Commit graph

982,081 commits

Author SHA1 Message Date
Gilad Ben-Yossef
ecd6d5c9cb crypto: cts - document NIST standard status
cts(cbc(aes)) as used in the kernel has been added to NIST
standard as CBC-CS3. Document it as such.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Suggested-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16 14:09:39 +08:00
Vitaly Chikunov
2eb4942b66 crypto: ecc - check for invalid values in the key verification test
Currently used scalar multiplication algorithm (Matthieu Rivain, 2011)
have invalid values for scalar == 1, n-1, and for regularized version
n-2, which was previously not checked. Verify that they are not used as
private keys.

Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16 14:09:39 +08:00
Fabio Estevam
75c63de104 ARM: imx_v6_v7_defconfig: Select the PXP driver
The Pixel Pipeline (PXP) block is present on several i.MX SoCs
such as imx6dl, imx6sl, imx6ul, imx6sx, imx6ull and imx7d.

Select the PXP driver by default.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-16 13:30:38 +08:00
Lucas Stach
4951c2da1a ARM: dts: imx6: add thermal sensor and cooling cells
This allows a board to specify a custom thermal zone configuration
involving the SoC internal sensor, CPU and GPU nodes without having
to change those nodes.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-16 11:03:36 +08:00
Lucas Stach
749a5068f2 ARM: dts: imx6: RDU2: fix eGalax touchscreen node
Use the correct compatible for the new protocol used by the firmware
on the touch controller, the GPIO wakeup isn't used in that case.
Also eGalax touch needs axis swapping, just as with the RMI4 touch.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-16 11:01:45 +08:00
Alex Gonzalez
381aafc016 ARM: dts: imx6ul: ccimx6ulsom: Fix indentation on iomuxc nodes
This patch corrects indentation problems in the gpmigrp and i2c1grp nodes.

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-16 10:53:21 +08:00
Alex Gonzalez
9d60e0f031 ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant
The wireless variants of the ConnecCore 6UL SOM include a Qualcomm
QCA6564 wireless chip with dual WiFi and Bluetooth.

Both the ConnectCore 6UL SBC Express and Pro boards fit a wireless SOM.

The Wifi is connected through the SDIO interface on usdhc1 and the
Bluetooth is connected via uart1.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-16 10:52:07 +08:00
Xiaowei Bao
8ab9c127bf ARM: dts: ls1021a: Add the status property disable PCIe
Add the status property disable the PCIe, the property will be enable
by bootloader.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-16 10:50:42 +08:00
Jens Axboe
9334ae5e6f ide: clear ide_req()->special for non-passthrough requests
The initial patch cleared this for all requests, which is wrong
since internal uses can't have this cleared as that's what they
are using to pass data. The fix moved the initialization to the
mq_ops->initialize_rq_fn(), but that's only a partial fix since
it only catches uses from blk_get_request(), not requests coming
from the file system.

Keep the non-fs initialization, and add the IDE entry clear
IFF RQF_DONTPREP isn't set and it's a passthrough request.

Fixes: d16a67667c ("ide: don't clear special on ide_queue_rq() entry")
Fixes: 22ce0a7ccf ("ide: don't use req->special")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 19:47:35 -07:00
Ian Ray
7dd9c42f26 ARM: dts: imx6q-bx50v3: user-space watchdog GPIO configuration
Leave b{4,6}50v3 GPIO expander pca953x pins P05,P10,P11 unconfigured as
they are now used to implement an additional watchdog mechanism in user
space.  P10,P11 pins remain unused (and therefore hogged) on b850v3.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-16 10:46:04 +08:00
Lucas De Marchi
56d4eac0a1 drm/i195: spell out reverse on for_each macros
Do like it's done for list.h macros, and use "reverse" suffix rather
than "rev".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-3-lucas.demarchi@intel.com
2018-11-15 16:36:58 -08:00
Lucas De Marchi
c6e1f8cc88 drm/i915/icl: reverse uninit order
Bspec 21257 says "DDIA PHY is the comp master, so it must
not be un-initialized if other combo PHYs are in use". Here
we are shutting down all phys, so it's not strictly required.
However let's be consistent on deinitializing things in the
reversed order we initialized them.

v2: simplify protection for enum port being unsigned in future
v3: spell out reverse rather than rev

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-2-lucas.demarchi@intel.com
2018-11-15 16:36:58 -08:00
Lucas De Marchi
6233016484 drm/i915/icl: replace check for combo phy
These are the only places that assume ports A and B are the ones with
combo phy.  Let's use intel_port_is_combophy() there to make sure
it checks for combo phy ports the same way everywhere.

v2: define for_each_combo_port() helper to check the ports

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-1-lucas.demarchi@intel.com
2018-11-15 16:36:57 -08:00
Andrew Morton
a97b956533 drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo
Add missing semicolon.

