Commit graph

982,081 commits

Author SHA1 Message Date
Sara Sharon
e488e593a7 iwlwifi: dbg: use helper to check if debug type is set
This enables to incorporate more logic in one place.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:21 +02:00
Andrei Otcheretianski
dc1aca22f8 iwlwifi: mvm: Send non offchannel traffic via AP sta
TDLS discovery response frame is a unicast direct frame to the peer.
Since we don't have a STA for this peer, this frame goes through
iwl_tx_skb_non_sta(). As the result aux_sta and some completely
arbitrary queue would be selected for this frame, resulting in a queue
hang.  Fix that by sending such frames through AP sta instead.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:20 +02:00
Naftali Goldstein
18ab513ebf iwlwifi: mvm: add description to a few generic assert numbers
FW asserts 0x70, 0x71, and 0x73 all just mean that the real error
happened in another MAC, and to look there for the problem. Add their
descriptions to the assert number lookup table so users get a nicer
error message in the logs.
Also, since the 4 most-significant bits of the assert number are
dynamic, and depend on which MAC the assert occurred on, ignore those
bits when looking up the assert name.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:20 +02:00
Sara Sharon
124e0eba90 iwlwifi: dbg: avoid passing trigger around
The trigger structure is being passed around, when
all we care about is whether to dump only monitor
or not. Pass a bool instead.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:19 +02:00
Sara Sharon
f09450e32a iwlwifi: pcie: don't reset TXQ write pointer
Currently code sets the write pointer when getting the TX queue
allocate response. This causes a redundant interrupt with any actual
change in the pointer. Remove this write altogether.

Fixes: 310181ec34 ("iwlwifi: move to TVQM mode")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:18 +02:00
Avraham Stern
0dde2440a7 iwlwifi: mvm: toggle tx antenna if tx fails during connection establishment
If tx fails during connection establishment, try another antenna for
the next tx. This will increase the chance to establish connection if
one of the antennas is blocked.  Note that the antenna is toggled even
when failing to tx data frames since connection establishment may use
EAPOLs for 802.1X authentication/ 4 way handshake.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:18 +02:00
Naftali Goldstein
5c2dbebb44 iwlwifi: fw: do not set sgi bits for HE connection
If the association supports HE, HT/VHT rates will never be used for Tx
and therefore there's no need to set the sgi-per-channel-width-support
bits, so don't set them in this case.

Fixes: 110b32f065 ("iwlwifi: mvm: rs: add basic implementation of the new RS API handlers")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:17 +02:00
Avraham Stern
656fca00f3 iwlwifi: mvm: switch management tx antenna only on tx failure
Switch the antenna used for management tx only if previous tx failed.
If previous tx succeeded, there is no reason to switch antennas.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:16 +02:00
Tova Mussai
4724274410 iwlwifi: mvm: enable low latency for soft ap
Enable low latency for softAP in all modes (standalone, SCM
and DCM).
This is in order to minimize the time the softAP leaves the channel for
other operations

Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:16 +02:00
Shahar S Matityahu
8954e1eb22 iwlwifi: trans: Clear persistence bit when starting the FW
In D3 suspend flow in 9260 gen2 HW, the NIC receives two PERST signals.
The first PERST is expected and indicates the device on coming resume flow.
The second PERST causes FW restart FW restart.
In order to avoid this issue, the FW set the persistence bit on.
Once this bit is set, the FW ignores reset attempts.
The problem is when the FW gets assert during D3 and then the persistence
bit is set and causes the FW to ignore reset.
To handle this issue, the FW opens the preg bit which allows access
to the persistence bit, so that the driver clear the persistence bit
and reset the NIC.

The flow is as follows:
the driver checks if the persistence bit is set.
If the bit is set, the driver checks if he can clear the bit.
If the driver can not clear the bit then there is no point to continue
configuring the NIC since it will fail.

The fix was added is in start HW flow instead of the resume flow since in
general, if the persistence bit is set, the driver can not start the FW.
So it is good to check it when we start configuring the NIC.

The driver does not need to close the preg bit since the FW close it
during the start flow.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:15 +02:00
Johannes Berg
f3f240f973 iwlwifi: mvm: remove queue_info_lock
All the queue management code runs under mvm->mutex, so there are
only very few cases of accessing the data structures without it:
 * TX path, which doesn't take any locks anyway
 * iwl_mvm_wake_sw_queue() and iwl_mvm_stop_sw_queue() where we
   just (atomically) read a bitmap, so the lock isn't needed.

