Commit graph

982,081 commits

Author SHA1 Message Date
Michael Straube
7acaed81ab staging: rtl8188eu: add blank line after declarations
Add a missing blank line after declarations in rtw_mlme_ext.c.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:30:29 +01:00
Michael Straube
f20ac243ff staging: rtl8188eu: remove blank lines between declarations
Remove blank lines between declarations in rtw_mlme_ext.c.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:30:29 +01:00
Michael Straube
83691365f1 staging: rtl8188eu: remove commented declarations in rtw_mlme_ext.c
Remove unused/commented declarations.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:30:29 +01:00
Michael Straube
1673616a00 staging: rtl8188eu: replace tabs with spaces in rtw_mlme_ext.c
Replace tabs with spaces where appropriate.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:29:29 +01:00
Michael Straube
502b90d4c6 staging: rtl8188eu: cleanup declarations in rtw_mlme_ext.c
Replace tabs with spaces and/or remove spaces in declarations.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:29:28 +01:00
YueHaibing
b57f944785 staging: fbtft: fix strncmp() size warning
strncmp() stops comparing when either the end of one of the first two
arguments is reached or when 'n' characters have been compared, whichever
comes first.That means that strncmp(s1, s2, n) is equivalent to
strcmp(s1, s2) if n exceeds the length of s1 or the length of s2.

This patch avoids that the following warning is reported by smatch:

drivers/staging/fbtft/fbtft_device.c:1458
 fbtft_device_init() error: strncmp() '"list"' too small (5 vs 32)

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:29:28 +01:00
Colin Ian King
a86028f8e3 staging: most: sound: replace snprintf with strscpy
Using snprintf without a format specifier is potentially risky if
the string device_name contains format specifiers. Replace this with
the safer and more efficient strscpy.

Cleans up clang warning:
drivers/staging/most/sound/sound.c:673:41: warning: format string is not
a string literal (potentially insecure) [-Wformat-security]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:28:22 +01:00
Aisheng Dong
9d84d3e6bd dt-bindings: serial: lpuart: add imx8qxp compatible string
Add imx8qxp compatible string

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:24:36 +01:00
Nava kishore Manne
260683137a serial: uartps: Fix interrupt mask issue to handle the RX interrupts properly
This patch Correct the RX interrupt mask value to handle the
RX interrupts properly.

Fixes: c8dbdc842d ("serial: xuartps: Rewrite the interrupt handling logic")
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:23:20 +01:00
Michal Simek
32cf21ac4e serial: uartps: Fix error path when alloc failed
When cdns_uart_console allocation failed there is a need to also clear
ID from ID list.

Fixes: ae1cca3fa3 ("serial: uartps: Change uart ID port allocation")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:23:20 +01:00
Shubhrajyoti Datta
82b1b2ec5d serial: uartps: Check if the device is a console
While checking for console_suspend_enabled also check if the
device is a console.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:23:20 +01:00
Shubhrajyoti Datta
86df8dd147 serial: uartps: Add the device_init_wakeup
Initialise the device wakeup.

The device_init_wakeup is needed for the wakeup to work by default.
Uart can be configured as the primary wakeup source so it is good to
enable wakeup by default.

The same functionality is enabled also by 8250_omap, atmel_serial,
omap-serial and stm32-usart.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:23:20 +01:00
Jia-Ju Bai
c85400f886 usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable()
The function r8a66597_endpoint_disable() and r8a66597_urb_enqueue() may
be concurrently executed.
The two functions both access a possible shared variable "hep->hcpriv".

This shared variable is freed by r8a66597_endpoint_disable() via the
call path:
r8a66597_endpoint_disable
  kfree(hep->hcpriv) (line 1995 in Linux-4.19)

This variable is read by r8a66597_urb_enqueue() via the call path:
r8a66597_urb_enqueue
  spin_lock_irqsave(&r8a66597->lock)
  init_pipe_info
    enable_r8a66597_pipe
      pipe = hep->hcpriv (line 802 in Linux-4.19)

The read operation is protected by a spinlock, but the free operation
is not protected by this spinlock, thus a concurrency use-after-free bug
may occur.