Fixes: 291d57f67d ("qed: Fix rdma_info structure allocation")
Cc: Michal Kalderon <michal.kalderon@cavium.com>
Cc: Denis Bolotin <denis.bolotin@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 16:21:00 -08:00
Tony Lindgren
91b9deefed
spi: omap2-mcspi: Add missing suspend and resume calls
I've been wondering still about omap2-mcspi related suspend and resume
flakeyness and looks like we're missing calls to spi_master_suspend()
and spi_master_resume(). Adding those and using pm_runtime_force_suspend()
and pm_runtime_force_resume() makes things work for suspend and resume
and allows us to stop using noirq suspend and resume.

And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things
further.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-15 16:20:43 -08:00
David S. Miller
5aa25c05be This feature/cleanup patchset includes the following patches:
- Bump version strings, by Simon Wunderlich
 
  - Fixup includes, by Sven Eckelmann (3 patches)
 
  - Separate BATMAN_ADV_DEBUG from DEBUGFS, by Sven Eckelmann
 
  - Fixup tracing log documentation, by Sven Eckelmann
 
  - Use exclusive locks to secure netlink information dump transfers,
    by Sven Eckelmann (8 patches)
 
  - Move CRC16 dependency, by Sven Eckelmann
 
  - Enable MCAST by default, by Linus Luessing
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAlvsK8YWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoUr9EACZvVvgqVQC/kiAWyyXuTUvTy7q
 SYc0nwmHeG5L/+ekHMsfs8DZ/wofEo6LcZDrSRv79bLjCOLbvSMThVLRH2p1r2sG
 OLHqTEbofuqc79C0gXKcJwiuauomjKNty7NKbrf0g7SYhmgRFXJyDamjXt6+4kAS
 HVSPsyFt3hI7wo3VIzm4pxXsrjV3wtKAN4RdkwE0i0NCSvJpFuCPMOi53tabjokR
 aOb04vLK/SVg426PNS+0iD7oqP5WYKyZSDFD9HHCRj1AHTCxR+7E25nRYKS5J+t4
 gCn6Q9sfrJWO2k816xBl2PysA/kVT3GChs4y14LMCaLDyH0Ny4XFeR5pgjpc62fD
 JZe/rQwAQQ9IbN1dO9GTww88vMvELcSJhSP2W4q82qsHdn/h/ghVaLKl+zSUO4oS
 OByG6BJk0Dz3KpMcCcHRL+VXGUSVmRuOCP2LqM+c0aK9s56qhJM/aR/g7FePq4lQ
 HhOCCRP/bmx7F75OZRdxwOQbupQ7P1AA/P2dwjs1xzZ/BHEdmHipsmWs/z2/tKWn
 +A9dvLqiF6Dy7VgFUgp7PSi0QyDrgFHNvE14o4ako7QD2o9NqgPsdSlAK68JD0o9
 CR14Tb23mNRulWP0GZXjS/MbHmNT7tY+sAc4tSj2VO++ozd5Qox5Y1qPPnL1K8vL
 yLjA9NtJzrT36rCPpA==
 =9x4D
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-for-davem-20181114' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - Bump version strings, by Simon Wunderlich

 - Fixup includes, by Sven Eckelmann (3 patches)

 - Separate BATMAN_ADV_DEBUG from DEBUGFS, by Sven Eckelmann

 - Fixup tracing log documentation, by Sven Eckelmann

 - Use exclusive locks to secure netlink information dump transfers,
   by Sven Eckelmann (8 patches)

 - Move CRC16 dependency, by Sven Eckelmann

 - Enable MCAST by default, by Linus Luessing
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 16:12:19 -08:00
David S. Miller
35bf9f1fd2 Merge branch 'mlx4-fixes'
Tariq Toukan says:

====================
mlx4 fixes for 4.20-rc

This patchset includes small fixes for mlx4_core driver.

First patch by Jack zeros a field in a FW communication
command, to match the FW spec.
Please queue it to -stable >= v3.17.

In the second patch I zero-initialize a variable to silence
a compliation warning.
Please queue it to -stable >= v3.19.

Third patch by Aya replaces int fields with unsigned int,
to fix a UBSAN warning.
Please queue it to -stable >= v3.13.