Therefore, we can remove the spinlock. This enables some cleanup
in the ugly locking in iwl_mvm_inactivity_check().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:14 +02:00
Johannes Berg
06bc6f6ed4 iwlwifi: mvm: synchronize TID queue removal
When we mark a TID as no longer having a queue, there's no
guarantee the TX path isn't using this txq_id right now,
having accessed it just before we reset the value. To fix
this, add synchronize_net() when we change the TIDs from
having a queue to not having one, so that we can then be
sure that the TX path is no longer accessing that queue.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:14 +02:00
YueHaibing
41c4588b06 iwlwifi: mvm: remove set but not used variable 'he_phy_data'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c: In function 'iwl_mvm_rx_mpdu_mq':
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c:1386:7: warning:
 variable 'he_phy_data' set but not used [-Wunused-but-set-variable]
   u64 he_phy_data;

'he_phy_data' never used since be introduce in
commit 18ead597da ("iwlwifi: support new rx_mpdu_desc api")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11 11:06:13 +02:00
Alexei Starovoitov
407be8d03e Merge branch 'narrow-loads'
Andrey Ignatov says:

====================
This patch set adds support for narrow loads with offset > 0 to BPF
verifier.

Patch 1 provides more details and is the main patch in the set.
Patches 2 and 3 add new test cases to test_verifier and test_sock_addr
selftests.

v1->v2:
- fix -Wdeclaration-after-statement warning.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 22:30:00 -08:00
Andrey Ignatov
e7605475f5 selftests/bpf: Test narrow loads with off > 0 for bpf_sock_addr
Add more test cases for context bpf_sock_addr to test narrow loads with
offset > 0 for ctx->user_ip4 field (__u32):
* off=1, size=1;
* off=2, size=1;
* off=3, size=1;
* off=2, size=2.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 22:29:59 -08:00
Andrey Ignatov
6c2afb674d selftests/bpf: Test narrow loads with off > 0 in test_verifier
Test the following narrow loads in test_verifier for context __sk_buff:
* off=1, size=1 - ok;
* off=2, size=1 - ok;
* off=3, size=1 - ok;
* off=0, size=2 - ok;
* off=1, size=2 - fail;
* off=0, size=2 - ok;
* off=3, size=2 - fail.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 22:29:59 -08:00
Andrey Ignatov
46f53a65d2 bpf: Allow narrow loads with offset > 0
Currently BPF verifier allows narrow loads for a context field only with
offset zero. E.g. if there is a __u32 field then only the following
loads are permitted:
  * off=0, size=1 (narrow);
  * off=0, size=2 (narrow);
  * off=0, size=4 (full).

On the other hand LLVM can generate a load with offset different than
zero that make sense from program logic point of view, but verifier
doesn't accept it.

E.g. tools/testing/selftests/bpf/sendmsg4_prog.c has code:

  #define DST_IP4			0xC0A801FEU /* 192.168.1.254 */
  ...
  	if ((ctx->user_ip4 >> 24) == (bpf_htonl(DST_IP4) >> 24) &&

where ctx is struct bpf_sock_addr.

Some versions of LLVM can produce the following byte code for it:

       8:       71 12 07 00 00 00 00 00         r2 = *(u8 *)(r1 + 7)
       9:       67 02 00 00 18 00 00 00         r2 <<= 24
      10:       18 03 00 00 00 00 00 fe 00 00 00 00 00 00 00 00         r3 = 4261412864 ll
      12:       5d 32 07 00 00 00 00 00         if r2 != r3 goto +7 <LBB0_6>

where `*(u8 *)(r1 + 7)` means narrow load for ctx->user_ip4 with size=1
and offset=3 (7 - sizeof(ctx->user_family) = 3). This load is currently
rejected by verifier.

Verifier code that rejects such loads is in bpf_ctx_narrow_access_ok()
what means any is_valid_access implementation, that uses the function,
works this way, e.g. bpf_skb_is_valid_access() for __sk_buff or
sock_addr_is_valid_access() for bpf_sock_addr.

