Commit graph

982,081 commits

Author SHA1 Message Date
Xiang Xiao
60042a22be remoteproc: debug: add crash debugfs node
so we can trigger the crash manully which could:
1.test the crash handling code path more easily
2.update the firmware without reboot kernel

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-06 23:02:13 -08:00
Dan Williams
8fc5c73554 acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
Persistent memory, as described by the ACPI NFIT (NVDIMM Firmware
Interface Table), is the first known instance of a memory range
described by a unique "target" proximity domain. Where "initiator" and
"target" proximity domains is an approach that the ACPI HMAT
(Heterogeneous Memory Attributes Table) uses to described the unique
performance properties of a memory range relative to a given initiator
(e.g. CPU or DMA device).

Currently the numa-node for a /dev/pmemX block-device or /dev/daxX.Y
char-device follows the traditional notion of 'numa-node' where the
attribute conveys the closest online numa-node. That numa-node attribute
is useful for cpu-binding and memory-binding processes *near* the
device. However, when the memory range backing a 'pmem', or 'dax' device
is onlined (memory hot-add) the memory-only-numa-node representing that
address needs to be differentiated from the set of online nodes. In
other words, the numa-node association of the device depends on whether
you can bind processes *near* the cpu-numa-node in the offline
device-case, or bind process *on* the memory-range directly after the
backing address range is onlined.

Allow for the case that platform firmware describes persistent memory
with a unique proximity domain, i.e. when it is distinct from the
proximity of DRAM and CPUs that are on the same socket. Plumb the Linux
numa-node translation of that proximity through the libnvdimm region
device to namespaces that are in device-dax mode. With this in place the
proposed kmem driver [1] can optionally discover a unique numa-node
number for the address range as it transitions the memory from an
offline state managed by a device-driver to an online memory range
managed by the core-mm.

[1]: https://lore.kernel.org/lkml/20181022201317.8558C1D8@viggo.jf.intel.com

Reported-by: Fan Du <fan.du@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:41:57 -08:00
Dan Williams
730926c3b0 device-dax: Add /sys/class/dax backwards compatibility
On the expectation that some environments may not upgrade libdaxctl
(userspace component that depends on the /sys/class/dax hierarchy),
provide a default / legacy dax_pmem_compat driver. The dax_pmem_compat
driver implements the original /sys/class/dax sysfs layout rather than
/sys/bus/dax. When userspace is upgraded it can blacklist this module
and switch to the dax_pmem driver going forward.

CONFIG_DEV_DAX_PMEM_COMPAT and supporting code will be deleted according
to the dax_pmem entry in Documentation/ABI/obsolete/.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:41:57 -08:00
Dan Williams
d200781ef2 device-dax: Add support for a dax override driver
Introduce the 'new_id' concept for enabling a custom device-driver attach
policy for dax-bus drivers. The intended use is to have a mechanism for
hot-plugging device-dax ranges into the page allocator on-demand. With
this in place the default policy of using device-dax for performance
differentiated memory can be overridden by user-space policy that can
arrange for the memory range to be managed as 'System RAM' with
user-defined NUMA and other performance attributes.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:41:55 -08:00
Dan Williams
89ec9f2cfa device-dax: Move resource pinning+mapping into the common driver
Move the responsibility of calling devm_request_resource() and
devm_memremap_pages() into the common device-dax driver. This is another
preparatory step to allowing an alternate personality driver for a
device-dax range.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:26:21 -08:00
Dan Williams
9567da0b40 device-dax: Introduce bus + driver model
In support of multiple device-dax instances per device-dax-region and
allowing the 'kmem' driver to attach to dax-instances instead of the
current device-node access, convert the dax sub-system from a class to a
bus. Recall that the kmem driver takes reserved / special purpose
memories and assigns them to be managed by the core-mm.

Aside from the fact the device-dax instances are registered and probed
on a bus, two other lifetime-management changes are made:

1/ Delay attaching a cdev until driver probe time

2/ A new run_dax() helper is introduced to allow restoring dax-operation
   after a kill_dax() event. So, at driver ->probe() time we run_dax()
   and at ->remove() time we kill_dax() and invalidate all mappings.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:24:46 -08:00
Dan Williams
51cf784c42 device-dax: Start defining a dax bus model
Towards eliminating the dax_class, move the dax-device-attribute
enabling to a new bus.c file in the core. The amount of code
thrash of sub-sequent patches is reduced as no logic changes are made,
just pure code movement.