Series generated against net commit:
db8ddde766 Merge branch 'qed-Miscellaneous-bug-fixes'
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 16:09:31 -08:00
Aya Levin
a463146e67 net/mlx4: Fix UBSAN warning of signed integer overflow
UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a6161 ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 16:09:31 -08:00
Tariq Toukan
3ea7e7ea53 net/mlx4_core: Fix uninitialized variable compilation warning
Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399ffa ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 16:09:31 -08:00
Jack Morgenstein
bd85fbc203 net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command
When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c83 ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 16:09:30 -08:00
Mark Brown
d57e79601b
spi: Fix core transfer waits after slave support
The refactoring done as part of adding the core support for handling
waiting for slave transfer dropped a conditional which meant that we
started waiting for completion of all transfers, not just those that the
controller asked for.  This caused hangs and massive delays on platforms
that don't need the core delay.  Re-add the delay to fix this.

Fixes: 810923f3bf (spi: Deal with slaves that return from transfer_one() unfinished)
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-15 16:08:32 -08:00
Paul Burton
1229ace4a4
MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculation
Both the Loongson3 & SGI-IP27 platforms set max_low_pfn to the last
available PFN describing memory. They both do it in paging_init() which
is later than ideal since max_low_pfn is used before that function is
called. Simplify both platforms to trivially initialize max_low_pfn
using the end address of DRAM, and do it earlier in prom_meminit().

Signed-off-by: Paul Burton <paul.burton@mips.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Patchwork: https://patchwork.linux-mips.org/patch/21104/
References: https://patchwork.linux-mips.org/patch/21031/
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: linux-mips@linux-mips.org
2018-11-15 15:42:15 -08:00
Li RongQing
45cf7959c3 net: slightly optimize eth_type_trans
netperf udp stream shows that eth_type_trans takes certain cpu,
so adjust the mac address check order, and firstly check if it
is device address, and only check if it is multicast address
only if not the device address.

After this change:
To unicast, and skb dst mac is device mac, this is most of time
reduce a comparision
To unicast, and skb dst mac is not device mac, nothing change
To multicast, increase a comparision

Before:
1.03%  [kernel]          [k] eth_type_trans

After:
0.78%  [kernel]          [k] eth_type_trans

Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 15:10:59 -08:00
Li RongQing
982c17b9e3 net: remove BUG_ON from __pskb_pull_tail
if list is NULL pointer, and the following access of list
will trigger panic, which is same as BUG_ON

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 15:07:50 -08:00
David S. Miller
7e18750cda Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-11-14

This series contains updates to i40e and virtchnl.

Lance Roy updates i40e to use lockdep_assert_held() instead of
spin_is_locked(), since it is better suited to check locking
requirements.

Jan improves the code readability in XDP by adding the use of a local
variable.  Provides protection on methods that create/modify/destroy
VF's via locking mechanism to prevent unstable behaviour and potential
kernel panics.

Krzysztof adds a hardware capability flag to indicate whether firmware
supports stopping the LLDP agent.

Patryk replaces the use of strncpy() with strlcpy() to ensure the buffer
is NULL terminated.

Mitch fixes the issue of trying to start nway on devices that do not
support auto-negotiation, by checking the autoneg state before
attempting to restart nway.

Alice updates virtchnl to keep the checks all together for ease of
readability and consistency.  Also fixed a "off by one" error in the
number of traffic classes being calculated.

Richard fixed VF port VLANs, where the priority bits were incorrectly
set because the incorrect shift and mask bits were being used.

Alan adds a bit to set and check if a timeout recovery is already
pending to prevent overlapping transmit timeout recovery.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 15:05:11 -08:00
Jens Axboe
db29eb059c nvme: fix handling of EINVAL on pci_alloc_irq_vectors_affinity()
At least on SPARC, if MSI/MSI-X isn't supported, we get EINVAL if
we ask for more than one vector. This isn't covered by our ENOSPC
check.

If we get EINVAL, decrease our ask to just one vector, instead of
bailing out in error.