The patch makes such loads supported. Offset can be in [0; size_default)
but has to be multiple of load size. E.g. for __u32 field the following
loads are supported now:
  * off=0, size=1 (narrow);
  * off=1, size=1 (narrow);
  * off=2, size=1 (narrow);
  * off=3, size=1 (narrow);
  * off=0, size=2 (narrow);
  * off=2, size=2 (narrow);
  * off=0, size=4 (full).

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 22:29:59 -08:00
David S. Miller
e15e067d06 sctp: Fix SKB list traversal in sctp_intl_store_ordered().
Same change as made to sctp_intl_store_reasm().

To be fully correct, an iterator has an undefined value when something
like skb_queue_walk() naturally terminates.

This will actually matter when SKB queues are converted over to
list_head.

Formalize what this code ends up doing with the current
implementation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10 19:32:23 -08:00
David S. Miller
348bbc25c4 sctp: Fix SKB list traversal in sctp_intl_store_reasm().
To be fully correct, an iterator has an undefined value when something
like skb_queue_walk() naturally terminates.

This will actually matter when SKB queues are converted over to
list_head.

Formalize what this code ends up doing with the current
implementation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10 19:28:27 -08:00
David S. Miller
9e733177c7 iucv: Remove SKB list assumptions.
Eliminate the assumption that SKBs and SKB list heads can
be cast to eachother in SKB list handling code.

This change also appears to fix a bug since the list->next pointer is
sampled outside of holding the SKB queue lock.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10 16:55:11 -08:00
David S. Miller
4a5a553dde brcmfmac: Use standard SKB list accessors in brcmf_sdiod_sglist_rw.
Instead of direct SKB list pointer accesses.

The loops in this function had to be rewritten to accommodate this
more easily.

The first loop iterates now over the target list in the outer loop,
and triggers an mmc data operation when the per-operation limits are
hit.

Then after the loops, if we have any residue, we trigger the last
and final operation.

For the page aligned workaround, where we have to copy the read data
back into the original list of SKBs, we use a two-tiered loop.  The
outer loop stays the same and iterates over pktlist, and then we have
an inner loop which uses skb_peek_next().  The break logic has been
simplified because we know that the aggregate length of the SKBs in
the source and destination lists are the same.

This change also ends up fixing a bug, having to do with the
maintainance of the seg_sz variable and how it drove the outermost
loop.  It begins as:

	seg_sz = target_list->qlen;

ie. the number of packets in the target_list queue.  The loop
structure was then:

	while (seq_sz) {
		...
		while (not at end of target_list) {
			...
			sg_cnt++
			...
		}
		...
		seg_sz -= sg_cnt;

The assumption built into that last statement is that sg_cnt counts
how many packets from target_list have been fully processed by the
inner loop.  But this not true.

If we hit one of the limits, such as the max segment size or the max
request size, we will break and copy a partial packet then contine
back up to the top of the outermost loop.

With the new loops we don't have this problem as we don't guard the
loop exit with a packet count, but instead use the progression of the
pkt_next SKB through the list to the end.  The general structure is:

	sg_cnt = 0;
	skb_queue_walk(target_list, pkt_next) {
		pkt_offset = 0;
		...
		sg_cnt++;
		...
		while (pkt_offset < pkt_next->len) {
			pkt_offset += sg_data_size;
			if (queued up max per request)
				mmc_submit_one();
		}
	}
	if (sg_cnt)
		mmc_submit_one();

The variables that maintain where we are in the MMC command state such
as req_sz, sg_cnt, and sgl are reset when we emit one of these full
sized requests.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10 16:31:15 -08:00
Alexei Starovoitov
f2cbf95826 Merge branch 'bpftool-flow-dissector'
Stanislav Fomichev says:

====================
v5 changes:
* FILE -> PATH for load/loadall (can be either file or directory now)
* simpler implementation for __bpf_program__pin_name
* removed p_err for REQ_ARGS checks
* parse_atach_detach_args -> parse_attach_detach_args
* for -> while in bpf_object__pin_{programs,maps} recovery

v4 changes:
* addressed another round of comments/style issues from Jakub Kicinski &
  Quentin Monnet (thanks!)
* implemented bpf_object__pin_maps and bpf_object__pin_programs helpers and
  used them in bpf_program__pin
* added new pin_name to bpf_program so bpf_program__pin
  works with sections that contain '/'
* moved *loadall* command implementation into a separate patch
* added patch that implements *pinmaps* to pin maps when doing
  load/loadall

v3 changes:
* (maybe) better cleanup for partial failure in bpf_object__pin
* added special case in bpf_program__pin for programs with single
  instances

v2 changes:
* addressed comments/style issues from Jakub Kicinski & Quentin Monnet
* removed logic that populates jump table
* added cleanup for partial failure in bpf_object__pin

