397d2a perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
As now we'll update our fs.h copy and what tools/perf/trace/beauty/mount_flags.sh
needs just got moved to mount.h, use that instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ls19h376xukeouxrw9dswkcn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:33 -03:00
Arnaldo Carvalho de Melo
250bfc87dd tools include uapi: Grab a copy of linux/mount.h
We were using a copy of uapi/linux/fs.h to create the mount syscall
'flags' string table to use in 'perf trace', to convert from the number
obtained via the raw_syscalls:sys_enter into a string, using
tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6b ("vfs:
Suppress MS_* flag defs within the kernel unless explicitly enabled")
those defines got moved to linux/mount.h, so grab a copy of mount.h too.

Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i2ricmpwpdrpukfq3298jr1z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08 14:09:28 -03:00
Andy Shevchenko
bdcb2c5d5e dmaengine: dw-axi-dmac: Fix trivia typo
Field name ststus_hi should be spelled as status_hi.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-08 22:36:18 +05:30