Commit graph

982,081 commits

Author SHA1 Message Date
Will Deacon
d34664f63b Merge branch 'for-next/kexec' into aarch64/for-next/core
Merge in kexec_file_load() support from Akashi Takahiro.
2018-12-10 18:57:17 +00:00
Will Deacon
bc84a2d106 Merge branch 'kvm/cortex-a76-erratum-1165522' into aarch64/for-next/core
Pull in KVM workaround for A76 erratum #116522.

Conflicts:
	arch/arm64/include/asm/cpucaps.h
2018-12-10 18:53:52 +00:00
Suzuki K Poulose
f357b3a7e1 arm64: smp: Handle errors reported by the firmware
The __cpu_up() routine ignores the errors reported by the firmware
for a CPU bringup operation and looks for the error status set by the
booting CPU. If the CPU never entered the kernel, we could end up
in assuming stale error status, which otherwise would have been
set/cleared appropriately by the booting CPU.

Reported-by: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:18 +00:00
Will Deacon
66f16a2451 arm64: smp: Rework early feature mismatched detection
Rather than add additional variables to detect specific early feature
mismatches with secondary CPUs, we can instead dedicate the upper bits
of the CPU boot status word to flag specific mismatches.

This allows us to communicate both granule and VA-size mismatches back
to the primary CPU without the need for additional book-keeping.

Tested-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:18 +00:00
Will Deacon
68d23da437 arm64: Kconfig: Re-jig CONFIG options for 52-bit VA
Enabling 52-bit VAs for userspace is pretty confusing, since it requires
you to select "48-bit" virtual addressing in the Kconfig.

Rework the logic so that 52-bit user virtual addressing is advertised in
the "Virtual address space size" choice, along with some help text to
describe its interaction with Pointer Authentication. The EXPERT-only
option to force all user mappings to the 52-bit range is then made
available immediately below the VA size selection.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:18 +00:00
Steve Capper
b9567720a1 arm64: mm: Allow forcing all userspace addresses to 52-bit
On arm64 52-bit VAs are provided to userspace when a hint is supplied to
mmap. This helps maintain compatibility with software that expects at
most 48-bit VAs to be returned.

In order to help identify software that has 48-bit VA assumptions, this
patch allows one to compile a kernel where 52-bit VAs are returned by
default on HW that supports it.

This feature is intended to be for development systems only.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:18 +00:00
Steve Capper
67e7fdfcc6 arm64: mm: introduce 52-bit userspace support
On arm64 there is optional support for a 52-bit virtual address space.
To exploit this one has to be running with a 64KB page size and be
running on hardware that supports this.

For an arm64 kernel supporting a 48 bit VA with a 64KB page size,
some changes are needed to support a 52-bit userspace:
 * TCR_EL1.T0SZ needs to be 12 instead of 16,
 * TASK_SIZE needs to reflect the new size.

This patch implements the above when the support for 52-bit VAs is
detected at early boot time.

On arm64 userspace addresses translation is controlled by TTBR0_EL1. As
well as userspace, TTBR0_EL1 controls:
 * The identity mapping,
 * EFI runtime code.

It is possible to run a kernel with an identity mapping that has a
larger VA size than userspace (and for this case __cpu_set_tcr_t0sz()
would set TCR_EL1.T0SZ as appropriate). However, when the conditions for
52-bit userspace are met; it is possible to keep TCR_EL1.T0SZ fixed at
12. Thus in this patch, the TCR_EL1.T0SZ size changing logic is
disabled.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:17 +00:00
Steve Capper
a96a33b1ca arm64: mm: Prevent mismatched 52-bit VA support
For cases where there is a mismatch in ARMv8.2-LVA support between CPUs
we have to be careful in allowing secondary CPUs to boot if 52-bit
virtual addresses have already been enabled on the boot CPU.

This patch adds code to the secondary startup path. If the boot CPU has
enabled 52-bit VAs then ID_AA64MMFR2_EL1 is checked to see if the
secondary can also enable 52-bit support. If not, the secondary is
prevented from booting and an error message is displayed indicating why.