This patch series adds support for loading and attaching flow dissector
programs from the bpftool:

* first patch fixes flow dissector section name in the selftests (so
  libbpf auto-detection works)
* second patch adds proper cleanup to bpf_object__pin, parts of which are now
  being used to attach all flow dissector progs/maps
* third patch adds special case in bpf_program__pin for programs with
  single instances (we don't create <prog>/0 pin anymore, just <prog>)
* forth patch adds pin_name to the bpf_program struct
  which is now used as a pin name in bpf_program__pin et al
* fifth patch adds *loadall* command that pins all programs, not just
  the first one
* sixth patch adds *pinmaps* argument to load/loadall to let users pin
  all maps of the obj file
* seventh patch adds actual flow_dissector support to the bpftool and
  an example
====================

Acked-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:58:12 -08:00
Stanislav Fomichev
092f089273 bpftool: support loading flow dissector
This commit adds support for loading/attaching/detaching flow
dissector program.

When `bpftool loadall` is called with a flow_dissector prog (i.e. when the
'type flow_dissector' argument is passed), we load and pin all programs.
User is responsible to construct the jump table for the tail calls.

The last argument of `bpftool attach` is made optional for this use
case.

Example:
bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \
        /sys/fs/bpf/flow type flow_dissector \
	pinmaps /sys/fs/bpf/flow

bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
        key 0 0 0 0 \
        value pinned /sys/fs/bpf/flow/IP

bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
        key 1 0 0 0 \
        value pinned /sys/fs/bpf/flow/IPV6

bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
        key 2 0 0 0 \
        value pinned /sys/fs/bpf/flow/IPV6OP

bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
        key 3 0 0 0 \
        value pinned /sys/fs/bpf/flow/IPV6FR

bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
        key 4 0 0 0 \
        value pinned /sys/fs/bpf/flow/MPLS

bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
        key 5 0 0 0 \
        value pinned /sys/fs/bpf/flow/VLAN

bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector

Tested by using the above lines to load the prog in
the test_flow_dissector.sh selftest.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:56:11 -08:00
Stanislav Fomichev
3767a94b32 bpftool: add pinmaps argument to the load/loadall
This new additional argument lets users pin all maps from the object at
specified path.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:56:11 -08:00
Stanislav Fomichev
77380998d9 bpftool: add loadall command
This patch adds new *loadall* command which slightly differs from the
existing *load*. *load* command loads all programs from the obj file,
but pins only the first programs. *loadall* pins all programs from the
obj file under specified directory.

The intended usecase is flow_dissector, where we want to load a bunch
of progs, pin them all and after that construct a jump table.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:56:11 -08:00
Stanislav Fomichev
33a2c75c55 libbpf: add internal pin_name
pin_name is the same as section_name where '/' is replaced
by '_'. bpf_object__pin_programs is converted to use pin_name
to avoid the situation where section_name would require creating another
subdirectory for a pin (as, for example, when calling bpf_object__pin_programs
for programs in sections like "cgroup/connect6").

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:56:11 -08:00
Stanislav Fomichev
fd734c5cca libbpf: bpf_program__pin: add special case for instances.nr == 1
When bpf_program has only one instance, don't create a subdirectory with
per-instance pin files (<prog>/0). Instead, just create a single pin file
for that single instance. This simplifies object pinning by not creating
unnecessary subdirectories.

This can potentially break existing users that depend on the case
where '/0' is always created. However, I couldn't find any serious
usage of bpf_program__pin inside the kernel tree and I suppose there
should be none outside.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:56:10 -08:00
Stanislav Fomichev
0c19a9fbc9 libbpf: cleanup after partial failure in bpf_object__pin
bpftool will use bpf_object__pin in the next commits to pin all programs
and maps from the file; in case of a partial failure, we need to get
back to the clean state (undo previous program/map pins).

