Commit graph

982,081 commits

Author SHA1 Message Date
Heiko Carstens
e494990e7b s390/dumpstack: print psw mask and address again
With pointer obfuscation the output of show_registers() became quite useless:

Krnl PSW : (____ptrval____) (____ptrval____) (__list_add_valid+0x98/0xa8)

In order to print the psw mask and address use %px instead of %p.
And the output looks again like this:

Krnl PSW : 0404d00180000000 00000000007c0dd0 (__list_add_valid+0x98/0xa8)

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10 07:37:20 +02:00
Ingo Franzki
52a34b34d4 s390/crypto: Enhance paes cipher to accept variable length key material
Enhance the paes_s390 kernel module to allow the paes cipher to
accept variable length key material. The key material accepted by
the paes cipher is a key blob of various types. As of today, two
key blob types are supported: CCA secure key blobs and protected
key blobs.

Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10 07:37:20 +02:00
Ingo Franzki
fb1136d658 s390/pkey: Introduce new API for transforming key blobs
Introduce a new ioctl API and in-kernel API to transform
a variable length key blob of any supported type into a
protected key.

Transforming a secure key blob uses the already existing
function pkey_sec2protk().
Transforming a protected key blob also verifies if the
protected key is still valid. If not, -ENODEV is returned.

Both APIs are described in detail in the header files
arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h.

Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10 07:37:19 +02:00
Ingo Franzki
cb26b9ff71 s390/pkey: Introduce new API for random protected key verification
Introduce a new ioctl API and in-kernel API to verify if a
random protected key is still valid. A protected key is
invalid when its wrapping key verification pattern does not
match the verification pattern of the LPAR. Each time an LPAR
is activated, a new LPAR wrapping key is generated and the
wrapping key verification pattern is updated.
Both APIs are described in detail in the header files
arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h.

Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10 07:37:18 +02:00
Ingo Franzki
af504452d1 s390/pkey: Add sysfs attributes to emit secure key blobs
Add binary read-only sysfs attributes for the pkey module
that can be used to read random ccadata secure keys from.
Keys are read from these attributes using a cat-like interface.

A typical use case for those keys is to encrypt a swap device
using the paes cipher. During processing of /etc/crypttab, the
random random ccadata secure key to encrypt the swap device is
read from one of the attributes.

The following attributes are added:
  ccadata/aes_128
  ccadata/aes_192
  ccadata/aes_256
  ccadata/aes_128_xts
  ccadata/aes_256_xts
Each attribute emits a secure key blob for the corresponding
key size and cipher mode.

Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10 07:37:17 +02:00
Ingo Franzki
d632c0478d s390/pkey: Add sysfs attributes to emit protected key blobs
Add binary read-only sysfs attributes for the pkey module
that can be used to read random protected keys from.
Keys are read from these attributes using a cat-like interface.

A typical use case for those keys is to encrypt a swap device
using the paes cipher. During processing of /etc/crypttab, the
random protected key to encrypt the swap device is read from
one of the attributes.

The following attributes are added:
  protkey/aes_128
  protkey/aes_192
  protkey/aes_256
  protkey/aes_128_xts
  protkey/aes_256_xts
Each attribute emits a protected key blob for the corresponding
key size and cipher mode.

Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10 07:37:14 +02:00
Yonghong Song
438363c0fe tools/bpf: use proper type and uapi perf_event.h header for libbpf
Use __u32 instead u32 in libbpf.c and also use
uapi perf_event.h instead of tools/perf/perf-sys.h.

Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 22:03:28 -07:00
Alexei Starovoitov
a0f99e6796 Merge branch 'xdp-vlan'
Jesper Dangaard Brouer says:

====================
While implementing PoC building blocks for eBPF code XDP+TC that can
manipulate VLANs headers, I discovered a bug in generic-XDP.