Technically this patch could be implemented using the cpufeature code
when considering 52-bit userspace support. However, we employ low level
checks here as the cpufeature code won't be able to run if we have
mismatched 52-bit kernel va support.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:17 +00:00
Steve Capper
e842dfb5a2 arm64: mm: Offset TTBR1 to allow 52-bit PTRS_PER_PGD
Enabling 52-bit VAs on arm64 requires that the PGD table expands from 64
entries (for the 48-bit case) to 1024 entries. This quantity,
PTRS_PER_PGD is used as follows to compute which PGD entry corresponds
to a given virtual address, addr:

pgd_index(addr) -> (addr >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)

Userspace addresses are prefixed by 0's, so for a 48-bit userspace
address, uva, the following is true:
(uva >> PGDIR_SHIFT) & (1024 - 1) == (uva >> PGDIR_SHIFT) & (64 - 1)

In other words, a 48-bit userspace address will have the same pgd_index
when using PTRS_PER_PGD = 64 and 1024.

Kernel addresses are prefixed by 1's so, given a 48-bit kernel address,
kva, we have the following inequality:
(kva >> PGDIR_SHIFT) & (1024 - 1) != (kva >> PGDIR_SHIFT) & (64 - 1)

In other words a 48-bit kernel virtual address will have a different
pgd_index when using PTRS_PER_PGD = 64 and 1024.

If, however, we note that:
kva = 0xFFFF << 48 + lower (where lower[63:48] == 0b)
and, PGDIR_SHIFT = 42 (as we are dealing with 64KB PAGE_SIZE)

We can consider:
(kva >> PGDIR_SHIFT) & (1024 - 1) - (kva >> PGDIR_SHIFT) & (64 - 1)
 = (0xFFFF << 6) & 0x3FF - (0xFFFF << 6) & 0x3F	// "lower" cancels out
 = 0x3C0

In other words, one can switch PTRS_PER_PGD to the 52-bit value globally
provided that they increment ttbr1_el1 by 0x3C0 * 8 = 0x1E00 bytes when
running with 48-bit kernel VAs (TCR_EL1.T1SZ = 16).

For kernel configuration where 52-bit userspace VAs are possible, this
patch offsets ttbr1_el1 and sets PTRS_PER_PGD corresponding to the
52-bit value.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
[will: added comment to TTBR1_BADDR_4852_OFFSET calculation]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:17 +00:00
Steve Capper
e5d9915745 arm64: mm: Define arch_get_mmap_end, arch_get_mmap_base
Now that we have DEFAULT_MAP_WINDOW defined, we can arch_get_mmap_end
and arch_get_mmap_base helpers to allow for high addresses in mmap.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:17 +00:00
Steve Capper
363524d2b1 arm64: mm: Introduce DEFAULT_MAP_WINDOW
We wish to introduce a 52-bit virtual address space for userspace but
maintain compatibility with software that assumes the maximum VA space
size is 48 bit.

In order to achieve this, on 52-bit VA systems, we make mmap behave as
if it were running on a 48-bit VA system (unless userspace explicitly
requests a VA where addr[51:48] != 0).

On a system running a 52-bit userspace we need TASK_SIZE to represent
the 52-bit limit as it is used in various places to distinguish between
kernelspace and userspace addresses.

Thus we need a new limit for mmap, stack, ELF loader and EFI (which uses
TTBR0) to represent the non-extended VA space.

This patch introduces DEFAULT_MAP_WINDOW and DEFAULT_MAP_WINDOW_64 and
switches the appropriate logic to use that instead of TASK_SIZE.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:17 +00:00
Steve Capper
f6795053da mm: mmap: Allow for "high" userspace addresses
This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).

Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of arch_get_unmapped_* functions. However,
on arm64 we use the generic versions of these functions.

Rather than duplicate the generic arch_get_unmapped_* implementations
for arm64, this patch instead introduces two architectural helper macros
and applies them to arch_get_unmapped_*:
 arch_get_mmap_end(addr) - get mmap upper limit depending on addr hint
 arch_get_mmap_base(addr, base) - get mmap_base depending on addr hint

If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 18:42:17 +00:00
Sergei Shtylyov
9f83cfdb1a sata_rcar: fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...

Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 11:10:31 -07:00
Dmitry V. Levin
b708a3cc96 selftests: do not macro-expand failed assertion expressions
I've stumbled over the current macro-expand behaviour of the test
harness:

$ gcc -Wall -xc - <<'__EOF__'
TEST(macro) {
	int status = 0;
	ASSERT_TRUE(WIFSIGNALED(status));
}
TEST_HARNESS_MAIN
__EOF__
$ ./a.out
[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

With this change the output of the same test looks much more
comprehensible:

[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

The issue is very similar to the bug fixed in glibc assert(3)
three years ago:
https://sourceware.org/bugzilla/show_bug.cgi?id=18604

Cc: Shuah Khan <shuah@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-12-10 10:55:52 -07:00
Colin Ian King
33e7a84225 clk: imx: remove redundant initialization of ret to zero
The initialization of ret is redundant as it is being re-assigned to
the return value from the call to imx8m_clk_composite_compute_dividers.
Clean this up by removing the initialization.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10 09:53:13 -08:00
Qian Cai
6e8830674e arm64: kasan: Increase stack size for KASAN_EXTRA
If the kernel is configured with KASAN_EXTRA, the stack size is
increased significantly due to setting the GCC -fstack-reuse option to
"none" [1]. As a result, it can trigger a stack overrun quite often with
32k stack size compiled using GCC 8. For example, this reproducer

  https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c

can trigger a "corrupted stack end detected inside scheduler" very
reliably with CONFIG_SCHED_STACK_END_CHECK enabled. There are other
reports at:

  https://lore.kernel.org/lkml/1542144497.12945.29.camel@gmx.us/
  https://lore.kernel.org/lkml/721E7B42-2D55-4866-9C1A-3E8D64F33F9C@gmx.us/

There are just too many functions that could have a large stack with
KASAN_EXTRA due to large local variables that have been called over and
over again without being able to reuse the stacks. Some noticiable ones
are,

size
7536 shrink_inactive_list
7440 shrink_page_list
6560 fscache_stats_show
3920 jbd2_journal_commit_transaction
3216 try_to_unmap_one
3072 migrate_page_move_mapping
3584 migrate_misplaced_transhuge_page
3920 ip_vs_lblcr_schedule
4304 lpfc_nvme_info_show
3888 lpfc_debugfs_nvmestat_data.constprop

There are other 49 functions over 2k in size while compiling kernel with
"-Wframe-larger-than=" on this machine. Hence, it is too much work to
change Makefiles for each object to compile without
-fsanitize-address-use-after-scope individually.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 17:53:12 +00:00
Linus Torvalds
9bb40f0108 - Bug fixes
- Fix brightness levels when !DT
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlwOiMQACgkQUa+KL4f8
 d2H+DBAAlzcOMz5pGA5UDaRHmY0WJ2jr7WC+2sfQZJAKmM+jN43de9yeTeUhrd73
 BUWvu8IoI7PnXiU0tWRC76L8gLVpoY6ptqJnbgdjmRtuWl0fhToG2u7pzU0L+tkl
 /EMI3M6lBKfrk6+nIim+/KrrTajyYFVIdM+CJXPkgIXe/suTKFD9DFJoHSCPnK/q
 VKasyk9sRdjfYdSsZSO7EO10FtllHgwP0wVJZgIZxVz+DL5rEvoGcWDKT1/zcTLT
 u18rtdgRVNanfbh0OQDTPI48FxfQIJfQeKuqk8b4FYMMGdQgG6ssnwD4CCGahl3V
 fCGK1vYOGZgT3DbgIHBvB68Y8F73IlhxlDIqlRjTjF8nQ3VvTxHfBHTBg6STK4M7
 eWNLh1sI/pkrmrUbqHffnsdTr4bZEDRR9SyfzCGOqtAlWe0a5nmS8bhtnRJ7Q3d1
 GJpCxakC6qkas59Qb5i7mpGclvKH0yDAk9OCgnvnNiCfK+Hh5WrYXJTSk7BIwsGL
 /ORvZ1G60wRdQYCEMSq+AXo7dROiMWhQ2CZ6cICgtRHWJFPB38Mr7RvHyvfIyY43
 1SKk/OYsBAIvhiiGvPJ5rxnx50QCzA3/gkATpPCtbUiOspdSG/Q69vUK1tVbXYV5
 aBYPkUPSlYKgvOGMjydKohetzB+X24MWvlIDBZCeRajWzPxQKK0=
 =UZ0a
 -----END PGP SIGNATURE-----

Merge tag 'backlight-fixes-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight fix from Lee Jones:
 "Fix brightness levels when !DT in pwm_bl driver"

* tag 'backlight-fixes-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Fix brightness levels for non-DT case.
2018-12-10 09:47:42 -08:00
Jiong Wang
e434b8cdf7 bpf: relax verifier restriction on BPF_MOV | BPF_ALU
Currently, the destination register is marked as unknown for 32-bit
sub-register move (BPF_MOV | BPF_ALU) whenever the source register type is
SCALAR_VALUE.