Fixes: 3b6592f70a ("nvme: utilize two queue maps, one for reads and one for writes")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 16:05:02 -07:00
David S. Miller
110e2b4b94 test_objagg: Fix warning.
lib/test_objagg.c: In function ‘test_delta_action_item’:
./include/linux/printk.h:308:2: warning: ‘errmsg’ may be used uninitialized in this function [-Wmaybe-uninitialized]

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:57:09 -08:00
Dave Airlie
20325e8a61 Merge tag 'drm-intel-fixes-2018-11-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix Bugzilla #108712: Fix incorrect EU count report from kernel
- Fix to account for scale factor when calculating initial phase on scaled output
- Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems.
- Relocation race fix for Gen4/5
- A couple ICL fixes and dependencies for above Fixes:.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com
2018-11-16 08:52:14 +10:00
Nicholas Kazlauskas
07e3a1cfb0 drm/amd/display: Support amdgpu "max bpc" connector property (v2)
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.

It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.

This patch should be updated/replaced later once common drm support
for max bpc lands.

Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f300 ("drm/amd/display: Do not limit color depth to 8bpc")

v2: rebase on upstream (Alex)

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-15 17:48:31 -05:00
Nicholas Kazlauskas
69756c6ff0 drm/amdgpu: Add amdgpu "max bpc" connector property (v2)
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.

This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.

This proprety should be removed once common drm support for max bpc
lands.

v2: rebase on upstream (Alex)

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-15 17:48:15 -05:00
Tony Lindgren
f01067005e bus: ti-sysc: Detect devices for debug on omap5
We want to see the names of detected devices when DEBUG is enabled.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15 14:46:53 -08:00
Tony Lindgren
2c63a833e4 bus: ti-sysc: Add mcasp optional clocks flag
We have OPT_CLKS_NEEDED in legacy platform data, but it's missing
from the ti-sysc driver for device tree based configuration.

In order to pass OPT_CLKS_NEEDED quirk flag we need to update omap4 module
data and add a new compatible for dra7 as the module layout is different
from sysc_regbits_omap4_mcasp.

Fixes: 70a65240ef ("bus: ti-sysc: Add register bits for interconnect
target modules")
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15 14:46:53 -08:00
Tony Lindgren
7b4f8ac2f1 bus: ti-sysc: Fix getting optional clocks in clock_roles
We can have holes in clock_roles with interface clock missing for
example. Currently getting an optional clock will fail if there are
only a functional clock and an optional clock.

Fixes: 09dfe58107 ("bus: ti-sysc: Add handling for clkctrl opt clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15 14:46:52 -08:00
David S. Miller
4e86889b52 Merge branch 'mlxsw-ERP-sharing-multiple-masks'
Ido Schimmel says:

====================
mlxsw: spectrum: acl: Introduce ERP sharing by multiple masks

Jiri says:

The Spectrum-2 hardware has limitation number of ERPs per-region. In
order to accommodate more masks than number of ERPs, the hardware
supports to insert rules with delta bits. By that, the rules with masks
that differ in up-to 8 consecutive bits can share the same ERP.

Patches 1 and 2 fix couple of issues that would appear in existing
selftests after adding delta support

Patch 3 introduces a generic object aggregation library. Now it is
static, but it will get extended for recalculation of aggregations in
the future in order to reach more optimal aggregation.

Patch 4 just simply converts existing ERP code to use the objagg library
instead of a rhashtable.

Patches 5-9 do more or less small changes to prepare ground for the last
patch.

Patch 10 fills-up delta callbacks of objagg library and utilizes the
delta bits for rule insertion.

The last patch adds selftest to test the mlxsw Spectrum-2 delta flows.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:44 -08:00
Jiri Pirko
3b423271b8 selftests: mlxsw: spectrum-2: Add simple delta test
Track the basic codepaths of delta handling, using objagg tracepoints.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
c22291f7cf mlxsw: spectrum: acl: Implement delta for ERP
Allow ERP sharing for multiple mask. Do it by properly implementing
delta_create() objagg object. Use the computed delta info for inserting
rules in A-TCAM.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
c293ba3403 mlxsw: spectrum: acl: Push code related to num_ctcam_erps inc/dec into separate helpers
Later on the same code is going to be needed for deltas as well. So push
the procedures related to increment and decrement of num_ctcam_erps
into a separate helpers.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
59600844cf mlxsw: spectrum: acl: Remove mlxsw_afk_encode() block range args and key/mask check
Since two remaining users of mlxsw_afk_encode() do not specify
block ranges to work on, remove the args. Also, key/mask is always
non-NULL now, so skip the checks.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
b1ce60e621 mlxsw: spectrum: acl: Don't encode the key again in mlxsw_sp_acl_atcam_12kb_lkey_id_get()
No need to do key encoding again in
mlxsw_sp_acl_atcam_12kb_lkey_id_get(). Instead of that, introduce
a new helper that would just clear unused blocks.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
3bc6f3858a mlxsw: core_acl: Change order of args of ops->encode_block()
Change order so it is aligned with the usual case where the "write_to"
buffer comes as the first arg.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
d07cd66060 mlxsw: spectrum: acl: Pass key pointer to master_mask_set/clear
The device requires that the master mask of each region will be
composed from a logical OR between all the unmasked bits in the region.
Currently, this is just a logical OR between all the eRPs used in the
region, but the next patch is going to introduce delta bits support
which need to be taken into account as well.