The fix should be backported to stable kernels.  Even-though
generic-XDP was introduced in v4.12, I think the bug is not exposed
until v4.14 in the mentined fixes commit.
====================

Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:59:10 -07:00
Jesper Dangaard Brouer
97396ff0bc selftests/bpf: add XDP selftests for modifying and popping VLAN headers
This XDP selftest also contain a small TC-bpf component. It provoke
the generic-XDP bug fixed in previous commit.

The selftest itself shows how to do VLAN manipulation from XDP and TC.
The test demonstrate how XDP ingress can remove a VLAN tag, and how TC
egress can add back a VLAN tag.

This use-case originates from a production need by ISP (kviknet.dk),
who gets DSL-lines terminated as VLAN Q-in-Q tagged packets, and want
to avoid having an net_device for every end-customer on the box doing
the L2 to L3 termination.
  The test-setup is done via a veth-pair and creating two network
namespaces (ns1 and ns2).  The 'ns1' simulate the ISP network that are
loading the BPF-progs stripping and adding VLAN IDs.  The 'ns2'
simulate the DSL-customer that are using VLAN tagged packets.

Running the script with --interactive, will simply not call the
cleanup function.  This gives the effect of creating a testlab, that
the users can inspect and play with.  The --verbose option will simply
request that the shell will print input lines as they are read, this
include comments, which in effect make the comments visible docs.

Reported-by: Yoel Caspersen <yoel@kviknet.dk>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:59:09 -07:00
Jesper Dangaard Brouer
4f775448f4 bpf: make TC vlan bpf_helpers avail to selftests
The helper bpf_skb_vlan_push is needed by next patch, and the helper
bpf_skb_vlan_pop is added for completeness, regarding VLAN helpers.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:59:09 -07:00
Jesper Dangaard Brouer
2972495699 net: fix generic XDP to handle if eth header was mangled
XDP can modify (and resize) the Ethernet header in the packet.

There is a bug in generic-XDP, because skb->protocol and skb->pkt_type
are setup before reaching (netif_receive_)generic_xdp.

This bug was hit when XDP were popping VLAN headers (changing
eth->h_proto), as skb->protocol still contains VLAN-indication
(ETH_P_8021Q) causing invocation of skb_vlan_untag(skb), which corrupt
the packet (basically popping the VLAN again).

This patch catch if XDP changed eth header in such a way, that SKB
fields needs to be updated.

V2: on request from Song Liu, use ETH_HLEN instead of mac_len,
in __skb_push() as eth_type_trans() use ETH_HLEN in paired skb_pull_inline().

Fixes: d445516966 ("net: xdp: support xdp generic on virtual devices")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:59:09 -07:00
Alexei Starovoitov
e0aa5cf591 Merge branch 'unsupported-map-lookup'
Prashant Bhole says:

====================
Currently when map a lookup fails, user space API can not make any
distinction whether given key was not found or lookup is not supported
by particular map.

In this series we modify return value of maps which do not support
lookup. Lookup on such map implementation will return -EOPNOTSUPP.
bpf() syscall with BPF_MAP_LOOKUP_ELEM command will set EOPNOTSUPP
errno. We also handle this error in bpftool to print appropriate
message.

Patch 1: adds handling of BPF_MAP_LOOKUP ELEM command of bpf syscall
such that errno will set to EOPNOTSUPP when map doesn't support lookup

Patch 2: Modifies the return value of map_lookup_elem() to EOPNOTSUPP
for maps which do not support lookup

Patch 3: Splits do_dump() in bpftool/map.c. Element printing code is
moved out into new function dump_map_elem(). This was done in order to
reduce deep indentation and accomodate further changes.

Patch 4: Changes in bpftool to print strerror() message when lookup
error is occured. This will result in appropriate message like
"Operation not supported" when map doesn't support lookup.