This is too conservative that some valid cases will be rejected.
Especially, this may turn a constant scalar value into unknown value that
could break some assumptions of verifier.

For example, test_l4lb_noinline.c has the following C code:

    struct real_definition *dst

1:  if (!get_packet_dst(&dst, &pckt, vip_info, is_ipv6))
2:    return TC_ACT_SHOT;
3:
4:  if (dst->flags & F_IPV6) {

get_packet_dst is responsible for initializing "dst" into valid pointer and
return true (1), otherwise return false (0). The compiled instruction
sequence using alu32 will be:

  412: (54) (u32) r7 &= (u32) 1
  413: (bc) (u32) r0 = (u32) r7
  414: (95) exit

insn 413, a BPF_MOV | BPF_ALU, however will turn r0 into unknown value even
r7 contains SCALAR_VALUE 1.

This causes trouble when verifier is walking the code path that hasn't
initialized "dst" inside get_packet_dst, for which case 0 is returned and
we would then expect verifier concluding line 1 in the above C code pass
the "if" check, therefore would skip fall through path starting at line 4.
Now, because r0 returned from callee has became unknown value, so verifier
won't skip analyzing path starting at line 4 and "dst->flags" requires
dereferencing the pointer "dst" which actually hasn't be initialized for
this path.

This patch relaxed the code marking sub-register move destination. For a
SCALAR_VALUE, it is safe to just copy the value from source then truncate
it into 32-bit.

A unit test also included to demonstrate this issue. This test will fail
before this patch.

This relaxation could let verifier skipping more paths for conditional
comparison against immediate. It also let verifier recording a more
accurate/strict value for one register at one state, if this state end up
with going through exit without rejection and it is used for state
comparison later, then it is possible an inaccurate/permissive value is
better. So the real impact on verifier processed insn number is complex.
But in all, without this fix, valid program could be rejected.

>From real benchmarking on kernel selftests and Cilium bpf tests, there is
no impact on processed instruction number when tests ares compiled with
default compilation options. There is slightly improvements when they are
compiled with -mattr=+alu32 after this patch.

Also, test_xdp_noinline/-mattr=+alu32 now passed verification. It is
rejected before this fix.

Insn processed before/after this patch:

                        default     -mattr=+alu32

Kernel selftest

===
test_xdp.o              371/371      369/369
test_l4lb.o             6345/6345    5623/5623
test_xdp_noinline.o     2971/2971    rejected/2727
test_tcp_estates.o      429/429      430/430

Cilium bpf
===
bpf_lb-DLB_L3.o:        2085/2085     1685/1687
bpf_lb-DLB_L4.o:        2287/2287     1986/1982
bpf_lb-DUNKNOWN.o:      690/690       622/622
bpf_lxc.o:              95033/95033   N/A
bpf_netdev.o:           7245/7245     N/A
bpf_overlay.o:          2898/2898     3085/2947

NOTE:
  - bpf_lxc.o and bpf_netdev.o compiled by -mattr=+alu32 are rejected by
    verifier due to another issue inside verifier on supporting alu32
    binary.
  - Each cilium bpf program could generate several processed insn number,
    above number is sum of them.

v1->v2:
 - Restrict the change on SCALAR_VALUE.
 - Update benchmark numbers on Cilium bpf tests.

Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-10 09:23:33 -08:00
Steven Rostedt (VMware)
45fe439bc3 fgraph: Add comment to describe ftrace_graph_get_ret_stack
The ret_stack should not be accessed directly via the curr_ret_stack
variable on the task_struct. This is because the ret_stack is going to be
converted into a series of longs and not an array of ret_stack structures.
The way that a ret_stack should be retrieved is via the
ftrace_graph_get_ret_stack structure, but it needs to be documented on how
to use it.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10 12:22:45 -05:00
Steven Rostedt (VMware)
e4c07bf986 arm64: ftrace: Set FTRACE_MAY_SLEEP before ftrace_modify_all_code()
It has been reported that ftrace_replace_code() which is called by
ftrace_modify_all_code() can cause a soft lockup warning for an
allmodconfig kernel. This is because all the debug options enabled
causes the loop in ftrace_replace_code() (which loops over all the
functions being enabled where there can be 10s of thousands), is too
slow, and never schedules out.

To solve this, setting FTRACE_MAY_SLEEP to the command passed into
ftrace_replace_code() will make it call cond_resched() in the loop,
which prevents the soft lockup warning from triggering.