As part of a cleanup, I've added and exported separate routines to
pin all maps (bpf_object__pin_maps) and progs (bpf_object__pin_programs)
of an object.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:56:10 -08:00
Stanislav Fomichev
108d50a976 selftests/bpf: rename flow dissector section to flow_dissector
Makes it compatible with the logic that derives program type
from section name in libbpf_prog_type_by_name.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:56:10 -08:00
Alexei Starovoitov
0157edc859 Merge branch 'device-ops-as-cb'
Quentin Monnet says:

====================
For passing device functions for offloaded eBPF programs, there used to
be no place where to store the pointer without making the non-offloaded
programs pay a memory price.

As a consequence, three functions were called with ndo_bpf() through
specific commands. Now that we have struct bpf_offload_dev, and since none
of those operations rely on RTNL, we can turn these three commands into
hooks inside the struct bpf_prog_offload_ops, and pass them as part of
bpf_offload_dev_create().

This patch set changes the offload architecture to do so, and brings the
relevant changes to the nfp and netdevsim drivers.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:55 -08:00
Quentin Monnet
16a8cb5cff bpf: do not pass netdev to translate() and prepare() offload callbacks
The kernel functions to prepare verifier and translate for offloaded
program retrieve "offload" from "prog", and "netdev" from "offload".
Then both "prog" and "netdev" are passed to the callbacks.

Simplify this by letting the drivers retrieve the net device themselves
from the offload object attached to prog - if they need it at all. There
is currently no need to pass the netdev as an argument to those
functions.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:54 -08:00
Quentin Monnet
a40a26322a bpf: pass prog instead of env to bpf_prog_offload_verifier_prep()
Function bpf_prog_offload_verifier_prep(), called from the kernel BPF
verifier to run a driver-specific callback for preparing for the
verification step for offloaded programs, takes a pointer to a struct
bpf_verifier_env object. However, no driver callback needs the whole
structure at this time: the two drivers supporting this, nfp and
netdevsim, only need a pointer to the struct bpf_prog instance held by
env.

Update the callback accordingly, on kernel side and in these two
drivers.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:54 -08:00
Quentin Monnet
eb9119471e bpf: pass destroy() as a callback and remove its ndo_bpf subcommand
As part of the transition from ndo_bpf() to callbacks attached to struct
bpf_offload_dev for some of the eBPF offload operations, move the
functions related to program destruction to the struct and remove the
subcommand that was used to call them through the NDO.

Remove function __bpf_offload_ndo(), which is no longer used.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:54 -08:00
Quentin Monnet
b07ade27e9 bpf: pass translate() as a callback and remove its ndo_bpf subcommand
As part of the transition from ndo_bpf() to callbacks attached to struct
bpf_offload_dev for some of the eBPF offload operations, move the
functions related to code translation to the struct and remove the
subcommand that was used to call them through the NDO.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:54 -08:00
Quentin Monnet
00db12c3d1 bpf: call verifier_prep from its callback in struct bpf_offload_dev
In a way similar to the change previously brought to the verify_insn
hook and to the finalize callback, switch to the newly added ops in
struct bpf_prog_offload for calling the functions used to prepare driver
verifiers.

Since the dev_ops pointer in struct bpf_prog_offload is no longer used
by any callback, we can now remove it from struct bpf_prog_offload.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:54 -08:00
Quentin Monnet
6dc18fa6f4 bpf: call finalize() from its callback in struct bpf_offload_dev
In a way similar to the change previously brought to the verify_insn
hook, switch to the newly added ops in struct bpf_prog_offload for
calling the functions used to perform final verification steps for
offloaded programs.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:53 -08:00
Quentin Monnet
341b3e7b7b bpf: call verify_insn from its callback in struct bpf_offload_dev
We intend to remove the dev_ops in struct bpf_prog_offload, and to only
keep the ops in struct bpf_offload_dev instead, which is accessible from
more locations for passing function pointers.

But dev_ops is used for calling the verify_insn hook. Switch to the
newly added ops in struct bpf_prog_offload instead.

To avoid table lookups for each eBPF instruction to verify, we remember
the offdev attached to a netdev and modify bpf_offload_find_netdev() to
avoid performing more than once a lookup for a given offload object.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:53 -08:00
Quentin Monnet
1385d755cf bpf: pass a struct with offload callbacks to bpf_offload_dev_create()
For passing device functions for offloaded eBPF programs, there used to
be no place where to store the pointer without making the non-offloaded
programs pay a memory price.