To fix this bug, the spin-lock and spin-unlock function calls in
r8a66597_endpoint_disable() are moved to protect the free operation.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:13:26 +01:00
Kyle Tso
c710d0bb76 usb: typec: tcpm: Extend the matching rules on PPS APDO selection
Current matching rules ensure that the voltage range of selected Source
Capability is entirely within the range defined in one of the Sink
Capabilities. This is reasonable but not practical because Sink may not
support wide range of voltage when sinking power while Source could
advertise its capabilities in relatively wider range. For example, a
Source PDO advertising 3.3V-11V@3A (9V Prog of Fixed Nominal Voltage)
will not be selected if the Sink requires 5V-12V@3A PPS power. However,
the Sink could work well if the requested voltage range in RDOs is
5V-11V@3A.

Currently accepted:
		|--------- source -----|
	|----------- sink ---------------|

Currently not accepted:
			|--------- source -----|
	|----------- sink ---------------|

	|--------- source -----|
		|----------- sink ---------------|

	|--------- source -----------------|
		|------ sink -------|

To improve the usability, change the matching rules to what listed
below:
a. The Source PDO is selectable if any portion of the voltage range
   overlaps one of the Sink PDO's voltage range.
b. The maximum operational voltage will be the lower one between the
   selected Source PDO and the matching Sink PDO.
c. The maximum power will be the maximum operational voltage times the
   maximum current defined in the selected Source PDO
d. Select the Source PDO with the highest maximum power

Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:13:26 +01:00
Heikki Krogerus
28ce553985 usb: typec: Improve Alt Mode documentation
Adding the document to the usb index file and fixing a few
references. Also, exposing the code examples as "literal
blocks" so they are more easy to read.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:13:25 +01:00
Raghuram Hegde
2da711bceb Bluetooth: btusb: Add support for Intel bluetooth device 8087:0029
Include the new USB product ID for Intel Bluetooth device 22260
family(CcPeak)

The /sys/kernel/debug/usb/devices portion for this device is:

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0029 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com>
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19 07:38:21 +01:00
David S. Miller
3061169a47 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2018-12-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) promote bpf_perf_event.h to mandatory UAPI header, from Masahiro.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 22:30:33 -08:00
Heiner Kallweit
33f18c96af net: ethernet: don't set phylib state CHANGELINK in drivers
After phy_start() phylib takes care of all needed actions, including
aneg settings and checking link state. There's no need to set state
PHY_CHANGELINK in drivers.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 22:07:20 -08:00
Leon Romanovsky
2acc7957db net/mlx5: Add shared Q counter bits
Updated HW specification file with needed bits to allow
sharing of Q counters between DEVX contexts and kernel.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-12-19 08:06:57 +02:00
Myungho Jung
78abe3d0df net/smc: fix TCP fallback socket release
clcsock can be released while kernel_accept() references it in TCP
listen worker. Also, clcsock needs to wake up before released if TCP
fallback is used and the clcsock is blocked by accept. Add a lock to
safely release clcsock and call kernel_sock_shutdown() to wake up
clcsock from accept in smc_release().

Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com
Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 22:02:51 -08:00
Colin Ian King
f7db2beb4c vxge: ensure data0 is initialized in when fetching firmware version information
Currently variable data0 is not being initialized so a garbage value is
being passed to vxge_hw_vpath_fw_api and this value is being written to
the rts_access_steer_data0 register.  There are other occurrances where
data0 is being initialized to zero (e.g. in function
vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0
is initialized likewise to 0.

Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable")

Fixes: 8424e00dfd ("vxge: serialize access to steering control register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 22:00:40 -08:00
Juergen Gross
d81c5054a5 xen/netfront: tolerate frags with no data
At least old Xen net backends seem to send frags with no real data
sometimes. In case such a fragment happens to occur with the frag limit
already reached the frontend will BUG currently even if this situation
is easily recoverable.

Modify the BUG_ON() condition accordingly.

Tested-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:59:20 -08:00
Alexandre Belloni
624b66f8c9 MAINTAINERS: Add a maintainer for Microsemi switches
Microsemi has been bought by Microchip and Microchip is supporting those
switches.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:51:34 -08:00
Zhenbo Gao
5679ee784c tipc: handle broadcast NAME_DISTRIBUTOR packet when receiving it
NAME_DISTRIBUTOR messages are transmitted through unicast link on TIPC
2.0, by contrast, the messages are delivered through broadcast link on
TIPC 1.7. But at present, NAME_DISTRIBUTOR messages received by
broadcast link cannot be handled in tipc_rcv() until an unicast message
arrives, which may lead to a significant delay to update name table.

To avoid this delay, we will also deal with broadcast NAME_DISTRIBUTOR
message on broadcast receive path.

Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:50:48 -08:00
Kunihiko Hayashi
8742beb50f net: phy: Fix the issue that netif always links up after resuming
Even though the link is down before entering hibernation,
there is an issue that the network interface always links up after resuming
from hibernation.

If the link is still down before enabling the network interface,
and after resuming from hibernation, the phydev->state is forcibly set
to PHY_UP in mdio_bus_phy_restore(), and the link becomes up.

In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend()
calls phy_stop_machine(), and mdio_bus_phy_resume() calls
phy_start_machine().
In resume sequence, it's enough to do the same as mdio_bus_phy_resume()
because the state has been preserved.

This patch fixes the issue by calling phy_start_machine() in
mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume().

Fixes: bc87922ff5 ("phy: Move PHY PM operations into phy_device")
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:48:15 -08:00
Jason Martinsen
15515aaaa6 lan78xx: Resolve issue with changing MAC address
Current state for the lan78xx driver does not allow for changing the
MAC address of the interface, without either removing the module (if
you compiled it that way) or rebooting the machine.  If you attempt to
change the MAC address, ifconfig will show the new address, however,
the system/interface will not respond to any traffic using that
configuration.  A few short-term options to work around this are to
unload the module and reload it with the new MAC address, change the
interface to "promisc", or reboot with the correct configuration to
change the MAC.

This patch enables the ability to change the MAC address via fairly normal means...
ifdown <interface>
modify entry in /etc/network/interfaces OR a similar method
ifup <interface>
Then test via any network communication, such as ICMP requests to gateway.

My only test platform for this patch has been a raspberry pi model 3b+.

Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com>

-----

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:40:59 -08:00
Heiner Kallweit
935b8a59ac net: phy: remove unused code in phy_probe
3c1bcc8614 ("net: ethernet: Convert phydev advertize and supported
from u32 to link mode") left some unused code in phy_probe(), remove it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:38:12 -08:00
Bryan Whitehead
0db7d253e9 lan743x: Expand phy search for LAN7431
The LAN7431 uses an external phy, and it can be found anywhere in
the phy address space. This patch uses phy address 1 for LAN7430
only. And searches all addresses otherwise.

Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:35:56 -08:00
David S. Miller
59fc137ebd Merge branch 'vxlan-Various-fixes'
Petr Machata says:

====================
vxlan: Various fixes

This patch set contains three fixes for the vxlan driver.

Patch #1 fixes handling of offload mark on replaced VXLAN FDB entries. A
way to trigger this is to replace the FDB entry with one that can not be
offloaded. A future patch set should make it possible to veto such FDB
changes. However the FDB might still fail to be offloaded due to another
issue, and the offload mark should reflect that.