Link: http://lkml.kernel.org/r/20181204192903.8193-1-anders.roxell@linaro.org
Link: http://lkml.kernel.org/r/20181205183304.000714627@goodmis.org

Acked-by: Will Deacon <will.deacon@arm.com>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10 12:22:45 -05:00
Steven Rostedt (VMware)
a0572f687f ftrace: Allow ftrace_replace_code() to be schedulable
The function ftrace_replace_code() is the ftrace engine that does the
work to modify all the nops into the calls to the function callback in
all the functions being traced.

The generic version which is normally called from stop machine, but an
architecture can implement a non stop machine version and still use the
generic ftrace_replace_code(). When an architecture does this,
ftrace_replace_code() may be called from a schedulable context, where
it can allow the code to be preemptible, and schedule out.

In order to allow an architecture to make ftrace_replace_code()
schedulable, a new command flag is added called:

 FTRACE_MAY_SLEEP

Which can be or'd to the command that is passed to
ftrace_modify_all_code() that calls ftrace_replace_code() and will have
it call cond_resched() in the loop that modifies the nops into the
calls to the ftrace trampolines.

Link: http://lkml.kernel.org/r/20181204192903.8193-1-anders.roxell@linaro.org
Link: http://lkml.kernel.org/r/20181205183303.828422192@goodmis.org

Reported-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10 12:22:45 -05:00
Masami Hiramatsu
dbc3f042fb selftests/ftrace: Add testcases for dynamic event
Add common testcases for dynamic_events interface.
 - Add/remove kprobe events via dynamic_events
 - Add/remove synthetic events via dynamic_events
 - Selective clear events (clear events other interfaces)
 - Genelic clear events ("!LINE" syntax)

Link: http://lkml.kernel.org/r/154140872590.17322.10394440849261743052.stgit@devbox

Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10 12:22:44 -05:00
Masami Hiramatsu
1ce25e9f6f tracing: Add generic event-name based remove event method
Add a generic method to remove event from dynamic event
list. This is same as other system under ftrace. You
just need to pass the event name with '!', e.g.

  # echo p:new_grp/new_event _do_fork > dynamic_events

This creates an event, and

  # echo '!p:new_grp/new_event _do_fork' > dynamic_events

Or,

  # echo '!p:new_grp/new_event' > dynamic_events

will remove new_grp/new_event event.

Note that this doesn't check the event prefix (e.g. "p:")
strictly, because the "group/event" name must be unique.

Link: http://lkml.kernel.org/r/154140869774.17322.8887303560398645347.stgit@devbox

Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10 12:22:44 -05:00
Steven Rostedt (VMware)
7e1413edd6 tracing: Consolidate trace_add/remove_event_call back to the nolock functions
The trace_add/remove_event_call_nolock() functions were added to allow
the tace_add/remove_event_call() code be called when the event_mutex
lock was already taken. Now that all callers are done within the
event_mutex, there's no reason to have two different interfaces.

Remove the current wrapper trace_add/remove_event_call()s and rename the
_nolock versions back to the original names.

Link: http://lkml.kernel.org/r/154140866955.17322.2081425494660638846.stgit@devbox

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10 12:22:10 -05:00
Linus Torvalds
1dffab5e98 ARM: SoC fixes
The usual batch; most of them are DT tweaks to fix misdescribed
 hardware. Beyond that:
 