As a consequence, three functions were called with ndo_bpf() through
specific commands. Now that we have struct bpf_offload_dev, and since
none of those operations rely on RTNL, we can turn these three commands
into hooks inside the struct bpf_prog_offload_ops, and pass them as part
of bpf_offload_dev_create().

This commit effectively passes a pointer to the struct to
bpf_offload_dev_create(). We temporarily have two struct
bpf_prog_offload_ops instances, one under offdev->ops and one under
offload->dev_ops. The next patches will make the transition towards the
former, so that offload->dev_ops can be removed, and callbacks relying
on ndo_bpf() added to offdev->ops as well.

While at it, rename "nfp_bpf_analyzer_ops" as "nfp_bpf_dev_ops" (and
similarly for netdevsim).

Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:53 -08:00
Quentin Monnet
1da6f57338 nfp: bpf: move nfp_bpf_analyzer_ops from verifier.c to offload.c
We are about to add several new callbacks to the struct, all of them
defined in offload.c. Move the struct bpf_prog_offload_ops object in
that file. As a consequence, nfp_verify_insn() and nfp_finalize() can no
longer be static.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-10 15:39:53 -08:00
Rafael J. Wysocki
97dc6c03c1 Merge branch 'pm-cpuidle'
* pm-cpuidle:
  ARM: cpuidle: Convert to use cpuidle_register|unregister()
  ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO
2018-11-11 00:02:37 +01:00
Michał Mirosław
6083e28aa0 OVS: remove VLAN_TAG_PRESENT - fixup
It turns out I missed one VLAN_TAG_PRESENT in OVS code while rebasing.
This fixes it.

Fixes: 9df46aefaf ("OVS: remove use of VLAN_TAG_PRESENT")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10 13:42:16 -08:00
Jens Axboe
8e18ebef4d null_blk: remove unused nullb device
The compiler rightfully complains:

drivers/block/null_blk_main.c: In function ‘null_complete_rq’:
drivers/block/null_blk_main.c:647:16: warning: unused variable ‘nullb’ [-Wunused-variable]
  struct nullb *nullb = rq->q->queuedata;
                ^~~~~

Fixes: 49f6613632 ("nullb: remove leftover legacy request code")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10 13:03:52 -07:00
Linus Torvalds
e255aee5b6 TTY/Serial fixes for 4.20-rc2
Here are some small tty fixes for 4.20-rc2
 
 One of these missed the original 4.19-final release, I missed that I
 hadn't done a pull request for it as it was in linux-next and my branch
 for a long time, that's my fault.
 
 The others are small, fixing some reported issues and finally fixing the
 termios mess for alpha so that glibc has a chance to implement some
 missing functionality that has been pending for many years now.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW+cpjw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymcQQCgt4IbK1wm/bxZqikhg64GS7J7IdkAoLoK1gKi
 Sq+KsJX2qr4GuAcxJIjr
 =uyeQ
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small tty fixes for 4.20-rc2

  One of these missed the original 4.19-final release, I missed that I
  hadn't done a pull request for it as it was in linux-next and my
  branch for a long time, that's my fault.

  The others are small, fixing some reported issues and finally fixing
  the termios mess for alpha so that glibc has a chance to implement
  some missing functionality that has been pending for many years now.

  All of these have been in linux-next with no reported issues"

* tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout
  arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
  termios, tty/tty_baudrate.c: fix buffer overrun
  vt: fix broken display when running aptitude
  serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
2018-11-10 13:32:14 -06:00
Linus Torvalds
20ef6d06ef drm: i915, amdgpu, sun4i, exynos and etnaviv fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb5yW/AAoJEAx081l5xIa+UNgQAJeOCWyi87JD02yEbU1Ok0sD
 IirzTRZrA0Yz3KQt3W3piHgtTVD9VBbP3pU3U/3xXdMiHuPFTAowaom8dUCKExbH
 XuTnfdswqSCjBTMgNseCqBP5sTnLx/uNaw9x6KpaYIkpe9c0hCQ9ND8HWk339eLs
 UEgHGWvC6NTJ3vjG/iKmoamp4Pbw3v5ELEz4rzs/GHmUAdU2+vDh4UPf4KnVwxGe
 Dk4kjI6ijCB/xXS5Zzpj6m4SMPILyMs4CsSNXrW31o2+WkTWaMpgJgMWzufVF3Va
 0r6KSbXPkaJSNnIqRiTdnRR048/fx1FgVbHJsYkzKRSh9WTYjlxsjoGJNiu5TNIi
 ibkDeBG6Ve3XFt6spSQJCQE0vFGNKoJuXnI8n97/OH4d6VoXKm96vwy+rP5w3jhg
 Jv0/V+8qRf7rqOXwQoX+2OJdwvxX+tzKwdTqxFgCm5W4/UjCp6junJxyXyOU9CrL
 OPYWYq2Ooqn2aeuUBTf5TdtbpaReTbBtQ0OQZM4fFpCdl2Qnfx5mwMgTzXLWos1x
 kWdzUkFKAS8w3p7oZDiLvGc0lU7GTxOOc8EAfoeNJPud6ONinIVwj+6EC2AKPldG
 NuX+HZSemF0iE4dN44+646qBP0fubVlrquF2pn/QJQ729d3tL5kHG/8paxzZzNmB
 1hMpHKHoYOsghKbQ8xz/
 =2/8D
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "drm: i915, amdgpu, sun4i, exynos and etnaviv fixes:

   - amdgpu has some display fixes, KFD ioctl fixes and a Vega20 bios
     interaction fix.

   - sun4i has some NULL checks added

   - i915 has a 32-bit system fix, LPE audio oops, and HDMI2.0 clock
     fixes.

   - Exynos has a 3 regression fixes (one frame counter, fbdev missing,
     dsi->panel check)

   - Etnaviv has a single fencing fix for GPU recovery"

* tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm: (39 commits)
  drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()
  drm/amd/display: Drop reusing drm connector for MST
  drm/amd/display: Cleanup MST non-atomic code workaround
  drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled
  drm/amd/powerplay: set a default fclk/gfxclk ratio
  drm/amdgpu/display/dce11: only enable FBC when selected
  drm/amdgpu/display/dm: handle FBC dc feature parameter
  drm/amdgpu/display/dc: add FBC to dc_config
  drm/amdgpu: add DC feature mask module parameter
  drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)
  drm/amdgpu/vega20: add CLK base offset
  drm/amd/display: Stop leaking planes
  drm/amd/display: Fix misleading buffer information
  Revert "drm/amd/display: set backlight level limit to 1"
  drm/amd: Update atom_smu_info_v3_3 structure
  drm/i915: Fix ilk+ watermarks when disabling pipes
  drm/sun4i: tcon: prevent tcon->panel dereference if NULL
  drm/sun4i: tcon: fix check of tcon->panel null pointer
  drm/i915: Don't oops during modeset shutdown after lpe audio deinit
  drm/i915: Mark pin flags as u64
  ...
2018-11-10 13:29:47 -06:00
Linus Torvalds
1de4f2ef21 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace fixes from Eric Biederman:
 "I believe all of these are simple obviously correct bug fixes. These
  fall into two groups:

   - Fixing the implementation of MNT_LOCKED which prevents lesser
     privileged users from seeing unders mounts created by more
     privileged users.

   - Fixing the extended uid and group mapping in user namespaces.