Patch #2 fixes problems in __vxlan_dev_create() when a call to
rtnl_configure_link() fails. These failures would be tricky to hit on a
real system, the most likely vector is through an error in vxlan_open().
However, with the abovementioned vetoing patchset, vetoing the created
entry would trigger the same problems (and be easier to reproduce).

Patch #3 fixes a problem in vxlan_changelink(). In situations where the
default remote configured in the FDB table (if any) does not exactly
match the remote address configured at the VXLAN device, changing the
remote address breaks the default FDB entry. Patch #4 is then a self
test for this issue.

v3:
- Patch #2:
    - Reuse the same errout block for both cleanup paths. Use a bool to
      decide whether the unregister_netdevice() call should be made.

v2:
- Drop former patch #3
- Patch #2:
    - Delete the default entry before calling unregister_netdevice(). That
      takes care of former patch #3, hence tweak the commit message to
      mention that problem as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:18:26 -08:00
Petr Machata
55cbe07942 selftests: net: Add test_vxlan_fdb_changelink.sh
Add a test to exercise the fix from the previous patch.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:18:26 -08:00
Petr Machata
ce5e098f7a vxlan: changelink: Fix handling of default remotes
Default remotes are stored as FDB entries with an Ethernet address of
00:00:00:00:00:00. When a request is made to change a remote address of
a VXLAN device, vxlan_changelink() first deletes the existing default
remote, and then creates a new FDB entry.

This works well as long as the list of default remotes matches exactly
the configuration of a VXLAN remote address. Thus when the VXLAN device
has a remote of X, there should be exactly one default remote FDB entry
X. If the VXLAN device has no remote address, there should be no such
entry.

Besides using "ip link set", it is possible to manipulate the list of
default remotes by using the "bridge fdb". It is therefore easy to break
the above condition. Under such circumstances, the __vxlan_fdb_delete()
call doesn't delete the FDB entry itself, but just one remote. The
following vxlan_fdb_create() then creates a new FDB entry, leading to a
situation where two entries exist for the address 00:00:00:00:00:00,
each with a different subset of default remotes.

An even more obvious breakage rooted in the same cause can be observed
when a remote address is configured for a VXLAN device that did not have
one before. In that case vxlan_changelink() doesn't remove any remote,
and just creates a new FDB entry for the new address:

$ ip link add name vx up type vxlan id 2000 dstport 4789
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent
$ ip link set dev vx type vxlan remote 192.0.2.30
$ bridge fdb sh dev vx | grep 00:00:00:00:00:00
00:00:00:00:00:00 dst 192.0.2.30 self permanent <- new entry, 1 rdst
00:00:00:00:00:00 dst 192.0.2.20 self permanent <- orig. entry, 2 rdsts
00:00:00:00:00:00 dst 192.0.2.30 self permanent

To fix this, instead of calling vxlan_fdb_create() directly, defer to
vxlan_fdb_update(). That has logic to handle the duplicates properly.
Additionally, it also handles notifications, so drop that call from
changelink as well.

Fixes: 0241b83673 ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:18:26 -08:00
Petr Machata
6db9246871 vxlan: Fix error path in __vxlan_dev_create()
When a failure occurs in rtnl_configure_link(), the current code
calls unregister_netdevice() to roll back the earlier call to
register_netdevice(), and jumps to errout, which calls
vxlan_fdb_destroy().

However unregister_netdevice() calls transitively ndo_uninit, which is
vxlan_uninit(), and that already takes care of deleting the default FDB
entry by calling vxlan_fdb_delete_default(). Since the entry added
earlier in __vxlan_dev_create() is exactly the default entry, the
cleanup code in the errout block always leads to double free and thus a
panic.

Besides, since vxlan_fdb_delete_default() always destroys the FDB entry
with notification enabled, the deletion of the default entry is notified
even before the addition was notified.

Instead, move the unregister_netdevice() call after the manual destroy,
which solves both problems.