  - A bugfix for MMP2 CPU detection, it's been there quite a while but
    makes sense to fix now anyway.
  - Some power management tweaks;
    + disabling of CPU idle power state on Marvell Armada 7K/8K (Macchiatobin et al)
    + Increase of minimum voltage on BananaPi M3
    + Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX
  - A couple of MAINTAINER updates; MMP has a new volunteer to look after
    it, and Mediatek adds a few keywords, IRC channel and wiki URL.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwNtPAPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3o7oQAKbaWFicYzMaH1MK7wmNf2k0VKqwA0EQcQKA
 DSfT+16bcnetP84e559k5YwpjUKAW7c/LfG5zQ/Zz1ZXdDRPKNDpT+C0mqg0DPeM
 IcraDbRooqeT9VNNCFRr22nB5kp57OjmFDnDjYVoZbjTjyI2uAgaZGA4AMCauOS5
 LzUXqxkMSe+LVqHeTnnHZDol4ICOlIg5eBkhmmRd3fCPq2NLI/l0HfCbLHBQsJYe
 dlMxkhNzfxepiojY1uGzQledUg0/1JOkJF2tXMWb176JhcZ7Hoxx002/GAm1m0G2
 Rkb5/cs3tfl8Jr29LR6h9BCnZZ+q3D4C2e/sWtWYRNB0z0zBqrOIopmtgh5iyERI
 T+CeJwf9fso6HTXQnWelYT5+2eQBQfakDx9PbQpYaNoA1g3LwZUxOc6d/t89vYKV
 7tWeXJ0/PI2Vo8AUoT6mu4GH62QAZSM7mAg7p8uPFar2IiVd1ktVD4PoXVYsEhvT
 h7hljPsYkBC/EcHG9tacTqCMfO0dJfH0AKfzs6PuY22S6+dPDg+ReoAvoF35P0HK
 5oHB6WqKEC15ZG72rVurkk1C6YEirBF9wTPmxxBQnwrdqBddjvgl0Lv21ryrcAjW
 O3dX24mB9Ayq+ecu797SNPMDPmgnrqJSG/O8JPxjZFIT+0sb2DVFVfW8jHgw1nj9
 vqfwi+m3
 =gJxg
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "The usual batch; most of them are DT tweaks to fix misdescribed
  hardware. Beyond that:

   - A bugfix for MMP2 CPU detection, it's been there quite a while but
     makes sense to fix now anyway.

   - Some power management tweaks:
      + disabling of CPU idle power state on Marvell Armada 7K/8K
        (Macchiatobin et al)
      + Increase of minimum voltage on BananaPi M3
      + Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX

   - A couple of MAINTAINER updates:
      + MMP has a new volunteer to look after it
      + Mediatek adds a few keywords, IRC channel and wiki URL"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  arm64: dts: mt7622: Drop the general purpose timer node
  arm64: dts: mt7622: fix no more console output on BPI-R64 board
  arm64: dts: mt7622: fix no more console output on rfb1
  ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V
2018-12-10 09:06:22 -08:00
Masahiro Yamada
5fd98eb7e8 ARM: dts: uniphier: add MIO DMAC nodes
Add MIO-DMAC (Media IO DMA Controller) nodes, and use them as
the DMA engine of SD/eMMC controllers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-11 01:31:17 +09:00
Viresh Kumar
072ae88ad2 arm64: dts: uniphier: Add all CPUs in cooling maps
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.

Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.

Update cooling maps to include all devices affected by individual trip
points.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-11 01:31:17 +09:00
Enric Balletbo i Serra
d347d0c82a backlight: pwm_bl: Fix brightness levels for non-DT case.
Commit '88ba95bedb ("backlight: pwm_bl: Compute brightness of LED
linearly to human eye")' allows the possibility to compute a default
brightness table when there isn't the brightness-levels property in the
DT. Unfortunately the changes made broke the pwm backlight for the
non-DT boards.

Usually, the non-DT boards don't pass the brightness levels via platform
data, instead, it sets the max_brightness in their platform data and the
driver calculates the level without a table. The offending patch assumed
that when there is no brightness levels table we should create one, but this
is clearly wrong for the non-DT case.

After this patch the code handles the DT and the non-DT case taking in
consideration also if max_brightness is set or not.

Fixes: 88ba95bedb ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-12-10 15:37:47 +00:00
Zhuohao Lee
7f63196eaa
ASoC: Intel: kbl_da7219_max98927: fix the audio jack button remapping
From the da7219 spec, the button A, B, C and D are remapped to
0, 1, 2 and 3 respectively where button A is KEY_PLAYPAUSE,
B is KEY_VOLUMEUP, C is KEY_VOLUMEDOWN and D is KEY_VOICECOMMAND.

Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Signed-off-by: Max Chang  <changmax@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-10 15:35:49 +00:00
Hans de Goede
02e5af6575
ASoC: Intel: bytcr_rt5640: Add quirk for the Point of View Mobii TAB-P1005W-232
Add a quirk for the Point of View Mobii TAB-P1005W-232 v2.0 tablet, this
BYTCR device uses IN1 for its MIC and JD2 for jack-detect, rather then the
default IN3 and JD1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-10 15:35:45 +00:00
Hans de Goede
271248f4c2
ASoC: Intel: bytcr_rt5640: Add quirk for the Prowise PT301 tablet
Add a quirk for the Prowise PT301 tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

Also it uses IN1 for its MIC and JD2 for jack-detect, rather then the
default IN3 and JD1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-10 15:32:52 +00:00
Mikulas Patocka
6f75723190 dm: remove the pending IO accounting
Remove the "pending" atomic counters, that duplicate block-core's
in_flight counters, and update md_in_flight() to look at percpu
in_flight counters.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:38 -07:00
Mikulas Patocka
e016b78201 block: return just one value from part_in_flight
The previous patches deleted all the code that needed the second value
returned from part_in_flight - now the kernel only uses the first value.