A temporary export of unregister_dex_dax() and dax_attribute_groups is
needed to preserve compilation, but those symbols become static again in
a follow-on patch.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:24:46 -08:00
Dan Williams
753a0850e7 device-dax: Remove multi-resource infrastructure
The multi-resource implementation anticipated discontiguous sub-division
support. That has not yet materialized, delete the infrastructure and
related code.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:24:46 -08:00
Dan Williams
93694f9630 device-dax: Kill dax_region base
Nothing consumes this attribute of a region and devres otherwise
remembers the value for de-allocation purposes.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:24:46 -08:00
Dan Williams
21b9e97950 device-dax: Kill dax_region ida
Commit bbb3be170a "device-dax: fix sysfs duplicate warnings" arranged
for passing a dax instance-id to devm_create_dax_dev(), rather than
generating one internally. Remove the dax_region ida and related code.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:24:45 -08:00
Andrea Merello
b8349172b4 dmaengine: xilinx_dma: Drop SG support for VDMA IP
xilinx_vdma_start_transfer() is used only for VDMA IP, still it contains
conditional code on has_sg variable. has_sg is set only whenever the HW
does support SG mode, that is never true for VDMA IP.

This patch drops the never-taken branches.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:53:12 +05:30
Andrea Merello
29b9ee4a0c dt-bindings: dmaengine: xilinx_dma: drop include-sg property
This property is not needed anymore, because the driver now autodetects it.
Delete references in documentation.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:53:12 +05:30
Andrea Merello
05f7ea7f6e dmaengine: xilinx_dma: autodetect whether the HW supports scatter-gather
The AXIDMA and CDMA HW can be either direct-access or scatter-gather
version. These are SW incompatible.

The driver can handle both versions: a DT property was used to
tell the driver whether to assume the HW is in scatter-gather mode.

This patch makes the driver to autodetect this information. The DT
property is not required anymore.

No changes for VDMA.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:53:12 +05:30
Radhey Shyam Pandey
ae809690b4 dmaengine: xilinx_dma: program hardware supported buffer length
AXI-DMA IP supports configurable (c_sg_length_width) buffer length
register width, hence read buffer length (xlnx,sg-length-width) DT
property and ensure that driver doesn't program buffer length
exceeding the supported limit. For VDMA and CDMA there is no change.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com> [rebase, reword]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:53:11 +05:30
Andrea Merello
7df54dbeb0 dt-bindings: dmaengine: xilinx_dma: add optional xlnx,sg-length-width property
The width of the "length register" cannot be autodetected, and it is now
specified with a DT property. Add documentation for it.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:53:11 +05:30
Andrea Merello
5c094d4cac dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
Whenever a single or cyclic transaction is prepared, the driver
could eventually split it over several SG descriptors in order
to deal with the HW maximum transfer length.

This could end up in DMA operations starting from a misaligned
address. This seems fatal for the HW if DRE (Data Realignment Engine)
is not enabled.

This patch eventually adjusts the transfer size in order to make sure
all operations start from an aligned address.

Cc: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:53:11 +05:30
Andrea Merello
616f0f81d8 dmaengine: xilinx_dma: commonize DMA copy size calculation
This patch removes a bit of duplicated code by introducing a new
function that implements calculations for DMA copy size, and
prepares for changes to the copy size calculation that will
happen in following patches.