Patch 5: test_verifier: change fixup map naming convention as
suggested by Alexei

Patch 6: Added verifier tests to check whether verifier rejects call
to bpf_map_lookup_elem from bpf program. For all map types those
do not support map lookup.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:52:21 -07:00
Prashant Bhole
7c85c448e7 selftests/bpf: test_verifier, check bpf_map_lookup_elem access in bpf prog
map_lookup_elem isn't supported by certain map types like:
- BPF_MAP_TYPE_PROG_ARRAY
- BPF_MAP_TYPE_STACK_TRACE
- BPF_MAP_TYPE_XSKMAP
- BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH
Let's add verfier tests to check whether verifier prevents
bpf_map_lookup_elem call on above programs from bpf program.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:52:20 -07:00
Prashant Bhole
908142e61b selftests/bpf: test_verifier, change names of fixup maps
Currently fixup map are named like fixup_map1, fixup_map2, and so on.
As suggested by Alexei let's change change map names such that we can
identify map type by looking at the name.

This patch is basically a find and replace change:
fixup_map1  ->  fixup_map_hash_8b
fixup_map2  ->  fixup_map_hash_48b
fixup_map3  ->  fixup_map_hash_16b
fixup_map4  ->  fixup_map_array_48b

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:52:20 -07:00
Prashant Bhole
8ec92dc22e tools/bpf: bpftool, print strerror when map lookup error occurs
Since map lookup error can be ENOENT or EOPNOTSUPP, let's print
strerror() as error message in normal and JSON output.

This patch adds helper function print_entry_error() to print
entry from lookup error occurs

Example: Following example dumps a map which does not support lookup.

Output before:
root# bpftool map -jp dump id 40
[
    "key": ["0x0a","0x00","0x00","0x00"
    ],
    "value": {
        "error": "can\'t lookup element"
    },
    "key": ["0x0b","0x00","0x00","0x00"
    ],
    "value": {
        "error": "can\'t lookup element"
    }
]

root# bpftool map dump id 40
can't lookup element with key:
0a 00 00 00
can't lookup element with key:
0b 00 00 00
Found 0 elements

Output after changes:
root# bpftool map dump -jp  id 45
[
    "key": ["0x0a","0x00","0x00","0x00"
    ],
    "value": {
        "error": "Operation not supported"
    },
    "key": ["0x0b","0x00","0x00","0x00"
    ],
    "value": {
        "error": "Operation not supported"
    }
]

root# bpftool map dump id 45
key:
0a 00 00 00
value:
Operation not supported
key:
0b 00 00 00
value:
Operation not supported
Found 0 elements

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:52:20 -07:00
Prashant Bhole
18a781daa9 tools/bpf: bpftool, split the function do_dump()
do_dump() function in bpftool/map.c has deep indentations. In order
to reduce deep indent, let's move element printing code out of
do_dump() into dump_map_elem() function.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:52:20 -07:00
Prashant Bhole
3b4a63f674 bpf: return EOPNOTSUPP when map lookup isn't supported
Return ERR_PTR(-EOPNOTSUPP) from map_lookup_elem() methods of below
map types:
- BPF_MAP_TYPE_PROG_ARRAY
- BPF_MAP_TYPE_STACK_TRACE
- BPF_MAP_TYPE_XSKMAP
- BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:52:20 -07:00
Prashant Bhole
509db2833e bpf: error handling when map_lookup_elem isn't supported
The error value returned by map_lookup_elem doesn't differentiate
whether lookup was failed because of invalid key or lookup is not
supported.

Lets add handling for -EOPNOTSUPP return value of map_lookup_elem()
method of map, with expectation from map's implementation that it
should return -EOPNOTSUPP if lookup is not supported.

The errno for bpf syscall for BPF_MAP_LOOKUP_ELEM command will be set
to EOPNOTSUPP if map lookup is not supported.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:52:20 -07:00
Enrico Granata
da1cf5a1cf
platform/chrome: Add a new interrupt path for cros_ec_lpc
This commit allows cros_ec_lpc to register a direct IRQ instead of relying
on the ACPI notification chain to receive MKBP events.