  As well as ensuring the code looks correct I have spot tested these
  changes as well and in my testing the fixes are working"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mount: Prevent MNT_DETACH from disconnecting locked mounts
  mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
  mount: Retest MNT_LOCKED in do_umount
  userns: also map extents in the reverse map to kernel IDs
2018-11-10 13:27:58 -06:00
Linus Torvalds
a1aa42f1d8 A small set of fixes for clk drivers. One to fix a DT refcount
imbalance, two to mark some Amlogic clks as critical, and one final
 one that fixes a clk name for the Qualcomm driver merged this cycle.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlvmB2gRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWI5w//ZvHmJYTxdIecDxjCQU2NUH22iB11K1Za
 gp3Uo58DatYZzu7ASpitFDhOpxxifAtG/QVlxzJ9CNKrCz1JqDRAr/1MwZpClqRX
 903d+pvyzpioG1KB5ODtiOTIH2l4q9Bqs+E7gy0XDKHqD0IXXReCBND9vEY5pNQc
 Ao5GNPqAwNgLGlqQ4B/21dIgmVxOL3HLSYtr2n0mcQKgMP8ppWm4Nfz1R1dMqFgO
 NRSSrAWrkOfarhknlm/SITdBQaRO3ZSJ4+ELqazG/usUMM7UfprEUlTs3Pvd+hER
 O6w8Kyn2WAKFSNE36lRbRZG1LXsYnukUkDRAbei1UTuliIq7EZQL1NbBYoUXDPmA
 5WMkV4ypFEeukeeo+FB4sYwmhPb+lZ4abw9AUnT00RmMzuIQjeaw0dngVc5HbDJu
 /K4M0Xi1ArTJNDQQPTdiXazc2XcICY8MwU8RsD8nlE8fsec0g7ofCNYPgZsVMjkn
 /1OjijaoOziNAzr5VxRVNPf/cs4HpjdIFZ7mC0S5qpFj8E0f9PdUW5wLsW8GeWO/
 Plf5YxzJQCSNfzKeJbMsbBKK1vnXZvkt1rvT0EWKqti4sj83wdzFFy+bE56H9jxR
 KE7y0dUFFWY8vBjoebYuFjJclJerypy3Ir1nYOdrryXW2PrdzjREdEEcwfRRuGYm
 YYGlFxGelGI=
 =YaeV
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A small set of fixes for clk drivers.

  One to fix a DT refcount imbalance, two to mark some Amlogic clks as
  critical, and one final one that fixes a clk name for the Qualcomm
  driver merged this cycle"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc: Fix board clock node name
  clk: meson: axg: mark fdiv2 and fdiv3 as critical
  clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL
  clk: fixed-factor: fix of_node_get-put imbalance
2018-11-10 13:25:55 -06:00
Dave Airlie
73b6f96cbc Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.20:
- DC MST fixes
- DC FBC fix
- Vega20 updates to support the latest vbios
- KFD type fixes for ioctl headers

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108035551.2904-1-alexander.deucher@amd.com
2018-11-11 04:23:02 +10:00
Dave Airlie
d10cf6da31 - sun4i: tcon->panel NULL deref protections (Giulio)
Cc: Giulio Benetti <giulio.benetti@micronovasrl.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlvjTQkACgkQlvcN/ahK
 BwpL+wf+ITKd7UR4xKsmAOaq5quKIAFgJQ6A/TSYo/v/B+rK8e+VwgCX7ZBNvZpW
 XEFH16UP3k7Rp6IdA+2fLuzanMUabsM2tW9oLXBPdptkuCIw7/gKB6SmIEnAmX5/
 GcidGEPQ2V+uYaPZ+KL7U/ETwIBPyznAMmQrcDKfxpXDp6A2g1J62lP6FWUhJVbM
 LfD5vTgCwXAUoMJVnZ0miBaf0d2nyUH2YwzDhQtc2+NPZ5W6wDpUEcqDL5fFMYXG
 6i+jLpaSWC2R9VmlHRKosojUrhDMvjvN5kC0TWF0HHrU8CAsmvfL7Zg4M/S98PU3
 +VNiySPHCV+akUfVrDHBKKe92XD+WQ==
 =S8SA
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- sun4i: tcon->panel NULL deref protections (Giulio)

Cc: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107205051.GA27823@art_vandelay
2018-11-11 04:20:01 +10:00
Dave Airlie
7d588f90fb Merge tag 'drm-intel-fixes-2018-11-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Bugzilla #108282 fixed: Avoid graphics corruption on 32-bit systems for Mesa 18.2.x
Avoid OOPS on LPE audio deinit. Remove two unused W/As.
Fix to correct HDMI 2.0 audio clock modes to spec.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108134508.GA28466@jlahtine-desk.ger.corp.intel.com
2018-11-11 04:14:23 +10:00
Jakub Kicinski
63c82997f5 net: sched: cls_flower: validate nested enc_opts_policy to avoid warning
TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only
currently contain further nested attributes, which are parsed by
hand, so the policy is never actually used resulting in a W=1
build warning:

net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=]
 enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = {

Add the validation anyway to avoid potential bugs when other
attributes are added and to make the attribute structure slightly
more clear.  Validation will also set extact to point to bad
attribute on error.

Fixes: 0a6e77784f ("net/sched: allow flower to match tunnel options")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10 09:55:30 -08:00