Suggested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:53:11 +05:30
Ben Dooks
95f295f9fe dmaengine: tegra: add tracepoints to driver
Add some trace-points to the driver to allow for debuging via the
trace pipe.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:42 +05:30
Ben Dooks
65c383c780 dmaengine: tegra: reduce channel name field size
The name field is used for "apbdma.%d" which is rarely going to be
more than 10 bytes, so reduce the size from 30 to 12. This is only
being used by the interrupt registration, so is not critical to the
operation of the driver either.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:42 +05:30
Ben Dooks
547b311cf7 dmaengine: tegra: fix incorrect case of DMA
The use of Dma is annoying, since it is an acronym so should be all
upper case. Fix this throughout the driver.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:42 +05:30
Ben Dooks
216a1d7da0 dmaengine: tegra: make byte counters unsigned int
The buffer byte request length and counter are declared as signed integers
but the values should never be below zero, so make these unsigned integers
instead.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:41 +05:30
Ben Dooks
e486df3930 dmaengine: tegra: avoid overflow of byte tracking
The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.

When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:41 +05:30
Pierre-Yves MORDRET
89e987e3b4 dmaengine: stm32-mdma: Add PM Runtime support
Use pm_runtime engine for clock management purpose

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:24 +05:30
Pierre-Yves MORDRET
4f3ceca254 dmaengine: stm32-dmamux: Add PM Runtime support
Use pm_runtime engine for clock management purpose.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:24 +05:30
Pierre-Yves MORDRET
48bc73ba14 dmaengine: stm32-dma: Add PM Runtime support
Use pm_runtime engine for clock management purpose.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:24 +05:30
Pierre-Yves MORDRET
ca4c72c01e dmaengine: stm32-dma: check FIFO error interrupt enable
For avoiding false FIFO detection, check FIFO Error interrupt is
enabled prior raising any errors.
This will prevent having spurious FIFO error where it shouldn't.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:24 +05:30
Aditya Pakki
906b40b246 dmaengine: stm32-mdma: Add a check on read_u32_array
In stm32_mdma_probe, after reading the property "st,ahb-addr-masks", the
second call is not checked for failure. This time of check to time of use
case of "count" error is sent upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:52:24 +05:30
Aditya Pakki
a474b3f042 dmaengine: qcom_hidma: Check for driver register failure
While initializing the driver, the function platform_driver_register can
fail and return an error. Consistent with other invocations, this patch
returns the error upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:50:39 +05:30
Aditya Pakki
7c97381e7a dmaengine: mv_xor: Fix a missing check in mv_xor_channel_add
dma_async_device_register() may fail and return an error. The capabilities
checked in mv_xor_channel_add() are not complete. The fix handles the
error by freeing the resources.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:50:29 +05:30
Arnd Bergmann
279cc97c01 dmaengine: fsl-qdma: add MODULE_LICENSE
The newly added driver lacks a MODULE_LICENSE tag, which now produces
a warning:

WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/fsl-qdma.o

Add the license according to the SPDX specifier.

Fixes: 75628c149b0d ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:50:16 +05:30
Peng Ma
9e2b9d3490 dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
Document the devicetree bindings for NXP Layerscape qDMA controller
which could be found on NXP QorIQ Layerscape SoCs.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:50:16 +05:30
Peng Ma
b092529e0a dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
NXP Queue DMA controller(qDMA) on Layerscape SoCs supports channel
virtuallization by allowing DMA jobs to be enqueued into different
command queues.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Jiaheng Fan <jiaheng.fan@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:50:16 +05:30
Peng Ma
a1ff82a9c1 dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
This patch add the macro FSL_DMA_IN/OUT implement for ARM platform.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:50:16 +05:30
Wen He
a7359e762f dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
This patch implement a standard macro call functions is
used to NXP dma drivers.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:50:16 +05:30
Julia Lawall
de2c45314d dmaengine: sa11x0: drop useless LIST_HEAD
Drop LIST_HEAD where the variable it declares has never been
used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: 4a533218fc ("dmaengine: sa11x0: Split device_control")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:49:26 +05:30
Julia Lawall
4f194969c3 dmaengine: pl330: drop useless LIST_HEAD
Drop LIST_HEAD where the variable it declares is never used.

The variable has not been used since the function was introduced
in 740aa95703 ("dmaengine: pl330: Split device_control").

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: 740aa95703 ("dmaengine: pl330: Split device_control")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:49:26 +05:30
Julia Lawall
3c763b3888 dmaengine: st_fdma: drop useless LIST_HEAD
Drop LIST_HEAD where the variable it declares is never used.