This change is done in the interest of allowing reduced jitter in the
communication path between the CrOS EC and the host for receiving sensor
data.

Signed-off-by: Enrico Granata <egranata@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-10-09 21:44:44 -07:00
Wenwen Wang
8af03d1ae2 bpf: btf: Fix a missing check bug
In btf_parse_hdr(), the length of the btf data header is firstly copied
from the user space to 'hdr_len' and checked to see whether it is larger
than 'btf_data_size'. If yes, an error code EINVAL is returned. Otherwise,
the whole header is copied again from the user space to 'btf->hdr'.
However, after the second copy, there is no check between
'btf->hdr->hdr_len' and 'hdr_len' to confirm that the two copies get the
same value. Given that the btf data is in the user space, a malicious user
can race to change the data between the two copies. By doing so, the user
can provide malicious data to the kernel and cause undefined behavior.

This patch adds a necessary check after the second copy, to make sure
'btf->hdr->hdr_len' has the same value as 'hdr_len'. Otherwise, an error
code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-09 21:42:51 -07:00
Benson Leung
2c42dd6e0e
Merge remote-tracking branch 'origin/ib-chrome-platform-mfd-move-cros_ec_lpc' into working-branch-for-4.20 2018-10-09 21:29:51 -07:00
Emil Karlson
d4d2313a3c
mfd: cros-ec: copy the whole event in get_next_event_xfer
Commit 57e94c8b97 caused cros-ec keyboard events
be truncated on many chromebooks so that Left and Right keys on Column 12 were
always 0. Use ret as memcpy len to fix this.

The old code was using ec_dev->event_size, which is the event payload/data size
excluding event_type header, for the length of the memcpy operation. Use ret
as memcpy length to avoid the off by one and copy the whole msg->data.

Fixes: 57e94c8b97 ("mfd: cros-ec: Increase maximum mkbp event size")

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Karlson <jekarlson@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-10-09 20:57:30 -07:00
Dmitry Osipenko
3c58776827 thermal: core: Fix use-after-free in thermal_cooling_device_destroy_sysfs
This patch fixes use-after-free that was detected by KASAN. The bug is
triggered on a CPUFreq driver module unload by freeing 'cdev' on device
unregister and then using the freed structure during of the cdev's sysfs
data destruction. The solution is to unregister the sysfs at first, then
destroy sysfs data and finally release the cooling device.

Cc: <stable@vger.kernel.org> # v4.17+
Fixes: 8ea229511e ("thermal: Add cooling device's statistics in sysfs")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-10-10 11:44:52 +08:00
Al Viro
74dd7c97ea ecryptfs_rename(): verify that lower dentries are still OK after lock_rename()
We get lower layer dentries, find their parents, do lock_rename() and
proceed to vfs_rename().  However, we do not check that dentries still
have the same parents and are not unlinked.  Need to check that...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-09 23:33:17 -04:00
Dominique Martinet
fb488fc1f2 9p/trans_fd: put worker reqs on destroy
p9_read_work/p9_write_work might still hold references to a req after
having been cancelled; make sure we put any of these to avoid potential
request leak on disconnect.

Fixes: 728356dede ("9p: Add refcount to p9_req_t")
Link: http://lkml.kernel.org/r/1539057956-23741-2-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Reviewed-by: Tomas Bortoli <tomasbortoli@gmail.com>
2018-10-10 09:14:34 +09:00
Dominique Martinet
e4ca13f7d0 9p/trans_fd: abort p9_read_work if req status changed
p9_read_work would try to handle an errored req even if it got put to
error state by another thread between the lookup (that worked) and the
time it had been fully read.
The request itself is safe to use because we hold a ref to it from the
lookup (for m->rreq, so it was safe to read into the request data buffer
until this point), but the req_list has been deleted at the same time
status changed, and client_cb already has been called as well, so we
should not do either.