Since the eRP does not include the delta bits, pass the key pointer to
mlxsw_sp_acl_erp_master_mask_set/clear instead. Convert key->mask to
the bitmap on fly.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
c71abd7d94 mlxsw: spectrum: acl_erp: Convert to use objagg for tracking ERPs
Currently the ERPs are tracked internally in a hashtable. Benefit from
the newly introduced objagg library and use it to track ERPs. At this
point, there is no nesting of objects done, as the delta_create callback
always returns -EOPNOTSUPP. On the way, add "mask" into ERP mask get and
set functions and struct names.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
0a020d416d lib: introduce initial implementation of object aggregation manager
This lib tracks objects which could be of two types:
1) root object
2) nested object - with a "delta" which differentiates it from
                   the associated root object
The objects are tracked by a hashtable and reference-counted. User is
responsible of implementing callbacks to create/destroy root entity
related to each root object and callback to create/destroy nested object
delta.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
7dc5a0eeea selftests: Adjust spectrum-2 ctcam_two_atcam_masks_test
In order for this to behave as required with delta bits, change the mask
for rule with handle 103.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Jiri Pirko
36107c485f selftests: Adjust spectrum-2 two_mask_test
In order for this to behave as required with delta bits, change the mask
for rule with handle 103.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 14:43:43 -08:00
Kirill Marinushkin
fd7de6370c
ASoC: Add documentation for pcm3060 property out-single-ended
Output of pcm3060 codec may be configured as single-ended or differential

Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-15 14:25:41 -08:00
zoro
fe06051dbf
regulator/of_get_regulator: add child path to find the regulator supplier
when the VIR_LDO1 regulator supplier is it's brother,
we can't find the supplier.

example code :
&vir_regulator {
	ldo0_vir: ldo0-virtual {
		regulator-compatible = "VIR_LDO0";
		regulator-name= "VIR_LDO0";
		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <2000000>;
	};
	ldo1_vir: ldo1-virtual {
		regulator-compatible = "VIR_LDO1";
		regulator-name= "VIR_LDO1";
		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <3000000>;
		ldo1-supply = <&ldo0_vir>;
	};
	...
}

so we add the child ptah to find the suppier.

Signed-off-by: zoro <long17.cool@163.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-15 14:15:32 -08:00
Luca Coelho
5d041c46cc iwlwifi: mvm: don't use SAR Geo if basic SAR is not used
We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo
tables define offsets in relation to the basic SAR table in use.

To fix this, make iwl_mvm_sar_init() return one in case WRDS is not
available, so we can skip reading WGDS entirely.

Fixes: a6bff3cb19 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15 23:50:59 +02:00
Shahar S Matityahu
54f3f994e9 iwlwifi: fix D3 debug data buffer memory leak
If the driver is unloaded when D3 debug data pulling is enabled
but not triggered, it doesn't release the data buffer.

Fix this by adding iwl_fw_runtime_free and calling it from the
relevant places.

Fixes: 2d8c261511 ("iwlwifi: add d3 debug data support")
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15 23:50:59 +02:00
Emmanuel Grumbach
82715ac71e iwlwifi: mvm: fix regulatory domain update when the firmware starts
When the firmware starts, it doesn't have any regulatory
information, hence it uses the world wide limitations. The
driver can feed the firmware with previous knowledge that
was kept in the driver, but the firmware may still not
update its internal tables.

This happens when we start a BSS interface, and then the
firmware can change the regulatory tables based on our
location and it'll use more lenient, location specific
rules. Then, if the firmware is shut down (when the
interface is brought down), and then an AP interface is
created, the firmware will forget the country specific
rules.

The host will think that we are in a certain country that
may allow channels and will try to teach the firmware about
our location, but the firmware may still not allow to drop
the world wide limitations and apply country specific rules
because it was just re-started.

In this case, the firmware will reply with MCC_RESP_ILLEGAL
to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let
the upper layers (cfg80211 / hostapd) know that the channel
list they know about has been updated.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15 23:50:58 +02:00