The declarations were introduced with the file, but the declared
variables were not used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: 6b4cd727ea ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:49:26 +05:30
Julia Lawall
1bd09f869f dmaengine: dw: drop useless LIST_HEAD
Drop LIST_HEAD where the variable it declares is never used.

Commit ab703f818a ("dmaengine: dw: lazy allocation of dma
descriptors") removed the uses, but not the declaration.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: ab703f818a ("dmaengine: dw: lazy allocation of dma descriptors")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:49:26 +05:30
Julia Lawall
e7987a0659 dmaengine: at_hdmac: drop useless LIST_HEAD
Drop LIST_HEAD where the variable it declares is never used.

tmp_list has been declared since the introduction of the driver
and has never been used.  The two declarations of list were
introduced with the containing functions but were also not used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: dc78baa2b9 ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Fixes: 4facfe7f09 ("dmaengine: hdmac: Split device_control")
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 09:49:26 +05:30
Wei Yongjun
07bd14ccc3 hwmon: (lm80) Fix missing unlock on error in set_fan_div()
Add the missing unlock before return from function set_fan_div()
in the error handling case.

Fixes: c9c6391551 ("hwmon: (lm80) fix a missing check of the status of SMBus read")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-01-06 19:49:14 -08:00
Guenter Roeck
9de15c95a6 hwmon: (nct6775) Enable IO mapping for NCT6797D and NCT6798D
Similar to other recent chips from Nuvoton, IO mapping may be disabled
by default. Enable it when instantiating the driver and after resume.

Fixes: 0599682b82 ("hwmon: (nct6775) Add support for NCT6798D")
Fixes: e41da286a2 ("hwmon: (nct6775) Add support for NCT6797D")
Reported-by: Michael Cook <mcook@mackal.net>
Cc: Michael Cook <mcook@mackal.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-01-06 19:49:14 -08:00
Guenter Roeck
264142bc70 hwmon: (nct6775) Fix chip ID for NCT6798D
The chip ID is 0xd42[8-f], not 0xd45[8-f].

Fixes: 0599682b82 ("hwmon: (nct6775) Add support for NCT6798D")
Reported-by: Michael Cook <mcook@mackal.net>
Cc: Michael Cook <mcook@mackal.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-01-06 19:49:14 -08:00
Matthew Wilcox
b0606fed6e XArray: Honour reserved entries in xa_insert
xa_insert() should treat reserved entries as occupied, not as available.
Also, it should treat requests to insert a NULL pointer as a request
to reserve the slot.  Add xa_insert_bh() and xa_insert_irq() for
completeness.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06 22:12:58 -05:00
Matthew Wilcox
76b4e52995 XArray: Permit storing 2-byte-aligned pointers
On m68k, statically allocated pointers may only be two-byte aligned.
This clashes with the XArray's method for tagging internal pointers.
Permit storing these pointers in single slots (ie not in multislots).

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06 22:12:57 -05:00
Matthew Wilcox
4a31896c5b XArray: Change xa_for_each iterator
There were three problems with this API:
1. It took too many arguments; almost all users wanted to iterate over
every element in the array rather than a subset.
2. It required that 'index' be initialised before use, and there's no
realistic way to make GCC catch that.
3. 'index' and 'entry' were the opposite way round from every other
member of the XArray APIs.

So split it into three different APIs:

xa_for_each(xa, index, entry)
xa_for_each_start(xa, index, entry, start)
xa_for_each_marked(xa, index, entry, filter)

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06 21:24:43 -05:00
Matthew Wilcox
02669b17a4 XArray: Turn xa_init_flags into a static inline
A regular xa_init_flags() put all dynamically-initialised XArrays into
the same locking class.  That leads to lockdep believing that taking
one XArray lock while holding another is a deadlock.  It's possible to
work around some of these situations with separate locking classes for
irq/bh/regular XArrays, and SINGLE_DEPTH_NESTING, but that's ugly, and
it doesn't work for all situations (where we have completely unrelated
XArrays).

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06 21:24:43 -05:00
Matthew Wilcox
490fd30f85 XArray tests: Add RCU locking
0day picked up that I'd forgotten to add locking to this new test.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06 21:24:43 -05:00
Masahiro Yamada
3bd6e94bec arch: restore generic-y += shmparam.h for some architectures
For some reasons, I accidentally got rid of "generic-y += shmparam.h"
from some architectures.