Link: http://lkml.kernel.org/r/1539057956-23741-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+2222c34dc40b515f30dc@syzkaller.appspotmail.com
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
2018-10-10 09:13:30 +09:00
Dan Carpenter
72ea032108 9p: potential NULL dereference
p9_tag_alloc() is supposed to return error pointers, but we accidentally
return a NULL here.  It would cause a NULL dereference in the caller.

Link: http://lkml.kernel.org/m/20180926103934.GA14535@mwanda
Fixes: 996d5b4db4 ("9p: Use a slab for allocating requests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
2018-10-10 09:13:20 +09:00
David S. Miller
7c26701a77 sparc: Wire up io_pgetevents system call.
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-09 16:52:38 -07:00
Manasi Navare
1e712535c5 drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
This patch fixes the original commit c0cfb10d9e ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.

v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally

Fixes: c0cfb10d9e ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com
2018-10-09 15:46:42 -07:00
Rex Zhu
71195ba670 drm/amdgpu: Change VI gfx/sdma/smu init sequence
initialize gfx/sdma before dpm features enabled.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:08:25 -05:00
Rex Zhu
9d5aa2ef38 drm/amdgpu: Add fw load in gfx_v8 and sdma_v3
gfx and sdma can be initialized before smu.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:08:17 -05:00
Rex Zhu
9c8bc8d339 drm/amd/pp: Implement load_firmware interface
with this interface, gfx/sdma can be initialized
before smu.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:08:10 -05:00
Rex Zhu
744a522794 drm/amd/pp: Allocate ucode bo in request_smu_load_fw
ucode bo is needed by request_smu_load_fw,
the request_smu_load_fw maybe called by gfx/sdma
before smu hw init.
so move amdgpu_ucode_bo_init to request_smu_lowd_fw
from smu hw init.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:08:04 -05:00
Rex Zhu
07da6aa47f drm/amdgpu: Don't reallocate ucode bo when suspend
driver don't release the ucode memory when suspend. so don't
need to allocate bo when resume back.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:57 -05:00
Rex Zhu
9b008fb7ed drm/amdgpu: Remove FW_LOAD_DIRECT type support on VI
AMDGPU_FW_LOAD_DIRECT is used for bring up.
Now it don't work any more. so remove the support.

v2: Add warning message if user select
   AMDGPU_FW_LOAD_DIRECT/AMDGPU_FW_LOAD_PSP on VI.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:49 -05:00
James Zhu
825da4d925 drm/amdgpu/vcn:Correct VCN cache window definition
Correct VCN cache window definition. The old one
is reused from UVD, and it is not fully correct.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:39 -05:00
James Zhu
b17c524922 drm/amdgpu/vcn:Replace value with defined macro
Replace value with defined macro to make
code more readable

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:33 -05:00
James Zhu
2dc4aa523b drm/amdgpu/vcn:fix dpg pause mode hang issue
Use mmUVD_SCRATCH2 tracking decode write point.
It will help avoid dpg pause mode hang issue.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:26 -05:00
James Zhu
9332ddc915 drm/amdgpu/vcn:Remove unused code
The following WREG32_SOC15_DPG_MODE will overwrite register
mmUVD_CGC_CTRL. This code can be removed.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:19 -05:00
Nick Alcock
59d76d6bc2 drm/radeon: ratelimit bo warnings
So a few days ago I started getting sprays of these warnings --
sorry, but because it was a few days ago I'm not sure what I was
running at the time (but it was probably either Stellaris or Chromium).

Sep 25 22:06:34 mutilate err: : [  544.718905] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.718909] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.719710] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.719714] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.719862] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.719865] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.720772] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.720778] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate warning: : [  544.721415] radeon 0000:01:00.0: vbo resource seems too big for the bo

followed by a massive stream of "vbo resource seems too big for the bo".