Fixes: 0241b83673 ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:18:25 -08:00
Petr Machata
6ad0b5a4e0 vxlan: Unmark offloaded bit on replaced FDB entries
When rdst of an offloaded FDB entry is replaced, it certainly isn't
offloaded anymore. Drivers are notified about such replacements, and can
re-mark the entry as offloaded again if they so wish. However until a
driver does so explicitly, assume a replaced FDB entry is not offloaded.

Note that replaces coming via vxlan_fdb_external_learn_add() are always
immediately followed by an explicit offload marking.

Fixes: 0efe117333 ("vxlan: Support marking RDSTs as offloaded")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:18:25 -08:00
Christoph Hellwig
38417468d4 scsi: block: remove the cluster flag
Now that the the SCSI layer replaced the use of the cluster flag with
segment size limits and the DMA boundary we can remove the cluster flag
from the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:39:26 -05:00
Xiang Chen
d6a9000b81 scsi: hisi_sas: Add support for DIF feature for v2 hw
For v3 hw, we support DIF operation for SAS, but not SATA.

In addition, DIF CRC16 is supported.

This patchset adds the SW support for the described features. The main
components are as follows:

- Get protection mask from module param
- Fill PI fields
- Fill related to DIF in DQ and protection iu memories

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:35:02 -05:00
Ewan D. Milne
4e87eb2f46 scsi: lpfc: do not set queue->page_count to 0 if pc_sli4_params.wqpcnt is invalid
Certain older adapters such as the OneConnect OCe10100 may not have a valid
wqpcnt value.  In this case, do not set queue->page_count to 0 in
lpfc_sli4_queue_alloc() as this will prevent the driver from initializing.

Fixes: 895427bd01 ("scsi: lpfc: NVME Initiator: Base modifications")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by:   Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:25:35 -05:00
Christoph Hellwig
4af14d113b scsi: remove the use_clustering flag
The same effects can be achieved by setting the dma_boundary to
PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those
settings into the drivers.  Note that in many cases the setting might
be bogus, but this keeps the status quo.

[mkp: fix myrs and myrb]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:19:21 -05:00
Christoph Hellwig
1c3726ad30 scsi: mac53c94: remove DISABLE_CLUSTERING
mac53c94 has no limitations on crossing pages for segments.  Just make
the 65535 byte segment size limit explicit, even if it matches the
current block layer limit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Christoph Hellwig
5bd6cd54bd scsi: mesh: remove DISABLE_CLUSTERING
mesh has no limitations on crossing pages for segments.  Just make
the 65535 byte segment size limit explicit, even if it matches the
current block layer limit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Christoph Hellwig
e08ea3009f scsi: xen-scsifront: remove DISABLE_CLUSTERING
There is no such limitation in the protocol or implementation, so
remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Christoph Hellwig
7b44047bce scsi: powertec: remove the explicit use_clustering setting
This driver already sets the dma_boundary to PAGE_SIZE - 1, which
has the same result.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Christoph Hellwig
736c23d6ca scsi: cumana_2: remove the explicit use_clustering setting
This driver already sets the dma_boundary to PAGE_SIZE - 1, which
has the same result.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Christoph Hellwig
50c2e9107f scsi: introduce a max_segment_size host_template parameters
This allows the host driver to indicate the maximum supported
segment size in a nice an easy way, so that the driver doesn't
have to worry about DMA-layer imposed limitations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Christoph Hellwig
2a3d4eb8e2 scsi: flip the default on use_clustering
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page.  Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Christoph Hellwig
4dd4130a72 scsi: make sure all drivers set the use_clustering flag
A few drivers were not setting the use_clustering flag at all and thus
default to disable.  Fix them up to explicitly set this field in
preparation for additional cleanups.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:08:07 -05:00
Wei Yongjun
8b2db98e81 scsi: target/core: Use kmem_cache_free() instead of kfree()
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().