Consequently, part_in_flight (and blk_mq_in_flight) may be changed so that
it only returns one value.

This patch just refactors the code, there's no functional change.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:38 -07:00
Mikulas Patocka
1226b8dd0e block: switch to per-cpu in-flight counters
Now when part_round_stats is gone, we can switch to per-cpu in-flight
counters.

We use the local-atomic type local_t, so that if part_inc_in_flight or
part_dec_in_flight is reentrantly called from an interrupt, the value will
be correct.

The other counters could be corrupted due to reentrant interrupt, but the
corruption only results in slight counter skew - the in_flight counter
must be exact, so it needs local_t.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:37 -07:00
Mikulas Patocka
5b18b5a737 block: delete part_round_stats and switch to less precise counting
We want to convert to per-cpu in_flight counters.

The function part_round_stats needs the in_flight counter every jiffy, it
would be too costly to sum all the percpu variables every jiffy, so it
must be deleted. part_round_stats is used to calculate two counters -
time_in_queue and io_ticks.

time_in_queue can be calculated without part_round_stats, by adding the
duration of the I/O when the I/O ends (the value is almost as exact as the
previously calculated value, except that time for in-progress I/Os is not
counted).

io_ticks can be approximated by increasing the value when I/O is started
or ended and the jiffies value has changed. If the I/Os take less than a
jiffy, the value is as exact as the previously calculated value. If the
I/Os take more than a jiffy, io_ticks can drift behind the previously
calculated value.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:37 -07:00
Mike Snitzer
112f158f66 block: stop passing 'cpu' to all percpu stats methods
All of part_stat_* and related methods are used with preempt disabled,
so there is no need to pass cpu around to allow of them.  Just call
smp_processor_id() as needed.

Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:37 -07:00
Mike Snitzer
dbd3bbd291 dm rq: leverage blk_mq_queue_busy() to check for outstanding IO
Now that request-based dm-multipath only supports blk-mq, make use of
the newly introduced blk_mq_queue_busy() to check for outstanding IO --
rather than (ab)using the block core's in_flight counters.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:37 -07:00
Mikulas Patocka
80a787ba38 dm: dont rewrite dm_disk(md)->part0.in_flight
generic_start_io_acct and generic_end_io_acct already update the variable
in_flight using atomic operations, so we don't have to overwrite them
again.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:37 -07:00
Adrian Bunk
37cf28d3b5 eeprom: at24: add support for 24c2048
Works with ST M24M02.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-12-10 16:23:27 +01:00
Adrian Bunk
6c0c5dc33f dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string
Add new compatible to the device tree bindings.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-12-10 16:23:27 +01:00
Eugen Cazacu
c7fe060885 user/Makefile: Fix typo and capitalization in comment section
Signed-off-by: Eugen Cazacu <green182day@hotmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-11 00:18:03 +09:00
Will Deacon
33309ecda0 arm64: Fix minor issues with the dcache_by_line_op macro
The dcache_by_line_op macro suffers from a couple of small problems:

First, the GAS directives that are currently being used rely on
assembler behavior that is not documented, and probably not guaranteed
to produce the correct behavior going forward. As a result, we end up
with some undefined symbols in cache.o:

$ nm arch/arm64/mm/cache.o
         ...
         U civac
         ...
         U cvac
         U cvap
         U cvau

This is due to the fact that the comparisons used to select the
operation type in the dcache_by_line_op macro are comparing symbols
not strings, and even though it seems that GAS is doing the right
thing here (undefined symbols by the same name are equal to each
other), it seems unwise to rely on this.

Second, when patching in a DC CVAP instruction on CPUs that support it,
the fallback path consists of a DC CVAU instruction which may be
affected by CPU errata that require ARM64_WORKAROUND_CLEAN_CACHE.

Solve these issues by unrolling the various maintenance routines and
using the conditional directives that are documented as operating on
strings. To avoid the complexity of nested alternatives, we move the
DC CVAP patching to __clean_dcache_area_pop, falling back to a branch
to __clean_dcache_area_poc if DCPOP is not supported by the CPU.

Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 15:03:51 +00:00
Tony Lindgren
e9e685480b ARM: dts: Fix hsi gdd range for omap4
While reviewing the missing mcasp ranges I noticed omap4 hsi range
for gdd is wrong so let's fix it.

I'm not aware of any omap4 devices in mainline kernel though that use
hsi though.

Fixes: 84badc5ec5 ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-12-10 07:02:13 -08:00
Vivek Gautam
89cddc5637 iommu/arm-smmu: Add support for qcom,smmu-v2 variant
qcom,smmu-v2 is an arm,smmu-v2 implementation with specific
clock and power requirements.
On msm8996, multiple cores, viz. mdss, video, etc. use this
smmu. On sdm845, this smmu is used with gpu.
Add bindings for the same.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 14:56:00 +00:00
Vivek Gautam
f1518cd84b dt-bindings: arm-smmu: Add bindings for qcom,smmu-v2
Add bindings doc for Qcom's smmu-v2 implementation.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 14:56:00 +00:00
Sricharan R
655e364374 iommu/arm-smmu: Add the device_link between masters and smmu
Finally add the device link between the master device and
smmu, so that the smmu gets runtime enabled/disabled only when the
master needs it. This is done from add_device callback which gets
called once when the master is added to the smmu.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 14:55:59 +00:00
Sricharan R
d4a44f0750 iommu/arm-smmu: Invoke pm_runtime across the driver
Enable pm-runtime on devices that implement a pm domain. Then,
add pm runtime hooks to several iommu_ops to power cycle the
smmu device for explicit TLB invalidation requests, and
register space accesses, etc.
We need these hooks when the smmu, linked to its master through
device links, has to be powered-up without the master device
being in context.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
[vivek: Cleanup pm runtime calls]
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 14:55:59 +00:00
Sricharan R
96a299d24c iommu/arm-smmu: Add pm_runtime/sleep ops
The smmu needs to be functional only when the respective
master's using it are active. The device_link feature
helps to track such functional dependencies, so that the
iommu gets powered when the master device enables itself
using pm_runtime. So by adapting the smmu driver for
runtime pm, above said dependency can be addressed.

This patch adds the pm runtime/sleep callbacks to the
driver and the corresponding bulk clock handling for all
the clocks needed by smmu.

Also, while we enable the runtime pm, add a pm sleep suspend
callback that pushes devices to low power state by turning
the clocks off in a system sleep.
Add corresponding clock enable path in resume callback as well.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
[Thor: Rework to get clocks from device tree]
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
[vivek: rework for clock and pm ops]
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 14:55:59 +00:00
Will Deacon
a868e85304 iommu/arm-smmu-v3: Use explicit mb() when moving cons pointer
After removing an entry from a queue (e.g. reading an event in
arm_smmu_evtq_thread()) it is necessary to advance the MMIO consumer
pointer to free the queue slot back to the SMMU. A memory barrier is
required here so that all reads targetting the queue entry have
completed before the consumer pointer is updated.

The implementation of queue_inc_cons() relies on a writel() to complete
the previous reads, but this is incorrect because writel() is only
guaranteed to complete prior writes. This patch replaces the call to
writel() with an mb(); writel_relaxed() sequence, which gives us the
read->write ordering which we require.

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 14:55:58 +00:00
Zhen Lei
84a9a75774 iommu/arm-smmu-v3: Avoid memory corruption from Hisilicon MSI payloads
The GITS_TRANSLATER MMIO doorbell register in the ITS hardware is
architected to be 4 bytes in size, yet on hi1620 and earlier, Hisilicon
have allocated the adjacent 4 bytes to carry some IMPDEF sideband
information which results in an 8-byte MSI payload being delivered when
signalling an interrupt:

MSIAddr:
	 |----4bytes----|----4bytes----|
	 |    MSIData   |    IMPDEF    |

This poses no problem for the ITS hardware because the adjacent 4 bytes
are reserved in the memory map. However, when delivering MSIs to memory,
as we do in the SMMUv3 driver for signalling the completion of a SYNC
command, the extended payload will corrupt the 4 bytes adjacent to the
"sync_count" member in struct arm_smmu_device. Fortunately, the current
layout allocates these bytes to padding, but this is fragile and we
should make this explicit.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[will: Rewrote commit message and comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-10 14:55:58 +00:00