The most extreme flood ran from 23:01:58 to 23:02:47 and emitted 91,000
lines of log in that time.  This... seems excessive, given that each log
message after the first contains more or less no information.

So ratelimit these messages. (We probably want to see at least *some* so
that the underlying bug can be fixed -- always assuming the bug isn't in
unfixable closed-source game code somewhere.)

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:12 -05:00
Christian König
4eb10b5be7 drm/amdgpu: fix incorrect use of amdgpu_irq_add_id in si_dma.c
Adding a second irq source because of a different src_id is actually a
bug.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:07:05 -05:00
Christian König
2ccecaf661 drm/amdgpu: fix AGP location with VRAM at 0x0
That also simplifies handling quite a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:06:58 -05:00
Shirish S
bdbb4d6e96 drm/amdgpu: remove the intterupt handling for the KIQ events
[Why]
1. we never submit IBs to the KIQ
2. there seems to be ~500ms delay during amdgpu resume spent in KIQ,
   hence pointing toward interrupts are not working correctly.

[How]
remove interrupt handling for KIQ.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>i
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:06:26 -05:00
Felix Kuehling
1b19aa5aa8 drm/amdkfd: Fix incorrect use of process->mm
This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:06:19 -05:00
Pratik Vishwakarma
158b594a96 drm/amdgpu: skip IB tests for KIQ in general
[Why]
1. We never submit IBs to KIQ.
2. Ring test pass without KIQ's ring also.
3. By skipping we see an improvement of around 500ms
   in the amdgpu's resume time.

[How]
skip IB tests for KIQ ring type.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:06:12 -05:00
Nathan Chancellor
c1f0320e03 drm/scheduler: Simplify spsc_queue_count check in drm_sched_entity_select_rq
Clang generates a warning when it sees a logical not followed by a
conditional operator like ==, >, or <.

drivers/gpu/drm/scheduler/sched_entity.c:470:6: warning: logical not is
only applied to the left hand side of this comparison
[-Wlogical-not-parentheses]
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^                                     ~~
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
after the '!' to evaluate the comparison first
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^
             (                                        )
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
around left hand side expression to silence this warning
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^
            (                                    )
1 warning generated.

It assumes the author might have made a mistake in their logic:

if (!a == b) -> if (!(a == b))

Sometimes that is the case; other times, it's just a super convoluted
way of saying 'if (a)' when b = 0:

if (!1 == 0) -> if (0 == 0) -> if (true)

Alternatively:

if (!1 == 0) -> if (!!1) -> if (1)

Simplify this comparison so that Clang doesn't complain.

Fixes: 35e160e781 ("drm/scheduler: change entities rq even earlier")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:06:00 -05:00
Rex Zhu
5e161e5442 drm/amd/pp: Refine smu7/8 request_smu_load_fw callback function
The request_smu_load_fw of VI is used to load gfx/sdma
ip's firmware.

Check whether the gfx/sdma firmware have been loaded successfully
in this callback function.
if failed, driver can exit to avoid gpu hard hung.
if successful, clean the flag reload_fw to avoid duplicated fw load.
when suspend/resume, driver need to reload fw.
so in suspend, reset the reload_fw flag to true to enable load fw when
resume.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:05:53 -05:00
Rex Zhu
0a821579a2 drm/amd/pp: Setup SoftRegsStart before request smu load fw
need to know SoftRegsStart value to visit the register
UcodeLoadStatus to check fw loading state.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:05:47 -05:00
Rex Zhu
bcb7c4e8b4 drm/amd/pp: Refine function iceland_start_smu
if upload firmware failed, no matter how many times
the function runs again, the same error will be encountered.
so remove the duplicated code.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:05:40 -05:00
Rex Zhu
44779b43f1 drm/amdgpu: Move gfx flag in_suspend to adev
Move in_suspend flag to adev from gfx, so
can be used in other ip blocks, also keep
consistent with gpu_in_reset flag.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09 17:05:33 -05:00