Fixes: ad669505c4 ("scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 22:52:14 -05:00
Bart Van Assche
c29d7d10cd scsi: virtio_scsi: Remove per-target data because it is no longer used
Commit b5b6e8c8d3 ("scsi: virtio_scsi: fix IO hang caused by automatic
irq vector affinity") removed all virtio_scsi hostdata users. Since the
SCSI host data is no longer used, also remove the host data itself.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 22:47:44 -05:00
Shamir Rabinovitch
e00b64f7c5 RDMA: Cleanup undesired pd->uobject usage
Drivers should be using udata to determine if a method is invoked from
user space or kernel space. A pd does not necessarily say a different
objects is kernel or user.

Transforming the tests to use udata eliminates a large number of uobject
references from the drivers.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18 19:15:48 -07:00
David S. Miller
6c86bc2342 mlx5-uplink-rep-2018-12-15
Or Gerlitz says:
 
 This series is essentially a cleanup to align with the rest of the NIC
 switchdev drivers and make us
 more robust and clear/n: currently the PF netdev serves as the mlx5
 e-switch uplink netdev
 representor when going into switchdev mode and back as plain NIC
 netdev when going out.
 This causes some irregularities and misc troubles.
 
 Move to use dedicated uplink rep, as we have for the VF vports.
 
 The uplink rep netdev does has sysfs link and supports the sriov vf
 mac ndo, these two are in
 use by libvirt and other orchestrators, It also has richer ethtool
 support to allow controlling the
 port link & mtu along with supporting dcb and plugging into the mlx5
 lag logic.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcF/MBAAoJEEg/ir3gV/o+apkIAKVeB/ha8qiY+9ntA9B8HVxO
 cYb+fv4+DuYjTg/nN5QdYSAisN4SwFDA5ukz/ckr6XwV65EgTjAtlon/fHg/rDyz
 YT3dJRP9yjNXKxRvxa0K4PmTasmXGXzaJzsXYemHsfCDdnkNknZsqA+yoNe+2c40
 HoNsdy/Pvr18PjzYtpX0BiuSjH623daBmdFH0o+rwuwsApkAUlBJfosTg/7xyU7v
 TAjy8S1HCloJ7OAjOlzXVmYr65sAlQoFr860vLDQ7Og7JemxjSXQ+AdNb6mSAvZ5
 LBEvCA3G5tb4OkFX+1i/alxOcuG8/FoO+O3ZQWve1DNxoS76po851bgHXIdZCPg=
 =pqTq
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-uplink-rep-2018-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed:

====================
mlx5-uplink-rep-2018-12-15

Or Gerlitz says:

This series is essentially a cleanup to align with the rest of the NIC
switchdev drivers and make us
more robust and clear/n: currently the PF netdev serves as the mlx5
e-switch uplink netdev
representor when going into switchdev mode and back as plain NIC
netdev when going out.
This causes some irregularities and misc troubles.

Move to use dedicated uplink rep, as we have for the VF vports.

The uplink rep netdev does has sysfs link and supports the sriov vf
mac ndo, these two are in
use by libvirt and other orchestrators, It also has richer ethtool
support to allow controlling the
port link & mtu along with supporting dcb and plugging into the mlx5
lag logic.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 16:44:45 -08:00
David S. Miller
a9d6d897f3 Merge branch 'macb-DMA-race-fixes'
Anssi Hannula says:

====================
net: macb: DMA race condition fixes

Here are a couple of race condition fixes for the macb driver. The first
two are for issues observed at runtime on real HW.

v2:
- added received Tested-bys and Acked-bys to the first two patches
- in patch 3/3, moved the timestamp protection barrier closer to the
  timestamp reads
- in patch 3/3, removed unnecessary move of the addr assignment in
  gem_rx() to keep the patch minimal for maximum clarity
- in patch 3/3, clarified commit message and comments

The 3/3 is the same one I improperly sent last week as a standalone
patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 16:17:49 -08:00