Restore them to fix building c6x, h8300, hexagon, m68k, microblaze,
openrisc, and unicore32.

Fixes: d6e4b3e326 ("arch: remove redundant UAPI generic-y defines")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06 18:16:11 -08:00
Linus Torvalds
bfeffd1552 Linux 5.0-rc1 v5.0-rc1 2019-01-06 17:08:20 -08:00
Linus Torvalds
85e1ffbd42 Kbuild late updates for v4.21
- improve boolinit.cocci and use_after_iter.cocci semantic patches
 
 - fix alignment for kallsyms
 
 - move 'asm goto' compiler test to Kconfig and clean up jump_label
   CONFIG option
 
 - generate asm-generic wrappers automatically if arch does not implement
   mandatory UAPI headers
 
 - remove redundant generic-y defines
 
 - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcMV5GAAoJED2LAQed4NsGs9gQAI/oGg8wJgk9a7+dJCX245W5
 F4ReftnQd4AFptFCi9geJkr+sfViXNgwPLqlJxiXz8Qe8XP7z3LcArDw3FUzwvGn
 bMSBiN9ggwWkOFgF523XesYgUVtcLpkNch/Migzf1Ac0FHk0G9o7gjcdsvAWHkUu
 qFwtNcUB6PElRbhsHsh5qCY1/6HaAXgf/7O7wztnaKRe9myN6f2HzT4wANS9HHde
 1e1r0LcIQeGWfG+3va3fZl6SDxSI/ybl244OcDmDyYl6RA1skSDlHbIBIFgUPoS0
 cLyzoVj+GkfI1fRFEIfou+dj7lpukoAXHsggHo0M+ofqtbMF+VB2T3jvg4txanCP
 TXzDc+04QUguK5yVnBfcnyC64Htrhnbq0eGy43kd1VZWAEGApl+680P8CRsWU3ZV
 kOiFvZQ6RP/Ssw+a42yU3SHr31WD7feuQqHU65osQt4rdyL5wnrfU1vaUvJSkltF
 cyPr9Kz/Ism0kPodhpFkuKxwtlKOw6/uwdCQoQHtxAPkvkcydhYx93x3iE0nxObS
 CRMximiRyE12DOcv/3uv69n0JOPn6AsITcMNp8XryASYrR2/52txhGKGhvo3+Zoq
 5pwc063JsuxJ/5/dcOw/erQar5d1eBRaBJyEWnXroxUjbsLPAznE+UIN8tmvyVly
 SunlxNOXBdYeWN6t6S3H
 =I+r6
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - improve boolinit.cocci and use_after_iter.cocci semantic patches

 - fix alignment for kallsyms

 - move 'asm goto' compiler test to Kconfig and clean up jump_label
   CONFIG option

 - generate asm-generic wrappers automatically if arch does not
   implement mandatory UAPI headers

 - remove redundant generic-y defines

 - misc cleanups

* tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: rename generated .*conf-cfg to *conf-cfg
  kbuild: remove unnecessary stubs for archheader and archscripts
  kbuild: use assignment instead of define ... endef for filechk_* rules
  arch: remove redundant UAPI generic-y defines
  kbuild: generate asm-generic wrappers if mandatory headers are missing
  arch: remove stale comments "UAPI Header export list"
  riscv: remove redundant kernel-space generic-y
  kbuild: change filechk to surround the given command with { }
  kbuild: remove redundant target cleaning on failure
  kbuild: clean up rule_dtc_dt_yaml
  kbuild: remove UIMAGE_IN and UIMAGE_OUT
  jump_label: move 'asm goto' support test to Kconfig
  kallsyms: lower alignment on ARM
  scripts: coccinelle: boolinit: drop warnings on named constants
  scripts: coccinelle: check for redeclaration
  kconfig: remove unused "file" field of yylval union
  nds32: remove redundant kernel-space generic-y
  nios2: remove unneeded HAS_DMA define
2019-01-06 16:33:10 -08:00